On Short Exponential Sums Involving Fourier Coefficients of Holomorphic Cusp Forms

By an exponential sum of the Fourier coefficients of a holomorphic cusp form we mean the sum which is formed by first taking the Fourier series of the said form,then cutting the beginning and the tail away and considering the remaining sum on the real axis. For simplicity’s sake, typically the coefficients are normalized. However, this isn’t so important as the normalization can be done and removed simply by using partial summation. We improve the approximate functional equation for the exponential sums of the Fourier coefficients of the holomorphic cusp forms by giving an explicit upper bound for the error term appearing in the equation. The approximate functional equation is originally due to Jutila [9] and a crucial tool for transforming sums into shorter sums. This transformation changes the point of the real axis on which the sum is to be considered. We also improve known upper bounds for the size estimates of the exponential sums. For very short sums we do not obtain any better estimates than the very easy estimate obtained by multiplying the upper bound estimate for a Fourier coefficient (they are bounded by the divisor function as Deligne [2] showed) by the number of coefficients. This estimate is extremely rough as no possible cancellation is taken into account. However, with small sums, it is unclear whether there happens any remarkable amounts of cancellation.

Analysis of electricity distribution network operation business models and capitalization of control room functions with DMS

Electricity distribution network operation (NO) models are challenged as they are expected to continue to undergo changes during the coming decades in the fairly developed and regulated Nordic electricity market. Network asset managers are to adapt to competitive technoeconomical business models regarding the operation of increasingly intelligent distribution networks. Factors driving the changes for new business models within network operation include: increased investments in distributed automation (DA), regulative frameworks for annual profit limits and quality through outage cost, increasing end-customer demands, climatic changes and increasing use of data system tools, such as Distribution Management System (DMS). The doctoral thesis addresses the questions a) whether there exist conditions and qualifications for competitive markets within electricity distribution network operation and b) if so, identification of limitations and required business mechanisms. This doctoral thesis aims to provide an analytical business framework, primarily for electric utilities, for evaluation and development purposes of dedicated network operation models to meet future market dynamics within network operation. In the thesis, the generic build-up of a business model has been addressed through the use of the strategicbusiness hierarchy levels of mission, vision and strategy for definition of the strategic direction of the business followed by the planning, management and process execution levels of enterprisestrategy execution. Research questions within electricity distribution network operation are addressed at the specified hierarchy levels. The results of the research represent interdisciplinary findings in the areas of electrical engineering and production economics. The main scientific contributions include further development of the extended transaction cost economics (TCE) for government decisions within electricity networks and validation of the usability of the methodology for the electricity distribution industry. Moreover, DMS benefit evaluations in the thesis based on the outage cost calculations propose theoretical maximum benefits of DMS applications equalling roughly 25% of the annual outage costs and 10% of the respective operative costs in the case electric utility. Hence, the annual measurable theoretical benefits from the use of DMS applications are considerable. The theoretical results in the thesis are generally validated by surveys and questionnaires.

Operations management in courts of justice - outlining functions, challenges and development possibilities

Professional services are an increasingly important group of economy and related to them there has been identified a fairly new concept called professional service operations management. However professional service operations management is still quite under-researched area which needs further research especially in specific contexts. This study aims to respond to that need by examining courts as an environment for operations management. As a result there is a preliminary structured description of what operations management is and could be in courts. The study also aims to inspire and tentatively classify possible areas for future research. Courts are examined based on three common perspectives for typical characteristics of professional services which can be identified in literature: the nature of customer role, the nature of professional work and the nature of process and product. The examination is based on research data from several research projects conducted in Finland and other European countries. Based on the examination it can be said that the operational environment of courts is highly complex and demanding because the case as an object of operations management tasks is challenging, the process sets strict requirements to the handling of the cases and the workforce is hard to direct.

Quasiconformal mappings and inequalities involving special functions

This PhD thesis in Mathematics belongs to the field of Geometric Function Theory. The thesis consists of four original papers. The topic studied deals with quasiconformal mappings and their distortion theory in Euclidean n-dimensional spaces. This theory has its roots in the pioneering papers of F. W. Gehring and J. Väisälä published in the early 1960’s and it has been studied by many mathematicians thereafter. In the first paper we refine the known bounds for the so-called Mori constant and also estimate the distortion in the hyperbolic metric. The second paper deals with radial functions which are simple examples of quasiconformal mappings. These radial functions lead us to the study of the so-called p-angular distance which has been studied recently e.g. by L. Maligranda and S. Dragomir. In the third paper we study a class of functions of a real variable studied by P. Lindqvist in an influential paper. This leads one to study parametrized analogues of classical trigonometric and hyperbolic functions which for the parameter value p = 2 coincide with the classical functions. Gaussian hypergeometric functions have an important role in the study of these special functions. Several new inequalities and identities involving p-analogues of these functions are also given. In the fourth paper we study the generalized complete elliptic integrals, modular functions and some related functions. We find the upper and lower bounds of these functions, and those bounds are given in a simple form. This theory has a long history which goes back two centuries and includes names such as A. M. Legendre, C. Jacobi, C. F. Gauss. Modular functions also occur in the study of quasiconformal mappings. Conformal invariants, such as the modulus of a curve family, are often applied in quasiconformal mapping theory. The invariants can be sometimes expressed in terms of special conformal mappings. This fact explains why special functions often occur in this theory.

Qualitative Characteristics and Quantitative Measures of Solution's Reliability in Discrete Optimization: Traditional Analytical Approaches, Innovative Computational Methods and Applicability

The purpose of this thesis is twofold. The first and major part is devoted to sensitivity analysis of various discrete optimization problems while the second part addresses methods applied for calculating measures of solution stability and solving multicriteria discrete optimization problems. Despite numerous approaches to stability analysis of discrete optimization problems two major directions can be single out: quantitative and qualitative. Qualitative sensitivity analysis is conducted for multicriteria discrete optimization problems with minisum, minimax and minimin partial criteria. The main results obtained here are necessary and sufficient conditions for different stability types of optimal solutions (or a set of optimal solutions) of the considered problems. Within the framework of quantitative direction various measures of solution stability are investigated. A formula for a quantitative characteristic called stability radius is obtained for the generalized equilibrium situation invariant to changes of game parameters in the case of the H¨older metric. Quality of the problem solution can also be described in terms of robustness analysis. In this work the concepts of accuracy and robustness tolerances are presented for a strategic game with a finite number of players where initial coefficients (costs) of linear payoff functions are subject to perturbations. Investigation of stability radius also aims to devise methods for its calculation. A new metaheuristic approach is derived for calculation of stability radius of an optimal solution to the shortest path problem. The main advantage of the developed method is that it can be potentially applicable for calculating stability radii of NP-hard problems. The last chapter of the thesis focuses on deriving innovative methods based on interactive optimization approach for solving multicriteria combinatorial optimization problems. The key idea of the proposed approach is to utilize a parameterized achievement scalarizing function for solution calculation and to direct interactive procedure by changing weighting coefficients of this function. In order to illustrate the introduced ideas a decision making process is simulated for three objective median location problem. The concepts, models, and ideas collected and analyzed in this thesis create a good and relevant grounds for developing more complicated and integrated models of postoptimal analysis and solving the most computationally challenging problems related to it.

Role and Function of c-Jun Protein Complex in Cancer Cell Behavior

Transcription factors play a crucial role in the regulation of cell behavior by modulating gene expression profiles. Previous studies have described a dual role for the AP-1 family transcription factor c-Jun in the regulation of cellular fate. In various cell types weak and transient activations of c-Jun N-terminal kinase (JNK) and c-Jun appear to contribute to proliferation and survival, whereas strong and prolonged activation of JNK and c-Jun result in apoptosis. These opposite roles played by c-Jun are cell type specific and the molecular mechanisms defining these antonymous c-Jun-mediated responses remain incompletely understood. c-Jun activity in transformed cells is regulated by signalling cascades downstream of oncoproteins such as Ras and Raf. In addition, the pro-proliferative role and the survival promoting function for c-Jun has been described in various cancer models. Furthermore, c-Jun was described to be overexpressed in different cancer types. However, the molecular mechanisms by which c-Jun exerts these oncogenic functions are not all clearly established. Therefore it is of primary interest to further identify molecular mechanisms and functions for c-Jun in cancer. Regulation of gene expression is tightly dependent on accurate protein-protein interactions. Therefore, co-factors for c-Jun may define the functions for c-Jun in cancer. Identification of protein-protein interactions promoting cancer may provide novel possibilities for cancer treatment. In this study, we show that DNA topoisomerase I (TopoI) is a transcriptional co-factor for c-Jun. Moreover, c-Jun and TopoI together promote expression of epidermal growth factor receptor (EGFR) in cancer cells. We also show that the clinically used TopoI inhibitor topotecan reduces EGFR expression. Importantly, the effect of TopoI on EGFR transcription was shown to depend on c-Jun as Jun-/- cells or cells treated with JNK inhibitor SP600125 are resistant to topotecan treatment both in regulation of EGFR expression and cell proliferation. Moreover, c-Jun regulates the nucleolar localization and the function of the ribonucleic acid (RNA) helicase DDX21, a previously identified member of c-Jun protein complex. In addition, c-Jun stimulates rRNA processing by supporting DDX21 rRNA binding. Finally, this study characterizes a DDX21 dependent expression of cyclin dependent kinase (Cdk) 6, a correlation of DDX21 expression with prostate cancer progression and a substrate binding dependency of DDX21 nucleolar localization in prostate cancer cells. Taken together, the results of this study validate the c-Jun-TopoI interaction and precise the c-Jun-DDX21 interaction. Moreover, these results show the importance for protein-protein interaction in the regulation of their cellular functions in cancer cell behavior. Finally, the results presented here disclose new exciting therapeutic opportunities for cancer treatment.

The molecular mechanisms and evolutionary significance of plumage colour variation in pied flycatchers (Ficedula hypoleuca)

A common feature of natural populations is that individuals differ in morphology, physiologyand behavior (i.e .phenotype). A thorough understanding of the molecular mechanisms and evolutionary forces behind this phenotypic variation is a prerequisite for understanding evolution.This thesis examines the molecular mechanism and the roles of the different evolutionary forces in plumage colour variation in pied flycatchers (Ficedulahypoleuca). Malepied flycatchers exhibit marked variation in both pigmentary and structural plumage colourand the trait has repeatedly been suggested to be of adaptive significance. An examination of plumage colour variation on reproductive output trevealed that structural colouration, and more specifically the degree of ultraviolet (UV) reflectance had an effect on number of young sired. Paternity analyses of breeding males revealed that males that had been cuckolded by their social mate tended to be less UV reflectant than males that had not been cuckolded.Neither pigment-based norstructural colouration was found to affect the probability of siring young in other nests. Phenotypic differentiation was found to be markedly greater than differentiation at neutralgenetic markers across the pied flycatcher breeding range. Furthermore patterns of differentiationin phenotypes and selectively neutral genes were not uniform. Outlier tests searching for genomic footprints of selection revealed elevated levels of genetic divergence in a gene associated with feather development (and thus potentially structural colouration) and ultraviolet vision. Th eobserved differentiation in allelic frequencies was particularly pronounced in the Spanish piedflycatcher populations. Examining gene expression during feather development indicated that the TYRP1 gene (known to be involved in the production of black pigment) may be relevant in generating phenotypic variation in pied flycatcher plumage. Also, energy homeostasis related genesfeatured prominently among the genes found to be expressed in one extreme phenotype but not the other. This is of particular interest in light of what is known about the pleiotropy ofthe melanocortin system which underlies brown-black pigment production. The melanocortinsystem is also associated with energy homeostasis (among a number of other physiological functions) and thus the results could be pointing to the signalling function of brown-blackplumage. Plumage colour variation in pied flycatchers, both structural and pigmentary, can thus beconcluded to be exhibiting signals of non-neutral evolution. Structural colouration was found to play a role in sexual selection and putative signals of selection were further detected in acandidate gene for this trait. Evidence for non-neutral evolution of pigmentary colouration was also detected. These findings, together with the fact that preliminary evidence for an energy balance associated signalling function for plumage was found, present good starting points for further investigations into the meaning and mechanisms of plumage colour variation in piedflycatchers.

Transfer of Administrative HR Services to Global Service Center in Poland

Liiketoimintaa tukevien palvelujen etätuotanto edustaa uutta kansainvälistymisen muotoa. Kehittyvien markkinoiden nousu yhdistettynä yritysten arvoketjutoimintojen kansainvälistymiseen on luonut yrityksille kasvavan paineen etsiä parasta sijaintia toiminnoilleen. Monikansalliset yritykset ovat yhä useammin korvanneet paikallisia henkilöstöpalvelujaan siirtymällä globaaliin malliin jaettujen palvelujen tuotannossa. Tämä diplomityö on toteutettu tukeakseen UPM:n henkilöstöhallintoa globaalin palvelukeskuksen perustamisessa Puolaan. Tutkimuksen tavoitteena on laajentaa käsitystä henkilöstöpalvelujen tarjontamallin uudistamiseen johtaneista tekijöistä ja motiiveista. Empiirisen tutkimuksen tärkein tavoite on tukea rekrytoinnin hallinnollisten töiden siirtoa globaaliin palvelukeskukseen palvelun laadun säilyessä vähintään aikaisemmalla tasolla. Tutkimuksen tulokset painottavat strategista näkökulmaa muutokseen. Strategiset syyt UPM:n henkilöstöhallinnon globaalin palvelukeskuksen perustamiselle sisältävät ylikapasiteetin ja päällekkäisten toimintojen vähentämisen eri maissa. Muutos lisää palvelun joustavuutta sekä edesauttaa toiminnan läpinäkyvyyttä, ennustettavuutta ja kustannusten valvontaa. Onnistuneesti toteutetut jaetut palvelut voivat toimia hyvänä lähtökohtana tehokkaiden henkilöstöpalvelujen tuottamiselle.

Muscarinic toxins : characterization of adrenoceptor binding and applicability of membrane anchoring via glycosylphosphatidylinositol tail

Adrenoceptors (ARs), G-protein coupled receptors (GPCRs) at the plasma membrane, respond to endogenous catecholamines noradrenaline and adrenaline. These receptors mediate several important physiological functions being especially important in the cardiovascular system and in the regulation of smooth muscle contraction. Impairments in the function of these receptors can thus lead to severe diseases and disorders such as to cardiovascular diseases and benign prostatic hyperplasia. The Eastern green mamba (Dendroaspis angusticeps) venom has been shown to contain toxins that can antagonize the functions of GPCRs. The most well-known are muscarinic toxins (MTs) targeting muscarinic acetylcholine receptors (mAChRs) with high affinity and selectivity. However, some reports have indicated that these toxins might also act on the α1- and α2-ARs which can be divided into various subtypes; the α1-ARs to α1A-, α1B- and α1D-ARs and α2-ARs to α2A-, α2B- and α2C-ARs. In this thesis, the interaction of four common MTs (MT1, MT3, MT7 and MTα) with the adrenoceptors was characterized. It was also evaluated whether these toxins could be anchored to the plasma membrane via glycosylphosphatidylinositol (GPI) tail. Results of this thesis reveal that muscarinic toxins are targeting several α-adrenoceptor subtypes in addition to their previously identified target receptors, mAChRs. MTα was found to interact with high affinity and selectivity with the α2B-AR whereas MT7 confirmed its selectivity for the M1 mAChR. Unlike MTα and MT7, MT1 and MT3 have a broad range of target receptors among the α-ARs. All the MTs characterized were found to behave as non-competitive antagonists of receptor action. The interaction between MTα and the α2B-AR was studied more closely and it was observed that the second extracellular loop of the receptor functions as a structural entity enabling toxin binding. The binding of MTα to the α2B-AR appears to be rather complex and probably involves dimerized receptor. Anchoring MTs to the plasma membrane did not interfere with their pharmacological profile; all the GPI-anchored toxins created retained their ability to block their target receptors. This thesis shows that muscarinic toxins are able to target several subtypes of α-ARs and mAChRs. These toxins offer thus a possibility to create new subtype specific ligands for the α-AR subtypes. Membrane anchored MTs on the other hand could be used to block α-AR and mAChR actions in disease conditions such as in hypertension and in gastrointestinal and urinary bladder disorders in a cell-specific manner and to study the physiological functions of ARs and mAChRs in vivo in model organisms.

The Combined treatment of UV Light and Titanium Dioxide (TiO2) in Grease Filtration Technique

The aim of this thesis was to identify the best grease removal technique with the application of low power of UV light to TiO2 coated grease filters. The treatment with various power series of ozone generating and ozone free lamps to normal grease filters and TiO2 coated grease filters were examined and the obtained results are compared to each other in this paper. The effect of ozone reaction was observed and compared with the effect of TiO2. The experiments were solely based on the photo oxidation and photo catalytic oxidation reactions. TiO2 is a green catalyst used in the photocatalytic reaction. Sunflower oil was used for grease production and tetracholoroethylene as a solvent. Grease samples were collected from the ventilation duct connected to the cooking hood system. Sample extraction was done in ultrasonic bath with the principle of sonication. The sample analysis was done by FTIR machine. The result determining the concentration of grease was the quantification of saturated C-H bonds in the chosen peak group of the spectrum. A very low power of UVC light functions perfectly with the Titanium dioxide. The experimental results have shown the combined treatment of titanium dioxide and UV light is an effective method in grease removal process. The photocatalytic reaction with titanium dioxide is better than photo oxidation reaction with ozone treatment. Photocatalytic reaction is environmentally friendly, energy efficient and economical.

Real-time simulation of multibody systems with applications for working mobile vehicles

This dissertation describes an approach for developing a real-time simulation for working mobile vehicles based on multibody modeling. The use of multibody modeling allows comprehensive description of the constrained motion of the mechanical systems involved and permits real-time solving of the equations of motion. By carefully selecting the multibody formulation method to be used, it is possible to increase the accuracy of the multibody model while at the same time solving equations of motion in real-time. In this study, a multibody procedure based on semi-recursive and augmented Lagrangian methods for real-time dynamic simulation application is studied in detail. In the semirecursive approach, a velocity transformation matrix is introduced to describe the dependent coordinates into relative (joint) coordinates, which reduces the size of the generalized coordinates. The augmented Lagrangian method is based on usage of global coordinates and, in that method, constraints are accounted using an iterative process. A multibody system can be modelled as either rigid or flexible bodies. When using flexible bodies, the system can be described using a floating frame of reference formulation. In this method, the deformation mode needed can be obtained from the finite element model. As the finite element model typically involves large number of degrees of freedom, reduced number of deformation modes can be obtained by employing model order reduction method such as Guyan reduction, Craig-Bampton method and Krylov subspace as shown in this study The constrained motion of the working mobile vehicles is actuated by the force from the hydraulic actuator. In this study, the hydraulic system is modeled using lumped fluid theory, in which the hydraulic circuit is divided into volumes. In this approach, the pressure wave propagation in the hoses and pipes is neglected. The contact modeling is divided into two stages: contact detection and contact response. Contact detection determines when and where the contact occurs, and contact response provides the force acting at the collision point. The friction between tire and ground is modelled using the LuGre friction model, which describes the frictional force between two surfaces. Typically, the equations of motion are solved in the full matrices format, where the sparsity of the matrices is not considered. Increasing the number of bodies and constraint equations leads to the system matrices becoming large and sparse in structure. To increase the computational efficiency, a technique for solution of sparse matrices is proposed in this dissertation and its implementation demonstrated. To assess the computing efficiency, augmented Lagrangian and semi-recursive methods are implemented employing a sparse matrix technique. From the numerical example, the results show that the proposed approach is applicable and produced appropriate results within the real-time period.

Structure learning of context-specific graphical models

Abstract The ultimate problem considered in this thesis is modeling a high-dimensional joint distribution over a set of discrete variables. For this purpose, we consider classes of context-specific graphical models and the main emphasis is on learning the structure of such models from data. Traditional graphical models compactly represent a joint distribution through a factorization justi ed by statements of conditional independence which are encoded by a graph structure. Context-speci c independence is a natural generalization of conditional independence that only holds in a certain context, speci ed by the conditioning variables. We introduce context-speci c generalizations of both Bayesian networks and Markov networks by including statements of context-specific independence which can be encoded as a part of the model structures. For the purpose of learning context-speci c model structures from data, we derive score functions, based on results from Bayesian statistics, by which the plausibility of a structure is assessed. To identify high-scoring structures, we construct stochastic and deterministic search algorithms designed to exploit the structural decomposition of our score functions. Numerical experiments on synthetic and real-world data show that the increased exibility of context-specific structures can more accurately emulate the dependence structure among the variables and thereby improve the predictive accuracy of the models.

Ohjelmistotuotteen asiakasversioiden tuotannon ja hallinnan tehostaminen

Työssä tutkittiin menetelmiätehostaa ohjelmistotuotteen asiakasversioiden tuotantoa ja hallintaa. Työ toteutettiin ohjelmistoyrityksessä ja sen ohjelmistotuotteet olivat tutkimuksen ensisijaisena kohteena. Päätavoitteena työssä oli luoda järjestelmällinen menetelmä hallita tuotteisiin ja niiden asiakasversioihin liittyviä tietoja. Toissijaisena tavoitteena oli etsiä ratkaisuja haasteisiin, joita tuotteesta tehtävien asiakasversioiden tuottaminen ja ylläpitäminen aiheuttavat. Työssä todettiin, että tuotteen hallittavuuden ja laadun kannalta on äärimmäisen tärkeääkäyttää mahdollisimman paljon yhteisiä komponentteja tuotteen asiakasversioissa. Useissa tapauksissa asiakasversioiden väliset erot voidaan toteuttaa tekemällätuotteen komponenteista konfiguroitavia. Eri konfigurointitapoja ja -kohteita on esitelty. Työssä havaittiin muutostenhallintaprosessin tärkeyden kasvavan tuotteen asiakkaiden määrän kasvaessa. Ylläpidonaikaisten, usein toistuvien toimenpiteiden automatisointi ja ohjeistava dokumentointi huomattiin tärkeäksi tehostamiskeinoksi. Tuotteen asiakasversioiden välisten eroavaisuuksien dokumentoinnin havaittiin parantavan tuotteen hallittavuutta. Työssä toteutettiin järjestelmä tuotteisiin ja asiakkaisiin liittyvien tietojen ylläpitoa varten. Järjestelmän todettiin vähentävän hallintatoimenpiteisiin kuluvaa aikaa. Järjestelmän tarjoaman keskitetyn tiedonhallinnan havaittiin yhtenäistävän eri tuotteiden tiedonhallintaa ja parantavan tuotteiden laatua. Järjestelmä tukee toiminnallisuuksillaan asiakasversioiden toimitusten tekemistä vähentäen niiden aikana tapahtuvia virheitä. Tämä nostaa tuotteiden laatua. Järjestelmään toteutettiin tuotteiden konfigurointia tehostavia toiminnallisuuksia. Kyseisten toiminnallisuuksien todettiin vähentävän konfigurointiin kuluvaa aikaa ja parantavan tuotteidenlaatua.

Kassanhallintakäytännöt Suomen kunnissa

Kassanhallintakirjallisuus on pitkälti normatiivista tai yksittäisiä kohteita ja niiden kassanhallinnanosa-alueita tarkastelevaa case-tutkimusta. Sen sijaan kassanhallintaa laajalla tutkimuskohdejoukolla strategia- ja järjestelmävalintojen näkökulmasta tarkastelevia tutkimuksia on tehty vain vähän. Tämä suomalaista kuntakenttää tarkastelevaeksploratiivinen tutkimus antaa kuvan rakenne-, strategia- ja järjestelmävalinnoista, joita kunnat ovat painottaneet kassanhallinnassaan vuosina 2000 - 2002. Tutkimuksen metodologisena viitekehyksenä käytetty kontingenssilähestymistapaan pohjautuva konfiguratiivinen systeemimalli mahdollisti suuren tutkimuskohdejoukonstrategia- ja järjestelmäkäytäntöjen erojen kvantitatiivisen analysoinnin. Ryhmittelyanalyysin avulla tutkimusdatasta muodostui neljä strategia- ja järjestelmäpainotuksiltaan toisistaan eroavaa kuntaryhmää, ja tutkimustulokset osoittivat kuntien kassanhallintakäytäntöjen olevan hyvin samankaltaisia yksityissektorin vastaaviin käytäntöihin verrattuna; myös julkissektorin kassanhallinnassa painotetaan kustannustehokkuutta. Kustannustehokkuusstrategian rinnalla vastaajakunnat painottivat sijoitus-, lainanhoito- ja riskienhallintastrategioita sekä em. strategioiden toteuttamista tukevia rakenne- ja järjestelmävalintoja. Myös pienempienkuntien havaittiin tukeutuneen samoihin strategia- ja järjestelmäpainotuksiin kuin isommat kunnat, vaikka esim. järjestelmien käytännön tietohallintaratkaisuissa saattaa esiintyä kuntakoosta johtuvia eroja. Lisäksi joustavuusstrategian painoarvo osana kuntien kassanhallintastrategioita oli suuri. Tämä on johdonmukaista, sillä kassapositioiden ennakoimattomat muutokset edellyttävät nopeaa päätöksentekoa. Kustannustehokkuusajattelulla, kassanhoitokokonaisuuden ymmärtämisellä ja uusien kassanhoitotekniikoiden sekä rahoitusinstrumenttien selektiivisellä käytöllä on mahdollista vaikuttaa kuntien rahoituksenhoidon nettokustannuksiin.

Kotimaan tuotekuljetusten kehittäminen

Työn tavoitteena oli selvittää kotimaan tuotekuljetusten nykytila ja löytää mahdollisia kehityskohteita kuljetustoiminnan kehittämiselle. Kotimaan tuotekuljetuksiin kuuluivat kotimaan asiakaskuljetukset sekä viennin esikuljetukset satamiin. Tarkoituksena oli saada aikaan hallittu kokonaisuus kotimaan kuljetusten osalta. Kuljetusten kehittäminen aloitettiin selvittämällä Finnforestin kotimaan kuljetusten nykytila. Kotimaan tuotekuljetuksia tutkittiin haastattelujen, vierailuiden, voimassa olevien sopimusten ja yrityksen oman tietojärjestelmän avulla. Selvityksessä havaittuihin ongelmiin pyrittiin löytämään mahdollisia ratkaisuja. Kuljetusten kehittämiskohteita löytyi paljon. Kuljetuksia tulisi hoitaa tulevaisuudessa konsernitasolta, jotta kotimaan kuljetuksia saadaan yhdenmukaistettua ja kuljetuskumppanien määrää karsittua. Ristiin kuljetuksen vähentäminen pienentäisi vuosittaisia kuljetuskustannuksia. Kuljetusten suunnittelu ja kehittely helpottuisi tulevaisuudessa, jos yrityksessä otettaisiin käyttöön EDI –yhteydet sekä kuljetuksia seurattaisiin jatkuvasti ongelmien havaitsemiseksi ajoissa.