Improving CS-4 user data rate in GPRS enabled devices by using a BLER co-processor

The General Packet Radio Service (GPRS) was developed to allow packet data to be transported efficiently over an existing circuit switched radio network. The main applications for GPRS are in transporting IP datagram’s from the user’s mobile Internet browser to and from the Internet, or in telemetry equipment. A simple Error Detection and Correction (EDC) scheme to improve the GPRS Block Error Rate (BLER) performance is presented, particularly for coding scheme 4 (CS-4), however gains in other coding schemes are seen. For every GPRS radio block that is corrected by the EDC scheme, the block does not need to be retransmitted releasing bandwidth in the channel, improving throughput and the user’s application data rate. As GPRS requires intensive processing in the baseband, a viable hardware solution for a GPRS BLER co-processor is discussed that has been currently implemented in a Field Programmable Gate Array (FPGA) and presented in this paper.

Parallel pipelined array architectures for real-time histogram computation in consumer devices

The real-time parallel computation of histograms using an array of pipelined cells is proposed and prototyped in this paper with application to consumer imaging products. The array operates in two modes: histogram computation and histogram reading. The proposed parallel computation method does not use any memory blocks. The resulting histogram bins can be stored into an external memory block in a pipelined fashion for subsequent reading or streaming of the results. The array of cells can be tuned to accommodate the required data path width in a VLSI image processing engine as present in many imaging consumer devices. Synthesis of the architectures presented in this paper in FPGA are shown to compute the real-time histogram of images streamed at over 36 megapixels at 30 frames/s by processing in parallel 1, 2 or 4 pixels per clock cycle.

Preventing carbon contamination of optical devices for X-rays: the effect of oxygen on photon-induced dissociation of CO on platinum

Platinum is one of the most common coatings used to optimize mirror reflectivity in soft X-ray beamlines. Normal operation results in optics contamination by carbon-based molecules present in the residual vacuum of the beamlines. The reflectivity reduction induced by a carbon layer at the mirror surface is a major problem in synchrotron radiation sources. A time-dependent photoelectron spectroscopy study of the chemical reactions which take place at the Pt(111) surface under operating conditions is presented. It is shown that the carbon contamination layer growth can be stopped and reversed by low partial pressures of oxygen for optics operated in intense photon beams at liquidnitrogen temperature. For mirrors operated at room temperature the carbon contamination observed for equivalent partial pressures of CO is reduced and the effects of oxygen are observed on a long time scale.

Homogeneous and heterogeneous distributed classification for pocket data mining

Pocket Data Mining (PDM) describes the full process of analysing data streams in mobile ad hoc distributed environments. Advances in mobile devices like smart phones and tablet computers have made it possible for a wide range of applications to run in such an environment. In this paper, we propose the adoption of data stream classification techniques for PDM. Evident by a thorough experimental study, it has been proved that running heterogeneous/different, or homogeneous/similar data stream classification techniques over vertically partitioned data (data partitioned according to the feature space) results in comparable performance to batch and centralised learning techniques.

Reading is now 'cool': a study of English teachers' perspectives on e-reading devices as a challenge and an opportunity

E-reading devices such as The Kindle have rapidly secured a significant place in a number of societies as at least one major platform for reading. To some extent they are part of the overarching move towards a fully digitised world but they have a distinctiveness in being deliberately “book-like”. Teachers generally have some suspicion towards “New Media”, especially when it challenges their established practice and nothing dominates the school more than the physical book. What may be the challenges but also the benefits of e-readers to teachers and students? What may be the particular challenges to those teachers who are, traditionally, the guardians of the book, that is the teachers of mother tongue literature? This article reports on a survey of English teachers in England to gauge their reactions to e-readers, both personally and professionally and describes their speculations about the place of e-readers in schools in the future. There is a mixed reaction with some teachers concerned about the demise of the book and the potential negative impact on reading. However, the majority welcome e-readers as a dynamic element within the reading environment with particular potential to enthuse reluctant readers and those with special or linguistic needs. They also, some grudgingly, view the fact that reading using this form of technology appeals to the “e-generation” and may succeed in making reading “cool”. This form of technology is, ironically (given that it appears to threaten traditional books) likely to be rapidly adopted in classrooms.

Infotainment across access devices: the perceptual impact of multimedia QoS

The introduction of multimedia on pervasive and mobile communication devices raises a number of perceptual quality issues. However, limited work has been done examining the 3-way interaction between use of equipment, user perceptual quality and quality of service. Our work measures user perceptual quality with the quality of perception (QoP) metrics which comprises levels of informational transfer (objective) and user satisfaction (subjective) when users are presented with multimedia video clips at three different frame rates, using four different display devices. Finally, our results will show that variation in frame-rate does not impact a user’s level of information assimilation (IA), however, does impact a users’ perception of multimedia video ‘quality’.

A conceptual valuation framework (VF) for home telecare system devices

Purpose – The aim of this paper is to present a conceptual valuation framework to allow telecare service stakeholders to assess telecare devices in the home in terms of their social, psychological and practical effects. The framework enables telecare service operators to more effectively engage with the social and psychological issues resulting from telecare technology deployment in the home and to design and develop appropriate responses as a result. Design/methodology/approach – The paper provides a contextual background for the need for sociologically pitched tools that engage with the social and cultural feelings of telecare service users before presenting the valuation framework and how it could be used. Findings – A conceptual valuation framework is presented for potential development/use. Research limitations/implications – The valuation framework has yet to be extensively tested or verified. Practical implications – The valuation framework needs to be tested and deployed by a telecare service operator but the core messages of the paper are valid and interesting for readership. Social implications – In addressing the social and cultural perspectives of telecare service stakeholders, the paper makes a link between the technologies in the home, the feelings and orientations of service users (e.g. residents, emergency services, wardens, etc.) and the telecare service operator. Originality/value – The paper is an original contribution to the field as it details how the sociological orientations of telecare technology service users should be valued and addressed by service operators. It has a value through the conceptual arguments made and through valuation framework presented.

C-slow retimed parallel histogram architectures for consumer imaging devices

A parallel pipelined array of cells suitable for real-time computation of histograms is proposed. The cell architecture builds on previous work obtained via C-slow retiming techniques and can be clocked at 65 percent faster frequency than previous arrays. The new arrays can be exploited for higher throughput particularly when dual data rate sampling techniques are used to operate on single streams of data from image sensors. In this way, the new cell operates on a p-bit data bus which is more convenient for interfacing to camera sensors or to microprocessors in consumer digital cameras.

Enhanced three-factor security protocol for consumer USB mass storage devices

The Universal Serial Bus (USB) is an extremely popular interface standard for computer peripheral connections and is widely used in consumer Mass Storage Devices (MSDs). While current consumer USB MSDs provide relatively high transmission speed and are convenient to carry, the use of USB MSDs has been prohibited in many commercial and everyday environments primarily due to security concerns. Security protocols have been previously proposed and a recent approach for the USB MSDs is to utilize multi-factor authentication. This paper proposes significant enhancements to the three-factor control protocol that now makes it secure under many types of attacks including the password guessing attack, the denial-of-service attack, and the replay attack. The proposed solution is presented with a rigorous security analysis and practical computational cost analysis to demonstrate the usefulness of this new security protocol for consumer USB MSDs.