Modeling intermittent cycling performance in hypoxia using the critical power concept

PURPOSE: This study investigated the efficacy of an intermittent critical power model, termed the "work-balance" (W'BAL) model, during high-intensity exercise in hypoxia. METHODS: Eleven trained, male cyclists (mean ± SD; age 27 ± 6.6 yr, V[Combining Dot Above]O2peak 4.79 ± 0.56 L.min) completed a maximal ramp test and a 3 min "all-out" test to determine critical power (CP) and work performed above CP (W'). On another day an intermittent exercise test to task failure was performed. All procedures were performed in normoxia (NORM) and hypoxia (HYPO; FiO2 ≈ 0.155) in a single-blind, randomized and counter-balanced experimental design. The W'BAL model was used to calculate the minimum W' (W'BALmin) achieved during the intermittent test. W'BALmin in HYPO was also calculated using CP + W' derived in NORM (N+H). RESULTS: In HYPO there was an 18% decrease in V[Combining Dot Above]O2peak (4.79 ± 0.56 vs 3.93 ± 0.47 L.min ; P<0.001) and a 9% decrease in CP (347 ± 45 vs 316 ± 46 W; P<0.001). No significant change for W' occurred (13.4 ± 3.9 vs 13.7 ± 4.9 kJ; P=0.69; NORM vs HYPO). The change in V[Combining Dot Above]O2peak was significantly correlated with the change in CP (r = 0.72; P=0.01). There was no difference between NORM and HYPO for W'BALmin (1.1 ± 0.9 kJ vs 1.2 ± 0.6 kJ). The N+H analysis grossly overestimated W'BALmin (7.8 ± 3.4 kJ) compared with HYPO (P<0.001). CONCLUSION: The W'BAL model produced similar results in hypoxia and normoxia, but only when model parameters were determined under the same environmental conditions as the performance task. Application of the W'BAL model at altitude requires a modification of the model, or that CP and W' are measured at altitude.