Residential planning, driver mobility and CO2 emission

The literature on residences and citizens’ transports has focused on either reforming traffic managing in response to residential relocation or post-evaluation of urban planning policies or the evolution of the urban spatial form. In a city there are hotspots that attract the citizens and most of the transportation in the city arises as the citizens’ movement between their residence and the hotspots. Little scholarly attention has been devoted to the possibility to minimize citizens’ transportation in the city by the urban planning of residential areas. In this paper we propose a method to evaluate the environmental impact (in terms of CO2-emissions) of urban plans of residential areas. The method is illustrated in a Swedish case of a midsize city which is presently preoccupied with urban planning of new residential areas in response to substantial population growth due to immigration. The residential plans aims to increase the compactness and residential density in the current center and sub centers leads to less CO2 emissions compare to urban expansion to the edge of the city. The plans of concentrated apartment buildings are more effective in meeting residential needs and mitigating CO2 emissions than dispersed single-family houses.

Real-Time Recognition System for Traffic Signs

The aim of this thesis project is to develop the Traffic Sign Recognition algorithm for real time. Inreal time environment, vehicles move at high speed on roads. For the vehicle intelligent system itbecomes essential to detect, process and recognize the traffic sign which is coming in front ofvehicle with high relative velocity, at the right time, so that the driver would be able to pro-actsimultaneously on instructions given in the Traffic Sign. The system assists drivers about trafficsigns they did not recognize before passing them. With the Traffic Sign Recognition system, thevehicle becomes aware of the traffic environment and reacts according to the situation.The objective of the project is to develop a system which can recognize the traffic signs in real time.The three target parameters are the system’s response time in real-time video streaming, the trafficsign recognition speed in still images and the recognition accuracy. The system consists of threeprocesses; the traffic sign detection, the traffic sign recognition and the traffic sign tracking. Thedetection process uses physical properties of traffic signs based on a priori knowledge to detect roadsigns. It generates the road sign image as the input to the recognition process. The recognitionprocess is implemented using the Pattern Matching algorithm. The system was first tested onstationary images where it showed on average 97% accuracy with the average processing time of0.15 seconds for traffic sign recognition. This procedure was then applied to the real time videostreaming. Finally the tracking of traffic signs was developed using Blob tracking which showed theaverage recognition accuracy to 95% in real time and improved the system’s average response timeto 0.04 seconds. This project has been implemented in C-language using the Open Computer VisionLibrary.

Characters Extraction for Traffic Sign Destination boards in video and still images

Traffic Control Signs or destination boards on roadways offer significant information for drivers. Regulation signs tell something like your speed, turns, etc; Warning signs warn drivers of conditions ahead to help them avoid accidents; Destination signs show distances and directions to various locations; Service signs display location of hospitals, gas and rest areas etc. Because the signs are so important and there is always a certain distance from them to drivers, to let the drivers get information clearly and easily even in bad weather or other situations. The idea is to develop software which can collect useful information from a special camera which is mounted in the front of a moving car to extract the important information and finally show it to the drivers. For example, when a frame contains on a destination drive sign board it will be text something like "Linkoping 50",so the software should extract every character of "Linkoping 50", compare them with the already known character data in the database. if there is extracted character match "k" in the database then output the destination name and show to the driver. In this project C++ will be used to write the code for this software.

Företagsformens betydelse för nyföretagande : En jämförande studie mellan ekonomiska föreningar och aktiebolag

Syftet med denna studie är att undersöka nyföretagares motivgrund för val av företagsform avseende formerna ekonomisk förening och aktiebolag. Syftet är också att söka belysa några av de skillnader i bemötande som finns gentemot företagare vilka bedriver sina verksamheter i formerna ekonomisk förening respektive aktiebolag. Bakgrunden till studien är en rådande uppfattning om att ekonomiska föreningar ibland inte bemöts och behandlas på samma sätt som andra företagsformer vid kontakt med intressenter. Många ekonomiska föreningar är verksamma inom den s.k. sociala ekonomin och då den sociala ekonomin i Sverige är en växande sektor, både vad gäller antal sysselsatta och omsättning, där den sistnämnda uppgår till ca 350 miljarder om året, är ämnet intressant att undersöka.  I studien genomfördes djupintervjuer med företagsrepresentanter från åtta ekonomiska föreningar samt sju aktiebolag samt ett företag med erfarenhet från bådadera. Respondenterna fick bl.a. besvara frågor med avseende på vilka motiv de haft för valet av företagsform, hur de upplevt bemötande från intressenter samt vilka för- och nackdelar de upplever sig ha fått av sitt val.  Från svaren framkommer att flera av de som driver ekonomiska föreningar gör detta för att de känner att det är bra alternativ om man vill driva företag tillsammans samt om man vill ha en, vad de uppfattar, mer demokratisk form för sitt företagande. Formen sågs också som ett hjälpmedel för att skapa delaktighet och ett bättre samarbete. Med formen ekonomisk förening kom även nackdelar som inte upplevdes hos aktiebolagens företrädare. De främsta nackdelar som framkom var att vissa intressenter, t.ex. banker och kreditinstitut bemöter ekonomiska föreningar med skepsis; det finns en osäkerhet kring vad formen medför och innebär. Det framkom även att viktiga intressenter och aktörer har en okunskap om ekonomiska föreningar vilket kan påverka bemötandet negativt. I vissa fall lämnar inte affärssystem och rutiner något utrymme för att hantera ekonomiska föreningar.

Use of Photovoltaic on an E-bike? : A Feasibility Study

In recent years the number of bicycles with e-motors has been increased steadily. Within the pedelec – bikes where an e-motor supports the pedaling – a special group of transportation bikes has developed. These bikes have storage boxes in addition to the basic parts of a bike. Due to the space available on top of those boxes it is possible to install a PV system to generate electricity which could be used to recharge the battery of the pedelec. Such a system would lead to grid independent charging of the battery and to the possibility of an increased range of motor support. The feasibility of such a PV system is investigated for a three wheeled pedelec delivered by the company BABBOE NORDIC.The measured data of the electricity generation of this mobile system is compared to the possible electricity generation of a stationary system.To measure the consumption of the pedelec different tracks are covered, and the energy which is necessary to recharge the bike battery is measured using an energy logger. This recharge energy is used as an indirect measure of the electricity consumption. A PV prototype system is installed on the bike. It is a simple PV stand alone system consisting of PV panel, charge controller with MPP tracker and a solar battery. This system has the task to generate as much electricity as possible. The produced PV current and voltage aremeasured and documented using a data logger. Afterwards the average PV power is calculated. To compare the produced electricity of the on-bike system to that of a stationary system, the irradiance on the latter is measured simultaneously. Due to partial shadings on the on-bike PV panel, which are caused by the driver and some other bike parts, the average power output during riding the bike is very low. It is too low to support the motor directly. In case of a similar installation as the PV prototype system and the intention always to park the bike on a sunny spot an on-bike system could generate electricity to at least partly recharge a bike battery during one day. The stationary PV system using the same PV panel could have produced between 1.25 and 8.1 times as much as the on-bike PV system. Even though the investigation is done for a very specific case it can be concluded that anon-bike PV system, using similar components as in the investigation, is not feasible to recharge the battery of a pedelec in an appropriate manner. The biggest barrier is that partial shadings on the PV panel, which can be hardly avoided during operation and parking, result in a significant reduction of generated electricity. Also the installation of the on-bike PV system would lead to increased weight of the whole bike and the need for space which is reducing the storage capacity. To use solar energy for recharging a bike battery an indirect way is giving better results. In this case a stationary PV stand alone system is used which is located in a sunny spot without shadings and adjusted to use the maximum available solar energy. The battery of the bike is charged using the corresponding charger and an inverter which provides AC power using the captured solar energy.

Integrated Product Development in Truck Industry - A Case Study on Product Development Processes

This paper presents the result from a case study at Scania on product development processes. The objective with the case study was to gather information on Scania’s product development process (PDP) including the use of CAD and simulation tools, and project work. The objective was also to find any deviations or different interpretations among the employees on the PDP. To gather the information, semi-structured tape-recorded interviews have been used to ensure that individual interpretations from the interviewees could be gathered. Scania uses a defined and structured PDP which facilitates concurrent and cross-functional work. The PDP is implemented and followed to various degrees. The newly employed personnel may have difficulties with communication, both to find and to give information. Although, newly graduated personnel may find it easier to adapt to changes, and also to use a structured process which they have studied at universities. It was also known during the case study that the PDP is a major support for the newly employed personnel, which in turn decreases the time to get into the same working process as the more experienced personnel. Employees with decades of experience know the right sources from which to both give and gather information. Also, the terminology and definitions in the product development process may not be used as intended. This makes it difficult for other project members or teams who need to interpret the information received. At the same time, the routines among the more experienced personnel, which have been set-up throughout the years, make them more inflexible in adapting changes. The findings in the case study as well as challenges with implementing the PDP are known to Scania and are a part of the continuing work with improvement.

The Optimal trigger speed of vehicle activated signs

The thesis aims to elaborate on the optimum trigger speed for Vehicle Activated Signs (VAS) and to study the effectiveness of VAS trigger speed on drivers’ behaviour. Vehicle activated signs (VAS) are speed warning signs that are activated by individual vehicle when the driver exceeds a speed threshold. The threshold, which triggers the VAS, is commonly based on a driver speed, and accordingly, is called a trigger speed. At present, the trigger speed activating the VAS is usually set to a constant value and does not consider the fact that an optimal trigger speed might exist. The optimal trigger speed significantly impacts driver behaviour. In order to be able to fulfil the aims of this thesis, systematic vehicle speed data were collected from field experiments that utilized Doppler radar. Further calibration methods for the radar used in the experiment have been developed and evaluated to provide accurate data for the experiment. The calibration method was bidirectional; consisting of data cleaning and data reconstruction. The data cleaning calibration had a superior performance than the calibration based on the reconstructed data. To study the effectiveness of trigger speed on driver behaviour, the collected data were analysed by both descriptive and inferential statistics. Both descriptive and inferential statistics showed that the change in trigger speed had an effect on vehicle mean speed and on vehicle standard deviation of the mean speed. When the trigger speed was set near the speed limit, the standard deviation was high. Therefore, the choice of trigger speed cannot be based solely on the speed limit at the proposed VAS location. The optimal trigger speeds for VAS were not considered in previous studies. As well, the relationship between the trigger value and its consequences under different conditions were not clearly stated. The finding from this thesis is that the optimal trigger speed should be primarily based on lowering the standard deviation rather than lowering the mean speed of vehicles. Furthermore, the optimal trigger speed should be set near the 85th percentile speed, with the goal of lowering the standard deviation.

Factors associated with evidence-based practice among registered nurses in Sweden : a national cross-sectional study

Background: Evidence-based practice (EBP) is emphasized to increase the quality of care and patient safety. EBP is often described as a process consisting of distinct activities including, formulating questions, searching for information, compiling the appraised information, implementing evidence, and evaluating the resulting practice. To increase registered nurses' (RNs') practice of EBP, variables associated with such activities need to be explored. The aim of the study was to examine individual and organizational factors associated with EBP activities among RNs 2 years post graduation. Methods: A cross-sectional design based on a national sample of RNs was used. Data were collected in 2007 from a cohort of RNs, included in the Swedish Longitudinal Analyses of Nursing Education/Employment study. The sample consisted of 1256 RNs (response rate 76%). Of these 987 RNs worked in healthcare at the time of the data collection. Data was self-reported and collected through annual postal surveys. EBP activities were measured using six single items along with instruments measuring individual and work-related variables. Data were analyzed using logistic regression models. Results: Associated factors were identified for all six EBP activities. Capability beliefs regarding EBP was a significant factor for all six activities (OR = 2.6 - 7.3). Working in the care of older people was associated with a high extent of practicing four activities (OR = 1.7 - 2.2). Supportive leadership and high collective efficacy were associated with practicing three activities (OR = 1.4 - 2.0). Conclusions: To be successful in enhancing EBP among newly graduated RNs, strategies need to incorporate both individually and organizationally directed factors.

Den digitala portfolion : Hur väcks uppmärksamhet hos arbetsgivare genom den digitala portfolion

Syftet med denna studie är att undersöka vad som väcker uppmärksamhet hos arbetsgivaren i den digitala portfolion. Studiens fokus är riktad mot nyexaminerade studenter. Den digitala portfolion ersätter successivt den analoga portfolion och som grafisk designer är portfolion en viktig del av identiteten. Idag finns ingen anledning till att inte använda sig av en digital portfolio. Semistrukturerade djupintervjuer utfördes för att undersöka hur kreatören på bästa sätt väcker arbetsgivarens uppmärksamhet genom den digitala portfolion. Studien undersökte även vilken roll lärosätet har när arbetsgivaren granskar portfolion. Resultaten presenteras genom olika teman som t ex alstren ska vara i fokus, unika lösningar och nytänkande väcker uppmärksamhet och vikten av ett bra första intryck. Studien visade att alstren i en digital portfolio ska tala för sig själva och vara relevanta för tiden, ingen överarbetad design ska finnas på portfolion. Likaså är lärosätet mindre viktigt för arbetsgivare, däremot kan högre krav ställas på en portfolio från vissa lärosäten.

Projektet: W7 DALARNA - Ett regionalt resurscentrum för kvinnligt entreprenörskap, jämställdhet och integration

De flesta kvinnor är enmansföretagare och driver en enskild firma, medan männen driver ett aktiebolag. I Dalarna gick det år 2006 2,7 manliga företagare på en kvinnlig, samtidigt som allt fler kvinnorna startar eget företag. I några av de kommuner som deltar i projektet W7 Dalarna har en hög andel kvinnliga företagare bland de företag som startas.Det övergripande syftet för W7 DALARNA formulerades som: ”att bygga upp en stark organisation med lokal närvaro och samordnad verksamhet.” Verksamhetens innehåll skulle inriktas på opinionsbildning, inspiration, utbildning, erfarenhetsutbyte, metodutveckling och att tillvarata synergieffekter inom projektets tre verksamhetsteman. Projektet syftadeockså till att utveckla kompetens- och kvalitetssäkring inom området affärsrådgivningoch att etablera och upprätthålla en lokal fysisk närvaro. Därutöver skulle projektet: ”verka för att Resurscentra för kvinnor skall accepteras som en aktör för lokal och regional utveckling, och fungera som en jämbördig partner i tillväxtarbetet.”

De anställdas outnyttjade kreativitet : En fallstudie på Ica DE Borlänge

Syftet med examensarbetet var att med utgångspunkt i ett konkret exempel, beskriva hur företag kan organisera verksamheten för att ta till vara på de anställdas outnyttjade kreativitet. Materialet i examensarbetet kan mycket väl tillämpas och användas i andra organisationer än den studerade organisationen Ica DE Borlänge. Dock bör beaktande tas till den specifika kontexten som föreligger vid implementeringen av materialet. Med stöd av den teoretiska referensramen visar resultaten av analysen ett behov av en ny organisationsstruktur med tydliga roller och nya belöningssystem. Den studerade organisationen är en lärande organisation där ett medarbetarengagemang söker främjas. Genom en ny organisationsstruktur med tydliga roller ökar detta medarbetarengagemanget och fler genomförda förbättringar genomförs snabbare, vilket bidrar till att de anställdas outnyttjade kreativitet tillvaratas på ett framgångsrikt sätt. De nya belöningssystemen flyttar fokus till medarbetarengagemanget och förbättringsarbetet, vilket främjar ett genomsyrande Lean-tänkande i organisationen. Belöningssystemen skapar även jämnare produktionsflöden som höjer arbetssäkerheten, ökar produktionskvalitén, minimerar stress samt skapar goda förutsättningar för att beräkna personalbemanningen. Kvalitativa metoder har använts för datainsamlingen. Dessa utfördes genom en förstudie och en fallstudie. Fallstudien bestod utav bakgrundsintervjuer, en intervjustudie samt en observation. Det empiriska materialet visar att organisationen arbetar med ett omfattande förbättringsarbete i alla organisatoriska nivåer. Både chefer och medarbetare har viljan och ambitionen att få till ett framgångsrikt förbättringsarbete, men trots flera års arbete med Lean efterfrågas ändå mer tid, bättre organisationsstruktur samt en sambandskoordinatör med specialistkompetens som driver förbättringsarbetet framåt. Empirin ger en viss indikation på att förbättringsverksamheten har anpassats och organiserats till den befintliga organisationsstrukturen. Förbättringsarbetet torde bli mer framgångsrikt om verksamheten anpassas och organiseras utefter de anställdas outnyttjade kreativitet istället. I summering av slutsatsen åskådliggörs två centrala variabler som kan bidra till långsiktiga framgångar i arbetet med att tillvarata de anställdas outnyttjade kreativitet. En ny organisationsstruktur med tydliga roller som fokuserar på förbättringsarbetet samt nya belöningssystem för inlämnade förbättringsförslag, skulle vara av stor betydelse för ett långsiktigt medarbetarengagemang i en framgångsrik organisation.

To what extent are CO2 emissions from intra-urban shopping trips by cars affected by drivers’ travel behaviour and store location?

Transportation is seen as one of the major sources of CO2 pollutants nowadays. The impact of increased transport in retailing should not be underestimated. Most previous studies have focused on transportation and underlying trips, in general, while very few studies have addressed the specific affects that, for instance, intra-city shopping trips generate. Furthermore, most of the existing methods used to estimate emission are based on macro-data designed to generate national or regional inventory projections. There is a lack of studies using micro-data based methods that are able to distinguish between driver behaviour and the locational effects induced by shopping trips, which is an important precondition for energy efficient urban planning. The aim of this study is to implement a micro-data method to estimate and compare CO2 emission induced by intra-urban car travelling to a retail destination of durable goods (DG), and non-durable goods (NDG). We estimate the emissions from aspects of travel behaviour and store location. The study is conducted by means of a case study in the city of Borlänge, where GPS tracking data on intra-urban car travel is collected from 250 households. We find that a behavioural change during a trip towards a CO2 optimal travelling by car has the potential to decrease emission to 36% (DG), and to 25% (NDG) of the emissions induced by car-travelling shopping trips today. There is also a potential of reducing CO2 emissions induced by intra-urban shopping trips due to poor location by 54%, and if the consumer selected the closest of 8 existing stores, the CO2 emissions would be reduced by 37% of the current emission induced by NDG shopping trips.

A modest start, but a steady rise in research use : A longitudinal study of nurses during the first five years in professional life

Background: Newly graduated nurses are faced with a challenging work environment that may impede theirability to provide evidence-based practice. However, little is known about the trajectory of registered nurses’ use ofresearch during the first years of professional life. Thus, the aim of the current study was to prospectively examinethe extent of nurses’ use of research during the first five years after undergraduate education and specifically assesschanges over time.Method: Survey data from a prospective cohort of 1,501 Swedish newly graduated nurses within the nationalLANE study (Longitudinal Analyses of Nursing Education and Entry in Worklife) were used to investigate perceiveduse of research over the first five years as a nurse. The dependent variables consisted of three single itemsassessing instrumental, conceptual, and persuasive research use, where the nurses rated their use on a five-pointscale, from ‘never’ (1) to ‘on almost every shift’ (5). These data were collected annually and analyzed bothdescriptively and by longitudinal growth curve analysis.Results: Instrumental use of research was most frequently reported, closely followed by conceptual use, withpersuasive use occurring to a considerably lower extent. The development over time showed a substantial generalupward trend, which was most apparent for conceptual use, increasing from a mean of 2.6 at year one to 3.6 atyear five (unstandardized slope +0.25). However, the descriptive findings indicated that the increase started onlyafter the second year. Instrumental use had a year one mean of 2.8 and a year five mean of 3.5 (unstandardizedslope +0.19), and persuasive use showed a year one mean of 1.7 and a year five mean of 2.0 (unstandardized slope+0.09).Conclusion: There was a clear trend of increasing research use by nurses during their first five years of practice.The level of the initial ratings also indicated the level of research use in subsequent years. However, it took morethan two years of professional development before this increase ‘kicked in.’ These findings support previousresearch claiming that newly graduated nurses go through a ‘transition shock,’ reducing their ability to useresearch findings in clinical work.

A data driven approach for automating vehicle activated signs

Vehicle activated signs (VAS) display a warning message when drivers exceed a particular threshold. VAS are often installed on local roads to display a warning message depending on the speed of the approaching vehicles. VAS are usually powered by electricity; however, battery and solar powered VAS are also commonplace. This thesis investigated devel-opment of an automatic trigger speed of vehicle activated signs in order to influence driver behaviour, the effect of which has been measured in terms of reduced mean speed and low standard deviation. A comprehen-sive understanding of the effectiveness of the trigger speed of the VAS on driver behaviour was established by systematically collecting data. Specif-ically, data on time of day, speed, length and direction of the vehicle have been collected for the purpose, using Doppler radar installed at the road. A data driven calibration method for the radar used in the experiment has also been developed and evaluated. Results indicate that trigger speed of the VAS had variable effect on driv-ers’ speed at different sites and at different times of the day. It is evident that the optimal trigger speed should be set near the 85th percentile speed, to be able to lower the standard deviation. In the case of battery and solar powered VAS, trigger speeds between the 50th and 85th per-centile offered the best compromise between safety and power consump-tion. Results also indicate that different classes of vehicles report differ-ences in mean speed and standard deviation; on a highway, the mean speed of cars differs slightly from the mean speed of trucks, whereas a significant difference was observed between the classes of vehicles on lo-cal roads. A differential trigger speed was therefore investigated for the sake of completion. A data driven approach using Random forest was found to be appropriate in predicting trigger speeds respective to types of vehicles and traffic conditions. The fact that the predicted trigger speed was found to be consistently around the 85th percentile speed justifies the choice of the automatic model.

Review of the effectiveness of vehicle activated signs

This paper reviews the effectiveness of vehicle activated signs. Vehicle activated signs are being reportedly used in recent years to display dynamic information to road users on an individual basis in order to give a warning or inform about a specific event. Vehicle activated signs are triggered individually by vehicles when a certain criteria is met. An example of such criteria is to trigger a speed limit sign when the driver exceeds a pre-set threshold speed. The preset threshold is usually set to a constant value which is often equal, or relative, to the speed limit on a particular road segment. This review examines in detail the basis for the configuration of the existing sign types in previous studies and explores the relation between the configuration of the sign and their impact on driver behavior and sign efficiency. Most of previous studies showed that these signs have significant impact on driver behavior, traffic safety and traffic efficiency. In most cases the signs deployed have yielded reductions in mean speeds, in speed variation and in longer headways. However most experiments reported within the area were performed with the signs set to a certain static configuration within applicable conditions. Since some of the aforementioned factors are dynamic in nature, it is felt that the configurations of these signs were thus not carefully considered by previous researchers and there is no clear statement in the previous studies describing the relationship between the trigger value and its consequences under different conditions. Bearing in mind that different designs of vehicle activated signs can give a different impact under certain conditions of road, traffic and weather conditions the current work suggests that variable speed thresholds should be considered instead.