The mental health Risk Assessment and Management Process (RAMP) for schools: II. Process evaluation

The Risk Assessment and Management Process (RAMP) is a whole-school process for the assessment and management of student’s mental health and wellbeing in primary and secondary schools. A process evaluation revealed that RAMP was implemented as intended across six primary and three secondary schools in Melbourne, Australia. Using the RAMP risk and protective factors monitoring form and screening processes, each school identified ‘at-risk’ students who had not previously been identified or received assistance from welfare staff at the school. School staff and mental health workers from local agencies reported improvements in their knowledge of risk and protective factors, and their ability to identify at-risk students following RAMP. They also reported satisfaction in outcomes for at-risk students managed within the school using RAMP. All the primary schools and one of the
secondary schools continued to use some RAMP processes in their school up to 6 months after the initial implementation of the program.

Design of electrical infrastructure at container terminal and 'net metering'

Net metering is generally a consumer-based incentive for renewable sources such as wind or solar power systems also referred to as dasiacogenerationdasia. It is still a grey area for container terminals with large electric machines, such as quay cranes, automatic stacking cranes, that can operate in the regenerative mode and export electric energy to the grid. With actual measured electrical data presented for discussion, this paper provides information for the readers to provide a better understanding of their access to net metering, ultilizing their electrical equipment capabilities and be informed for their next negotiation with the power supply company.

Numerical investigation of ramp and constant pressurization system during tube crushing process

The requirement for the automotive industry at present and even more so in the future is to simultaneously develop materials, economic forming processes and techniques for weight reduction of the component. To fulfil this need steel manufacturers have developed Advanced High Strength Steels which have high strength and good formability. Due to high strength, material thickness can be reduced without compromising the function of the component. High pressure hydro forming is one process that can be used to produce complex components from these materials. However, reduction in material thickness of these steels does not result in a large decrease of internal fluid pressure and die closing force during tube hydro forming and hence the higher strengths of these steels will require higher pressures. Tube crushing is a process in which the component can be formed with low pressures. In this paper numerical comparison of ramp and constant pressurization system during tube crushing for a TRIP steel is studied. It is proposed that ramp pressure is the best option to obtain a part with accurate geometrical shape from tube crushing with less die closing force. The stress and thickness distribution of the part during tube crushing were critically analysed.

Low actuation-voltage shift in MEMS switch using ramp dual-pulse

This paper proposes a ramp dual-pulse actuation-voltage waveform that reduces actuation-voltage shift in capacitive microelectromechanical system (MEMS) switches. The proposed waveform as well as two reported waveforms (dual pulse, and novel dual-pulse) are analyzed using equivalent-circuit and equation models. Based on the analysis outcome, the paper provides a clear understanding of trapped charge density in the dielectric. The results show that the proposed actuation-voltage waveform successfully reduces trapped charge and increases lifetime due to lowering of actuation-voltage shift. Using the proposed actuation-voltage waveform, the membrane reaches a steady state on the electrode faster.

Analysing building energy use using sub metering and external weather data

The Intergovernmental Panel on Climate Change and the McKinsey Greenhouse Gas abatement studies have highlighted reduction of building energy consumption as a primary cost-effective element in the abatement of Global Warming. Nevertheless, the energy investigation in most of our existing building stock remains at a novice level at best. Building sub-metering, by which we mean any secondary, hourly, metering (after the main) of various circuits, provides substantial information on when and where energy is used in specific buildings. Furthermore, combining this information with external weather data provides information beyond basic metering results. This paper discusses three case studies and explains how sub-metering, augmented by external solar and temperature data, benefits energy management and identified problems. It explains how different methods of analysing energy usage allowed: justifiable sizing of a solar photovoltaic system, with a calculated Cooling Degree Unit, identified the absence of savings from a proprietary chiller controller, and the energy variation due to user schedules and external conditions indicated anomalies in energy use. The advantages of wireless access are noted. Extracting information in graphical formats suggests better strategies to understand and control energy use.

Characterization and analysis of delamination fracture and nanocreep properties in carbon epoxy composites manufactured by different processes

Delamination resistance and nanocreep properties of 2/2 twill weave carbon epoxy composites manufactured by hot press, autoclave, and Quickstep^TM process are characterized and analyzed. Quickstep is a fluid filled, balanced pressure heated floating mold technology, which is recently developed in Perth, Western Australia for the manufacture of advanced composite components. Mode I and Mode II interlaminar fracture toughness tests, and nanoindentation creep tests on matrix materials show that the fast ramp rate of the Quickstep process provides mechanical properties comparable to that of autoclave at a lower cost for composite manufacturing. Low viscosity during ramping process and good fiber wetting are believed to be the reasons that this process produces composites with high delamination and creep-resistant properties. Nanocreep properties are analyzed using a Kelvin–Voigt model.

Multi-agent based supply chain management with dynamic reconfiguration capability

Supply chain management (SCM) has received increased attention in a globally challenging environment as companies face the necessity to improve customer service and maximize profit. Therefore, dynamic reconfiguration capability is vital for supply chain management to respond to changing customer requirements and operating environments. On the other hand, for its flexible and autonomous characteristics, multi-agent systems are a viable technology for SCM, and have been widely applied in SCM. To this end, dynamic reconfiguration in agent-based SCM systems is proposed from autonomy oriented computing point of view. The performance of agent-based SCM with dynamic reconfiguration is evaluated under a modified TAC SCM scenario. With a dynamic reconfigurable SCM system, new products and processes can be introduced with considerably less expense and ramp-up time.

Effects of variation in modulator temperature during cryogenic modulation in comprehensive two-dimensional gas chromatography

Many modulation systems in comprehensive 2D GC (GC×GC) are based on cryogenic methods. High trapping temperatures in these systems can result in ineffective trapping of the more volatile compounds, whilst temperatures that are too low can prevent efficient remobilisation of some compounds. To better understand the trapping and release of compounds over a wide range of volatilities, we have investigated a number of different constant temperature modulator settings, and have also examined a constant temperature differential between the cryo-trap and the chromatographic oven. These investigations have led us to modify the temperature regulation capabilities of the longitudinally modulated cryogenic system (LMCS). In contrast to the current system, where the user sets a constant temperature for the cooling chamber, the user now sets the temperature difference between the cryo-trap and the chromatographic oven. In this configuration, the cooling chamber temperature increases during the chromatographic run, tracking the oven temperature ramp. This produces more efficient, volatility-dependent modulation, and increases the range of volatile compounds that can be analysed under optimal trap-and-release conditions within a single analytical run. This system also reduces cryogenic fluid consumption.

A critical role for the short intracellular C terminus in receptor activity-modifying protein function

Receptor activity-modifying proteins (RAMPs) interact with and modify the behavior of the calcitonin receptor (CTR) and calcitonin receptor-like receptor (CLR). We have examined the contribution of the short intracellular C terminus, using constructs that delete the last eight amino acids of each RAMP. C-Terminal deletion of individual RAMPs had little effect on the signaling profile induced when complexed with CLR in COS-7 or human embryonic kidney (HEK)293 cells. Likewise, confocal microscopy revealed each of the mutant RAMPs translocated hemagglutinin-tagged CLR to the cell surface. In contrast, a pronounced effect of RAMP C-terminal truncation was seen for RAMP/CTRa complexes, studied in COS-7 cells, with significant attenuation of amylin receptor phenotype induction that was stronger for RAMP1 and -2 than RAMP3. The loss of amylin binding upon C-terminal deletion could be partially recovered with overexpression of Gαs, suggesting an impact of the RAMP C terminus on coupling of G proteins to the receptor complex. In HEK293 cells the c-Myc-RAMP1 C-terminal deletion mutant showed high receptor-independent cell surface expression; however, this construct showed low cell surface expression when expressed alone in COS-7 cells, indicating interaction of RAMPs with other cellular components via the C terminus. This mutant also had reduced cell surface expression when coexpressed with CTR. Thus, this study reveals important functionality of the RAMP C-terminal domain and identifies key differences in the role of the RAMP C terminus for CTR versus CLR-based receptors.

An approach for wind power integration using demand side resources

Renewable energy resources, especially wind power, are expected to provide a considerable portion of the world energy requirements in the near future. Large-scale wind power penetration impacts the electricity industry in many aspects and raises a number of technical challenges for the electricity network. A day-ahead network-constrained market clearing formulation is proposed which considers demand side resources. The proposed approach can provide flexible load profile and reduce the need for ramp up/down services by the conventional generators. This method can potentially facilitate a large penetration of wind power by shifting the wind power generation from the off-peak periods to the high-peak hours. The validity of the proposed approach has been verified using the IEEE 30 bus and 57 bus test systems.

Defining and developing an energy retrofitting approach

This paper identifies the dilemma faced by the stakeholders of existing buildings in regards to a decision making process for energy retrofitting. This paper also identifies the missing stage viewed as the “integrity audit “which can lead to substantial savings in the area of building operation. The methodology is centered on identifying energy waste first, reducing the overall peak electrical demand and then retrofitting for energy-efficiency. A proposed “integrity audit” leads to the classification of three main energy culprits: the identification of waste, missed opportunities, and rescheduling the operation of equipment use. A case study indicating the financial advantages of applying this methodology for a commercial building are presented. The energy retrofitting strategy is divided into two main categories, namely building control improvements and building component implementation. The payback periods are often within months if not immediate.

Modeling intermittent cycling performance in hypoxia using the critical power concept

PURPOSE: This study investigated the efficacy of an intermittent critical power model, termed the "work-balance" (W'BAL) model, during high-intensity exercise in hypoxia. METHODS: Eleven trained, male cyclists (mean ± SD; age 27 ± 6.6 yr, V[Combining Dot Above]O2peak 4.79 ± 0.56 L.min) completed a maximal ramp test and a 3 min "all-out" test to determine critical power (CP) and work performed above CP (W'). On another day an intermittent exercise test to task failure was performed. All procedures were performed in normoxia (NORM) and hypoxia (HYPO; FiO2 ≈ 0.155) in a single-blind, randomized and counter-balanced experimental design. The W'BAL model was used to calculate the minimum W' (W'BALmin) achieved during the intermittent test. W'BALmin in HYPO was also calculated using CP + W' derived in NORM (N+H). RESULTS: In HYPO there was an 18% decrease in V[Combining Dot Above]O2peak (4.79 ± 0.56 vs 3.93 ± 0.47 L.min ; P<0.001) and a 9% decrease in CP (347 ± 45 vs 316 ± 46 W; P<0.001). No significant change for W' occurred (13.4 ± 3.9 vs 13.7 ± 4.9 kJ; P=0.69; NORM vs HYPO). The change in V[Combining Dot Above]O2peak was significantly correlated with the change in CP (r = 0.72; P=0.01). There was no difference between NORM and HYPO for W'BALmin (1.1 ± 0.9 kJ vs 1.2 ± 0.6 kJ). The N+H analysis grossly overestimated W'BALmin (7.8 ± 3.4 kJ) compared with HYPO (P<0.001). CONCLUSION: The W'BAL model produced similar results in hypoxia and normoxia, but only when model parameters were determined under the same environmental conditions as the performance task. Application of the W'BAL model at altitude requires a modification of the model, or that CP and W' are measured at altitude.

Design and simulation of a low-actuation-voltage MEMS switch

This paper presents a low-actuation-voltage micro-electromechanical system (MEMS) capacitive shunt switch which has a very large bandwidth (4 GHz to 24 GHz). In this work, the isolation of MEMS switch is improved by adding two short high impedance transmission lines at the beginning and end of a coplanar waveguide (CPW). Simulating the switch demonstrates that a return loss (S11) is less than -26 dB for the entire frequency band, and perfect matching at 20 GHz in upstate position. A ramp dual pulse driver is also designed for reducing the capacitive charge injection for considering the reliability of the switch. The simulation results show that the shifting of voltage due to the capacitive charge is reduced by more than 35% of the initial value. Finally, the dynamic behavior of the MEMS switch is simulated by modal analysis and using CoventorWare to calculate the natural frequencies of the switch and its mode shapes. The switching ON and OFF time are 4.48 and 2.43 μs, respectively, with an actuation voltage of less than 15 V.