A Triple-mode Sigma-delta Modulator Design for Wireless Standards

This work presents a triple-mode sigma-delta modulator for three wireless standards namely GSM/WCDMA and Bluetooth. A reconfigurable ADC has been used to meet the wide bandwidth and high dynamic range requirements of the multi-standard receivers with less power consumption. A highly linear sigma-delta ADC which has reduced sensitivity to circuit imperfections has been chosen in our design. This is particularly suitable for wide band applications where the oversampling ratio is low. Simulation results indicate that the modulator achieves a peak SNDR of 84/68/68 dB over a bandwidth of 0.2/3.84/1.5 MHz with an oversampling ratio 128/8/8 in GSM/WCDMA/Bluetooth modes respectively

A Triple-Mode Feed-Forward Sigma-Delta Modulator Design For Gsm / Wcdma / Wlan Applications

This paper presents a cascaded 2-2-2 reconfigurable sigma-delta modulator that can handle GSM, WCDMA and WLAN standards. The modulator makes use of a low-distortion swing suppression topology which is highly suitable for wide band applications. In GSM mode, only the first stage (2nd order Σ-Δ ADC) is turned on to achieve 88dB dynamic range with oversampling ratio of 160 for a bandwidth of 200KHz; in WCDMA mode a 2-2 cascaded structure (4th order) is turned on with 1-bit in the first stage and 2-bit in the second stage to achieve 74 dB dynamic range with oversampling ratio of 16 for a bandwidth of 2MHz and a 2-2-2 cascaded MASH architecture with a 4-bit in the last stage to achieve a dynamic range of 58dB for a bandwidth of 20MHz. The novelty lies in the fact that unused blocks of second and third stages can be switched off taking into considerations like power consumption. The modulator is designed in TSMC 0.18um CMOS technology and operates at 1.8 supply voltage.

Antimedian graphs

Antimedian graphs are introduced as the graphs in which for every triple of vertices there exists a unique vertex x that maximizes the sum of the distances from x to the vertices of the triple. The Cartesian product of graphs is antimedian if and only if its factors are antimedian. It is proved that multiplying a non-antimedian vertex in an antimedian graph yields a larger antimedian graph. Thin even belts are introduced and proved to be antimedian. A characterization of antimedian trees is given that leads to a linear recognition algorithm.

Fine structure in the time of flight distribution of C2 in laser produced plasma from graphite

Time resolved optical emission spectroscopy is employed to study the expansion dynamics of C2 species in a graphite plasma produced during the Nd : YAG ablation. At low laser fluences a single peak distribution with low kinetic energy is observed. At higher fluences a twin peak distribution is found. It has been noted that these double peak time of flight distribution splits into a triple peak structure at distances >_ 17mm from the target surface. The reason for the occurrence of multiple peak is due to different formation mechanisms of C2 species

Emission characteristics and dynamics of C2 from laser produced graphite plasma

The emission features of laser ablated graphite plume generated in a helium ambient atmosphere have been investigated with time and space resolved plasma diagnostic technique. Time resolved optical emission spectroscopy is employed to reveal the velocity distribution of different species ejected during ablation. At lower values of laser fluences only a slowly propagating component of C2 is seen. At high fluences emission from C2 shows a twin peak distribution in time. The formation of an emission peak with diminished time delay giving an energetic peak at higher laser fluences is attributed to many body recombination. It is also observed that these double peaks get modified into triple peak time of flight distribution at distances greater than 16 mm from the target. The occurrence of multiple peaks in the C2 emission is mainly due to the delays caused from the different formation mechanism of C2 species. The velocity distribution of the faster peak exhibits an oscillating character with distance from the target surface.

International Initiatives for Regulating Access to Genetic Resources

In light of the various international instruments and international agencies that are actively engaged in resolving the issue of ABS, the present work tries to find an answer to the larger question how far the above agencies have succeeded in regulating access and make sure of benefit sharing. In this process, the work comprehensively analyses the work of different agencies involved in the process. It tries to find out the major obstacles that stand in the way of fulfilment of the benefit sharing objective and proposes the ways and means to tackle them. The study first traces the legal foundations of the concept of property in GRs and associated TK.For this, it starts with analysis of the nature of property and the questions related to ownership in GRs as contained in the CBD as well as in various State legislations. It further examines the notion of property before and after the enactment of the CBD and establishes that the CBD contains strong private property jurisprudence.Based on the theoretical foundation of private property right,Chapter 3 analyses the benefit sharing mechanism of the CBD, i.e. the Nagoya Protocol. It searches for a theoretical convergence of the notion of property as reflected in the two instruments and successfully establishes the same. It makes an appraisal of the Nagoya regime to find out how far it has gone beyond the CBD in ensuring the task of benefit sharing and the impediments in its way.Realizing that the ITPGRFA forms part of the CBD system, Chapter 4 analyses the benefit sharing structure of ITPGRFA as revealed through its multilateral system. This gives the work the benefit of comparing two different benefit sharing models operating on the same philosophy of property. This chapter tries to find out whether there is conceptual coherence in the notion of property when the benefit sharing model changes. It alsocompares the merits and demerits of both the systems and tries to locate the hurdles in achieving benefit sharing. Aware of the legal impediments caused by IPRs in the process of ABS, Chapter 5 tries to explore the linkages between IPRs and GRs and associated TK and assesses why contract-based CBD system fails before the monopoly rights under TRIPS. Chapter 6 analyses the different solutions suggested by the international community at the TRIPS Council as well as the WIPO (World Intellectual property Organisation) and examines their effectiveness. Chapter 7 concludes that considering the inability of the present IP system to understand the grass root realities of the indigenous communities as well as the varying situations of the country of origin, the best possible way to recognise the CBD goals in the TRIPS could be better achieved through linking the two instruments by means of the triple disclosure requirement in Article 29 as suggested by the Disclosure Group during the TRIPS Council deliberations. It also recommends that considering the nature of property in GR, a new section/chapter in the TRIPS dealing with GRs would be another workable solution.

Export, Import and Inter—State Sales - A Study in Tax Law

This thesis is a study in sales tax law, a study on the triple concept of export, import and inters—State sales. It is in seventeen chapters spread in five parts. The introductory is an overview. It presents the thematic thrust of what follows. Part two deals with incidence of sales tax on export and import and the scope of exemption. Part three focuses attention on the various dimensions of the problem of inter—State sale. Part four is an inquiry into parliamentary control on taxes over sales and purchases and highlights inter—State and intra-State implications of discriminatory tax. Part five contains the results of empirical study and the general conclusions of the thesis. In the past no attempt has been made to analyse on identical lines the problems dealt with in this thesis

Qualitative air flow modelling and analysis of data centre air conditioning as multiple jet array

This work identifies the importance of plenum pressure on the performance of the data centre. The present methodology followed in the industry considers the pressure drop across the tile as a dependant variable, but it is shown in this work that this is the only one independent variable that is responsible for the entire flow dynamics in the data centre, and any design or assessment procedure must consider the pressure difference across the tile as the primary independent variable. This concept is further explained by the studies on the effect of dampers on the flow characteristics. The dampers have found to introduce an additional pressure drop there by reducing the effective pressure drop across the tile. The effect of damper is to change the flow both in quantitative and qualitative aspects. But the effect of damper on the flow in the quantitative aspect is only considered while using the damper as an aid for capacity control. Results from the present study suggest that the use of dampers must be avoided in data centre and well designed tiles which give required flow rates must be used in the appropriate locations. In the present study the effect of hot air recirculation is studied with suitable assumptions. It identifies that, the pressure drop across the tile is a dominant parameter which governs the recirculation. The rack suction pressure of the hardware along with the pressure drop across the tile determines the point of recirculation in the cold aisle. The positioning of hardware in the racks play an important role in controlling the recirculation point. The present study is thus helpful in the design of data centre air flow, based on the theory of jets. The air flow can be modelled both quantitatively and qualitatively based on the results.

“Qualitative Air Flow Modelling And Analysis Of Data Centre Air Conditioning As Multiple Jet Array

In the present study the effect of hot air recirculation is studied with suitable assumptions. It identifies that, the pressure drop across the tile is a dominant parameter which governs the recirculation. The rack suction pressure of the hardware along with the pressure drop across the tile determines the point of recirculation in the cold aisle. The positioning of hardware in the racks play an important role in controlling the recirculation point. The present study is thus helpful in the design of data centre air flow, based on the theory of jets. The air flow can be modelled both quantitatively and qualitatively based on the results

"A Study Of The Performance Of The "Jeevan Saathi" And "Jeevan Mitra” Policies Offered By The L.I.C."

The main benefit of Jeevan Saathi policy is that, it is a joint life policy which covers the life of both husband and wife under a single policy. And they also get double benefit if any one of them dies during the term of the policy. The Jeevan Mitra policy is a single life policy, the main advantage of which is that the dependents get double benefit in case of normal death and triple benefit in case of accidental death during the term of policy. so both the policies have their own attractions but when compared with the annual sales of other policies, the additional increase in the sales of these policies are decreasing. It is a fact finding study concerned with market performance of these two policies by conducting a survey among the Jeevan Saathi and Jeevan Mitra policy holders, and a thorough analysis of the various information or data collected from them. This study is an attempt to present an integrated picture of the main features of the policy holders who have bought these policies, the major factors responsible for making them purchase these policies, the various difficulties faced by them at present and further modification needed in the plans of these policies according to the opinion of policy holders. For increasing accuracy of the conclusions, information is also collected from Agents and Development Officers by using interview schedule. The main purpose of this study is to draw attention of LIC to introduce new plans of policies taking into consideration the drawbacks or defects of the existing policies and present needs of policy holders. It will also help to make new plans in order to suit the needs of more people who want to buy life insurance policies

A Multi-Mode Sigma-Delta ADC for GSM/WCDMA/ WLAN Applications

The demand for new telecommunication services requiring higher capacities, data rates and different operating modes have motivated the development of new generation multi-standard wireless transceivers. In multistandard design, sigma-delta based ADC is one of the most popular choices. To this end, in this paper we present cascaded 2-2-2 reconfigurable sigma-delta modulator that can handle GSM, WCDMA and WLAN standards. The modulator makes use of a low-distortion swing suppression topology which is highly suitable for wide band applications. In GSM mode, only the first stage (2nd order Σ-Δ ADC) is used to achieve a peak SNDR of 88dB with oversampling ratio of 160 for a bandwidth of 200KHz and for WCDMA mode a 2-2 cascaded structure (4th order) is turned on with 1-bit in the first stage and 2-bit in the second stage to achieve 74 dB peak SNDR with over-sampling ratio of 16 for a bandwidth of 2MHz. Finally, a 2-2-2 cascaded MASH architecture with 4-bit in the last stage is proposed to achieve a peak SNDR of 58dB for WLAN for a bandwidth of 20MHz. The novelty lies in the fact that unused blocks of second and third stages can be made inactive to achieve low power consumption. The modulator is designed in TSMC 0.18um CMOS technology and operates at 1.8 supply voltage