Caracterização de compósitos Nb-20%cu obtidos por moagem de alta energia e sinterizados por fase líquida

In this work, was studied the formation of a composite of the refractory metal niobium with copper, through the process of high-energy milling and liquid phase sintering. The HEM can be used to synthesize composite powders with high homogeneity and fine size particle distribution. It may also produce the solid solubility in immiscible systems such as Nb-Cu, or extend the solubility of systems with limited solubility. Therefore, in the immiscible system Cu-Nb, the high-energy milling was successfully used to obtain the composite powder particles. Initially, the formation of composite particles during the HEM and the effect of preparation technique on the microstructure of the material was evaluated. Four loads of Nb and Cu powders containing 20%wt Cu were synthesized by MAE in a planetary type ball mill under different periods of grinding. The influence of grinding time on the metal particles is evaluated during the process by the withdrawal of samples at intermediate times of milling. After compaction under different forces, the samples were sintered in a vacuum furnace. The liquid phase sintering of these samples prepared by HEM produced a homogeneous and fine grained. The composite particles forming the sintered samples are the addition of a hard phase (Nb) with a high melting point, and a ductile phase (Cu) with low melting point and high thermal and electrical conductivities. Based on these properties, the Nb-Cu system is a potential material for many applications, such as electrical contacts, welding electrodes, coils for generating high magnetic fields, heat sinks and microwave absorbers, which are coupled to electronic devices. The characterization techniques used in this study, were laser granulometry, used to evaluate the homogeneity and particle size, and the X-ray diffraction, in the phase identification and to analyze the crystalline structure of the powders during milling. The morphology and dispersion of the phases in the composite powder particles, as well the microstructures of the sintered samples, were observed by scanning electron microscopy (SEM). Subsequently, the sintered samples are evaluated for density and densification. And finally, they were characterized by techniques of measuring the electrical conductivity and microhardness, whose properties are analyzed as a function of the parameters for obtaining the composite

Influência da adição de cálcio nas propriedades de pastas geopoliméricas destinadas a cimentação de poços de petróleo

Nowadays, the search for new technologies that are able to follow the upcoming challenges in oil industry is a constant. Always trying properties improvements of the used materials, looking for the best performance and greater life time. Besides the search for technologies that show an improvement of performance, the search for materials environmentally correct along the whole production process. In Oil well cementing, this search for new technologies passes through the development of slurry systems that support these requests and that are also environmentally friendly. In this context, the use of geopolymer slurries is a great alternative route to cementing oil wells. Besides having good properties, comparable to Portland cement slurries, this alternative material releases much less CO2 gas in the production of their root materials when compared the production of Portland cement, which releases tons of CO2. In order to improve the properties of geopolymer slurries has been added Calcium Oxide, as observed in other studies that slurries where the Calcium is present the values of compressive strength is greater. The addition has been realized based in the CaO/SiO2 molar ratio of 0.05, 0.10 and 0.15. Have been performed compressive strength tests, thickening time, rheology and fliud loss control test of the slurries, following NBR 9831, as well as the physical chemical characterization of XRD, SEM and TG. Has been observed in most of the tests the slurries follow a tendency until the ratio of 0.10, which inverses in the ratio 0.15. This behavior can be explained by two phenomena that occur simultaneously, the first one is the break of the polymer chains and a consequent increase in molucules mobility, which prevails until the ratio of 0.1, and the second is possible approach of the chains due to the capacity of the calcium ions stabilize the charges of two different aluminum. There is only one linearity in the mechanical behavior that can be attributed to the appereance of the C-S-H phase. Based on this, it is concluded that the phenomenon of breaking the polymer chains predominates until the ratio of 0.1, causing an increase of the filtrate volume, lower rheological parameters and increasing thickening time. From the ratio of 0.15 the approach of the chains predominates, and the behavior is reversed

Processamento e caracterização de compósitos Poli(METACRILATO DE METILA)/Sílica (PMMA/SiO2)

Currently the search for new materials with properties suitable for specific applications has increased the number of researches that aim to address market needs. The poly (methyl methacrylate) (PMMA) is one of the most important polymers of the family of polyacrylates and polymethacrylates, especially for its unique optical properties and weathering resistance, and exceptional hardness and gloss. The development of polymer composites by the addition of inorganic fillers to the PMMA matrix increases the potential use of this polymer in various fields of application. The most commonly used inorganic fillers are particles of silica (SiO2), modified clays, graphite and carbon nanotubes. The main objective of this work is the development of PMMA/SiO2 composites at different concentrations of SiO2, for new applications as engineering plastics. The composites were produced by extrusion of tubular film, and obtained via solution for application to commercial PMMA plates, and also by injection molding, for improved the abrasion and scratch resistance of PMMA without compromising transparency. The effects of the addition of silica particles in the polymer matrix properties were evaluated by the maximum tensile strength, hardness, abrasion and scratch resistance, in addition to preliminary characterization by torque rheometry and melt flow rate. The results indicated that it is possible to use silica particles in a PMMA matrix, and a higher silica concentration produced an increase of the abrasion and scratch resistance, hardness, and reduced tensile strength

Compósitos poliméricos a base de fibras de licuri: efeitos da hibridização e do envelhecimento ambiental acelerado

The gradual replacement of conventional materials by the ones called composite materials is becoming a concern about the response of these composites against adverse environmental conditions, such as ultraviolet radiation, high temperature and moist. Also the search for new composite using natural fibers or a blend of it with synthetic fibers as reinforcement has been studied. In this sense, this research begins with a thorough study of microstructural characterization of licuri fiber, as a proposal of alternative reinforcement to polymeric composites. Thus, a study about the development of two composite laminates was done. The first one, involving only the fiber of licuri and the second comprising a hybrid composite based of fiber glass E and the fiber of licuri, in order to know the performance of the fiber when of fiber across the hybridization process. The laminates were made in the form of plates using the tereftálica ortho-polyester resin as matrix. The composite laminate made only by licuri fiber had two reinforcing fabric layers of unidirectional licuri and the hybrid composite had two reinforcing layers of unidirectional licuri fabric and three layers of fiber short glass-E mat. Finally, both laminates was exposed to aging acceleration in order to study the influence of environmental degradation involving the mechanical properties and fracture characteristics thereof. Regarding the mechanical properties of composites, these were determined through uniaxial tensile tests, uniaxial compression and three bending points for both laminates in original state, and uniaxial tensile tests and three bending points after accelerated aging. As regards the study of structural degradation due to aging of the laminates, it was carried out based on microscopic analysis and microstructure, as well as measuring weight loss. The characteristics of the fracture was performed by macroscopic and microscopic (optical and SEM) analysis. In general, the laminated composites based on fiber licuri showed some advantages in their responses to environmental aging. These advantages are observed in the behavior related to stiffness as well as the microstructural degradation and photo-oxidation processes. However, the structural integrity of this laminate was more affected in case the action of uniaxial tensile loads, where it was noted a lower rate of withholding his last resistance property

Biocompósitos poliméricos obtidos a partir da fração lignocelulósica e amilácea do caroço de manga (mangifera indica), Tommy atkins

This employment has the function the utilization of mango seeds Tommy Atkins, like starch source to obtain biopolymers and fibers source and nanowhiskers cellulose also, that will be use like reinforcing fillers in micro and nanobiocomposites polymeric. The fibers in natura removed from tegument mango seed were characterized, as weel as the treated fibers and nanowhiskers of cellulose extracted from them. The starch extracted from seed s almond showed a good performance (32%) and a high purity. The chemicals analyzes, of crystallinity and morphological of the fibers in natura, treated fibers and nanowhiskers of cellulose confirmed the efficacy of the chemical treatement performed to remove amorphous constituents (hemicellulose and lignina). The thermoplastic starch (TPS) obtained from two sources, corn starch and starchy material mango, was produced in a twin screw extruder with compositon mass of 62,5% of starch, 9,4% of water and 28,1% of glycerol. The starch material mango was the main objective of this work for the production of biodegradable materials, and the starch corn was utilized during the production stage to evaluate the processability of the starch and use as parameter for comparison, according of being a conventional source for obtaining conventional comercial starch. The incorporation of fibers (6% in mass) and nanowhiskers cellulose (1% in mass) in matrix of TPS to obtain composite and nanocomposite, respectively, it was performed in single screw extruder. The biocomposites and bionanocomposites polymeric were obtained and the TPS from starchy material mango presented better results of thermal and mechanicals properties when compared to TPS corn starch. Concludes that the sediment generated of the agroindustrial processing mango used presents potencial to producing of biodegradables materials

Pirólise de borras oleosas de petroleo utilizando nanomateriais

The oily sludge is a complex mix of hydrocarbons, organic impurities, inorganic and water. One of the major problems currently found in petroleum industry is management (packaging, storage, transport and fate) of waste. The nanomaterials (catalysts) mesoporous and microporous are considered promising for refining and adsorbents process for environment protection. The aim of this work was to study the oily sludge from primary processing (raw and treated) and vacuum residue, with application of thermal analyses technique (pyrolysis), thermal and catalytic pyrolysis with nanomaterials, aiming at production petroleum derived. The sludge and vacuum residue were analyzed using a soxhlet extraction system, elemental analysis, thin layer chromatography, thermogravimetry and pyrolysis coupled in gas chromatography/mass spectrometry (Py GC MS). The catalysts AlMCM-41, AlSBA-15.1 e AlSBA-15.2 were synthesized with molar ratio silicon aluminum of 50 (Si/Al = 50), using tetraethylorthosilicante as source of silicon and pseudobuhemita (AlOOH) as source of aluminum. The analyzes of the catalysts indicate that materials showed hexagonal structure and surface area (783,6 m2/g for AlMCM-41, 600 m2/g for AlSBA-15.1, 377 m2/g for AlSBA-15.2). The extracted oily sludge showed a range 65 to 95% for organic components (oil), 5 to 35% for inorganic components (salts and oxides) and compositions different of derivatives. The AlSBA-15 catalysts showed better performance in analyzes for production petroleum derived, 20% increase in production of kerosene and light gas oil. The energy potential of sludge was high and it can be used as fuel in other cargo processed in refinery

Modelagem molecular na caracterização eletrônica de oligopeptídeos e na descrição quântica da interação fármaco-receptor

In this dissertation, the theoretical principles governing the molecular modeling were applied for electronic characterization of oligopeptide α3 and its variants (5Q, 7Q)-α3, as well as in the quantum description of the interaction of the aminoglycoside hygromycin B and the 30S subunit of bacterial ribosome. In the first study, the linear and neutral dipeptides which make up the mentioned oligopeptides were modeled and then optimized for a structure of lower potential energy and appropriate dihedral angles. In this case, three subsequent geometric optimization processes, based on classical Newtonian theory, the semi-empirical and density functional theory (DFT), explore the energy landscape of each dipeptide during the search of ideal minimum energy structures. Finally, great conformers were described about its electrostatic potential, ionization energy (amino acids), and frontier molecular orbitals and hopping term. From the hopping terms described in this study, it was possible in subsequent studies to characterize the charge transport propertie of these peptides models. It envisioned a new biosensor technology capable of diagnosing amyloid diseases, related to an accumulation of misshapen proteins, based on the conductivity displayed by proteins of the patient. In a second step of this dissertation, a study carried out by quantum molecular modeling of the interaction energy of an antibiotic ribosomal aminoglicosídico on your receiver. It is known that the hygromycin B (hygB) is an aminoglycoside antibiotic that affects ribosomal translocation by direct interaction with the small subunit of the bacterial ribosome (30S), specifically with nucleotides in helix 44 of the 16S ribosomal RNA (16S rRNA). Due to strong electrostatic character of this connection, it was proposed an energetic investigation of the binding mechanism of this complex using different values of dielectric constants (ε = 0, 4, 10, 20 and 40), which have been widely used to study the electrostatic properties of biomolecules. For this, increasing radii centered on the hygB centroid were measured from the 30S-hygB crystal structure (1HNZ.pdb), and only the individual interaction energy of each enclosed nucleotide was determined for quantum calculations using molecular fractionation with conjugate caps (MFCC) strategy. It was noticed that the dielectric constants underestimated the energies of individual interactions, allowing the convergence state is achieved quickly. But only for ε = 40, the total binding energy of drug-receptor interaction is stabilized at r = 18A, which provided an appropriate binding pocket because it encompassed the main residues that interact more strongly with the hygB - C1403, C1404, G1405, A1493, G1494, U1495, U1498 and C1496. Thus, the dielectric constant ≈ 40 is ideal for the treatment of systems with many electrical charges. By comparing the individual binding energies of 16S rRNA nucleotides with the experimental tests that determine the minimum inhibitory concentration (MIC) of hygB, it is believed that those residues with high binding values generated bacterial resistance to the drug when mutated. With the same reasoning, since those with low interaction energy do not influence effectively the affinity of the hygB in its binding site, there is no loss of effectiveness if they were replaced.

Modelos matemáticos para estimativa do consumo máximo de oxigênio pela ventilometria de esforço em indivíduos saudáveis

The relation between metabolic demand and maximal oxygen consumption during exercise have been investigated in different areas of knowledge. In the health field, the determination of maximal oxygen consumption (VO2max) is considered a method to classify the level of physical fitness or the risk of cardiocirculatory diseases. The accuracy to obtain data provides a better evaluation of functional responses and allows a reduction in the error margin at the moment of risk classification, as well as, at the moment of determination of aerobic exercise work load. In Brasil, the use of respirometry associated to ergometric test became an opition in the cardiorespiratory evaluation. This equipment allows predictions concerning the oxyredutase process, making it possible to identify physiological responses to physical effort as the respiratory threshold. This thesis focused in the development of mathematical models developed by multiple regression validated by the stepwise method, aiming to predict the VO2max based on respiratory responses to physical effort. The sample was composed of a ramdom sample of 181 healthy individuals, men and women, that were randomized to two groups: regression group and cross validation group (GV). The voluntiars were submitted to a incremental treadmill test; objetiving to determinate of the second respiratory threshold (LVII) and the Peak VO2max. Using the método forward addition method 11 models of VO2max prediction in trendmill were developded. No significative differences were found between the VO2max meansured and the predicted by models when they were compared using ANOVA One-Way and the Post Hoc test of Turkey. We concluded that the developed mathematical models allow a prediction of the VO2max of healthy young individuals based on the LVII

Papel da localização da carga em determinação dos parâmetros do canal iônico

To aureus α-HL channel, we used the cysteine-scanning mutagenesis technique. Twenty-four mutants were produced from the substitution of a single aminoacid of the primary structure of the α-HL pro this yzed after the incorporation of a mutant channel in planar lipid bilayer membranes. The modified proteins were studied in the absence and presence of watersoluble specific sulphydryl-specific reagents, in order to introduce a strong positive or negative harge at positions of substitution. The introduction of a negative charge in the stem region onverted the selectivity of the channel from weak anionic to more cationic. However, the troduction of a positive charge increased its selectivity to the anion. The degree of these alterations was inversely dependent on the channel radius at the position of the introduced harge (selectivity). As to the asymmetry of the conductance-voltage, the influence of the harge was more complex. The introduction of the negative charge in the stem region (the trans art of the pore) provoked a decrease. The intensity of these alterations depended on the radius, and on the type of free charge at the pore entrance. These results suggest that the free charge at surrounds the pore wall is responsible for the cation-anion selectivity of the channel. The istribution of the charges between the entrances is crucial for determining the asymmetry of e conductance-voltage curves. We hope that these results serve as a model for studies with other nanometric channels, in biological or planar lipid bilayer membranes or in iotechnological applications

Influência do ácido α-lipóico na adaptação antioxidante ao exercício físico em ratas wistar hígidas e ovariectomizadas

Introdução: Os hormônios estrogênicos possuem importante papel na defesa contra as espécies reativas do oxigênio, fato que se evidencia na maior incidência de doenças cardiovasculares e neurodegenerativas após a menopausa. O exercício físico melhora as defesas antioxidantes, contudo em altas cargas e em baixas concentrações de estrógeno possui efeito aditivo ao dano oxidativo. O ácido α-lipóico possui uma ampla gama de ação antioxidante e poderia contribuir para diminuição do dano nestas condições. Objetivo: O objetivo deste estudo é caracterizar a ação do ácido α-lipóico sobre a adaptação antioxidante e funções reprodutivas de ratas submetidas a natação moderada. Material e métodos: Os animais foram submetidos a natação diária (1 hora) e sacrificados após 30, 60 e 90 dias. Os animais foram divididos em controles sedentários e exercitados; suplementados (ácido α-lipóico 100mg/Kg/dia) sedentários e exercitados e animais ovariectomizados e suplementados com ácido lipóico. Avaliou-se diariamente o ciclo estral e os seguintes marcadores de estresse oxidativos foram mensurados em fígado e sangue: atividade enzimática da SOD, GPx e CAT, além do SRAT e GSH. Resultados: O protocolo de exercício aumentou a duração do ciclo estral no grupo controle exercitado, sobretudo na fase diestral. Neste mesmo grupo, houve diminuição da lipoperoxidação com melhora da atividade antioxidante da SOD e GPx. O grupo exercitado e suplementado não apresentou alteração na duração do ciclo estral e manteve os benefícios sobre o sistema antioxidante antes observado nos animais exercitados. A suplementação antioxidante juntamente com a natação em períodos superiores a 30 dias, diminuiu o processo de adaptação antioxidante quando comparado aos animais somente exercitados. Nos animais ovariectomizados, o exercício e a suplementação com ácido lipóico não promoveu adaptação antioxidante ao contrário dos demais grupos. Conclusão: O aumento na duração do ciclo estral e a melhora nos marcadores de estresse oxidativo seriam uma resposta adaptativa frente ao exercício moderado. O ácido lipóico impediu a alteração no ciclo induzida pelo exercício, mas preservou a melhoria no sistema antioxidante. A depleção estrogênica provocada pela ovariectomia eleva o potencial de dano oxidativo gerado pelo exercício. A ação antioxidante do LA na presença de estrógeno diminuiu excessivamente o dano oxidativo, comprometendo a adaptação antioxidante a natação. Nos animais ovariectomizados, contudo, o AL promoveu adaptação antioxidante ao exercício

Um modelo analítico da qualidade da dieta de adolescentes estudantes da rede publica de ensino de Natal, Brasil

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Prevalência e fatores associados à dor em professores de educação física em academias de ginástica da cidade do Salvador-BA

Physical Education professionals are usually exposed to excessive physical workloads that evolve into painful symptomatology and muscle and bone disorders that originate from the work-related exercises. Purposo: The goal of this study was to investigate the prevalence and factors associated with pain painful symptomatology in teachers in gymnastics academies. An analytical transversal cut study was performed involving 163 gymnastics teachers working in the main gyms in the city of Salvador-BA. For evaluation of pain, validated versions in Portuguese of the McGill Protocol and the Wisconsin Pain Inventory were used. For obtain results of descriptive statistical analysis of the collected data was performed, followed by TStudent, and Pearson and Spearman correlation tests to verify possible correlations between the presence of pain and other variables which were considered independent. Finally, for the identification of potential risk factors associated with pain, a binary logistic regression analysis was performed. For all statistical analysis, we cnsidered p< 0.05. Results: The painful symptoms was reported by 88.3% of the subjects surveyed. High pain levels were observed in 63.8% of the interviewed professionals, where the intensity varied from moderate to severe. Pain in the lumbar region was present in 55.2% of subjects. Positive correlations were found between the level of pain intensity and the variables related with the workload activity and daily life of the teachers in almost all body joints analyzed. Some factors had been verified associates to the painful sintomatologia as the age of the professionals, the daily hours load of labor work, and the lack of interval of rest between the lessons. Conclusions: We found a high prevalence in gym teachers working in the city of Salvador-BA, which interfered in various daily activities of their home and professional lives. The most affected region was the lumbar region, followed by the knees, neck, shoulders, ankles, hands, hips, feet, elbows and forearms. The factors associated with development of painful symptomatology were the age of the professionals, daily hours of work and the lack of rest intervals between lessons. The high prevalence of pain in Physical Education teachers can be regarded as a serious occupational health problem, which would demand the urgent deployment of preventive intervention programs to minimize the impact of pain among these professionals

Biologia populacional comparada de duas espécies de heliconius (Lepidoptera: Nymphalidae) em um ambiente sazonal de floresta atlântica do nordeste brasileiro

Tropical environments often face strong seasonal variations in climate, such as alternate periods of dry and rain, that may often be important influence in the annual X the organisms lives. Here we assess how population dynamics of two butterfly species (Heliconius erato and Heliconius mepomene) respond to environmental and seasonal variations. A mark-release-recapture study carried out in an Atlantic forest reserve, 15 Km from Natal, Rio Grande do Norte, Brazil, for 3 years, during the dry and rainy season, with three visits weekly done. Information such as species, wing lenght, site of capture, pollen load and phenotype (number of spots) (in H. erato only) were noted for each capture. Seasonal variation exists in capture rates of the two species, with great capture rates during the rainy season. Despite finding differences in the mean density of individuals of the two species among the different collection areas, this difference was only significant between floodplain and central areas, and no influence of seasonality was observed in the mean density between the areas. Seasonality in wing size was only observed for H. erato, with larger wings during the rainy season. Females carried larger pollen loads than males both species, but species were similar. Only males differed seasonally, with larger pollen loads during the rainy season. The distribution of the number of wing spots did not vary between the dry and rainy seasons, and the number of spots in males and females was similar. Therefore, we conclude that there was a strong influence of seasonal variation in the population dynamic of the two Heliconius species, as well as in several aspects of their biology

Ectoparasitos associados a aves de um fragmento de Floresta Estacional Decidual no Rio Grande do Norte, Brasil

This study to aimed investigate the community of ectoparasites associated with birds in the Mata do Olho D água, in the municipality of Macaíba, Rio Grande do Norte (RN), Brazil, its structure and the ambiental and hosts influential variables on it, and to verify microhabitats preferences by species of chewing lice and feather mites. We examined 172 individuals belonging to 38 species of Passeriformes and non-Passeriformes. 12 new geographic records are reported and 11 host-parasite associations not yet known for chewing lice and feather mites species. Significant relationship was found between the abundance of chewing lice and the variables total length (r = 0.29, p <0.05) and exposed culmen (r = 0.38, p <0.05) of the hosts. A principal component (PC1) accounted for 90.1% of the hosts morphological variation was significantly influential on the abundance of chewing lice (p <0.05), indicating that the morphological characteristics of the hosts may be positively influencing the abundance of these ectoparasites. Significantly higher frequency of individuals with high loads of chewing lice was detected during the dry period (x ² = 8.5, p <0.05), corroborating studies that propose that birds of arid environments suffer as much pressure as those of parasitic humid environments. Analyses of null models of co-occurrence and niche overlap showed a high degree of structure in the feather mites and chewing lice assemblies, when compared with other groups, and preferences in the use of microhabitats by taxa identified. These results corroborate ecological theories in host-parasite systems, contribute to the knowledge of ectoparasites associated with neotropical birds, and the need for experimental studies, as well as further deepening the biology of these arthropods

Avaliação do desempenho de uma cortina de estacas espaçadas, atirantada, em areia

It is presented the analysis of a retaining wall designed for the basement of a residential building, located in Natal/RN, which consists in a spaced pile wall, anchored by tiebacks, in sand. This structure was instrumented in order to measure the wall s horizontal movements and the load distribution throughout the anchor fixed length. The horizontal movements were measured with an inclinometer, and the loads in the anchors were measured with strain gages, installed in three places throughout the anchor fixed length. Measurements for displacement were done right after the implementation of each stage of the building and right after the conclusion of the building, and the measurements for loads in the anchors were done during the performance test, at the moment of the locking off and, also, right after the conclusion of the building. From the data of displacement were obtained velocity and acceleration data of wall. It was found that the time elapsed on braced installation was decisive in the magnitude of the displacements. The maximum horizontal displacement of wall ranged between 0,18 and 0,66% of the final depth of excavation. The loads in the anchors strongly reduced to approximately half the anchor fixed length, followed an exponential distribution. Furthermore, it was found that there was a loss of load in the anchors over time, reaching 50% loss in one of them