Inverse opal gas sensors : Zn(II)-doped tin dioxide systems for low temperature detection of pollutant gases

Focusing here on the effects of zinc doping in a nanocrystalline matrix of tin dioxide, inverse opal prototype sensors are presented and extensively studied as superior candidates for gas sensing applications. Courtesy of factors including controlled porosity, enhanced surface to volume ratio and homogeneous dispersion of species in the crystalline lattice assured by the sol–gel technique, prototype sensors were prepared with high dopant ratios in a range of new compositions. Exploiting their high sensitivities to low-gas concentrations at low working temperatures, and thanks to the presented templated sol–gel approach, the prepared sensors open up new frontiers in compositional control over the sensing oxide materials, consequently widening the possibilities available in on-demand gas sensor synthesis.

Air-assisted growth of tin dioxide nanoribbons

SnO₂ nanoribbons have been synthesized by annealing of a milled SnO₂ powder, which is able to evaporate efficiently at the temperature as low as 1100 °C due to the metastable structure created by ball milling treatment. When the milled powder was annealed in an assembly of two combustion boats, SnO₂ nanoribbons formed on the surface of the milled powder. The nanoribbons tend to grow along the [101] crystallographic direction and their side surfaces are represented by ±(010) and ±(101) facets. The oxygen plays an important role in enhancing their formation.

Synthesis and characterization of tin dioxide core-shell structure nanowires

In this study, one-dimensional and quasi-one-dimensional tin dioxide nanowires and nan-owalls were fabricated by the use of the chemical vapor deposition technique. It was demonstrated that the growth and nanostructure of tin oxide can be controlled by varying the thickness of gold layer and the partial pressure of vapor at growing sites. Nanowires with a core-shell structure, i.e., pure tin core and tin oxide shell, were synthesized from C-S_nO₂ powders at a mol ratio of C/S_nO₂=3/5 on both silicon and Lanthanum Strontium Co-balt Ferrite ceramic wafers through the vapor-solid mechanism. The conditions that are favorable to the growth of core-shell structure nanowires are investigated.

Inverse opal structure of SnO2 and SnO2 : Zn for gas sensing

In the present work, we propose a low cost synthetic sol-gel route that allows to produce high quality oxide nanostructures with inverse opal architecture which, transferred on alumina substrates provided with Pt interdigitated contacts and heater, are tested as gas sensing devices. An opal template of sintered monodisperse polystyrene spheres was filled with alcoholic solutions of metal oxide precursors and transferred on the alumina substrate. The polystyrene template was removed by thermal treatment, leading to the simultaneous sintering of the oxide nanoparticles. Beside SnO₂, a binary oxide well known for gas sensing application, a Zn containing ternary solid solution (SnO₂:Zn, with Zn 10% molar content) was taken into account for sensor preparation. The obtained high quality macro and meso-porous structures, characterized by different techniques, were tested for pollutant (CO, NO₂) and interfering (methanol) gases, showing that very good detection can be reached through the increase of surface area offered by the inverse opal structure and the tailoring of the chemical composition. The electrical characterization performed on the tin dioxide based sensors shows an enhancement of the relative response towards NO₂ at low temperatures in comparison with conventional SnO₂ sensors obtained with sputtering technique. The addition of Zn increases the separation between the operating temperatures for reducing and oxidizing gases and results in a further enhancement of the selectivity to NO₂ detection.

Supplementing cold plasma with heat enables doping and nano-structuring of metal oxides

Nitrogen doped SnO2 polycrystalline nanostructures were produced from commercial SnO powders in a new system that combines a low-temperature plasma with heating. The method has the potential to improve the initial efficiency and the cycling performance of SnO2 anodes in Li-ion batteries. With this system, the temperature of the SnO to SnO2 conversion was lowered from 430 to 320 °C, up to 5 at% of doped nitrogen was detected and a nano-scale polycrystalline structure was observed in the product. Combining heat and low-pressure plasma is a promising approach for the production and treatment of enhanced energy storage materials.

Epitaxial growth of multi-structure sno2 by chemical vapor deposition

The nanowire and whisker heterostructures of tin dioxide were fabricated by the chemical vapor deposition technique. It was demonstrated that various structures of tin oxide can be obtained by controlling the thickness of gold layer and the partial pressure of source vapor at growing sites. 12.5 and 25 nm thicknesses are preferable for the epitaxial growth of nanowires and heterostructure through vapor-liquid-solid mechanism, respectively. The tin dioxide whiskers with core-shell structure were fabricated by vapor-solid mechanism. Meanwhile, the influences of various factors on the tin dioxide growth are also discussed.

Extending distannoxane double ladders using rigid spacers: a double ladder with eight chiral tin atoms-and a twist!

The new bulky silicon-containing ditin precursor p-(RCl₂SnCH₂SiMe₂)₂C₆H₄ (R = CH₂SiMe₃ (4)) has been synthesized and further reacted to form a unique double ladder {[p-(R(Cl)SnCH₂SiMe₂)₂C₆H₄]O}₄ (6). The two layers within 6 are twisted with respect to one another, resulting in a helical motif and a total absence of molecular symmetry so that there are eight chiral tin atoms within the system. The structure is compared to the double ladder {[m-(R(Cl)SnCH₂CH₂)₂C₆H₄]O}₄ (11), which was prepared from the less sterically demanding ditin precursor m-(RCl₂SnCH₂CH₂)₂C₆H₄ (10). The two layers within 11 are parallel, and the molecule contains only two kinds of tin atom.

Steric control over molecular structure and supramolecular association exerted by tin- and ligand-bound groups in diorganotin carboxylates

Structural data (X-ray and solution and solid-state ^₁₁₉Sn NMR) show that skew-trapezoidal-bipyramidal diorganotin compounds of 2-quinaldate are invariably monomeric, owing to the steric bulk of the carboxylate ligand. In contrast, most of the analogous compounds of 2-picolinate (2-pic) can increase their coordination number by polymerization or the incorporation of solvent in their coordination sphere in the solid state. The exceptional compound is tBu₂Sn(2-pic)₂ (3), for which no increase in coordination number is apparent, a result that is correlated with the bulky tert-butyl groups. Thus, judicious choice of tin or ligand substituents can be exploited to dictate coordination number and/or the degree of supramolecular aggregation in the investigated systems.

Synthesis, molecular structure, and isomerisation in solution of (Me3SbS)2Me2SnCl2. Concomitant hypercoordination of tin and antimony

The reaction of Me₃SbCl₂ and (Me₂SnS)₃ afforded the complex (Me₃SbS)₂Me₂SnCl₂ in high yields, whose molecular structure features both hypercoordinated tin and antimony atoms. In solution, (Me₃SbS)₂Me₂SnCl₂ undergoes a reversible dissociation and ligand interchange reaction to give Me₃SbS, Me₃SbCl₂ and (Me₂SnS)₃.

Photocatalytic degradation of dye effluent by titanium dioxide pillar pellets in aqueous solution

Photocatalytic oxidation (PCO) process is an effective way to deal with organic pollutants in wastewater which could be difficult to be degraded by conventional biological treatment methods. Normally the TiO2 powder in nanometre size range was directly used as photocatalyst for dye degradation in wastewater. However the titanium dioxide powder was arduous to be recovered from the solution after treatment. In this application, a new form of TiO2 (i.e. pillar pellets ranging from 2.5 to 5.3 mm long and with a diameter of 3.7 mm) was used and investigated for photocatalytic degradation of textile dye effluent. A test system was built with a flat plate reactor (FPR) and UV light source (blacklight and solar simulator as light source respectively) for investigating the effectiveness of the new form of TiO2. It was found that the photocatalytic process under this configuration could efficiently remove colours from textile dyeing effluent. Comparing with the TiO2 powder, the pellet was very easy to recovered from the treated solution and can be reused in multiple times without the significant change on the photocatalytic property. The results also showed that to achieve the same photocatalytic performance, the FPR area by pellets was about 91% smaller than required by TiO2 powder. At least TiO2 pellet could be used as an alternative form of photocatalyst in applications for textile effluent treatment process, also other wastewater treatment processes.

Photocatalytic reduction of carbon dioxide

Carbon dioxide reforming happens all the time in nature by photosynthesis of plants. It thus provides a great challenge to equal or surpass this photosynthesis in an artificial system. This paper presents a literature review of using semi-conductor to assist photocatalytic reduction of carbon dioxide under UV irradiation. It analyses some key factors influencing the reaction rates which have been studied worldwide in respective areas. Special interest is taken in recommending possible improvements for the heterogeneous photocatalysis involving gas-solid interfaces, particularly in relation to the influencing factors affecting product concentrations and the reduction rate.

Photocatalytic production of methane and hydrogen through reduction of carbon dioxide with water using titania pellets

This paper presents an experimental study on employing a pellet form of catalyst in photo-reduction of carbon dioxide with water. Water was first absorbed into titania pellets. Highly purified carbon dioxide gas was then discharged into a reactor containing the wet pellets, which were then illuminated continuously for 65 hours using UVC lamps. Analysing the products accumulated in the reactor confirmed that methane and hydrogen were produced through photo-reduction of carbon dioxide with water. No other hydrocarbons were detected. Increasing the temperature in the reactor has showed little change on the amount of methane produced.