A moralidade e a vida pregressa do candidato como condição autônoma de elegibilidade

The objective of this work was about fixing the free will paradigm as negative evaluation of political rights which presents a new classification dde such rights, producing species: a) conditions of eligibility autonomous (free will), b) eligibility requirements heteronomous (will third party) and c) ineligibility (court decisions / administrative). This morality and life history as a condition of eligibility unattended, making a hermeneutic analysis of art. 14, § 9 of the Constitution, considering the justification of the views of the voting Minister Carlos Ayres Brito Appeal in Ordinary No 1069/2006 of the Supreme Electoral Tribunal (where Eurico Miranda). Are fixed concepts of morality and life history from the perspective of the moral act freely and consciously. Has resulted in the identification of the moral virtues of honesty and integrity, which are voluntary acts as a reference to morality and integrity respectively. Justifies the morality and life history as a condition of eligibility unattended. who depend exclusively on the willingness of the candidate. It is noteworthy that the conditions for eligibility as a factual finding does not violate the law and does not allow punitive sanctions or setting a deadline in case of refusal to register the application. Attributed to political parties to take responsibility in their statutes moral criteria for the nomination convention in pre candidates, giving an ethical dimension. Analyzes the law under the Clean Record of morality and life history of the candidate and the possible impact on the electoral context.

O piso salarial nacional: a valorização do professor na Constituição de 1988

The paper investigates the legal mechanisms used by the Legislature and the Executive to implement the constitutional principle of the teacher s minimum wage, which is proclaimed in the Constitution as a strategy of professional appreciation for this category. The text demonstrates that the legal mechanisms used to value the teacher were: the 1988 Constitution, the constitutional amendments to this Charter updated and modified the original text in relation to the matter, and finally, the Minimum Wage Law . Article nº 206 of 1988 s Federal Constitution established that basic education teachers, who work in public schools, would be entitled to a national minimum wage. Law nº 11.738/2008 ( Minimum Wage Law ) regulated the matter and made other determinations on the relationship between the State and the teachers such as the establishment of parameters for the distribution of the workload of teachers. Based on this law, since 2009 the minimum wage has been set annually by the Federal Government. However, state governments and municipalities throughout Brazil protested prescriptions contained in the Minimum Wage Law . In this context, some governors and mayors led the Supreme Court regarding the constitutionality of this law. The complainants considered that there was unconstitutional by the following: definition of the teacher s workday, which in the complainants point of view was competence of local governments; ensuring that teachers receive salaries tied to the minimum wage with retroactive effect; transformation of the minimum wage in basic salary, lack of sufficient budget in the states and municipalities to honor with the new values to be paid to teachers and, finally, determining workload for the teacher to perform other activities besides classroom activities. At the trial held at the STF the majority of Ministers rejected the claim and considered that the Minimum Wage Law , taken together, was constitutional. However, this decision did not alter the position of the managers or the interpretation of the ministers who agreed with the unconstitutionality of some aspects of the law. This means that one law can present differences in interpretation between ordinary people and among members of the Judiciary. The search showed the following conclusions: the law is not a definitive parameter of justice, because it is deeply linked to various interests; the development, implementation, and judgment of laws dealing with minimum wage of teaching are linked to historical and cultural aspects of society; the demand for enhancement of teacher and setting a minimum wage has only emerged in the late twentieth century, a fact explained in this work based on data that indicate the recent concern of Brazilian State with schooling a phenomenon typically Republican and with the professionalization of teaching emerging concern from the knowledge society; the Legislative and Executive search mechanism to implement the minimum wage of the teachers because of the contemporary need for professionalization of teaching

Controle de Temperatura do Sistema de Refrigeração a água de uma tocha plasmática Indutiva Utilizando Lógica fuzzy

Este projeto propõe desenvolver e implementar um controlador para o sistema de refrigeração da tocha indutiva a plasma térmico. Este processo é feito a partir da medição da temperatura através de um sensor do sistema de refrigeração. O sinal produzido será enviado para uma entrada analógica do microcontrolador da família PIC, que utilizando os conceitos de lógica fuzzy, controla a velocidade de um motor bomba. Este é responsável por diminuir ou aumentar o fluxo circulante de água que passa pela bobina, pelo corpo da tocha e pelo flange de fixação, deixando-os na temperatura desejada. A velocidade desta bomba será controlada por um inversor de frequência. O microcontrolador, também, acionará um ventilador caso exceda a temperatura de referência. A proposta inicial foi o desenvolvimento do controle da temperatura da bobina de uma tocha indutiva a plasma, mas com algumas adequações, foi possível também aplicar no corpo da tocha. Essa tocha será utilizada em uma planta de tratamento de resíduos industriais e efluentes petroquímicos. O controle proposto visa garantir as condições físicas necessárias para tocha de plasma, mantendo a temperatura da água em um determinado nível que permita o resfriamento sem comprometer, no entanto, o rendimento do sistema. No projeto será utilizada uma tocha de plasma com acoplamento indutivo (ICPT), por ter a vantagem de não possuir eletrodos metálicos internos sendo erodidos pelo jato de plasma, evitando uma possível contaminação, e também devido à possibilidade do reaproveitamento energético através da cogeração de energia. O desenvolvimento da tecnologia a plasma na indústria de tratamento de resíduos vem obtendo bons resultados. Aplicações com essa tecnologia têm se tornado cada vez mais importantes por reduzir, em muitos casos, a produção de resíduos e o consumo de energia em vários processos industriais

Protótipo de uma unidade com tri-geração de energia para utilizações remotas: aplicação de módulo secondutivo gerador termoelétrico

The generation for termoeletricity is characterized as a solid process of conversion of thermal energy (heat) in electric without the necessity of mobile parts. Although the conversion process is of low efficiency the system presents high degree of trustworthiness and low requisite of maintenance and durability. Its principle is based on the studies of termogeneration carried through by Thomas Seebeck in 1800. The frank development of the technologies of solid state for termoeletricity generation, the necessity of the best exploitation of the energy, also with incentive the cogeneration processes, the reduction of the ambient impact allies to the development of modules semiconductors of high efficiency, converge to the use of the thermoeletric generation through components of solid state in remote applications. The work presents the development, construction and performance evaluation of an prototype, in pilot scale, for energy tri-generation aiming at application in remote areas. The unit is composed of a gas lamp as primary source of energy, a module commercial semiconductor for thermoelectric generation and a shirt for production of the luminosity. The project of the device made compatible a headstock for adaptation in the gas lamp, a hot source for adaptation of the module, an exchanger of to be used heat as cold source and to compose first stage of cogeneration, an exchanger of tubular heat to compose second stage of cogeneration, the elaboration of a converter dc-dc type push pull, adequacy of a system of acquisition of temperature. It was become fullfilled assembly of the prototype in group of benches for tests and assay in the full load condition in order to evaluate its efficiency, had been carried through energy balance of the unit. The prototype presented an electric efficiency of 0,73%, thermal of 56,55%, illumination of 1,35% and global of 58,62%. The developed prototype, as the adopted methodology of assay had also taken care of to the considered objectives, making possible the attainment of conclusive results concerning to the experiment. Optimization in the system of setting of the semicondutor module, improvement in the thermal insulation and design of the prototype and system of protection to the user are suggestions to become it a commercial product

Efeito da introdução de resíduo de cinza de forno cerâmico em massa para cerâmica estrutural

The red ceramics and structural ceramics, as they are known, include ceramic materials made by blocks of seals and structures, bricks, tiles, smail flagstones manacles, rustic floors and ornamental materials. Their fabrication uses raw material such as clay and clay sites, with some content of impurity. It has good durability and mechanical strength to compression, low cost, making it one of the mainly used materials in civil engineering. The incorporation of many industrial activities residue to ceramic products is a technological alternative for reducing the environmental impact caused by its carefree disposal. This incorporation can promote chemical change and inertness of metals from residue, by fixation in the glassy phase of ceramic during the burning stage. The main aim of this project is to study the technical feasibility of the addition of ceramic oven ash into formulations of mass for structural ceramics. In this project two kinds of clay (plastic and non-plastic) were used, as well as the ash from firewood used in the process of burning of structural ceramics. A group of experiments was outlined, which permitted the evaluation of the influence of the burning cycle in different temperatures of the ash content in formulations for ceramic blocks through technological properties, mechanical behavior and microstructure. Five samples were processed of each one of the masses of plastic and non-plastic clay without addition of ash and with addition of ash on the percentages of 10 % and 20 %, for temperatures of 850 °C, 950 °C, 1050 °C and 1150 °C, obtained through sinterization process. Among the studied compositions, the one which presented best performance was the mass of clay with 10 % of ash, at temperature of 1150 °C, with the smallest absorption of water, the smallest apparent porosity, specific apparent mass a bit over the others and greatest mechanical resistance to flexion. The composition made confirmed the technical feasibility of the use of ash in the mass for structural ceramics with maintenance of its necessary characteristics for its purposes

Estudo da introdução de resíduo de britagem de rocha calcária e cinza de biomassa de cana-de-açúcar em formulações de argamassas colantes

The adhesive mortars are a mixture of cement, sand, and additives to polymers that retain the mixing water and promotes adherence, being used in setting on various ceramic substrates. The sand used in the production of these mortars is from the riverbeds, and with the increasing restriction of these sands extraction by environmental agencies, and often having to be transported over long distances to the consumer center. This work aims to design and physical and mechanical characterization of ecological adhesive mortar with total replacement of natural sand by sand from the crushing of limestone, and the addition of mineral ash biomass of cane sugar in partial replacement cement used in the production of adhesive mortar , aiming compositions that meet the regulatory specifications for use adhesive mortar. Standardized tests to determine the tensile bond strength (NBR 14081-4), determination of open time (NBR 14081-3) and determination of slip (NBR 14081-5) were performed. Were also conducted trials squeeze flow in different formulation, the mortar with addition of 15 % gray biomass of cane sugar for cement mortars as well as the total replacement of natural sand by sand limestone crushing, got the best performance among the mortars studied, it was found that the addition of biomass to replace cement is perfectly feasible due to its pozzolanic activity, which contributed to this reduction in the cement matrix formation of adhesive mortar

Elaboração de atividades didáticas para o ensino de matemática a partir de livros antigos: o exemplo do leçons élémentaires de Lagrange

De nombreuses études sur l`utilisation pédagogique de l`histoire des mathématiques viennent a identifier les arguments qui sous-tiennent ces actions éducatives comme une façon d`aborder les mathématiques scolaires afin de mener les élèves à un apprentissage réflexif et significatif des mathématiques. Cherchant a vérifier, de manière pratique, comment ces relations entre histoire des mathématiques et l`enseignement des mathématiques peuvent se matérialiser sous la forme d`activités didactiques, nous avons effectué un sondage sur les oeuvres du mathématicien Joseph Louis Lagrange (1736-1813) et identifié le potentiel d`exploration éducatif, de l`oeuvre Leçons élémentaires sur les mathématiques données a l`École Normale en 1795, de cet mathématicien. L`objectif principal de notre étude était de faire des recherches sur le potentiel d`une oeuvre antique dédié à l`enseignement des mathématiques et de la considérer comme support conceptuel et didactique pour la création d`un modèle d`activités didactiques pour l`enseignement des mathématiques, dans la formation des enseignants de mathématiques et aussi en ce qui concerne l`apprentissage des mathématiques des élèves de l`école primaire. Nous avons fait une lecture, la traduction et l`ajout de notes et commentaires sur le travail et une recherche bibliographique sur la relation entre l`histoire des mathématiques et l`enseignement des mathématiques, de façon a comprendre les aspects conceptuels et didactiques pour l`élaboration d`um module activités didactiques pour l`enseignement des mathématiques basée sur certains chapitres du livre de Lagrange. À cette fin, l`oeuvre a été utilisé comme source primaire et a été étudié sous un fondement théorique appuyer sur les travaux des Institut de recherche sur l`enseignement des mathématiques IREM. Dans le module élaboré, les activités apportent les contenus dans une suite integrée à une logique de classe, à partir de la lecture directe des découpages du texte original, disposés entre les questions et les situations-problémes , historiquement mis en contexte avec la période et associés à des contenus spécifiques. Comme il s`agit d`une recherche basée sur l`exploitation de livres anciens, nous croyons que des modules d`activités basées sur des source primaires peuvent être utilisées comme un matériel pédagogique pour la formation des enseignants de mathématiques ainsi que pour les dernières années de l`école élémentaire, reformulées ou accrues d`autres questions telles l`intérêt de chaque enseignant qui l`utilise

Estrutura genética de Chromis multilineata (Guichenot, 1853) (Perciformes Pomacentridae) na costa NE do Brasil e ilhas oceânicas: evidências de um passado evolutivo instável.

The fauna of Brazilian reef fishes comprises approximately 320 species distributed along the coast of the mainland and islands ocean. Little is known about the levels of connectivity between their populations, but has been given the interest in the relations between the offshore and the islands of the Brazil, in a biogeographical perspective. The oceanic islands Brazilian hosting a considerable number of endemic species, which are locally abundant, and divide a substantial portion of its reef fish fauna with the Western Atlantic. Among the richest families of reef fish in species are Pomacentridae. This study analyzed through analysis of sequences of the mitochondrial DNA control region (D-loop), the standards-breeding population of C. Multilineata in different areas of the NE coast of Brazil, involving both oceanic islands (Fernando de Noronha Archipelago and of St. Peter and St. Paul) and continental shelf (RN and BA). To this aim, partial sequences were used in the region HVR1 of mtDNA (312pb). The population structure and parameters for the estimates of genetic variability, molecular variance (AMOVA), estimation of the index for fixing (FST) and number of migrants were determined. The phylogenetic relationships between the populations were estimated using neighbor-joining (NJ) method. A group of Bayesian analysis was used to verify population structure, according to haplotype frequency of each individual. The genetic variability of populations was extremely high. The populations sampled show moderate genetic structure, with a higher degree of genetic divergence being observed for the sample of the Archipelago of St. Peter and St. Paul. At smaller geographical scale, the sample of Rio Grande do Norte and the Archipelago of Fernando de Noronha do not have genetic differentiation. Three moderately differentiated population groups were identified: a population group (I), formed by the Rio Grande do Norte (I') and the archipelago of Fernando de Noronha (I''), and two other different groups formed by the island population of the archipelago of Saint Peter and St. Paul (II) and Bahia (III). The genetic patterns found suggest that the species has suffered a relatively recent radiation favoring the absence of shared haplotypes. C. multilineata seems to constitute a relatively homogenous population along the West Atlantic coast, with evidence of a moderate population genetic structure in relation to the Archipelago of St. Peter and St. Paul. These data supports the importance of the dispersal larvae by marine current and the interpopulation similarity this species.

Engenharia nos sertões nordestinos: o Gargalheiras, a Barragem Marechal Dutra e a comunidade de Acari, 1909-1958

In Brazil, between the late nineteenth and early decades of the twentieth, polytechnic engineers assumed an important role in discussing the establishment of a modern country. The problem of drought in northeastern Brazil gave the professionals performance, within an interventional process more mounts, the conception plans and measures for the purposeful integration of the territory afflicted. With the foundation of Inspetoria de Obras Contra as Secas (IOCS), in 1909, the actions to combat drought and would be institutionalized, them, studies performed out by technical and scientific committees would be systematically applied in the Brazilian Northeast. So, This work was central objective understand the historical process inplantation of a whole infrastructure of modern character by professional technical and their consequences within the Northeast Geographic space, in specific, in the municipality of Acari in the State of Rio Grande do Norte, in the first half of the twentieth century. The politics of the government, through technical education and scientific engineers polytechnics, would emphasize, during the twentieth century, the building of dams, and irrigation canals, wells, railways, highways, between other elements, that would soon transform the physical space-northeast, specifically, the territory acariense. These works began to contribute to the setting of man backcountry their land, promote the regular practice of agriculture even in periods of drought and, the integration, especially, economic of territory acariense the other producing regions of Rio Grande do Norte and the Northeast as well as promoting the modification of the landscape of the world backcountry. These actions functioned as elements of modernity and progress that transformed the space by favoring by favoring the formation of urban networks (urban) in this space

Satisfação dos usuários e qualidade dos tratamentos protéticos realizados nos centros de especialidades odontológicas da grande Natal RN

Aim: To evaluate user satisfaction and quality of prosthetic treatments performed in specialized dental clinics (CEOs) of Natal Metropolitan Region - RN. Methods: Cross-sectional study with subjects who underwent prosthetic CEOs in the cities of Natal, Macaíba, Parnamirim and Sao Goncalo do Amarante in the period 2007 to 2009. Data collection was performed by questionnaire, clinical examination of the oral cavity and examination of fabricated denture. This analysis involved the following aspects: retention, stability, aesthetics and prosthesis fixation. The variables are presented by means of absolute numbers and proportions. The determination of the association between the independent and dependent variables was conducted by the association of Chi-square test and Fisher exact test. Results: A total of 149 users, totaling 233 conventional dentures (148 upper and 85 lower). Most patients (56.4%) were rehabilitated with conventional complete dentures. The technical quality of the denture was regarded as satisfactory in the majority (52.7%), whereas the inferior dentures were rated as unsatisfactory in 90.5% of cases. Satisfaction with the prosthesis was 69.1% (N = 103). The average time to begin treatment was 3 months to receive while the prosthesis was 4 months old. The presence of injury from the upper prosthesis occurred in 21.5% of cases (N = 32), candidiasis being the most frequent (N = 18). The technical quality of the upper prosthesis (p=0,041), as well as retention (p=0,002) and stability (p<0,001) were significantly associated with user satisfaction. Conclusions: The specialized Dental clinics has been fulfilling its role of providing treatment of intermediate complexity for low-income population with the majority of satisfield patients, even when their dentures have problems of technical quality

A trapaça é rara, mas é bem lembrada: o efeito da cor da pele e do gênero na memória de faces

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Avaliação mecânica in vitro utilizando miniplacas quadradas e retangulares do sistema 2.0 mm em fraturas da região anterior de mandíbula

The aim of this study was to comparatively evaluate the mechanical strength of squared and rectangular 2.0 mm system miniplates comparing them to the standard configuration with 2 straight miniplates in stabilizing fractures in the anterior mandible. Ninety synthetic polyurethane mandible replicas were used in mechanical test. The samples were divided into six groups of three different methods for fixation. Groups 1, 2 and 3 showed complete fractures in symphysis, characterized by a linear separation between the medial incisor, and groups 4, 5 and 6 showed complete fractures in parasymphysis with oblique design. Groups 1 and 4 were represented by the standard technique with two straight miniplates parallel to each other. Groups 2 and 5 were stabilized by squared miniplates and groups 3 and 6 were fixed by rectangular design. Each group was subjected to a mechanical test at a displacement speed of 10 mm/min on a universal testing machine, receiving linear vertical load on the region of the left first molar. The values of the maximum load and when displacements reached 5 mm were obtained and statistically analyzed by calculating the confidence interval of 95%. Fixation systems using squared (G2) and rectangular (G3) miniplates obtained similar results. No statistically significant differences with respect to the maximum load and the load at 5 mm displacement were found when compared to standard method in symphyseal fractures (G1). In parasymphysis the fixation method using squared miniplates (G5) obtained results without significant differences regarding the maximum load and the load at 5 mm when compared to the standard configuration (G4). The fixation method using rectangular miniplates (G6) showed inferior results which were statistically significant when compared to the standard configuration (G4) for parasymphysis fractures. The mechanical behavior of the fixation methods was similar, except when rectangular miniplates were used. The fixation methods showed better results with statistical significance in symphyseal fractures

Avaliação clínica e radiográfica das complicações técnicas em próteses sobre implantes

The evaluation criteria of the cases treated with dental implants are based on clinical and radiographic tests. In this context it is important to conduct research to determine prognosis of different types of prosthetic rehabilitation and determination of the main problems affecting this type of treatment. Thus, the objective of this study was to assess the prosthetic conditions of individuals rehabilitated with implant-supported prosthesis. In this cross-sectional study 153 patients were treated, accounting for a sample of 509 implants. The failures were observed by clinical and radiographic examination. The results showed that the fracture (0.2%) loss (0.4%) and loosening of the screws (3.3%) were failures are less frequent. The fracture structures as the resin (12.4%), porcelain (5.5%) and metallic (1.5%), loss of resin that covers the screw (23.8%) and loss of retention overdentures on implants (18.6%) had a higher occurrence. The failure of adaptation between the abutment and the implant (6.9%) and especially between the prosthesis and the abutment (25.4%) had a high prevalence and, when related to other parameters showed a significant association, particularly with the cemented prosthesis (OR = 6.79). It can be concluded that to minimize the appearance of failures, protocols must be observed from diagnosis to the settlement and control of prostheses on implants, particularly with respect to technical steps of the making of the prosthesis and care in radiographic evaluating the fit between their components

A moralidade e a vida pregressa do candidato como condição autônoma de elegibilidade

The objective of this work was about fixing the free will paradigm as negative evaluation of political rights which presents a new classification dde such rights, producing species: a) conditions of eligibility autonomous (free will), b) eligibility requirements heteronomous (will third party) and c) ineligibility (court decisions / administrative). This morality and life history as a condition of eligibility unattended, making a hermeneutic analysis of art. 14, § 9 of the Constitution, considering the justification of the views of the voting Minister Carlos Ayres Brito Appeal in Ordinary No 1069/2006 of the Supreme Electoral Tribunal (where Eurico Miranda). Are fixed concepts of morality and life history from the perspective of the moral act freely and consciously. Has resulted in the identification of the moral virtues of honesty and integrity, which are voluntary acts as a reference to morality and integrity respectively. Justifies the morality and life history as a condition of eligibility unattended. who depend exclusively on the willingness of the candidate. It is noteworthy that the conditions for eligibility as a factual finding does not violate the law and does not allow punitive sanctions or setting a deadline in case of refusal to register the application. Attributed to political parties to take responsibility in their statutes moral criteria for the nomination convention in pre candidates, giving an ethical dimension. Analyzes the law under the Clean Record of morality and life history of the candidate and the possible impact on the electoral context

Calculando distância em geometria espacial usando material manipulável como recurso didático

This work presents a proposal for introducing the teaching of Geometry Space study attempts to demonstrate that the use of manipulatives as a teaching resource can be an alternative learning facilitator for fixing the primitive concepts of geometry, the postulates and theorems, position relationships between points, lines and planes and calculating distances. The development makes use of a sequence of activities aimed at ensuring that students can build a more systematic learning and these are divided into four steps