Exercício aeróbico, resistência de artéria carótida e autonomia funcional em mulheres idosas

Este estudo teve como objetivo analisar os efeitos de um programa de exercício físico aeróbico sobre o índice de resistência da artéria carótida interna direita (IRCID) e os níveis de autonomia funcional de mulheres idosas. A amostra foi constituída por 25 idosas sedentárias, com idade entre 60 e 75 anos, divididas em dois grupos: grupo experimental com 14 idosas submetidas ao treinamento aeróbico e grupo controle (n=11). A avaliação da resistência da artéria carótida foi realizada pelo método de ultrasom Doppler e a autonomia funcional pelos testes: caminhar 10m (C10m), levantar da posição sentada (LPS), levantar-se da cadeira e locomover-se pela casa (LCLC), levantar-se da posição decúbito ventral (LPDV) e vestir e tirar a camisa (VTC). O treinamento aeróbico foi realizado na forma de caminhada, 30 minutos por dia, 3 vezes por semana, durante 3 meses. Para o controle da intensidade da caminhada foi utilizado o índice de esforço percebido, com valores padronizados pela escala de Borg onde a intensidade deveria corresponder a uma faixa entre os valores 13 a 15 pontos, correspondente a uma situação orgânica derivada de um exercício compreendido como ligeiramente cansativo e a frequência cardíaca de treino (FCT) entre 50% a 80% da frequência cardíaca de reserva. Para analise estatística foi utilizado a ANOVA de medidas repetidas. O grupo experimental quando comparados com o grupo controle obteve uma diminuição estatisticamente significativa na resistência da artéria carótida interna direita (p=0,021), e um aumento significativo nos testes: C10m (p=0,000), LPS (p=0,035) e no LCLC (p=0,016). Estes resultados sugerem que a prática de exercícios físicos aeróbicos foi eficaz em diminuir o IRCID e melhorar os níveis de autonomia funcional em mulheres idosa

Medidas de parâmetros morfológicos e funcionais do Coração em brasileiros: um subestudo do primeiro registro multicêntricos latino-americano em ressonância magnética cardiáca

There is no data about cardiac measurements em Brazilians obtained by CMR. This a muldisciplinary study with the objective of obtaining measurements of the left ventricle (LV) and right ventricle (RV) diastolic diameter (Dd), systolic diameter (Ds), diastolic volume (Dv), systolic volume (Sv), ejection fraction (EF) and myocardial mass in Brazilians. One hundred and seven (54 men and 53 women, mean age of 43.4 ± 13.1 years) asymptomatic individuals without heart disease were submitted to cardiac magnetic resonance (cMR) studies using steady state free precession technique. The means and standard deviations of the parameters of the LV and RV were respectively: LVDD = 4,8 ± 0,5 cm; LVSD = 3,0±0,6 cm; LVDV = 128,4±29,6 ml; LVSV = 45,2±16,6 ml; LVEF = 65,5±6,3%; LV mass = 95,2±30,8.1 g; RVDD = 3,9±1,3 cm; RVSD = 2,5±0,5 cm; RVDV = 126,5±30,7 ml; RVSV = 53.6±18,4 ml; RVEF = 58.3±8,0.0% and RV mass = 26,1±6,1 g. The masses and volumes were significantly higher in men, except for the LVSV. The RV EF was significantly higher in women. There was inverse correlation between RV systolic volume and with age, being more significant in men. This study describes for the first time benchmarks for cardiac measurements obtained by CMR among asymptomatic Brazilians individuals without heart disease and demonstrated differences according to sex and age

Satisfação do paciente com a fisioterapia :tradução, adequação cultura e validação de um instrumento de medida

The measurement of patient satisfaction can provide information about the success of the care provider in reaching the values and meeting the expectations of the patient. The purpose of this study was to translate into the Portuguese language and to culturally customize to the Brazilian population the instrument to measure patient satisfaction with physical therapy elaborated by Goldstein et al. The study sample was made up of 279 patients who were undergoing physical therapy treatment at 39 different private clinics in a middle-sized town in northeastern Brazil. For the translation of the survey instrument, the back-translation technique was employed, in association with the bilingual method. The reliability and validity of the Brazilian version of the instrument were both assessed. Reliability analysis, carried out with the computation of Cronbach alpha coefficients, showed that the measures obtained with the instrument have a high degree of internal consistency. The aspects dealing with the patient therapist relationship are the most important predictors of satisfaction, followed by those dealing with courtesy, privacy, and practical aspects such as efficiency of the facility in the patient admissions process, setting up of appointments, and waiting time in waiting room. Items dealing with aspects such as location of the facility and availability of parking facilities may underestimate the reliability of the instrument. This study translated, culturally customized, and validated an instrument to measure patient satisfaction with physical therapy originally developed in English. By so doing, this study has made this instrument available to the Brazilian society, and it has rendered it a useful parameter that can be utilized in our country in the field of physical therapy

Medidas antropométricas e avaliação do perfil lipídico de indivíduos obesos e com sobrepeso residentes no Estado do RN

Overweight and obesity are defined as abnormal or excessive fat accumulation that may impair health. Obesity significantly increases the risk of developing numerous medical conditions, besides is associated with shortened life span. The objective of this study was to evaluate the anthropometric measurements and lipid profile in adult overweight and obese subjects residents in the state of Rio Grande do Norte. The methodology was the analysis of certain biochemical parameters in serum of individuals and a physical evaluation that consisted of measurements of blood pressure and anthropometric data. In addition, the volunteers of the research answered a questionnaire about personal, social and clinical data. 1741 samples were collected, of which 432 (24,8%) were obese. Of these, 280 were selected to participate in the study, including 118 (42,1%) men and 162 (57,9%) women. Of the remaining 1309 individuals, 731 (55,8%) were overweight. Among them, 179 (24.5%) were analyzed in this study, with 56,4% female. Of the remaining 578 normal individuals, 143 were selected as controls in the research. Amid the obese, overweight and eutrophic, there were respectively 10% vs 5% vs 5,6% of diabetics, 92,1% vs 85,5% vs 68,7% of dyslipidemics and 38,6% vs 22,3% vs 15,6% of hypertensive patients. The degree of obesity presented by the participants was varied, with the majority (72,8%) fall into grade I obese, 22,9% (64) in grade II and only 4,3% (12) in grade III. Mean anthropometric participants showed statistically significant differences between groups eutrophic, overweight and obese on the BMI, WC, WHR and %BF and between sexes in CC, WHR and %BF. As the mean serum biochemical parameters to evaluate the lipid profile showed significant differences between groups eutrophic, overweight and obese, unless the exception of HDL among overweight and obese. The significance level was 5% (p <0.05)

Preparação e caracterização de sistemas emulsionados contendo benznidazol

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Dignidade da pessoa humana e medidas sócio-educativas do Estatuto da Criança e do Adolescente

The main goal of this work is to verify the presence of the principle of human dignity, determined by the Constitution of 1988, when Socio Educational Acts from the Statute of Children and adolescent were put in practice, focusing on the treatment designated to the youth whose acts were against the law in the city of Natal, as well as the difficulties to match the legal texts and its reality. It is common knowledge that the law for children and adolescent was based in the principle of human dignity, for its institutes say so. But would the Law match the practice of Socio Educational Acts? Or this law would be an example of good intentions that never left the paper and became reality? First there is an approach on the human dignity principle, with its definition and limitation, according to a theory about the theme. Afterwards it is made a connection between human rights and the principle of human dignity considering historical and social features, for the law is also a reflect of these transformations, we try to show the different laws the country had until today, concerning the children inflicted by poverty and those whose acts were against the law, since the rodas dos expostos, the phase of irregular situation, in which the children were arrested simply because they were beggars, until present time. The theory aspects are shown beside a field research made with the adolescent and staff from CEDUC/Natal, producing a critical view about the subject and showing some solutions for the problems found. At last, it is made a critical analyses of the problems detected on the field research, and, in some cases, a suggestion is given to change the reality

A teoria de Dienes no ensino de transformação de medidas de comprimento, área e volume no curso de pedagogia

The study was aimed to test a teaching module on the Zoltan Paul Dienes theory, focusing on the content: The transformation of measurements: length, areas and volumes. The study based on constructivist theory consisted in a methodological intervention with students of the 7th period of the Course of Pedagogy, in Central Campus, Federal University of Rio Grande do Norte (UFRN). A preliminary study with 40 students called diagnostic evaluation found that students did not understand the concept of measurements transformation and its processing steps. The latter was performed only with the help of the table of measurements transformation with no understanding of the content. He applied a pretest, a set of activities and a post-test. The latter was used as a tool for evaluation of the student learning process. The answers of these ones were evaluated according to the concept of reflective abstraction of Jean Piaget, one of the authors who influenced the Dienes theory

Desenvolvimento e validação de protótipo das medidas de desenvolvimento humano

To mesure the human performance is a challenge, mainly due to the multidimensional factor movement. Instruments, mostly only assess one dimension of it. Objective: To develop a prototype capable of measuring the skills of human performance and check its validity using method comparison approach. Methods: The study was divided into two stages. The first Prototype was developed and tested simultaneously with an instrument to study the Rectilinear Uniform Motion and Uniformly Miscellaneous. In the second phase the sample consisted of Paralympic basketball athletes (n=09) and karate athletes (n=31) and all agreed to the terms of participation in the research. The evaluation of performance measures was performed with the prototype, the results obtained were compared with the data calculated by a statistical package is used as a reference. Results: All variables calculated by the prototype showed no significant differences when compared with the results calculated by the reference instrument and statistical package. Conclusion: The prototype has been developed and the results obtained in laboratory and field indicate that the prototype can be used for measuring human performance measures, with immediate results without the need for a conventional computer return, provided they fulfill the criteria described

Algoritmos inteligentes para auto-correção, auto-verificação e auto-validação de medidas em sensores

This work presents a set of intelligent algorithms with the purpose of correcting calibration errors in sensors and reducting the periodicity of their calibrations. Such algorithms were designed using Artificial Neural Networks due to its great capacity of learning, adaptation and function approximation. Two approaches willbe shown, the firstone uses Multilayer Perceptron Networks to approximate the many shapes of the calibration curve of a sensor which discalibrates in different time points. This approach requires the knowledge of the sensor s functioning time, but this information is not always available. To overcome this need, another approach using Recurrent Neural Networks was proposed. The Recurrent Neural Networks have a great capacity of learning the dynamics of a system to which it was trained, so they can learn the dynamics of a sensor s discalibration. Knowingthe sensor s functioning time or its discalibration dynamics, it is possible to determine how much a sensor is discalibrated and correct its measured value, providing then, a more exact measurement. The algorithms proposed in this work can be implemented in a Foundation Fieldbus industrial network environment, which has a good capacity of device programming through its function blocks, making it possible to have them applied to the measurement process

Avaliação por pig de perfilagem de danos superfciais nos materiais das paredes de dutos de petróleo

The modern technology of materials and structural integrity of pipelines requests the use of inspection tools named inspection pigs to detect, localize and measure the length, width and depth dimensions of the thickness losses of walls of buried and underwater pipelines in service. These tools run them internally, performing and recording measurements, with performance that varies according to the pig s technology. It has been developed recently an instrumented pig technology, called feller pig. This work aims to indicate factors that influence the feller pig technology performance in the detection and in the accuracy of measurement of the length, width and depth dimensions of the thickness losses on the internal surface of an oil pipeline wall under normal conditions of oil pipe inspection with pig. In this work, is made a collection of factors and an analyses of the technology based on the available literature, as well as an experiment to observe the technology and the factors operating. In the experiment, a feeler pig is used in a pipeline built in carbon steel and in operation that flows petroleum, in witch are observed areas with internal thickness losses occurred naturally. Some of these areas and their dimensions taken by automated ultra-sound scanner are compared with the ones indicated by the feller pig. Based on the data collection, on the analysis and on the experiment, the influence of factors object of this research is discussed. It is concluded that, among these, there are factors related to pipe fabrication tolerances, to wear of pig components, to internal adhesive wear of pipeline, to other pipeline damages and to technology characteristics. Finally, actions are suggested to know better, improve and define the applicability of this technology

Resposta térmica de um compósito PEEK+PTFE+Fibra de carbono+grafite

Composites based on PEEK + PTFE + CARBON FIBER + Graphite (G_CFRP) has increased application in the top industries, as Aerospace, Aeronautical, Petroleum, Biomedical, Mechanical and Electronics Engineering challenges. A commercially available G_CFRP was warmed up to three different levels of thermal energy to identify the main damage mechanisms and some evidences for their intrinsic transitions. An experimental test rig for systematize a heat flux was developed in this dissertation, based on the Joule Effect. It was built using an isothermal container, an internal heat source and a real-time measurement system for test a sample by time. A standard conical-cylindrical tip was inserted into a soldering iron, commercially available and identified by three different levels of nominal electrical power, 40W (manufacturer A), 40W (manufacturer B), 100W and 150W, selected after screening tests: these power levels for the heat source, after one hour of heating and one hour of cooling in situ, carried out three different zones of degradation in the composite surface. The bench was instrumented with twelve thermocouples, a wattmeter and a video camera. The twelve specimens tested suffered different degradation mechanisms, analyzed by DSC (Differential Scanning Calorimetry) and TG (Thermogravimetry) techniques, Scanning Electron Microscopy (SEM) and Energy-Dispersive X-Rays (EDX) Analysis. Before and after each testing, it was measured the hardness of the sample by HRM (Hardness Rockwell M). Excellent correlations (R2=1) were obtained in the plots of the evaporated area after one hour of heating and one hour of cooling in situ versus (1) the respective power of heat source and (2) the central temperature of the sample. However, as resulting of the differential degradation of G_CFRP and their anisotropy, confirmed by their variable thermal properties, viscoelastic and plastic properties, there were both linear and non-linear behaviour between the temperature field and Rockwell M hardness measured in the radial and circumferential directions of the samples. Some morphological features of the damaged zones are presented and discussed, as, for example, the crazing and skeletonization mechanism of G_CFRP

O Ensino de medidas e grandezas através de uma abordagem investigatória

This work relates our experience in an investigative practice in the classroom, carried out in State School Jorge Fernandes , located in Natal - RN, having as objective to validate the applying of a education module about Measures and Largenesses in Primary Teaching. We used the constructivist approach; using to Richard s Skemp (1980) theory in order to explicit the students learning according to their comprehension levels. Initially, we carry out an exploratory research to check the participant s previous knowledge. Then, we developed an intervention to validate an education module, structured from needs pointed out from results of the initial research, analyzing the students advances through the final evaluation, displaying growth stages of group front to the knowledge about the matter approached. Finally, we presented our reflections about our experience; putting forward suggestions of the teachers activities, aiming at contributing to the improvement of their practices in classroom during the approach of subject for us investigated

Geometrias não-eucludianas como anomalias: implicações para o ensino de geometria e medidas

This present research the aim to show to the reader the Geometry non-Euclidean while anomaly indicating the pedagogical implications and then propose a sequence of activities, divided into three blocks which show the relationship of Euclidean geometry with non-Euclidean, taking the Euclidean with respect to analysis of the anomaly in non-Euclidean. PPGECNM is tied to the line of research of History, Philosophy and Sociology of Science in the Teaching of Natural Sciences and Mathematics. Treat so on Euclid of Alexandria, his most famous work The Elements and moreover, emphasize the Fifth Postulate of Euclid, particularly the difficulties (which lasted several centuries) that mathematicians have to understand him. Until the eighteenth century, three mathematicians: Lobachevsky (1793 - 1856), Bolyai (1775 - 1856) and Gauss (1777-1855) was convinced that this axiom was correct and that there was another geometry (anomalous) as consistent as the Euclid, but that did not adapt into their parameters. It is attributed to the emergence of these three non-Euclidean geometry. For the course methodology we started with some bibliographical definitions about anomalies, after we ve featured so that our definition are better understood by the readers and then only deal geometries non-Euclidean (Hyperbolic Geometry, Spherical Geometry and Taxicab Geometry) confronting them with the Euclidean to analyze the anomalies existing in non-Euclidean geometries and observe its importance to the teaching. After this characterization follows the empirical part of the proposal which consisted the application of three blocks of activities in search of pedagogical implications of anomaly. The first on parallel lines, the second on study of triangles and the third on the shortest distance between two points. These blocks offer a work with basic elements of geometry from a historical and investigative study of geometries non-Euclidean while anomaly so the concept is understood along with it s properties without necessarily be linked to the image of the geometric elements and thus expanding or adapting to other references. For example, the block applied on the second day of activities that provides extend the result of the sum of the internal angles of any triangle, to realize that is not always 180° (only when Euclid is a reference that this conclusion can be drawn)

Medidas e análise estatística em sinais bioelétricos sobre pontos de acupuntura

In the 20th century, the acupuncture has spread on occident as a complementary practice of heath care. This fact has motivated the international scientific community to invest in research that seek to understand why acupuncture works. In this work we compare statistically volt age fluctuation of bioelectric signals caught on the skin at an acupuncture point (IG 4) another nearby on acupuncture point. The acquisition of these signals was performed utilizing an electronic interface with a computer, which was based on an instrumentation amplifier designed with adequate specifications to this end. On the collected signals from a sample of 30 volunteers we have calculated major statistics and submitted them to pairing t-test with significance leveI a = O, 05. We have estimated to bioelectric signals the following parameters: standard deviation, asymmetry and curtose. Moreover, we have calculated the self-correlation function matched by on exponential curve we have observed that the signal decays more rapidly from a non-acupoint then from an acupoint. This fact is an indicative of the existence of information in the acupoint

Caracterização e aplicação de sistemas micelares e microemulsionados como inibidores de corrosão

Corrosion is an important phenomenon that frequently occurs in the oil industry, causing surface ablation, such as it happens on the internal surfaces of oil pipes. This work aims to obtain new systems to reduce this specific problem. The surfactants SDS, CTAB, and UNITOL L90 (in micellar and microemulsionated systems) were used as corrosion inhibitors. The systems were obtained using a C/S ratio of 2, butanol as cosorfactant, kerosene as oil phase and, as water phase, NaCl solutions of 0.5M with pH = 2, 4, and 7. Microemulsion regions were found both for direct and inverse micelles. SDS had the higher microemulsion region and the area was not dependent of pH. The study of micellization of these surfactans in the liquid-gas interface was carried out via the determination of CMC from surface tension measurements. Regarding microemulsionated systems, in the case of CTAB, CMC increased when pH was increased, being constant for SDS and UNITOL L90. Concerning micellar systems, increase in pH caused decrease and increase in CMC for SDC and CTAB, respectively. In the case of UNITOL L90, CMC was practically constant, but increased for pH = 4. The microemulsionated systems presented higher CMC values, except for UNITOL L90 L90. The negative values of free energy of micellization indicated that the process of adsorption was spontaneous. The results also indicated that, comparing microemulsionated to systems, adsorption was less spontaneous in the case of SDS and CTAB, while it did not change for UNITOL L90. SAXS experiments indicated that micelle geometry was spherical, existing also as halter and flat micelles, resuting in a better inght on the adsorption at the liquid-solid interface. Efficiency of corrosion inhibition as determined by electrochemical measurements, from corrosion currents calculated from Tafel extrapolation indicuting heat showed surfactants to be efficient even at low concentrations. Equilibrium isotherm data were fitted to the Freundlich model, indicating that surfactant adsorption occurs in the form of multilayers