Estado desenvolvimentista e o Nordeste :o BNB na busca de um modelo de desenvolvimento regional

This research tried to follow up with the way of intervention that a developing State promotes it regional development, once its action departs from a quantitative conception until its acting focused in maintenance, like the strategy of local development input in the Northeastern of Brazil in the 90 s. particularly, the attention was focused onto Banco do Nordeste which, between 1995 and 2002, achieved a organization changing process to get fit itself to the new conception of development and State, that advocates the maintenance and the participation of the society in its accomplishment, becoming itself the main agent of the Federal Government in the Region. By taking over the strategy of local development, Banco do Nordeste starts, at least in speech, to be less of a bank to become more of a development agent , representing some development and hope to overcome the social and economical inequalities of the Region. The hypothesis that surrounds this essay is that this reorientation experienced at Banco do Nordeste is related to three factors: timing; the Institution of a project of international technical cooperation with PNUD; the unrest of an employees group, who used to fight for the acting increase of the Bank to beyond the credit acting; and, above all, the juncture created in Ceara from the second half of the 80 s, expressed, mainly, for the political rise of a group of businessmen, who took over and modernized the standards of public management in the State, transforming the cearense experience into reference in Brazil and the world. The research was developed from information got through the use of semi-structured interviews and documental research and, as complementary resource, field observation. The interviews were done with BNB managers between 1995 and 2003, some of them current administrators (2003-2006), plus one of CAPEF directors and the present president of AFBNB. The research revealed that strategic place taken by BNB in the period studied did not come to represent a rupture in its organizational culture, being strongly attached to factors that allows its operation. When some of these elements stopped existing, it was observed a retracing in the pattern of state intervention in the Region. This conclusion restates the vision of State that guided this thesis, identified as relationships field, of different interests; space where social conflicts are established; incarnated through the institutions

Vitrine das letras: o discurso jornalístico e a modernidade pedagógica em Sergipe/Brasil e Portugal - (1910-1920)

Dans cette étude, j'ai eu comme objectif d'établir les connexions et/ou les non-connexions dans les discours journalistiques sur la modernité pédagogique, dans les journaux O Correio de Aracaju (Le Courrier d'Aracaju, Sergipe, Brésil) et O Século (Le Siècle, Portugal), dans la période 1910-1920. J'ai tout particulièrement cherché le dit dans les journaux, dans le sens foucaldien du terme, en continu dialogue avec d'autres auteurs, dans une perspective interdisciplinaire. J'ai tenté de répondre à mon interrogation initiale : quelles sont les connexions et non connexions que l'on pourrait établir entre l'École Moderne du Portugal et celle de Sergipe, au Brésil, en prenant comme source d'analyse les discours journalistiques dans des journaux des deux pays ? Á partir de ce questionnement, à travers un abordage historico-comparatif interculturel, j'ai soutenu la THÈSE que les discours journalistiques du Século et du Correio de Aracaju, bien qu'ils relèvent de genres journalistiques différents quant au niveau de développement de la presse, ont traduit une perception et une assimilation de la modernité pédagogique articulées à une même epistémè. Ainsi, ces discours ont émergé comme objets métis, dont la création s'est faite dans des interlocutions, échanges, impositions et débats dans un processus continu de communication interculturelle. La nature messianique de ces discours, dans le système d'idées républicain, traduisait le sens de la modernité pédagogique prétendue et diffusée par les textes qui exprimaient l'aspiration de rupture et de progrès, tant au Portugal que dans l'état brésilien de Sergipe. Il a également été possible de faire des approximations/comparaisons entre la dispute (article d'opinion), dans le Correio de Aracaju et l'enquête (interview et reportage), dans O Século et de souligner ainsi les connexions et/ou non-connexions présentes sur le thème de la modernité pédagogique dans les discours journalistiques

Ensino de Entropia: um enfoque histórico e epistemológico.

The rational construction necessary to systematize scientific knowledge in physics, introduces difficulties of understanding in some of its concepts. One of these concepts which exemplify properly this difficulty in learning or teaching is entropy. This thesis propose the construction of a didactic route which constitute itself a historical and epistemological course to entropy, intending to contribute for teaching this concept as well as other physics concepts. The basic assumption to build this route is that through the historical review of the development of this concept in the way suggested by Bachelard s (1884-1962) epistemology it is possible to make subjects, to be taught and learned, more meaningful. Initially I composed a brief biographical note to give the reader an idea about the issues, interests and reflections, related to science, and how I dealt with them in my private and professional life, as well as the role they played to lead me to write this thesis. The strategy to construct the route to entropy was to split the usual contents of basic thermodynamics in three moments in a way they can constitute epistemological units , which can be identified by the way of thinking in the corresponding moments of scientific knowledge production: a technical and empiricist moment, a rationalist and positivist moment and a post-positivist rationalist one. The transition between each moment is characterized by a rupture with the former way of thinking; however the progress in the construction of knowledge in the area is evident. As the final part of this work I present an analysis based on elements of Bachelard s epistemology that are present in each moment. This analysis is the basic component of the didactic route that I propose myself to build. The way I made this route guide to entropy could contribute to the construction of other didactic routes in physics and other sciences, in a way to unveil hidden meanings and as a tool to humanize scientific knowledge.

As coisas estão no (meu) mundo, só que eu preciso aprender. Autobiografia, reflexividade e formação em Educação Nutricional

This paper gives clues for the educative action in nutrition subjects. It deals about the professors experiences deployments lived in 2003 e 2004, both in Nutrition undergraduate course of the Federal University of the Rio Grande do Norte (UFRN), in Nutrition Education and Supervised Internship in Social Nutrition academic disciplines, as well as in the II Update Course in Nutrition Practices for Health Basic Care , offered to the supervisors nutritionists of internship, in this same department, being able to be characterized as an action-research, with interventionism purpose. The study stands out the importance of a new point of view about the nutritionist formation to overcome the limits imposed by the scientism, and the adoption of a complex and reflexive reference about the educational practice in this area. The corpus is made up by 81 undergraduate students alimentary autobiography (source of generating subjects for interventions with the nutritionists), 17 questionnaires and 05 interviews, being 03 of them biography (the start up for an initial dialogue with the nutritionists). The data found and the professors experiences allied to a theoretic reference, by the light of the education proposals for the XXI century were used as establishment elements for the proposition of five guidance axles used to build a complex and reflexive nutrition education, which are: 1) Take the cookery and the culture of eating together as significant elements for the human being integral formation; 2) Conceive the religion manifestations associated to feeding process as relevant elements of the human food culture; 3) Discuss the rupture nature/culture aiming the preservation of live in earth; 4) Search for the overcoming of the identity conflicts by a higher inclosing conscience degrees of being part of this process. 5) Face the limits of fragmented formation. The presented thesis stands that the autobiography method, allied to the freirean pedagogy and to a complex reference, could be taken as an important tool to the health educative subjects, contributing to the formation of reflective individuals able to transform themselves and the world.

Modelos para análise e dimensionamento de painéis de alvenaria estrutural

The main objective of this thesis was the study of bracing panels of structural masonry, by applying the Finite Element Method and Strut and Tie Method. It was analyzed the following aspects: the effect of orthotropy on the behavior of the panels; distribution of horizontal forces between panels for buildings; comparison between Equivalent Frame and Finite Elements models; panels design with the Strut and Tie Method. The results showed that one should not disregard the orthotropy, otherwise this can lead to models stiffer than the real. Regarding the distribution of horizontal forces, showed that the disregard of lintels and shear deformation leads to significant differences in the simplified model. The results showed also that the models in Finite Element and Equivalent Frame exhibit similar behavior in respect to stiffness of panels and stress distribution over the sessions requested. It was discussing criteria for designing Strut and Tie Method models in one floor panels. Then, the theoretical strength these panels was compared with the rupture strength of panels tested in the literature. The theoretical maximum strength were always less than the rupture strength of the panels obtained in tests, due to the fact that the proposed model cannot represent the behavior of the masonry after the start of the panel cracking due to plasticization of the reinforcement

Provas de carga estática com carregamento lateral em estacas escavadas hélice contínua e cravadas metálicas em areia

An experimental study has been conducted to investigate the behavior of continuous flight auger (cfa) bored piles and metalic driven H-section piles under lateral loading in cohesionless soils. The piles were tested in two different areas at the same site. Both areas consisted of a 3-m thick compacted superficial fill of pure fine sand, underlain by layers of naturally occurring pure fine-thick sand. Fills are differentiated by the relative densities which were compressed, 45% e 70%, respectively. Each area received one identical pair of cfa piles and two identical pairs of H-piles. A static lateral loading test was performed in each pair of piles. In this work, the pile load test results are reported and interpreted. The horizontal coefficient of subgrade reaction was determined from the results of the loading tests and compared with values determined by correlations based on penetration resistance index of SPT tests (NSPT). p-y formulations describing the static behavior of the piles were applied to the problem under evaluation. Back Analyses were made through theoretical and experimental p-y curves for obtaining input parameters for the analytic models, among which the coefficient of horizontal reaction. The soil pile system horizontal loading at rupture was determined by the theoretical methods and the results were compared with the experimental results, checking its validity

Estudo do efeito da substituição de caulim por resíduo de caulim na fabricação de cerâmica de revestimento

Companies involved in kaolin mining and treatment represent an important area of industrial development in Brazil, significantly contribution to the worldwide production of such mineral. As a result, large volumes of kaolin residue are constantly generated and abandoned in the environment, negatively contributing to its preservation. In this scenario, the objective of the present study was to characterize the residue generated from kaolin mining as well as to assess its potential use as raw material for the production of ceramic tiles. Ceramic mixtures were prepared from raw materials characterized by X-ray fluorescence, X-ray diffraction, particle size analysis and thermal analysis. Three compositions were prepared using kaolin residue contents of 10%, 20% and 30%. Samples were uniaxially pressed, fired at 1200ºC and characterized aiming at establishing their mineralogical composition, water absorption, apparent porosity, specific mass, linear retraction and modulus of rupture. The results showed that the residue basically consisted of kaolinite and successfully replaced raw kaolin in the preparation of ceramic title formulations without significantly affecting the properties of the fired material

A influência da adição de caulim, quartzo e feldspato potássico na formulação de massas cerâmicas para telhas: Modelo estatístico

The production of roof tiles in the state of Rio Grande do Norte accounts for around 60% of the total of ceramic pieces produced. There is a need for investment to improve quality and productivity, thereby promoting technological innovations. Accordingly, the aim of this study is to determine the effect of kaolin, potassium feldspar and quartz in two standard formulations, as well as the effect of sintering temperature on the technological properties of linear firing shrinkage, water absorption and bending rupture stress, by fitting the statistical model and using multiple linear regression to assess the relationship between technological properties and independent variables. The raw materials were characterized using the following techniques: X-ray fluorescence (XRF), X-ray diffraction (XRF), rational analysis (RA), differential thermal analysis (DTA) and granulometric analysis (GA). The test specimens were compacted by uniaxial pressure (25 MPa), dried in a stove at 110 ºC for 24 hours and sinterized at 850 ºC, 950 ºC and 1050 ºC and held isothermal for 30 minutes. The results obtained indicate that the addition of kaolin to two standard formulations (M and R) promoted a reduction in water absorption values and an increase in bending rupture stress values. The sintering temperatures for group M that resulted in the lowest linear firing shrinkage and water absorption values were 850 ºC and 950 ºC, respectively, and the highest bending rupture stress values were reached at a temperature of 950 ºC. In the case of group R, the sintering temperature that obtained the lowest water absorption and linear firing shrinkage values was 850 ºC, and the highest bending rupture stress values were attained at a temperature of 1050 ºC. This work explains the statistical approach used to fit the model that describes the relationship between the technological properties and percentage of kaolin, quartz and feldspar, as well as the models that enable predictions, provided that the lower and upper limits of the percentage of clay minerals, flux and quartz used in this study are respected. Statistica 6 software was used and results were obtained by stepwise forward regression

Caracterização de matérias-primas regionais e desenvolvimento de formulações de massas cerâmicas para porcelanato

Initially concentrated in some poles at the South and Southeast regions of Brazil, the ceramic tiles industry became wide during the 80 s decade, with a disconcentration industrial and regional pulverization. The competitiveness in the ceramic tiles internal and external consumers markets, it has debtor the industries to invest in sophisticated products each time more, either in design or the technology, but, mainly, in its final properties. Amongst the diverse types of ceramic coating, the porcelanato if has detached had to its process of technological production and excellent characteristics techniques. The Porcelanato is currently the material for coatings that presents the best technical and aesthetic features when compared with others ceramics found on the market. The chemical composition and the others raw materials characteristics have an importance that must to be ally to the inherent characteristics of fabrication process, essentially those related to the cycle of burning. This work had as purpose to develop formularizations of ceramic mass for production of porcelanato without glass coating, pertaining to the group BIa (text of absorption of water ≤ 0.5%) and with resistance superior mechanics 35MPa from raw materials characterized. The ceramic raw materials selected to the development of this study (A1 and A2 clays, feldspate, talc and quartz) were submitted to the following tests: X-ray fluorescence - chemical analysis determination; X-ray diffraction - Analysis of the stages mineralogics; Laser granulometry - size distribution of particles; and Differential thermal analysis - thermal behavior. Were performed tests of absorption of water, lineal retraction of it burns, apparent specific mass and rupture tension the flexing. The results had evidenced that the formularizations that had the A1 clay and talc on its composition were efficient for the porcelanato production remaining their technological characteristics inside of the intervals of variation desired by the Norms of the ABNT

Estudo e caracterização de matérias-primas para o desenvolvimento de blocos sílico-calcários

The types of products manufactured calcium silicate blocks are very diversified in its characteristics. They include accessory bricks, blocks, products in dense material, with or without reinforcements of hardware, great units in cellular material, and thermal insulating products. The elements calcium silicate are of great use in the prefabricated construction, being formed for dense masses and hardened by autoclaving. This work has for objective develop formulations that make possible the obtaining of calcium silicate blocks with characteristics that correspond the specifications technical, in the State of the Rio Grande of the North, in finality of obtaining technical viability for use in the civil construction. The work studied the availability raw materials from convenient for the production of calcium silicate blocks, and the effect of variations of the productive process on the developed products. The studied raw materials were: the quartz sand from the city of São Gonçalo do Amarante/RN, and two lime, a hydrated lime and a pure lime from the city of Governador Dix-Sept Rosado/RN. The raw materials collected were submitted a testes to particle size distribution, fluorescence of X rays, diffraction of X rays. Then were produced 8 formulations and made body-of-test by uniaxial pressing at 36 MPa, and cured for 7 hours at about 18 kgf/cm2 pressing and temperature of approximately 180 °C. The cure technological properties evaluated were: lineal shrinkage, apparent density, apparent porosity, water absorption, modulus of rupture flexural (3 points), resistance compression, phase analysis (XRD) and micromorphological analysis (SEM). From the results presented the technological properties, was possible say that utilization of hydrated lime becomes more viable its utilization in mass limestone silica, for manufacture of calcium silicate blocks

Estudo das variáveis de processamento das matérias-primas da região do crato - ce na fabricação de produtos cerâmicos por extrusão e por prensagem

The limits to inform is about the character stico of basic, quimica, mineralogical and mechaniques of matlaughed material used in the manufacturing process the product certified in economic region the Cariri, specifically in the city of Crato, Ceará state, motivated the development of this work, since in this region the exist ing economic context that a general appear as important in the production chains. Were made twentyfive soils-test specimen collection and the study was performed to differentiate the mat laugh materials of variaveis processing of mathing raw materials in the factory The product mica monkeys by extrusion and pressing. The results were obtained ap s as analyzes: grain size, index of plasticity, fluoresce incidence X-ray difration the X-ray, and analyzes thermicals and properties technological. through s of curves gresifica returned to was a comparison between the retro the linear, absorb to water, porosity and bulk density. the results show that the excellent distribution and character acceptable available for the processing of the structure color dark red. needing, therefore, of the mixture of a less plastic clay with thick granulation, that works as plasticity reducer. In spite of the different resignation forms for prensagem and extrusion, the characteristics of absorption of water and rupture tension the flexing was shown inside of the patterns of ABNT

Estudo do potencial de utilização do resíduo da extração de esmeraldas na fabricação de cerâmica de revestimento

Companies involved in emerald mining and treatment represent an important area of industrial development in Brazil, with significative contribution to the worldwide production of such mineral. As a result, large volumes of emerald waste are constantly generated and abandoned in the environment, negatively contributing to its preservation. By the other side the interest of the use of mining waste as additive in ceramic products has been growing from researchers in recent years. The ceramic industry is constantly seeking to the marked amplification for the sector and perfecting the quality of the products and to increase the variety of applications. The technology of obtaining of ceramic tiles that uses mining residues assists market niches little explored. In this scenario, the objective of the present study was to characterize the residue generated from emerald mining as well as to assess its potential use as raw material for the production of ceramic tiles. Ceramic mixtures were prepared from raw materials characterized by X-ray fluorescence, X-ray diffraction, particle size analysis and thermal analysis. Five compositions were prepared using emerald residue contents of 0%, 10%, 20%, 30% and 40%. Samples were uniaxially pressed, fired at 1000, 1100 and 1200ºC and characterized aiming at establishing their mineralogical composition, water absorption, apparent porosity, specific mass, linear retraction and modulus of rupture. The results shows that the emerald residue, basically consisted of 73% of (SiO2 + Al2O3) and 17,77% of (MgO + Na2O+ K2O) (that facilitates sintering), can be added to the ceramic tile materials with no detrimental effect on the properties of the sintered products

Análise das propriedades termofísicas, mecânicas e geométricas de telhas cerâmicas queimadas em forno caieira e forno abóbada

In the industry of ceramic in Rio G. do Norte, tile stands out as the most manufactured product by this industry, being the intermittent kiln abóbada and caieira the principal type of kiln used in burning. There was a need to make a study of the influence exerted by the type of kiln in which tiles are burnt in their thermo physical properties. The analysis started with 24 raw samples of tile, which was split in two groups of 12 samples and burnt in Abóbada and Caieira kiln. Besides that, it was made study of the tax of heat transfer to the environment (for each kiln). After having been burnt the samples were taken for laboratory analysis. The properties verified were impermeability, determination of dry mass, absorption of water, the load of bending rupture and its geometric characteristics, the tests were conducted following the currents standards. The tests were carried out according to the ABNT - NBR 15310. The calculation of the rate of heat transfer showed that the abóbada kiln is more efficient than the Caieira, however the results of tests on the samples revealed no superiority of one over another sample. So the furnace had no influence on the performance of the ceramic tiles

Estudo das propriedades mecânicas de biocompósitos de polipropileno reforçados com fibras naturais

This research presents an approach to the addition of curauá fibers and licuri fibers in a polypropylene resin matrix, such as an alternative proposal to reinforce the polymeric composites. Fiber content of 0 %, 5 %, 10 %, and 20% were analyzed for verification of their mechanical properties comparing them, inclusive with the properties of polypropylene. The grainulated biocomposites had been prepared in an extrusora. The test bodies had been molded by injection and submitted to the mechanical essays uniaxial traction, flexion on three points, impact, in addition to thermal tests (HDT). These biocomposites had been also subjected the essay physicist-chemistry index of fluidity (IF). It was observed that the biocomposites of PP with 20% curauá, obtained bigger increase in the modulus of elasticity and a bigger reduction in the resistance to the impact. In the mechanical behavior, for all the biocomposites, these were increases in values of the limit of drainage and tension of rupture, when tested by uniaxial traction, as they added the fibers. Another important point was the increase of the resistance the flexion. It was also noted that the addition of fibers reduced the thermal degradation of the mixture natural fibers / polypropylene.

Estudo comparativo das propriedades mecânicas em compósitos da fibra modal e poliester

In the present work, three composites with distinct reinforcements (polyester, modal e polyester + modal), all if a unsaturated orthophthalic polyester resin as matrix were used, in order to conduct a comparative study by mechanical tests and water absorption. The fibre mats were prepared in a mat preparatory by immersion developed in the Textile Engineering Laboratory. The composites were manufactured using a closed mould process by compression using an unsaturated orthophthalic polyester resin as matrix and 1% MEK (methyl ethyl ketone peroxide) as an initiator. In each composite twelve samples with the dimensions of 150x25x3 mm were cut randomly for the mechanical analysis (tension x extension, three points bending and water absorption and Scanning Electron Micsroscopy). The mechanical tests were carried out in the Laboratório de Metais e Ensaios Mecânicos UFRN . All the analyses were carried out according to the ASTM norms. The resultant samples from the mechanical analysis were subjected for the Scanning Electron Microscopy analysis. Based on the results obtained, it was observed that the reinforced composite with two fibres (modal + polyester) presented better results in comparison to the other two composites both in the tension/extension as well on the three point bending tests. In the water absorption test, it was possible to observe an equilibrium in the water absorption by the modal and polyester composite, due to the union of the two fibres. In the SEM images, the regions of rupture in the composites as well as the adsorption between the fiber and the matrix could be observed