Parâmetros urbanísticos na regulação do uso e ocupação do solo: estudo da densidade e do coeficiente de aproveitamento nos planos diretores de Natal de 1994 e 2007

A Constituição Federal de 1988 e o Estatuto da Cidade estabelecem o Plano Diretor como instrumento básico da política de ordenamento territorial, tendo como princípio fundamental o cumprimento da função social da propriedade e do direito à cidade. Na perspectiva de adequação às diretrizes e objetivos da política urbana estabelecidos em 1988, o município de Natal elaborou os Planos Diretores de 1994 e 2007, definindo instrumentos e parâmetros de regulação do uso e ocupação do solo possíveis de assegurar o cumprimento da função social da propriedade urbana e de gerar subsídios ao planejamento e à gestão da cidade. Apesar de Natal ter sido um dos municípios brasileiros pioneiros na adoção desses princ pios, antecipando e incorporando os instrumentos que em 2001 viriam a ser definidos no Estatuto da Cidade, identifica-se que alguns desses instrumentos e parâmetros direcionados à regulação do uso e ocupação do solo não tiveram sua aplicação plena, a exemplo do mecanismo de acompanhamento e controle dado pelo Estoque de Área Edificável e da Densidade, que foi substituída pelo Coeficiente de Aproveitamento no Plano Diretor de 2007. Questionando esse procedimento, busca-se na presente pesquisa investigar de que maneira essa substituição do parâmetro densidade pelo coeficiente de aproveitamento influenciou na capacidade da gestão pública de regular os processos de uso e ocupação do solo, de forma a adequar a sua intensificação ao suporte da infraestrutura instalada. Foram tomadas como referência teórico-conceitual as contribuições sobre a prática de planejamento urbano no Brasil, nos marcos do ideário da reforma urbana, com destaque para as reflexõe s de Flávio Villaça, Orlando Alves Santos Junior e Daniel Todtmann Montandon, Luiz César de Q. Ribeiro, Raquel Rolnik, Ermínia Maricato, Laura Machado de Bueno e Renato Cymbalista, José Roberto Bassul e Carlos F. Lago Burnett, e, com relação aos parâmetros de controle urbanístico, o estudo identifica as diferentes abordagens sobre a densidade urbana e o coeficiente de aproveitamento com base nas reflexões de Claudio Acioly Jr., Forbes Davidson, Juan Luis Mascaró, Ricardo Ojima, Marcelo de Souza, José Rámon Navarro Vera e Armando Ortuño Padilla, Nestor Goulart Reis, Marta Dora Grostein e Susana Ricardo Alves. Como conclusão, discute-se a hipótese formulada, inicialmente, de que a mudança de parâmetros verificada colocou limites para o município realizar uma gestão adequada do solo urbano e, portanto, de fazer cumprir a função social da propriedade, considerando a necessidade de adequação entre a intensificação do uso e ocupação do solo e a infraestrutura instalada

Construção de um aparato experimental para monitoramento in situ da deposição de filmes finos de titânio por magnetron sputtering

The technique of surface coating using magnetron sputtering is one of the most widely used in the surface engineering, for its versatility in obtaining different films as well as in the micro / nanometric thickness control. Among the various process parameters, those related to the active species of the plasma are of the most fundamental importance in the mechanism and kinetics of deposition. In order to identify the active species of the plasma, parameters such as gas flow, pressure and density of electric power were varied during titanium coating on glass substrate. By flowing argon gas of 10, 20, 30, 40 and 50 sccm (cubic centimeters per minute) for each gas flow a sequential scan of the electric current of 0.10, 0.20, 0.30, 0.40 , 0.50 A. The maximum value of 0.50 A was chosen based both on literature data and on limitations of the equipment. The monitoring of plasma species present during the deposition was carried out in situ by the technique of optical emission spectroscopy (OES) through the spectrometer Ocean Optics USB2000 Series. For this purpose, an apparatus was developed to adapt the OES inside the plasma reactor to stay positioned closest to the target. The radiations emitted by the species were detected by an optical fiber placed behind the glass substrate and their intensities as a function of wavelength were, displayed on a monitor screen. The acquisition time for each condition of the plain parameters was related to the minima of spectral lines intensities due to the film formed on the substrate. The intensities of different emission lines of argon and titanium were then analyzed as a function of time, to determine the active species and estimate the thickness of the deposited films. After the deposition, the coated glasses thin films were characterized by optical transmittance through an infrared laser. It was found that the thickness and deposition rate determined by in situ analysis were consistent with the results obtained by laser transmittance

Início da função gonadal no sagui comum (Callithrix jacchus): diferenças entre gêneros

Os primatas não humanos, como Callithrix jacchus vêm sendo utilizados com maior frequência em pesquisa biomédica e, recentemente, nosso laboratório propôs uma nova classificação para monitorar com mais detalhes as modificações comportamentais e hormonais relacionadas ao desenvolvimento. O presente trabalho monitorou os níveis de hormônios gonadais de 4 machos e 6 fêmeas de C. jacchus durante as fases juvenil I e II e subadulta (dos 5 aos 15 meses). Os resultados apontaram que os níveis de progesterona nas fêmeas e andrógenas nos machos foram estatisticamente mais elevados nos estágios juvenil II e subadulto, respectivamente, em relação ao estágio juvenil I. Estes achados indicam que, de acordo com a nova classificação, foi possível observar que o funcionamento gonadal se instala mais cedo nas fêmeas

Relações interorganizacionais e eficiência coletiva: um estudo de caso no arranjo produtivo local de confecções do agreste pernambucano

This work is a study in the Local Productive Arrangement of confections from Agreste of Pernambuco, as a relevant sector in economic and social aspect. This research has as central aim to understand how the inter-organizational relations influence the collective efficiency of arrangement. The theoretical framework employed highlights the approaches that deal with the benefits of business agglomeration for the develop­ment of firms and regions. It has discussed the approach of small and medium enter­ prises and industrial districts (SCHMITZ, 1997), which introduce the concept of col­ lective efficiency, explaining that only those externalities explained by Marshall (1996) are not sufficient to explain the competitive advantage of enterprises, expand­ing the idea that organizations achieve competitive advantage not acting alone. To examine the influences of relations in the collective efficiency, it has been taken as analytical perspective theory of social networks (GRANOVETTER, 1973, 1985; BURT, 1992; UZZI, 1997) because it has believe that this approach provides subsi­ dies for a structural analysis of social relationships in face the behavior of human ac­tion. By examining the organizations in a social network, you should understand the reason of this establishment of the relationship, their benefits, and as the information flow takes place and density of links between the actors (Powell; SMITH-DOERR, 1994). As for the methods, this study is characterized as a case study, in according to the purposed objectives, in addition to qualitative method. Also, due to recovering of the historical milestones of the arrangement, it is used a sectional approach with longitudinal perspective (VIEIRA, 2004). The primary and secondary data were used in order to understand the evolutionary process of the sector and their inter-actors re­ lationships in the arrangement for the promotion of development, for both, was used the contend and documentary analysis technique, respectively (DELLAGNELO ; SIL­VA, 2005). The approach of social networks has permitted understand that social re­lationships may extend the collective efficiency of the arrangement, and therefore need to develop policies that encourage the legalization of informal companies in ar­rangement, by showing up themselves representative. Thus, the relations estab­ lished in LPA of confections from Agreste of Pernambuco need for more effective mechanisms to broaden the collective efficiency. Therefore, this way as take place has directly benefited only a group of companies that are linked in some way the sup­portive institutions. So we can conclude that the inter-actor relations have limited the collective efficiency of LPA, being stimulated by the institutions in support only to groups of entrepreneurs, even those that produce external relations for all clustered companies

As relações da tríplice hélice no setor da carcinicultura do Rio Grande do Norte: uma análise a partir das abordagens da imersão social e da dependência de recursos

This work consists in a study of the Shrimp Industry in the state of Rio Grande do Norte, whose central issue relates to the understanding of how the Triple Helix (University, Government and the productive sector) interrelationship limits or expands the industry s innovation process. The study aims to understand how the Triple Helix relationship interferes in the innovation process of shrimp in Rio Grande do Norte. As the knowledge becomes the resource key for production methods, the generation of new technologies, new products and processes which demands joint and integrated action of the institutions comprising the Triple Helix: University, Government and productive sector, which possess the essential resources to innovate the process and can be maximized from cooperative relationships between the referred Institutions. Thus, in this work, it was sharply used the pioneering studies of Sabato and Botana (1968) regarding the cooperation relationship between the scientific-technological sphere, the governmental and the productive base, and studies on the Triple Helix approach, proposed by Etzkowitz and Leydesdorff (2000), in which the university has a key role in the process of technological and innovative development of countries and regions, and under which it is assigned to the very University - the character of the entrepreneurial institution, through the concept of entrepreneurial University. Aiming to overcome the criticism of Cooke (2005), regarding the limitations of the Triple Helix approach, in this study it was used - as analytical perspectives - the perspective of social immersion (Granovetter, 1985, 2005) and the theory of resources dependence (PFEFFER; SALANCIK, 1978). The analytical perspectives presented in here, despite of the different assumptions, are essential to eliminate the bias that one only approach can lead (ASTLEY; VAN DE VEM; 2007). The authors arguments focus on the fact that the integration is possible if the researcher acknowledged that different perspectives may have different descriptions of the same phenomenon. As a research strategy, this study is characterized as a study case, along with the proposed objectives - the qualitative method was used as an approach and, depending on the gathering of the sector s historical, a sectional longitudinal view approach was applied (VIEIRA, 2004). The primary and secondary data were used in order to understand the sector s evolutionary process and its inter-institutional relations - regarding the shrimp culture in Rio Grande do Norte - to promote the development, as the content was used for the technical analysis (BARDIN, 1977). The approach of social immersion and resources addiction dependence made it possible to understand that relationships are established within and between each sphere (university, government and productive sector) characterizing a network of low density relationships and strongly internal and external dependence. Based on the speech of Etzkowitz and Mello (2006), a successful Triple Helix strategy of innovation requires not only the involvement and commitment of the parts, within the institutional sphere and among them, but also the development of mechanisms to coordinate the multiple and complex interactions and interfaces, focusing on promoting both environment and context for innovation and learning; it can be acknowledge from study results that the shrimp in the State of the RN, although there are several institutional mechanisms to promote greater integration and technological development, has been presented disjointed - both internally and between the spheres - and under no legitimate practice when facing the innovational promotion and integration institutions. Due to those factors, the central institutions of the network are crucial to the promotion of innovations, spreading through their direct contacts the importance factor of the sustainable competitive activity in the world market and on the national level. However, it may be concluded, from the data, that the Triple Helix relations are interfering in a negative way on what concerns the promotion of innovations in the shrimp industry in RN

A forma do privilégio: renda, acessibilidade e densidade em Natal-RN

The aim of this work is to understand the morphological expression of ground occupation by the higher income population, by focusing on population distribution in accordance with income layers and demographical density, as well as topological accessibility (HILLIER and HANSON, 1984) resulting from the urban grid structure. It endeavors to identify a functional organizing principle regarding the intra-urban space of Natal capital city of the state of Rio Grande do Norte, the research focus. In order to achieve this, census data as well as syntactic data were utilized for mapping and spatial analysis of income patterns, topological accessibility and demographical density using Geographical Information System GIS. The organizing principle was named as the Form of Privilege, a pattern that concentrates or tends to concentrate wealth, topological accessibility and low demographical density. Attempting to assess its extent, beyond Natal, this principle was applied to other Brazilian northeastern capitals such as: Fortaleza, CE; Teresina, PI; Aracaju, SE; Recife, PE; and João Pessoa, PB. Findings point out that although the urban structures of these cities are not immune to the Form of Privilege, Natal is emblematic of this phenomenon, a fact that demonstrates the perverse character of its spatial process, which historically creates privileged areas within the city, by means of the appropriation of accessibility as well as of the many urban benesses that are related to it by higher income groups at the expense of the major part of the population, which though being the people mostly in need of the benefits originating from the urban form are excluded from them

Terrenos de marinha: terras públicas com função social? um estudo da orla marítima de natal

This work has as its theme the social function of terrenos de marinha. Theresearch universe is the terrenos de marinha of Natal coastline, focusing on thefulfillment of its social function. Prescribed by law since the colonial period with thepurpose of protecting the coast and free movement of people and goods, theywere swathes of land not available to private use by individuals. With the transitionfrom the allotments system to the purchase and sale, regard to land access,crystallized with the creation of the Land Law in the nineteenth century, the land isheld as merchandise and terrenos de marinha, following this logic, also acquireexchange value and become capable of enjoyment by private individuals, with thecondition of tax payments to the state. This is seen until the twentieth century,when in 1988, primarily because of the Federal Constitution promulgation, begins anew cycle when is possible to use on terrenos de marinha the principle of thesocial function of property. From this perspective this study aims to identify thesocial function of terrenos de marinha in Natal, focusing on the public destinationand the use value of the city coastline. To this end, it was made a data collection inthe on-line information system of the Federal Heritage Department of Rio Grandedo Norte (SPU / RN) and in the terrenos de marinha areas, in order to find out ifthey had public or private use, or if they were empty lots, as well as if thepopulation access to the shore exist. Interviews with managers of the SPU weremade. The empirical study showed that the social function of terrenos de marinhain the city of Natal still didn´t happen, considering the constant existence of vacantlots in their areas, the lack of access in significant portions of the coastline and thereduced areas directed to common use along the coastline, minimizing its potentialof enjoyment by the population. It concludes by pointing to the existence of a newtransition phase on the terrenos de marinha, in witch, gradually, come up lawprovisions in the legal system and public policies to expand the purely taxcollection function attributed to this land for two centuries. In this direction, thesocial function of terrenos de marinha is embodied in concomitant adjustment ofthe tax collection function and the rescue of coastline use value, national heritageand a place for sociability and social relations development

Caracterização ecológica dos peixes recifais do Atol das Rocas

The present work was carried out at the Atol das Rocas (3º 51 S; 33º 49 W), the only atoll of the South Atlantic and the first Brazilian marine protected area. It was guided by the following hypothesis: the composition of the fish communities varies in agreement with the position of the pools; in other words, with or without permanent ocean connection. To test the validity of this hypothesis, the fish abundance was estimated in the connected pools (Barretinha/Barreta Falsa) and unconnected ones (Cemiteriozinho/Âncoras), carrying an ecological characterization of the fishes that inhabit these pools. Additionally, the structural complexity of the sampled places was also evaluated intending to verify the variations of the abundance and diversity of fishes in function to this factor. By the fact of this research was being carried out through the limits of a conservation unit, the samples was realized using visual census techniques. The results generated through uni and multivariate analytic techniques allowed the evidence that decisive factor in the density, richness and diversity variations of fishes are linked to the substratum type (Hard / Soft bottom) and not by the fact that the pool are or are not connected permanently to the ocean. In relation to the structural complexity; 58% of the variations in the diversity of fishes were attributed to changes in the structural complexity, while 12% of the variations in the abundance were attributed to the structural complexity

Efeito da salinidade da água do mar no rendimento, composição e atividades biológicas de frações polissacarídicas da Chlorophyta Caulerpa cupressoides var. flabellata

Seaweeds sulfated polysaccharides have been described as having various pharmacological activities. However, nothing is known about the influence of salinity on the structure of sulfated polysaccharides from green seaweed and pharmacological activities they perform. Therefore, the main aim of this study was to evaluate the effect of salinity of seawater on yield and composition of polysaccharides-rich fractions from green seaweed Caulerpa cupressoides var. flabellata, collected in two different salinities beaches of the coast of Rio Grande do Norte, and to verify the influence of salinity on their biological activities. We extracted four sulfated polysaccharides-rich fractions from C. cupressoides collected in Camapum beach (denominated CCM F0.3; F0.5; F1.0; F2.0), which the seawater has higher salinity, and Buzios beach (denominated CCB F0.3; F0.5; F1.0; F2.0). Different from that observed for other seaweeds, the proximate composition of C. cupressoides did not change with increased salinity. Moreover, interestingly, the C. cupresoides have high amounts of protein, greater even than other edible seaweeds. There was no significant difference (p>0.05) between the yield of polysaccharide fractions of CCM and its CCB counterparts, which indicates that salinity does not interfere with the yield of polysaccharide fractions. However, there was a significant difference in the sulfate/sugar ratio of F0.3 (p<0.05) and F0.5 (p<0.01) (CCM F0.3 and CCB F0.5 was higher than those determined for their counterparts), while the sulfate/sugar ratio the F1.0 and F2.0 did not change significantly (p>0.05) with salinity. This result suggested that the observed difference in the sulfate/sugar ratio between the fractions from CCM and CCB, is not merely a function of salinity, but probably also is related to the biological function of these biopolymers in seaweed. In addition, the salinity variation between collection sites did not influence algal monosaccharide composition, eletrophoretic mobility or the infrared spectrum of polysaccharides, demonstrating that the salinity does not change the composition of sulfated polysaccharides of C. cupressoides. There were differences in antioxidant and anticoagulant fractions between CCM and CCB. CCB F0.3 (more sulfated) had higher total antioxidant capacity that CCM F0.3, since the chelating ability the CCM F0.5 was more potent than CCB F0.5 (more sulfated). These data indicate that the activities of sulfated polysaccharides from CCM and CCB depend on the spatial patterns of sulfate groups and that it is unlikely to be merely a charge density effect. C. cupressoides polysaccharides also exhibited anticoagulant activity in the intrinsic (aPTT test) and extrinsic pathway (PT test). CCB F1.0 and CCM F1.0 showed different (p<0,001) aPTT activity, although F0.3 and F0.5 showed no difference (p>0,05) between CCM and CCB, corroborating the fact that the sulfate/sugar ratio is not a determining factor for biological activity, but rather for sulfate distribution along the sugar chain. Moreover, F0.3 and F0.5 activity in aPTT test was similar to that of clexane®, anticoagulant drug. In addition, F0.5 showed PT activity. These results suggest that salinity may have created subtle differences in the structure of sulfated polysaccharides, such as the distribution of sulfate groups, which would cause differences in biological activities between the fractions of the CCM and the CCB

Análise da contribuição de fatores genéticos e ambientais na manutenção da hanseniase nos estados do Rio Grande do Norte e Pará

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Adição de superplastificante e anti-segregante à base de CMC em pastas de cimento para Poços de Petróleo

Oil well cementing materials consist of slurries of Special class Portland cement dispersed in water. Admixtures can be used to provide the necessary fluidity, so the material can be efficiently pumped down as well as penetrate porous rocks with controlled filter loss. Construction admixtures can be used to modify the properties of oil well cements provided they can withstand and hold their properties at the higher than ambient temperatures usually encountered in oil fields. In civil construction, superplasticizer play the role of dispersants that reduce the facto r of water cement improve mechanical properties and fluidity of the cement, whereas anti-segregation agents improve the workability of the slurry. In the present study, oil well cement slurries were produced adding both a dispersant and an anti-segregation agent conventionally used in Portland CPII-Z-32 RS cement aiming at materials for primary cementing and squeeze operations. Three basic aspects were evaluated: fluidity, filter loss and the synergetic effect of the admixtures at two temperatures, i.e., 27°C and 56°C, following API RP 10B practical recommendations. The slurries were prepared using admixture concentrations varying from 2.60 Kgf/m3 (0.02 gallft3) to 5.82 Kgf/m3 (0.045 galJft3) BWOC. The density of the slurries was set to 1.89 g/cm3 (15.8 Ib/gal). 0.30 to 0.60% BWOC of a CMC-based anti-segregation agent was added to the cement to control the filter loss. The results showed that the addition of anti-segregation at concentrations above 0.55% by weight of cement resulted in the increased viscosity of the folders in temperatures evaluated. The increasing the temperature of the tests led to a reduction in the performance of anti-segregation. At concentrations of 5.20 kgf/m3 (0,040 gallft3) and 5.82 Kgf/m3 (0,045 gal/ft 3) observed a better performance of the properties evaluated in the proposed system. At low temperature was observed instability in the readings of rheology for all concentrations of anti-segregation. Contents that increasing the concentration of anti¬-segregation is limited concentrations greater than 0.55 % BWOC of the CMC in temperature analyzed. The use of the system with CMC promoted a good performance against the properties evaluated. The principal function of anti¬-segregation was optimized with increasing concentration of superplasticizer, at temperatures above the 2rC. The study of the behaviour of systemic additives, resulting in slurries of cement, which can be optimized face studies of other intrinsic properties in oil fields

Análise por meio de espectroscopia de emissão óptica das espécies ativas em nitretação iônica e gaiola catódica

Plasma process like ionic nitriding and cathodic cage plasma nitriding are utilized in order to become hard surface of steels. The ionic nitriding is already accepted in the industry while cathodic cage plasma nitriding process is in industrial implementation stage. Those process depend of plasma parameters like electronic and ionic temperature (Te, Ti), species density (ne, ni) and of distribution function of these species. In the present work, the plasma used to those two processes has been observed through Optical Emission Spectroscopy OES technique in order to identify presents species in the treatment ambient and relatively quantify them. So plasma of typical mixtures like N2 H2 has been monitored through in order to study evolution of those species during the process. Moreover, it has been realized a systematic study about leaks, also thought OES, that accomplish the evolution of contaminant species arising because there is flux of atmosphere to inside nitriding chamber and in what conditions the species are sufficiently reduced. Finally, to describe the physic mechanism that acts on both coating techniques ionic nitriding and cathodic cage plasma nitriding

Adição de vermiculita expandida mícron em pastas de baixa densidade para cimentação de poços de petróleo

The northeastern region of Brazil has a large number of wells producing oil using a method of secondary recovery steam injection, since the oil produced in this region is essentially viscous. This recovery method puts the cement / coating on thermal cycling, due to the difference in coefficient of thermal expansion between cement and metal coating causes the appearance of cracks at this interface, allowing the passage of the annular fluid, which is associated with serious risk socioeconomic and environmental. In view of these cracks, a correction operation is required, resulting in more costs and temporary halt of production of the well. Alternatively, the oil industry has developed technology for adding new materials in cement pastes, oil well, providing high ductility and low density in order to withstand the thermo-mechanical loads generated by the injection of water vapor. In this context, vermiculite, a clay mineral found in abundance in Brazil has been applied in its expanded form in the construction industry for the manufacture of lightweight concrete with excellent insulation and noise due to its high melting point and the presence of air in their layers lamellar. Therefore, the vermiculite is used for the purpose of providing low-density cement paste and withstand high temperatures caused by steam injection. Thus, the present study compared the default folder containing cement and water with the folders with 6%, 8% and 10% vermiculite micron conducting tests of free water, rheology and compressive strength where it obtained the concentration of 8 % with the best results. Subsequently, the selected concentration, was compared with the results recommended by the API standard tests of filtered and stability. And finally, analyzed the results from tests of specific gravity and time of thickening. Before the study we were able to make a folder with a low density that can be used in cementing oil well in order to withstand the thermo-mechanical loads generated by steam injection

Desenvolvimento de tubulação em compósito polimérico revestida externamente com poliuretano de alta densidade

Pipelines for the transport of crude oil from the production wells to the collecting stations are named production lines . These pipes are subjected to chemical and electrochemical corrosion according to the environment and the type of petroleum transported. Some of these lines, depending upon the composition of the fluid produced, may leak within less than one year of operation due to internal corrosion. This work aims at the development of composite pipes with an external protecting layer of high density polyurethane for use in production lines of onshore oil wells, meeting operational requirements. The pipes were manufactured using glass fibers, epoxy resin, polyester resin, quartz sand and high density polyurethane. The pipes were produced by filament winding with the deposition of high density polyurethane on the external surface and threaded ends (API 15 HR/PM-VII). Three types of pipes were manufactured: glass/epoxy, glass/epoxy with an external polyurethane layer and glass/epoxy with an intermediate layer of glass fiber, polyester, sand and with an external polyurethane layer. The three samples were characterized by Scanning Electronic Microscopy (SEM) and for the determination of constituent content. In addition, the following tests were conducted: hydrostatic test, instant rupture, shorttime failure pressure, Gardner impact, transverse stiffness and axial tension. Field tests were conducted in Mossoró RN (BRAZIL), where 1,677 meters of piping were used. The tests results of the three types of pipes were compared in two events: after two months from manufacturing of the samples and after nine months of field application. The results indicate that the glass/epoxy pipes with an intermediate layer of fiber glass composite, polyester e sand and with an external layer of high density polyurethane showed superior properties as compared to the other two and met the requirements of pressure class, axial tensile strength, transverse stiffness, impact and environmental conditions, for onshore applications as production lines

Caracterização de compósitos Nb-20%cu obtidos por moagem de alta energia e sinterizados por fase líquida

In this work, was studied the formation of a composite of the refractory metal niobium with copper, through the process of high-energy milling and liquid phase sintering. The HEM can be used to synthesize composite powders with high homogeneity and fine size particle distribution. It may also produce the solid solubility in immiscible systems such as Nb-Cu, or extend the solubility of systems with limited solubility. Therefore, in the immiscible system Cu-Nb, the high-energy milling was successfully used to obtain the composite powder particles. Initially, the formation of composite particles during the HEM and the effect of preparation technique on the microstructure of the material was evaluated. Four loads of Nb and Cu powders containing 20%wt Cu were synthesized by MAE in a planetary type ball mill under different periods of grinding. The influence of grinding time on the metal particles is evaluated during the process by the withdrawal of samples at intermediate times of milling. After compaction under different forces, the samples were sintered in a vacuum furnace. The liquid phase sintering of these samples prepared by HEM produced a homogeneous and fine grained. The composite particles forming the sintered samples are the addition of a hard phase (Nb) with a high melting point, and a ductile phase (Cu) with low melting point and high thermal and electrical conductivities. Based on these properties, the Nb-Cu system is a potential material for many applications, such as electrical contacts, welding electrodes, coils for generating high magnetic fields, heat sinks and microwave absorbers, which are coupled to electronic devices. The characterization techniques used in this study, were laser granulometry, used to evaluate the homogeneity and particle size, and the X-ray diffraction, in the phase identification and to analyze the crystalline structure of the powders during milling. The morphology and dispersion of the phases in the composite powder particles, as well the microstructures of the sintered samples, were observed by scanning electron microscopy (SEM). Subsequently, the sintered samples are evaluated for density and densification. And finally, they were characterized by techniques of measuring the electrical conductivity and microhardness, whose properties are analyzed as a function of the parameters for obtaining the composite