The accumulation of financial and social capital as a means to achieve a sustained competitive advantage for consumer co-operatives

By so far, scholars have discussed how the characteristics of consumer co-operatives (cooperative principles, values and the dual role of members as the users and owners) can potentially give them a competitive advantage over investor-owned firms (IOFs). In addition, concern for the community (as partly derived from locality and regionality) has been seen as a potential source of success for consumer co-operatives. On the other hand, the geographicbound purpose of consumer co-operation causes that consumer co-operative can be regarded as a challenging company form to manage. This is because, according to the purpose of consumer co-operation, co-operatives are obligated to 1) provide the owners with services and goods that are needed and do so at more affordable prices than their competitors do and/or 2) to operate in areas in which competitors do not want to operate (for example, because of the low profitability in certain area of business or region). Thus, consumer co-operatives have to operate very efficiently in order to execute this geographic-bound corporate purpose (e.g. they cannot withdraw from the competition during the declining stages of business). However, this efficiency cannot be achieved by any means; as the acceptance from the important regional stakeholders is the basic operational precondition and lifeline in the long run. Thereby, the central question for the survival and success of consumer co-operatives is; how should the consumer co-operatives execute its corporate purpose so it can be the best alternative to its members in the long run? This question has remained unanswered and lack empirical evidence in the previous studies on the strategic management of consumer cooperation. In more detail, scholars have not yet empirically investigated the question: How can consumer co-operatives use financial and social capital to achieve a sustained competitive advantage? It is this research gap that this doctoral dissertation aims to fulfil. This doctoral dissertation aims to answer the above questions by combining and utilizing interview data from S Group co-operatives and the central organizations in S Group´s network (overall, 33 interviews were gathered), archival material and 56 published media articles/reports. The study is based on a qualitative case study approach that is aimed at theory development, not theory verification (as the theory is considered as nascent in this field of study). Firstly, the findings of this study indicate that consumer co-operatives accumulate financial capital; 1) by making profit (to invest and grow) and 2) by utilizing a network-based organizational structure (local supply chain economies). As a result of financial capital accumulation, consumer co-operatives are able to achieve efficiency gains but also remain local. In addition, a strong financial capital base increases consumer co-operatives´ independence, competitiveness and their ability to participate in regional development (which is in accordance with their geographically bound corporate purpose). Secondly, consumer cooperatives accumulate social capital through informal networking (with important regional stakeholders), corporate social responsibility (CSR) behaviour and CSR reporting, pursuing common good, and interacting and identity sharing. As a result of social capital accumulation, consumer co-operatives are able to obtain the resources for managing; 1) institutional dependencies and 2) customer relations. By accumulating both social and financial capital through the above presented actions, consumer co-operatives are able to achieve sustained competitive advantage. Finally, this thesis provides useful ideas and new knowledge for cooperative managers concerning why and how consumer co-operatives should accumulate financial and social capital (to achieve sustained competitive advantage), while aligning with their corporate purpose.

Keskeneräisen tuotannon hallinta sähkönjakeluverkon urakointiprojekteissa

The main objective of the study was to find new approaches to the management of work in process in a rapidly changing power distribution network contracting environment in order to improve the efficiency of the management of capital and workload. The study describes the operating environment of a power distribution network contractor based in Eastern Finland and combines various activity indicators to create a general view. The literature review discusses scientific articles on project production, work in process and working capital management, analytical tools for projects as well as Lean criteria. The analysis of two case studies dealing with the characteristics of the power distribution network restructuring, focuses on how production management and management of work in process can potentially be improved in power distribution network contracting environments. The main results are the summary of the key figures of production, the data concerning the significance of different project types for work in process as well as the ways of improving the efficiency of production and business development in the present context.

Warranty Practices and Costs in the Industry of Welding Machines Manufacturing

The objective of the master’s thesis is to define the warranty practices and costs in the welding machines manufacturing company and do a proposal for a warranty policy based on the practices and costs. The study include a disquisition of the warranty practices in the subsidiaries and distributor sales. The disquisition of the warranty practices introduces the information relates to warranty period, warranty costs, including repair, spare part and other costs, the practices with the replaced parts, the utilization rate of the eWarranty system and information relates to special arrangements in the warranties. The warranty costs are defined besides the group level also separately per regions and product families. From some product families the disquisition is done per products. In this study is also done a proposal for a warranty policy for the company. The proposal speaks out the length of warranty period, the compensation of the warranty costs, the practices with replaced parts and usage of eWarranty system.

Berry polyphenol absorption and the effect of northern berries on metabolism, ectopic fat accumulation, and associated diseases

The prevalence of obesity and type 2 diabetes has increased at an alarming rate in developed countries. It seems in the light of current knowledge that metabolic syndrome may not develop at all without NAFLD, and NAFLD is estimated to be as common as metabolic syndrome in western population (23 % occurrence). Fat in the liver is called ectopic fat, which is triacylglycerols within the cells of non-adipose tissue. Serum alanine aminotransferase (ALT) values correlate positively with liver fat proportions, and increased activity of ALT predicts type 2 diabetes independently from obesity. Berries, high in natural bioactive compounds, have indicated the potential to reduce the risk of obesity-related diseases. Ectopic fat induces common endocrine excretion of adipose tissue resulting in the overproduction of inflammatory markers, which further induce insulin resistance by multiple mechanisms. Insulin resistance inducing hyperinsulinemia and lipolysis in adipocytes increases the concentration of free fatty acids and consequently causes further fat accumulation in hepatocytes. Polyphenolic fractions of berries have been shown to reverse inflammatory reaction cascades in in vitro and animal studies, and moreover to decrease ectopic fat accumulation. The aim of this thesis was to explore the role of northern berries in obesity-related diseases. The absorption and metabolism of selected berry polyphenols, flavonol glycosides and anthocyanins, was investigated in humans, and metabolites of the studied compounds were identified in plasma and urine samples (I, II). Further, the effects of berries on the risk factors of metabolic syndrome were studied in clinical intervention trials (III, IV), and the different fractions of sea buckthorn berry were tested for their ability to reduce postprandial glycemia and insulinemia after high-glucose meal in a postprandial study with humans (V). The marked impact of mixed berries on plasma ALT values (III), as well as indications of the positive effects of sea buckthorn, its fractions and bilberry on omental adiposity and adhesion molecules (IV) were observed. In study V, sea buckthorn and its polyphenol fractions had a promising effect on potprandial metabolism after high-glucose meal. In the literature review, the possible mechanisms behind the observed effects have been discussed with a special emphasis on ectopic fat accumulation. The literature review indicated that especially tannins and flavonoids have shown potential in suppressing diverse reaction cascades related to systemic inflammation, ectopic fat accumulation and insulin resistance development.

Computational and Experimental Analysis of Flow Field in the Diffusers of Centrifugal Compressors

Centrifugal compressors are widely used for example in process industry, oil and gas industry, in small gas turbines and turbochargers. In order to achieve lower consumption of energy and operation costs the efficiency of the compressor needs to be improve. In the present work different pinches and low solidity vaned diffusers were utilized in order to improve the efficiency of a medium size centrifugal compressor. In this study, pinch means the decrement of the diffuser flow passage height. First different geometries were analyzed using computational fluid dynamics. The flow solver Finflo was used to solve the flow field. Finflo is a Navier-Stokes solver. The solver is capable to solve compressible, incompressible, steady and unsteady flow fields. Chien's k-e turbulence model was used. One of the numerically investigated pinched diffuser and one low solidity vaned diffuser were studied experimentally. The overall performance of the compressor and the static pressure distribution before and after the diffuser were measured. The flow entering and leaving the diffuser was measured using a three-hole Cobra-probe and Kiel-probes. The pinch and the low solidity vaned diffuser increased the efficiency of the compressor. Highest isentropic efficiency increment obtained was 3\% of the design isentropic efficiency of the original geometry. It was noticed in the numerical results that the pinch made to the hub and the shroud wall was most beneficial to the operation of the compressor. Also the pinch made to the hub was better than the pinchmade to the shroud. The pinch did not affect the operation range of the compressor, but the low solidity vaned diffuser slightly decreased the operation range.The unsteady phenomena in the vaneless diffuser were studied experimentally andnumerically. The unsteady static pressure was measured at the diffuser inlet and outlet, and time-accurate numerical simulation was conducted. The unsteady static pressure showed that most of the pressure variations lay at the passing frequency of every second blade. The pressure variations did not vanish in the diffuser and were visible at the diffuser outlet. However, the amplitude of the pressure variations decreased in the diffuser. The time-accurate calculations showed quite a good agreement with the measured data. Agreement was very good at the design operation point, even though the computational grid was not dense enough inthe volute and in the exit cone. The time-accurate calculation over-predicted the amplitude of the pressure variations at high flow.

The Role of Third-Party Service Provider in B2B Integration

Sähköisen kaupankäynnin kasvun myötä, itsenäisten yritysten tietojärjestelmien integraation tarve on moninkertaistunut viime vuosien aikana. Yritykset ovat huomanneet, että tilaus-toimitusketjun automatisointiin tähtäävällä kokonaisvaltaisella integraatio-ratkaisulla on mahdollista päästä kattaviin kustannussäästöihin sekä tulojen kasvuun. Pääsääntöisesti yritykset kuitenkin etenevät hitaammin, integroimalla aluksi pienempiä liiketoiminnan tietojärjestelmien toimintoja. Positiivisten kokemusten perusteella yritykset ovat valmiitalaajentamaan sähköisen kaupankäynnin automatisointia myös muissa toiminnoissa. Tässä työssä keskitytään tarkastelemaan eri lähestymistapojayritystenvälisen integraation toteuttamiseen, sekä analysoimaan eri keinojen liiketoiminnallisia ja teknisiä vaikutuksia. Työ on tehty yhteistyössä UPM-KymmeneWood Oy:n kanssa, jonka tavoitteena oli saada perusteelliset tiedot yrityksenvälisestä integraatiosta ja syventää tietoja sekä integraatio-palveluita tarjoavien kolmansien osapuolten toimintatavoista että heidän tarjoamista palveluista ja niiden käyttökelpoisuudesta puutuoteteollisuudessa toimivassa yrityksessä. Käytännön osuudessa on tarkemmin esitelty integraatio-palveluita tarjoavien operaattoreiden kanssa käytyjen palaverien sekä heidän toimittamien materiaalien perusteella tehdyn tutkimustyön tuloksia, sisältäen yksityiskohtaiset kuvaukset yritystenvälisen integraation mahdollistavista palveluista.

Determinants of the price of allowance in the European Union emissions trading market

Teorian mukaan täydellisen kilpailun päästöoikeuskauppamarkkinoilla päästöoikeuden hinta muodostuu markkinoilla vallitsevan päästöjen vähentämisen rajakustannuksen perusteella. Euroopan päästökauppamarkkinoilla päästöjen vähentämisen kustannuksia nostavat suhteellisen lyhyet päästökauppajaksot ja epävarmuus järjestelmän jatkuvuudesta. Toisaalta päästökaupan osallistujien yhteenlaskettu päästöjen vähentämisen tarve lienee suhteellisen vähäinen ellei olematon ensimmäisellä päästökauppajaksolla. Euroopan päästökauppamarkkinoilla päästöjen vähentämisen tarve ja päästöjenvähentämisen kustannukset ovat osittain riippuvaisia muuttuvista tekijöistä. Päästöoikeuden hintaan voivat vaikuttaa päästökauppajakson aikana tapahtuva teollisuuden suhdannevaihtelu, polttoaineiden hintojen heilahtelut sekä säätilojen vaihtelu. Päästökaupan ensimmäisinä kuukausina päästöoikeuden hintakehityksellä on ollut yhteyksiä tekijöihin, joiden muutosten tulisikin vaikuttaa päästökauppamarkkinoiden tasapainoon. Näitä tekijöitä ovat esimerkiksi polttoainemarkkinoiden ja sähkömarkkinoiden hintakehitys sekä vaihtelut säätiloissa.

Distribution systems of the food sector in Russia: the perspective of Finnish food industry

Finnish food producers' trade with Russia has experienced profound changes since the collapse of the Soviet Union. Simultaneously, the distribution systems of foodstuffs have changed remarkably. This study sheds some light into these changes and analyses the current situation in distribution systems of foodstuffs in Russia. In addition, the study discusses the possibilities of Finnish food producers to get more of their products to the shelves of Russian food retail stores. Before the 1998 financial crisis, the import of foreign foodstuffs was booming in Russia due to the overvalued rouble. As a result of the financial crisis, food import collapsed. The export of Finnish foodstuffs to Russia has been slowly recovering during the past few years, but in the most important product categories the pre-crisis levels have so far not been reached and maybe will not be reached. In certain product categories the growth has been only marginal. It seems that starting localproduction will become increasingly important in the future. This is further encouraged by the fact that Russian consumers favour domestic food products. Russian consumers are very price conscious and demand quality in food products. The perceived price-quality ratio is an important criterion in the purchase decision.The majority of foodstuff retail is still conducted via unorganised forms of trade (e.g. kiosks and marketplaces) but modern retail chains are developing at a fast pace in Russia. They are also expected to dominate the retail trade in foodstuffs over the unorganised forms of trade in the future. This will change the distribution systems as well. The retail chains are trying to shorten the distribution chain, similarly to what has been seen in the Western countries. This together with the strengthening of retail chains is likely to shrink the role of wholesalers, as the chains increasingly want to work directly with the producers. Many large retail chains are acquiring or have already acquired a distribution centre or centres in order to boost efficiency and control the flow of products. The strengthening of the retail chains also gives them power in negotiations, which the producers and distributors have to adjust to. For example store entry fees and retail chains' own private label products pose challenges to the food producers. In the food production sector the competition is fierce, as large Russianand foreign producers want to ensure their piece of the market. The largest producers utilise their size: they invest in big marketing campaigns and are willing to pay high entry fees to retail chains in order to secure a place on the store shelves and to build a strong brand in Russia. This complicates the situation from the viewpoint of small producers. Currently, the most popular type of distribution system among the interviewed Finnish food producers is based on a network of local distributors. There is, however, a strong consensus on the importanceof starting local production in order to be a serious actor in Russia in the future. Factors that hinder the starting of local production include the lack of local infrastructure and qualified staff, and the low risk tolerance of Finnish firms. Major barriers for entry in Russia are the actions of authorities, fierce competition, fragmented market and Finnish producers' heavy production costs. The suggested strategies for increasing the market share include focusing geographically or segment-wise, introducing new products, starting local production, andcooperation between Finnish producers. Smallness was one reason why Finnish producers had to cut down their operations in Russia due to the 1998 crisis. Smaller producers had fewer resources to tolerate losses during the period of crisis. Smallness is reflected also on trade negotiations with retail chains and distributors. It makes it harder to cope with the store entry fees and to differentiatefrom the mass of products propped up by expensive advertising. Finally, it makes it harder for Finnish producers to start or expand local production, as it is more difficult for a small producer to get financing and to tolerate the increased risks. Compensating for the smallness might become the crucial factor determining the future success of Finnish food producers in the Russian market.

The effects of productivity on profitability: a case study at firm level using an activity-based costing approach

Productivity and profitability are important concepts and measures describing the performance and success of a firm. We know that increase in productivity decreases the costs per unit produced and leads to better profitability. This common knowledge is not, however, enough in the modern business environment. Productivity improvement is one means among others for increasing the profitability of actions. There are many means to increase productivity. The use of these means presupposes operative decisions and these decisions presuppose informationabout the effects of these means. Productivity improvement actions are in general made at floor level with machines, cells, activities and human beings. Profitability is most meaningful at the level of the whole firm. It has been very difficult or even impossible to analyze closely enough the economical aspects of thechanges at floor level with the traditional costing systems. New ideas in accounting have only recently brought in elements which make it possible to considerthese phenomena where they actually happen. The aim of this study is to supportthe selection of objects to productivity improvement, and to develop a method to analyze the effects of the productivity change in an activity on the profitability of a firm. A framework for systemizing the economical management of productivity improvement is developed in this study. This framework is a systematical way with two stages to analyze the effects of productivity improvement actions inan activity on the profitability of a firm. At the first stage of the framework, a simple selection method which is based on the worth, possibility and the necessity of the improvement actions in each activity is presented. This method is called Urgency Analysis. In the second stage it is analyzed how much a certain change of productivity in an activity affects the profitability of a firm. A theoretical calculation model with which it is possible to analyze the effects of a productivity improvement in monetary values is presented. On the basis of this theoretical model a tool is made for the analysis at the firm level. The usefulness of this framework was empirically tested with the data of the profit center of one medium size Finnish firm which operates in metal industry. It is expressedthat the framework provides valuable information about the economical effects of productivity improvement for supporting the management in their decision making.

Wireless e-Business Applications - Methods for Forecasting the Demand of Wireless Services and Technologies

Tämä tutkimus oli osa sähköistä liiketoimintaa ja langattomia sovelluksia tutkivaa projektia ja tutkimuksen tavoitteena oli selvittää ennustamisen rooli päätöksenteko- ja suunnitteluprosessissa ja määrittää parhaiten soveltuvat ja useimmin käytetyt teknologian ennustusmenetelmät. Ennustusmenetelmiä tarkasteltiin erityisesti uuden teknologian ja pitkän aikavälin ennustamisen näkökulmasta. Tutkimus perustui teknologista ennustamista, pitkän aikavälin suunnittelua ja innovaatioprosesseja käsittelevän kirjallisuuden analysointiin. Materiaalin perusteella kuvataan teknologian ennustamista informaation hankkimisvälineenä organisaatioiden suunnitteluprosessin apuna. Työssä arvioidaan myös seuraavat teknologisen ennustamisen menetelmät: trendianalyysi-, Delfoi-, cross-impact analyysi-, morfologinen analyysi- ja skenaario analyysimenetelmä. Työ tuo esille jokaisen ennustusmenetelmä ominaispiirteet, rajoitukset ja sovellusmahdollisuudet. Käyttäen esiteltyjä menetelmiä, saadaan kerättyä hyödyllistä informaatiota tulevaisuuden näkymistä, joita sitten voidaan käyttää hyväksi organisaatioiden suunnitteluprosesseissa.

The development of an information infrastructure for cost estimating in the automotive industry

Työn tavoitteena on luoda yleinen informaatioinfrastruktuuri autoteollisuuden valmistuskustannusten arviointiin. Nykyään tämä kustannusarviointi on laajassa käytössä oleva menetelmä. Se mahdollistaa tuotekustannusten hallitsemisen, mikä lisää autovalmistajien kilpailukykyä. Kustannusarvioinnissa tarvitaan laadukasta tietoa, mutta suoritetussa tutkimuksessa paljastui, että useat seikat haittaavat tätä arviointia. Erityisesti resurssien vähyys, tiedonhankinta ja tiedon luotettavuuden varmentaminen aiheuttavat ongelmia. Nämä seikat ovat johtaneet kokemusperäisen asiantuntemuksen laajaan käyttöön, minkä johdosta erityisesti kokemattomilla kustannusarvioijilla on vaikeuksia ymmärtää kustannusarvioiden tietovaatimuksia. Tämän johdosta tutkimus tuo esiin kokeneiden kustannusarvioijien käyttämiä tietoja ja tietolähteitä päämääränä lisätä kustannusarvioiden ymmärtämistä. Informaatioinfrastruktuuri, joka sisältää tarvittavan tiedon järkevien ja luotettavien kustannusarvioiden luontiin, perustuu tutkimuksen tuloksiin. Infrastruktuuri määrittelee tarvittavan kustannustiedon ja niiden mahdolliset tietolähteet. Lisäksi se selvittää miksi tieto on tarpeellista ja miten tiedon oikeellisuus pitäisi varmentaa. Infrastruktuuria käytetään yhdessä yleisen kustannusarvioprosessimallin kanssa. Tämä integrointi johtaa tarkempiin ja selkeämpiin kustannusarvioihin autoteollisuudessa.

The Role of Logistics as a Competitiveness Factor when Entering New Markets

Tämän diplomityön tarkoituksena on löytää halvin tapa kohdeyrityksen tuotteiden saamiseksi määritellyille kohdemarkkinoille. Logistiset kustannukset ovat erityisen tärkeässä asemassa esimerkkitoimialalla, ja käytettävissä olevien logististen ratkaisujen kirjo tekee tehtävästä erityisen haastavan. Yrityksen ja teollisuudenalan erityispiirteiden esittelyn jälkeen valitaan sopiva tapa päästä markkinoille, minkä lisäksi pohditaan erilaisia kilpailustrategioita yrityksen aikaisempien kokemusten ja teoreettisen käsittelyn pohjalta. Tämä pohdinta on erilaisten analyysimenetelmien esittelyn lisäksi työn empiirisen osan taustalla. Logistiikkaympäristön ymmärtäminen ja sen tarjoamien mahdollisuuksien tunnistaminen ovat tärkeimmällä sijalla koko tutkimuksen ajan. Työssä tarkastellaan myös vientilogistiikan ja kohdemarkkinoiden erityispiirteitä, joita sovelletaan harkitsemisenarvoisiin kuljetustapoihin. Mahdollisten logististen ratkaisujen kustannusrakenteen ja kilpailukyvyn selvittämiseksi päätöksenteon tueksi luodaan yksilölliset vuokaaviot yrityksen omien kokemusten ja eri logistiikkapalvelujen tarjoajien lausuntojen perusteella. Näin voidaan edelleen tunnistaa mielekkäimmät logistiset ketjut ja arvioida niiden kustannustehokkuutta sekä suorien logististen että laatukustannusten suhteen. Lisäksi esimerkkien avulla tarkastellaan mahdollisuuksia benchmarkkaukseen. Työn lopuksi suositellaan johtopäätösten pohjalta tulevia toimenpiteitä, jotta myös jatkossa saataisiin aikaan vastaavaa pohdintaa ja toimintaa.

The Pursuit of Efficient Copyright Licensing : How Some Rights Reserved Attempts to Solve the Problems of All Rights Reserved

This dissertation analyses the growing pool of copyrighted works, which are offered to the public using Creative Commons licensing. The study consist of analysis of the novel licensing system, the licensors, and the changes of the "all rights reserved" —paradigm of copyright law. Copyright law reserves all rights to the creator until seventy years have passed since her demise. Many claim that this endangers communal interests. Quite often the creators are willing to release some rights. This, however, is very difficult to do and needs help of specialized lawyers. The study finds that the innovative Creative Commons licensing scheme is well suited for low value - high volume licensing. It helps to reduce transaction costs on several le¬vels. However, CC licensing is not a "silver bullet". Privacy, moral rights, the problems of license interpretation and license compatibility with other open licenses and collecting societies remain unsolved. The study consists of seven chapters. The first chapter introduces the research topic and research questions. The second and third chapters inspect the Creative Commons licensing scheme's technical, economic and legal aspects. The fourth and fifth chapters examine the incentives of the licensors who use open licenses and describe certain open business models. The sixth chapter studies the role of collecting societies and whether two institutions, Creative Commons and collecting societies can coexist. The final chapter summarizes the findings. The dissertation contributes to the existing literature in several ways. There is a wide range of prior research on open source licensing. However, there is an urgent need for an extensive study of the Creative Commons licensing and its actual and potential impact on the creative ecosystem.

Maritime transportation in the Gulf of Finland in 2007 and in 2015

The Gulf of Finland is said to be one of the densest operated sea areas in the world. It is a shallow and economically vulnerable sea area with dense passenger and cargo traffic of which petroleum transports have a share of over 50 %. The winter conditions add to the risks of maritime traffic in the Gulf of Finland. It is widely believed that the growth of maritime transportation will continue also in the future. The Gulf of Finland is surrounded by three very different national economies with, different maritime transportation structures. Finland is a country of high GDP/per capita with a diversified economic structure. The number of ports is large and the maritime transportation consists of many types of cargoes: raw materials, industrial products, consumer goods, coal and petroleum products, and the Russian transit traffic of e.g. new cars and consumer goods. Russia is a large country with huge growth potential; in recent years, the expansion of petroleum exports has lead to a strong economic growth, which is also apparent in the growth of maritime transports. Russia has been expanding its port activities in the Gulf of Finland and it is officially aiming to transport its own imports and exports through the Russian ports in the future; now they are being transported to great extend through the Finnish, Estonian and other Baltic ports. Russia has five ports in the Gulf of Finland. Estonia has also experienced fast economic growth, but the growth has been slowing down already during the past couples of years. The size of its economy is small compared to Russia, which means the transported tonnes cannot be very massive. However, relatively large amounts of the Russian petroleum exports have been transported through the Estonian ports. The future of the Russian transit traffic in Estonia looks nevertheless uncertain and it remains to be seen how it will develop and if Estonia is able to find replacing cargoes if the Russian transit traffic will come to an end in the Estonian ports. Estonia’s own import and export consists of forestry products, metals or other raw materials and consumer goods. Estonia has many ports on the shores of the Gulf of Finland, but the port of Tallinn dominates the cargo volumes. In 2007, 263 M tonnes of cargoes were transported in the maritime traffic in the Gulf of Finland, of which the share of petroleum products was 56 %. 23 % of the cargoes were loaded or unloaded in the Finnish ports, 60 % in the Russian ports and 17 % in the Estonian ports. The largest ports were Primorsk (74.2 M tonnes) St. Petersburg (59.5 M tonnes), Tallinn (35.9 M tonnes), Sköldvik (19.8 M tonnes), Vysotsk (16.5 M tonnes) and Helsinki (13.4 M) tonnes. Approximately 53 600 ship calls were made in the ports of the Gulf of Finland. The densest traffic was found in the ports of St. Petersburg (14 651 ship calls), Helsinki (11 727 ship calls) and Tallinn (10 614 ship calls) in 2007. The transportation scenarios are usually based on the assumption that the amount of transports follows the development of the economy, although also other factors influence the development of transportation, e.g. government policy, environmental aspects, and social and behavioural trends. The relationship between the development of transportation and the economy is usually analyzed in terms of the development of GDP and trade. When the GDP grows to a certain level, especially the international transports increase because countries of high GDP produce, consume and thus transport more. An effective transportation system is also a precondition for the economic development. In this study, the following factors were taken into consideration when formulating the future scenarios: maritime transportation in the Gulf of Finland 2007, economic development, development of key industries, development of infrastructure and environmental aspects in relation to maritime transportation. The basic starting points for the three alternative scenarios were: • the slow growth scenario: economic recession • the average growth scenario: economy will recover quickly from current instability • the strong growth scenario: the most optimistic views on development will realize According to the slow growth scenario, the total tonnes for the maritime transportation in the Gulf of Finland would be 322.4 M tonnes in 2015, which would mean a growth of 23 % compared to 2007. In the average growth scenario, the total tonnes were estimated to be 431.6 M tonnes – a growth of 64 %, and in the strong growth scenario 507.2 M tonnes – a growth of 93%. These tonnes were further divided into petroleum products and other cargoes by country, into export, import and domestic traffic by country, and between the ports. For petroleum products, the share of crude oil and oil products was estimated and the number of tanker calls in 2015 was calculated for each scenario. However, the future development of maritime transportation in the GoF is dependent on so many societal and economic variables that it is not realistic to predict one exact point estimate value for the cargo tonnes for a certain scenario. Plenty of uncertainty is related both to the degree in which the scenario will come true as well as to the cause-effect relations between the different variables. For these reasons, probability distributions for each scenario were formulated by an expert group. As a result, a range for the total tonnes of each scenario was formulated and they are as follows: the slow growth scenario: 280.8 – 363 M tonnes (expectation value 322.4 M tonnes)

Improving the effectiveness of supply chain development work – an expert role perspective

This study focuses to the intersection of three sets of activities in a company: expert work, development work and supply chain management, SCM. Experts and expert work represent a set of individuals whose efficiency and impact this study is intended to improve, while development work defines the set of organizational activities to focus on. SCM as an expertise area acts as the platform on which this study is built. The study has two aims. Firstly, it aims to derive a model helping an SCM expert to increase the effectiveness of expert work in development tasks by understanding the encountered organizational situations and processes better, reflecting his/her past and future actions to organizational processes and selecting and adjusting the processes and contents of his/her work accordingly. Secondly, it aims to develop applicable approaches and methods to understand, evaluate and manage the organizational processes and situations in development work. The integrative model on approaches and methods to improve the effectiveness of development processes is split to two aggregate dimensions: technical performance of the developed solution and consumption of resources of the development process. Six potential approaches and methods aiming at helping in the management of organizational dimensions are presented in enclosed publications. The approaches focus on three subtasks of development work: decision making, implementation and change, and knowledge accumulation. The approaches and methods have been tested in case studies representing typical development processes in the area of supply chain management. As a result, four suggestions are presented. Firstly, SCM experts are advised to consider the SCM development work to be consisting of development processes. Secondly, inside these processes they should identify and evaluate the risk of difficult decision-making related to organizational factors. Thirdly, they are prompted for an active role in implementation and change, supporting the implementation through whole process. Finally, the development should be seen in a holistic view, taking into account the stage of knowledge and organizational issues related to it, and adopt a knowledge development strategy.