Estratégia de vida do peixe anual Hypsolebias antenori (Cyprinodontiformes: Rivulidae) do semiárido brasileiro

This work deals with the life strategy of an endangered annual fish, Hypsolebias antenori (Cyprinodontiformes: Rivulidae), of the Brazilian semiarid region. The eggs of these fish hatch at the onset of the rainy season, grows rapidly and they reproduce during the rainy season. When the water puddles dry out, the entire population dies. The resistant eggs which are buried in the bottom of the dried pools go through diapause stages, during which time the embryonic development becomes temporarily arrested. With the onset of the next rainy season, the eggs hatch and a new generation is formed. Specimens of H. antenori were captured during 2011 and 2013, in temporary water pools located in the hydrographic basin of river Jaguaribe in Ceará, Brazil. Sex ratio, the length-weight relationship, the growth type, first sexual maturity, anatomy and histology of the digestive tract, development of gonads, reproductive strategy, karyotypic pattern of the species, and the conservation status of H. antenori were investigated. The results of this study are presented in the form of eight articles. The first article is about the fish faunal composition of the hydrographic basins of Rio Grande do Norte, Brazil, wherein the record of H. antenori is included. The second article deals with the sex ratio, secondary sexual characteristics of males, the length-weight relationship and the type of growth. Males show a pattern of intense coloration with well developed fins. The sex ratio showed a significant predominance of females (1M:1.7 F). Males were larger in length and weight. The equation of weight and total length relationship was Wt=0.0271Lt3,8937, showing a positively allometric growth, indicating greater increase in weight than in length. The third article discusses the anatomy and histology of the digestive tract of H. antenori. It is considered as a generalist feeder with characteristics of omnivore, which utilizes different food sources. The fourth article discusses the stages and phases of gonad development and type of spawning of H. antenori. The fifth article is about the r reproductive strategy adopted by H. antenori which helps in successful reproduction over a short period of life. The sixth article deals karyotypic pattern of the species, constituting the first cytogenetic contribution to the genus. The seventh article discusses about the risk of extinction of this species which suffers a series of threats, such as, habitat loss through land use, deforestation, construction of reservoirs, pollution due to domestic and industrial sewage, besides pesticides and agrochemicals. Furthermore, decreasing rainfall and intensification of aridity due to global climate changes, interferes with the reproductive cycle. The eighth article deals with aggressive behavior adopted between males and among females during reproduction. All temporary water pools sampled during this study were in high degree of degradation, mainly due to human action. There is a great need for conservation measures to protect the populations of annual fish, including the creation of protected areas in the semiarid ephemeral aquatic environments of Brazil

Estudo da preferência manual durante o desenvolvimento ontogenético em sagüi comum ( Callithix jacchus)

The study of manual preference is a widely used approach to investigate cerebral laterality in nonhuman primates. However, in New World primates, little is known about the ontogenesis of hand use asymmetry, in both forced and spontaneous activities, as well as how they correlate with sexual hormones. Accordingly, a longitudinal study was conducted on the manual preference of 6 female and 4 male common marmosets (Callithrix jacchus). The study included the record of forced tests to reach for the food using only one hand (forced activity) and activities such as grooming (auto and social), scratching, grasping the food and hanging, in weekly sessions from the infantile (4 months) to the early adult phase (15 months). Feces samples were also collected, at least once a week, to evaluate the level of gonadal steroids and their influence on these behaviors. In the forced activity, the results confirm the influence of the development period on manual preference during feeding, shown by the increase in lateral stability when grasping the food between the juvenile and adult phases. During this period, a sexual hormone effect on development was also observed, mainly of progesterone in females and androgen in males, but no difference between sexes was found. In the females, progesterone also influenced the manual preference index, with a proportional increase in the degree of manual asymmetry during puberty. With respect to spontaneous activities, the animals showed proportional use of both hands when scratching, hanging, holding the food and grooming. A positive correlation was also found between the preference for holding the food in forced activities and in spontaneous activities

Avaliação do cortisol, dehidroepiandrosterona sulfato e dos perfis lipídico e imunológico e suas correlações com a sensibilidade dolorosa, depressão e funcionalidade em mulheres com fibromialgia na pós-menopausa

Fibromyalgia (FM) is a non-inflammatory rheumatic syndrome characterized by widespread musculoskeletal pain with palpable tender points, muscle stiffness, fatigue, and sleep disturbances. Patients with FM have hormonal changes that are directly correlated with symptoms of the syndrome. The neuroendocrine regulation may be impaired, with abnormalities in the hypothalamus-pituitary-adrenal (HPA) axis with various hormones showing changes in their levels. In women in fertile period, various gonadal hormones are associated with symptoms of the syndrome, but studies focusing only a population of women in post-menopausal period who do not use hormone replacement are rare. We developed an analytical cross sectional study to assess the plasma levels of cortisol and dehidroepiandrosterona sulfate (DHEA-S) with quimioluminescence method in a group of 17 women with FM and 19 healthy women in post-menopause who do not use hormone replacement and observe the correlation with the symptoms of pain through algometry, depression and physical functional capacity measured from the Beck Depression Index (BDI) and the Fibromyalgia Impact Questionnaire (FIQ). Three blood samples were collected in the morning (between 8:00 9:30) with an interval of 24 hours for the measurements of hormonal levels and biochemical profile. There were no immunological or lipid changes in patients with FM. Comparing the two groups, there is no difference in levels of cortisol and a tangential effect for DHEA-S (p=0,094) with the lowest levels in the FM. DHEA-S also correlated with pain threshold (r=0,7) and tolerance (r=0,65) in group FM. We found the presence of depressive state and low physical functional capacity in FM. It was also evident that women in post-menopausal period, DHEA-S should influence the symptoms of increased sensitivity to pain, but not the presence of depressive status and low physical functional

Ausência do pai ao longo do desenvolvimento ontogenético e indicadores de desconto de futuro: uma contribuição da psicologia evolucionista

The new Evolutionary Psychology (E. P.) paradigm has been trying to understand how the human beings make their decisions over time regarding the most diverse variables, always bearing in mind that such a cognitive process is due to a complex natural selection process that occurred millions of years ago. One of the main topics discussed by this new paradigm is the issue of parental investment, i.e., the care the parents provide to an offspring at the expense of the investment into a new one. The present work sought to integrate these two topics, trying to understand how some variables modulate the process of decision making in a sample of the city of Natal, Rio Grande do Norte state. It was investigated the hypothesis that the presence of both parents, along the individual development, could signal a more favorable environment, providing clues to the individual that he could assume a competitive position at the socio-biological market. His decisions, therefore, could be guided by long-term investments with aims to obtain more robust rewards. On the contrary, those who has suffered for some moment the absence of one the parents could develop theirselves in a not so competitive way, starting to choose immediate benefits - but lesser ones -, since the future would be less predictable due to their worse development conditions. This study involved 152 individuals from three higher education institutions, one of them being public and the others being private ones. In the results found, there was no difference between children of coupled parents and children of deceased or divorced parents concerning discount rates. The levels of hopelessness did not affect the discount rates of children of single parents when compared to children of coupled parents. Not having one of the parents because of divorce made the child to tend to present lower scores in the domain of social relations of WHOQOL - Bref, whilst the absence of the father by death made the scores lower in the domain of environment. The results indicate that loosing one of the parents along the development influences the individual's quality of life perception, but the measurement method of future discounting rates by means of financial choices is not sensitive to this variation

Acolhimento institucional e desenvolvimento moral: a generosidade em crianças de quatro a seis anos de idade em situação de abrigo

This research has as main proposal to verify how the virtue of generosity, considered as one of the important aspects of moral development on children, shows itself in children between four and six years old in institutional welcome condition. Toward this aim, knowledge in Human Development Psychology, specifically Jean Piaget and his contemporary collaborators, were associated to philosophic knowledge, with emphasis in Kant and Aristotle. The research took place in an institutional welcome service in the town of Natal-RN, between February and May of 2009, witch is responsible to offer care to children from zero till six years old. As procedure were used: the rulebased game Memory Game ; the childhood story One note fight ; and observations of the institution s everyday. The corpus analysis was done by the Thematic Content Analysis method. In general, in the daily observations, children showed themselves more co-operative and generous than in the executed procedures, mainly when the matter subject was other´s well-being. The duty, Kantian perspective, was overcome by the Aristotelian sumo bem, classified as generous act of afford to other what is not posted as right, however guaranteed by solidarity

Entre a hegemonia e a polissemia: a Política de Educação e Desenvolvimento para o SUS no contexto do Brasil contemporâneo

The proposal of the Unified Health System Policy (SUS) has been considered one of the most democratic public policies in Brazil. In spite of this, its implementation in a context of social inequalities has demanded significant efforts. From a socio-constructionist perspective on social psychology, the study focused on the National Policy for Permanent Education in Health for the Unified Health System (SUS), launched by the Brazilian government in 2004, as an additional effort to improve practices and accomplish the effective implementation of the principles and guidelines of the Policy. Considering the process of permanent interdependencies between these propositions and the socio-political and cultural context, the study aimed to identify the discursive constructions articulated in the National Policy for Permanent Education in Health for the Unified Health System (SUS) and how they fit into the existing power relations of ongoing Brazilian socio-political context. Subject positionings and action orientation offered to different social actors by these discursive constructions and the kind of practices allowed were also explored, as well as the implementation of the proposal in Rio Grande do Norte state and how this process was perceived by the people involved. The information produced by documental analyses, participant observation and interviews was analyzed as proposed by Institutional Ethnography. It evidenced the inter-relations between the practices of different social actors, the conditions available for those practices and the interests and power relations involved. Discontinuities on public policies in Brazil and the tendency to prioritize institutional and personal interests, in detriment of collective processes of social transformation, were some of obstacles highlighted by participants. The hegemony of the medical model and the individualistic and curative intervention practices that the model elicits were also emphasized as one of the drawbacks of the ongoing system. Facing these challenges, reflexivity and dialogism appear as strategies for a transformative action, making possible the denaturalization of ongoing practices, as well as the values and tenets supporting them

Desenvolvimento de um biossensor potenciométrico, à base de soja, para a determinação de uréia

In this work, the objective in study was the development of a biossensor potencyometric for urea detection, starting from the extracted urease of soy grains. Initially, was made a chemometrics study, through a planning factorial 24, objectified to find great conditions for the extraction of the urease without its properties were affected. Starting from this study, the best conditions were determined for the obtaining of rich extracts in urease, allowing the biossensors making with good characteristics. These were made using a platinum electrode as transducer with the dispersed urease in chitosan head office and reticulated in glutaraldehyde vapor. The biossensors obtained presented a limit of urea detection the same to 0,33 mM and lineal strip between 0,33 and 3 mM of the substratum. The time of answer was considered loud, mainly, in low concentrations of the substratum, where it was taken about 5 minutes by analysis. For high concentrations that time was reduced for not more than one minute. The time of life was limited by the adherence of the enzymatic membrane to the transducer, but it was possible to maintain the biossensor with operation for one month with about 50 accomplished measures. Application of the biossensor for analyses of fertilizers to the urea base presented excellent result for a sample with few interfering, but it was different when the used fertilizer was originating from of a complex sample. Even so the label was not expressed the text of nitrogen it was totally coming of the urea. An evaluation of the kinetic parameters of the catalytic reaction of the biossensor showed coherence with the results exposed in the literature

Desenvolvimento de uma metodologia para caracterização de amostras de sedimento: Rio Jundiaí RN

The study of sediment in water bodies presents great environmental importance, because of its ability to adsorb the pollutants, they may facilitate the understanding of the history of the current quality of the water system. Depending on how it is done the collection, analysis can show both a recent contamination as old. The detailed characterization of the sediment may reveal details that can understand how each type of pollutant interacts with the material given its composition. In this work it has developed a systematic methodology to characterize samples of sediment, with the aim to understand how a series of metal is distributed in different size fractions of the sediment. This study was conducted in five samples of sediment (P1, P2, P3a, P3B and P3c) collected in Jundiaí river, one of the most important tributaries of the river Potengi in the region of Macaíba, RN. The characterization was made with the samples previously sieved into meshes with different granulometries (+8#, -8+16#, -16+65# - 65+100#,-100+200#,-200+250# and -250#), using the following techniques: Analysis of specific surface area by BET method, determining the levels of organic matter (OM%) and humidity through the gravimetry and Analysis Thermogravimetric (TG), Infrared Spectroscopy in a Fourier transform (FTIR ), Analysis of X ray diffraction (XRD), analysis of heavy metals by optical emission spectrometry with the Argon Plasma (ICP-OES). The analyzed elements were Al, Cd, Cr, Cu, Fe, Mn, Ni, Zn and P. In addition to the techniques of characterization above, was also made the rebuilding of the samples P1, P2 and P3B in relation to the levels of organic matter and concentration of heavy metals. Then, the results of the recomposed samples were compared with those obtained in crude samples, showing great consistency. The gravimetry, used in determining the levels of organic matter, was not considered an appropriate method because the clay minerals present in the sediment samples analyzed fall apart in the same range of temperature (550-600 0C) used in roasting (600 0C). The results also showed the trend of organic matter and heavy metals to focus on the thin fractions, although the largest concentrations of metals are in intermediate fractions

Desenvolvimento de componentes nanométricos para aplicação em células a combustível à base de sólidos estruturados e filmes finos

The present work aims the preparation of filmes of strontium-doped lanthanum manganite (perovskita) yttria-stabilized zirconia (LSM-SDC) films deposited on substrate of YSZ by means of spin coating technique having as principal objective their application to solid oxide fuel cells of intermediate temperature. La0,8Sr0,2MnO3 and Ce0,8Sm0,2O1,9 were obtained by modified Pechini method by use of gelatin which act as polymerization agent. The powders obtained were characterized by Xray fluorescence, X ray diffraction, electronic scanning microscopy and the superficial area by BET method. The results obtained by X-ray fluorescence showed that the route adopted for obtention of powders was effective in the obtention of the compositions with close values to the stoichiometrics. Ethyl cellulose was used as pore-forming agent and mixed with the LSM-SDC powders in weight proportions of 1:24, 2:23 and 1:9. The films were sintered at 1150 °C for 4 h and characterized by X-ray diffraction and scanning electron microscopy technique (SEM) and atomic force. The phases quantification of the precursory powders and of the obtained films was carried through Rietveld method. According with the analysis of SEM, as the content of ethyl cellulose was increased, the pore distribution in films become more uniform and the pore size reduced. The methodology used for the obtention of the films was very efficient, considering a material was obtained with characteristics that were proper to the application as electrolyte/cathode system to solid oxide fuel cells

Desenvolvimento de um novo complexo macrocíclico do sistema cobalto cyclam

In this work were synthesized and studied the spectroscopic and electrochemical characteristics of the coordination compounds trans-[Co (cyclam)Cl2]Cl, trans- Na[Co(cyclam)(tios)2], trans-[Co(en)2Cl2]Cl and trans-Na[Co(en)2(tios)2], where tios = thiosulfate and en = ethylenediamine. The compounds were characterized by: Elemental Analysis (CHN), Absorption Spectroscopy in the Infrared (IR), Uv-Visible Absorption Spectroscopy, Luminescence Spectroscopy and Electrochemistry (cyclic voltammetry). Elemental Analysis (CHN) suggests the following structures for the complex: trans- [Co(cyclam)Cl2]Cl.6H2O and trans-Na[Co(cyclam)(tios)2].7H2O. The electrochemical analysis, when compared the cathodic potential (Ec) processes of the complexes trans- [Co(cyclam)Cl2]Cl and trans-[Co(en)2Cl2]Cl, indicated a more negative value (-655 mV) for the second complex, suggesting a greater electron donation to the metal center in this complex which can be attributed to a greater proximity of the nitrogen atoms of ethylenediamine in relation to metal-nitrogen cyclam. Due to the effect of setting macrocyclic ring to the metal center, the metal-nitrogen bound in the cyclam are not as close as the ethylenediamine, this fact became these two ligands different. Similar behavior is also observed for complexes in which the chlorides are replaced by thiosulfate ligand, trans-Na[Co(en)2(tios)2] (-640 mV) and trans-Na[Co(cyclam)(tios)2] (-376 mV). In absorption spectroscopy in the UV-visible, there is the band of charge transfer LMCT (ligand p d* the metal) in the trans-Na[Co(cyclam)(tios)2] (350 nm, p tios  d* Co3+) and in the trans-Na[Co(en)2(tios)2] (333 nm, p tios d* Co3+), that present higher wavelength compared to complex precursor trans- [Co(cyclam)Cl2]Cl (318 nm, pCl  d* Co3+), indicating a facility of electron density transfer for the metal in the complex with the thiosulfate ligand. The infrared analysis showed the coordination of the thiosulfate ligand to the metal by bands in the region (620-635 cm-1), features that prove the monodentate coordination via the sulfur atom. The νN-H bands of the complexes with ethylenediamine are (3283 and 3267 cm-1) and the complex with cyclam bands are (3213 and 3133 cm-1). The luminescence spectrum of the trans-Na[Co(cyclam)(tios)2] present charge transfer band at 397 nm and bands dd at 438, 450, 467, 481 and 492 nm.

Desenvolvimento e teste de um modelo estatístico de identificação das proporções de água produzida em zonas de produção de um campo maduro de petróleo

This study investigates the chemical species produced water from the reservoir areas of oil production in the field of Monte Alegre (onshore production) with a proposal of developing a model applied to the identification of the water produced in different zones or groups of zones.Starting from the concentrations of anions and cátions from water produced as input parameters in Linear Discriminate Analysis, it was possible to estimate and compare the model predictions respecting the particularities of their methods in order to ascertain which one would be most appropriate. The methods Resubstitution, Holdout Method and Lachenbruch were used for adjustment and general evaluation of the built models. Of the estimated models for Wells producing water for a single production area, the most suitable method was the "Holdout Method and had a hit rate of 90%. Discriminant functions (CV1, CV2 and CV3) estimated in this model were used to modeling new functions for samples ofartificial mixtures of produced water (producedin our laboratory) and samples of mixtures actualproduced water (water collected inwellsproducingmore thanonezone).The experiment with these mixtures was carried out according to a schedule experimental mixtures simplex type-centroid also was simulated in which the presence of water from steam injectionin these tanks fora part of amostras. Using graphs of two and three dimensions was possible to estimate the proportion of water in the production area

Desenvolvimento de misturas ternárias para remoção de reboco de fluido de perfuração sintético

The construction of wells is one of the most important activities of the oil industry. The drilling process is the set of activities and operations to design, program and perform the opening thereof. During this process, the cuttings are removed by the drilling fluid, or mud, and carted to the surface. This fluid is injected into the drill string and returns to the surface through the annular space between the well walls and the drill string. After the descent of the column casing, the annular space between the casing string and the walls of the borehole is filled with cement so as to secure the spine and prevent any migration of fluids between the various permeable zones traversed by the well behind of the coating. To ensure the good quality of the cementation scrubbers are used mattresses which are pumped ahead of the cement slurry so as to avoid contamination of the drilling fluid paste, or vice versa, and assist in the removal of plaster, formed by drilling fluid of the borehole walls, thus enabling a better cement bond to the well. Within this context, this work aims to evaluate the efficiency of mattresses scrubbers, the basis of ionic and nonionic surfactants, on the removal of nonaqueous drilling fluid, based on n-paraffin in oil wells, and the compatibility between the Mattress relations washer / drilling fluid bed scrubber / cement paste mattress washer / cement slurry / drilling fluid and the drilling fluid / cement slurry using laboratory tests rheology, thickening time and compressive strength. Also technique was performed X-ray diffraction (XRD) for a more detailed analysis of these mixtures with hydrated cement paste. In compatibility tests the conditions of temperature and pressure used in the same laboratory procedure simulating the conditions of oil wells, the well is considered the depth of 800 m. The results showed that the compositions of the mattress washer nonionic, KMS obtained a 100% efficient in removing the non-aqueous drilling fluid, and the best formulation showed good results with respect to compliance testing

Desenvolvimento de metodologia capaz de detectar e quantificar misturas de corantes em sucos artificiais em pó

Foi desenvolvido um método para detectar e quantificar misturas de corantes em sucos artificiais em pó fabricados no Brasil, de diferentes marcas e sabores. Foram estudados 6 corantes artificiais: amarelo tartrazina, amarelo crepúsculo, vermelho ponceau 4R, vermelho bordeaux S, vermelho 40 e azul brilhante presentes de forma unitária ou em misturas nos sucos com sabores laranja, tangerina, maracujá, abacaxi, limão e uva. A identificação dos corantes nas amostras foi feita através da comparação com os espectros dos padrões, utilizando-se a análise por infravermelho médio e pelos respectivos valores de absorção máxima nos comprimentos de onda relativos aos padrões e valores de referência na literatura. Também foram estudados os perfis de decomposição térmica por termogravimetria, termogravimetria derivada e calorimetria diferencial exploratória dos corantes e dos sucos em pó, sendo determinados os teores de umidade, de matéria orgânica e de cinzas. O teor de umidade encontrado não ultrapassou 4% para todas as amostras de suco analisadas. Com relação ao teor de matéria orgânica obteve-se para 57% dos sucos analisados um teor médio de 51,3% e para 43% das outras amostras obteve-se uma média de 67,2 %. Os resultados obtidos para o teor de cinzas indicaram que 29% das amostras apresentaram um teor de 26,7% para esse parâmetro enquanto 71% das amostras apresentaram um teor de cinzas de 46,4%. Os resultados obtidos por análise térmica mostraram-se adequados considerando-se que para obter os resultados pelo método tradicional há um investimento maior de tempo, de pessoal envolvido e de material, além da proteção ao meio ambiente. Para a análise por espectroscopia de absorção molecular foi proposta uma equação simplificada para a determinação de cada corante na mistura utilizando-se a lei de Beer. Para validação, empregou-se a espectroscopia de absorção molecular no visível, onde foi investigada a influência dos interferentes (TiO2 e açúcar) presentes nas amostras de sucos, os testes de fotodegradação e a avaliação do efeito do pH. Para quantificação tomou-se como referência 512 amostras sintéticas contendo um e dois corantes (1,5625 a 25,000 mg L-1) para obtenção das curvas analíticas que foram aplicadas à análise dos sucos em pó. Os resultados indicaram que o teor máximo do amarelo crepúsculo foi encontrado nos sucos com os sabores laranja, tangerina e manga que correspondeu a 25,6% da ingestão diária aceitável (para ser ultrapassada corresponderia a ingestão de 4 copos). O teor máximo encontrado para o amarelo tartrazina nos sucos foi para o sabor maracujá que correspondeu a 8,5% da ingestão diária aceitável, (para ser alcançado corresponderia a ingestão de 12 copos). O método proposto foi testado e validado com sucesso para amostras de sucos em pó sendo de simples execução e de rapidez na obtenção dos resultados

Desenvolvimento de catalisadores bifuncionais de óxido de zircônio modificado por óxidos de tungstênio e molibdênio contendo platina para a reação de isomerização de n-parafinas

Bifunctional catalysts based on zircon oxide modified by tungsten (W = 10, 15 and 20 %) and by molybdenum oxide (Mo= 10, 15 e 20 %) containg platinum (Pt = 1%) were prepared by the polymeric precursor method. For comparison, catalysts the tungsten base was also prepared by the impregnation method. After calcinations at 600, 700 and 800 ºC, the catalysts were characterized by X-ray diffraction, fourier-transform infrared spectroscopy, thermogravimetric and differential thermal analysis, nitrogen adsorption and scanning electron microscopy. The profile of metals reduction was determined by temperature programmed reduction. The synthesized catalysts were tested in n-heptane isomerization. X-ray diffractogram of the Pt/WOx-ZrO2 and Pt/MoOx-ZrO2 catalysts revealed the presence of tetragonal ZrO2 and platinum metallic phases in all calcined samples. Diffraction peaks due WO3 and ZrO2 monoclinic also were observed in some samples of the Pt/WOx-ZrO2 catalysts. In the Pt/MoOx-ZrO2 catalysts also were observed diffraction peaks due ZrO2 monoclinic and Zr(MoO4)2 oxide. These phases contained on Pt/WOx-ZrO2 and Pt/MoOx-ZrO2 catalysts varied in accordance with the W or Mo loading and in accordance with the calcination temperature. The infrared spectra showed absorption bands due O-W-O and W=O bonds in the Pt/WOx-ZrO2 catalysts and due O-Mo-O, Mo=O and Mo-O bonds in the Pt/MoOx-ZrO2 catalysts. Specific surface area for Pt/WOx-ZrO2 catalysts varied from 30-160 m2 g-1 and for the Pt/MoOx-ZrO2 catalysts varied from 10-120 m2 g-1. The metals loading (W or Mo) and the calcination temperature influence directly in the specific surface area of the samples. The reduction profile of Pt/WOx-ZrO2 catalysts showed two peaks at lower temperatures, which are attributed to platinum reduction. The reduction of WOx species was evidenced by two reduction peak at high temperatures. In the case of Pt/MoOx-ZrO2 catalysts, the reduction profile showed three reduction events, which are attributed to reduction of MoOx species deposited on the support and in some samples one of the peak is related to the reduction of Zr(MoO4)2 oxide. Pt/WOx-ZrO2 catalysts were active in the n-heptane isomerization with high selectivity to 3-methyl-hexane, 2,3- dimethyl-pentane, 2-methyl-hexane among other branched hydrocarbons. The Pt/MoOx-ZrO2 catalysts practically didn't present activity for the n-heptane isomerization, generating mainly products originating from the catalytic cracking

Bolton freeware: aplicativo de avaliação de discrepância de massa dentária desenvolvido pelo programa de pós-graduação em odontologia/UFRN

The calculation of tooth mass discrepancy, essential for good planning and a proper orthodontic finishing, when performed manually, besides being laborious, requires considerable time consumption. The aim of this study was to develop and test Bolton Freeware, a software for analysis of the tooth mass discrepancy of Bolton, aiming to minimize the consumption of time in a less onerous way. The digital analysis of the software was done by means of two-dimensional scanning of plaster study models and compared to manual evaluation (gold standard), using 75 pairs of stone plaster study models divided into two groups according to the magnitude of the Curve of Spee (group I from 0 to 2 mm, group II greater than 2 to 3mm). All the models had permanent dentition and were in perfect condition. The manual evaluation was performed with a digital caliper and a calculator, and the time required to perform the analysis for both methods was recorded and compared. In addition, the software was evaluated by orthodontists regarding its use, by means of questionnaires developed specifically for this purpose. Calibration was performed prior to manual analysis, and excellent levels of inter-rater agreement were achieved, with ICC > 0.75 and r > 0.9 for total and anterior proportion. It was observed in the evaluation of error of the digital method that some teeth showed a significant systematic error, being the highest measured at 0.08 mm. The analysis of total tooth mass discrepancy performed by Bolton Freeware, for those cases in which the curve of Spee is mild and moderate, differ from manual analysis, on average, 0.09 mm and 0.07 mm respectively, for each tooth evaluated, with r> 0, 8 for total and anterior proportion. According to the specificity and sensitivity test, Bolton Freeware has an improved ability to detect true negatives, i.e. the presence of discrepancy. The Bolton analysis digitally performed was faster, with an average difference of time consumed to perform the analysis of Bolton between the two methods of approximately 6 minutes. Most experts interviewed (93%) approved the usability of the software