Intuitive haptic control surface for mobile robot motion control

Haptic human-machine interfaces and similar techniques to enhancing human-robotic interaction offer significant potential over conventional approaches. This work considers achieving intuitive motion control of a tracked mobile robotic platform utilising a 3D virtual haptic cone. The 3D haptic cone extends upon existing approaches by introducing of a third dimension to the haptic control surface. It is suggested that this approach improves upon existing methods by providing the human operator with an intuitive method for issuing vehicle motion commands whilst still facilitating simultaneous real-time haptic augmentation regarding the task at hand. The presented approach is considered in the context of mobile robotic teleoperation however offers potential across many applications. Using the 2D haptic control surface as a benchmark, preliminary evaluation of the 3D haptic cone approach demonstrates a significant improvement in the ability to command the robot to cease motion.

Intuitive haptic control surface for mobile robot motion control

Haptic human-machine interfaces and similar techniques to enhancing human-robotic interaction offer significant potential over conventional approaches. This work considers achieving intuitive motion control of a tracked mobile robotic platform utilising a 3D virtual haptic cone. The 3D haptic cone extends upon existing approaches by introducing of a third dimension to the haptic control surface. It is suggested that this approach improves upon existing methods by providing the human operator with an intuitive method for issuing vehicle motion commands whilst still facilitating simultaneous real-time haptic augmentation regarding the task at hand. The presented approach is considered in the context of mobile robotic teleoperation however offers potential across many applications. Using the 2D haptic control surface as a benchmark, preliminary evaluation of the 3D haptic cone approach demonstrates a significant improvement in the ability to command the robot to cease motion.

3D virtual haptic cone for intuitive vehicle motion control

Haptic human-machine interfaces and interaction techniques have been shown to offer advantages over conventional approaches. This work introduces the 3D virtual haptic cone with the aim of improving human remote control of a vehicle's motion. The 3D cone introduces a third dimension to the haptic control surface over existing approaches. This approach improves upon existing methods by providing the human operator with an intuitive method for issuing vehicle motion commands whilst simultaneously receiving real-time haptic information from the remote system. The presented approach offers potential across many applications, and as a case study, this work considers the approach in the context of mobile robot motion control. The performance of the approach in providing the operator with improved motion controllability is evaluated and the performance improvement determined.

Bilateral haptic teleoperation of an articulated track mobile robot

Teleoperation has been used in many applications, allowing a human operator to remotely control a robotic system in order to perform a particular task. Recently haptic teleoperation has focused mainly on improving performance in remote manipulation tasks, however the haptic approach offers similar advantages for teleoperative control of the motion of a mobile robot. This paper describes a prototype system designed to facilitate haptic teleoperation of an all-terrain, articulated track mobile robot. This system utilizes a multi-modal user interface intended to improve operator immersion, reduce operator overload and improve teleoperative task performance. The system architecture facilitates implementation of an application-specific haptic augmentation algorithm in order to improve operator performance in challenging real-world tasks. The contributions of this work can be categorized as the custom mobile platform, teleoperator interface and haptic augmentation strategy.

A reinforcement learning approach for robot control in an unknown environment

In this paper, a control approach based on reinforcement learning is present for a robot to complete a dynamic task in an unknown environment. First, a temporal difference-based reinforcement learning algorithm and its evaluation function are used to make the robot learn with its trials and errors as well as experiences. Second, the simulation are carried out to adjust the parameters of the learning algorithm and determine an optimal policy by using the models of a robot. Last, the effectiveness of the present approach is demonstrated by balancing an inverse pendulum in the unknown environment.

Haptic mobility control for teleoperated rovers

Future missions involving human and robotic systems co-resident on the lunar surface may call for rovers to be teleoperated from the safety of pressurized habitats or vehicles. An approach is presented that emphasizes human-level judgment and intuition in the total control of a rover’s mobility actions. This is facilitated through human-robotic haptics interaction. The concept of a haptics cone control surface is presented, which provides a teleoperator with a means to intuitively determine the velocities he/she is commanding to control rover motion. The teleoperator is also provided with real-time, tasks-relevant haptic augmentation indicating suggestive control actions concerning the desired mobility objective. Utility of the approach for teleoperated control of steep terrain traversal is demonstrated in simulation.

Visual feedback control of a robot in an unknown environment (learning control using neural networks)

In this paper, a visual feedback control approach based on neural networks is presented for a robot with a camera installed on its end-effector to trace an object in an unknown environment. First, the one-to-one mapping relations between the image feature domain of the object to the joint angle domain of the robot are derived. Second, a method is proposed to generate a desired trajectory of the robot by measuring the image feature parameters of the object. Third, a multilayer neural network is used for off-line learning of the mapping relations so as to produce on-line the reference inputs for the robot. Fourth, a learning controller based on a multilayer neural network is designed for realizing the visual feedback control of the robot. Last, the effectiveness of the present approach is verified by tracing a curved line using a 6-degrees-of-freedom robot with a CCD camera installed on its end-effector. The present approach does not necessitate the tedious calibration of the CCD camera and the complicated coordinate transformations.

3D locomotion biomimetic robot fish with haptic feedback

This thesis developed a biomimetic robot fish and built a novel haptic robot fish system based on the kinematic modelling and three-dimentional computational fluid dynamic (CFD) hydrodynamic analysis. The most important contribution is the successful CFD simulation of the robot fish, supporting users in understanding the hydrodynamic properties around it.

A haptically enabled low-cost reconnaissance platform for law enforcement

Traditionally, the control system of a modern teleoperated mobile robot consists of one or more two-dimensional joysticks placed on a control interface. While this simplistic interface allows an operator to remotely drive the platform, feedback is limited to visual information supplied by on-board cameras. Significant advances in the field of haptics have the potential to meaningfully enhance situational awareness of a remote robot. The focus of this research is the augmentation of Deakin University's OzBot trade MkIV mobile platform to include haptic control methodologies. Utilising the platform's inertial measurement unit, a remote operator has the ability to gain knowledge of the vehicle's operating performance and terrain while supplying a finer level of control to the drive motors. Our development of a generic multi-platform ActiveX allows the easy implementation of haptic force feedback to many computer based robot controllers. Furthermore, development of communication protocols has progressed with Joint Architecture for Unmanned Systems (JAUS) compliance in mind. The haptic force control algorithms are presented along with results highlighting the benefits of haptic operator feedback on the MklV OzBot trade chassis.

Multi-agent model for robotic assembly system

In this paper, a multi-agent based model for a robotic assembly system is presented. Firstly, an organization model is used to construct the multi-agent model. Secondly, a dynamic self-organizing method is then put forward for the multi-agent robotic system to bid and contract the operations. Thirdly, a real multi-agent robotic system is built and assembly experiments are carried out. Finally, the experimental results confirm that the present multi-agent robotic system has flexibility, adaptation and stability.

Extending an industrial root controller : implementation and applications of a fast open sensor interface

An overview is given of the design and implementation of a platform for fast external sensor integration in an industrial robot system called ABB S4CPlus. As an application and motivating example, the implementation of force-controlled grinding and deburring within the AUTOFETT-project is discussed. Experiences from industrial usage of the fully developed prototype confirms the appropriateness of the design choices, thus also confirming the fact that control and software need to be tightly integrated. The new sensor can be used for the prototyping and development of a wide variety of new applications

Haptic control methodologies for telerobotic stair traversal

Teleoperated mobile robots provide the ability for a human operator to safely explore and evaluate hazardous environments. This ability represents an important progression towards the preservation of human safety in the inevitable response to situations such as terrorist activities and urban search and rescue. The benefits of removing physical human presence from such environments are obvious, however challenges inhibiting task performance when remotely operating a mobile robotic system need to be addressed. The removal of physical human presence from the target environment introduces telepresence as a vital consideration in achieving the desired objective. Introducing haptic human-robotic interaction represents one approach towards improving operator performance in such a scenario. Teleoperative stair traversal proves to be a challenging task when undertaking threat response in an urban environment. This article investigates the teleoperation of an articulated track mobile robot designed for traversing stairs in a threat response scenario. Utilising a haptic medium for bilateral human-robotic interaction, the haptic cone methodology is introduced with the aim of providing the operator with a vision-independent, intuitive indication of the current commanded robot velocity. The haptic cone methodology operates synergistically with the introduced fuzzy-haptic augmentation for improving teleoperator performance in the stair traversal scenario.

Haptic control of multi-axis robotic systems

Control of tele-operated remote robot’s is nothing new; the public was introduced to this 'new' field in 1986 when the Chernobyl cleanup began. Pictures of weird and wonderful robotic workers pouring concrete or moving rubble flooded the world. Integration of force feedback or 'haptics' to remote robot's is a new development and one that is likely to make a big difference in man-machine interaction. Development of haptic capable tele-operation schema is a challenge. Often platform specific software is developed for one off tasks. This research focussed on the development of an open software platform for haptic control of multiple remote robotic platforms. The software utilises efficient server/client architecture for low data latency, while efficiently performing required kinematic transforms and data manipulation in real time. A description of the algorithm, software interface and hardware is presented in this paper. Preliminary results are encouraging as haptic control has been shown to greatly enhances remote positioning tasks.

3D virtual haptic cone for intuitive vehicle motion control

Haptic technology provides the ability for a system to recreate the sense of touch to a human operator, and as such offers wide reaching advantages. The ability to interact with the human's tactual modality introduces haptic human-machine interaction to replace or augment existing mediums such as visual and audible information. A distinct advantage of haptic human-machine interaction is the intrinsic bilateral nature, where information can be communicated in both directions simultaneously. This paper investigates the bilateral nature of the haptic interface in controlling the motion of a remote (or virtual) vehicle and presents the ability to provide an additional dimension of haptic information to the user over existing approaches [1-4]. The 3D virtual haptic cone offers the ability to not only provide the user with relevant haptic augmentation pertaining to the task at hand, as do existing approaches, however, to also simultaneously provide an intuitive indication of the current velocities being commanded.

Haptic control methodologies for rover teleoperation in non-deterministic remote environments

Haptic teleoperation allows human operators to interact with a remote mobile robot using their haptic sensory modality. This research introduces new haptic control methodologies allowing the teleoperator to overcome the limitations of existing techniques, ultimately facilitating improved mobile robotic control for the exploration of hazardous and remote environments.