Power and Performance Management Strategies on NoC-Based Multicore Platforms, Using DVFS, Adaptive Algorithm and Task Parallelism

This work presents synopsis of efficient strategies used in power managements for achieving the most economical power and energy consumption in multicore systems, FPGA and NoC Platforms. In this work, a practical approach was taken, in an effort to validate the significance of the proposed Adaptive Power Management Algorithm (APMA), proposed for system developed, for this thesis project. This system comprise arithmetic and logic unit, up and down counters, adder, state machine and multiplexer. The essence of carrying this project firstly, is to develop a system that will be used for this power management project. Secondly, to perform area and power synopsis of the system on these various scalable technology platforms, UMC 90nm nanotechnology 1.2v, UMC 90nm nanotechnology 1.32v and UMC 0.18 μmNanotechnology 1.80v, in order to examine the difference in area and power consumption of the system on the platforms. Thirdly, to explore various strategies that can be used to reducing system’s power consumption and to propose an adaptive power management algorithm that can be used to reduce the power consumption of the system. The strategies introduced in this work comprise Dynamic Voltage Frequency Scaling (DVFS) and task parallelism. After the system development, it was run on FPGA board, basically NoC Platforms and on these various technology platforms UMC 90nm nanotechnology1.2v, UMC 90nm nanotechnology 1.32v and UMC180 nm nanotechnology 1.80v, the system synthesis was successfully accomplished, the simulated result analysis shows that the system meets all functional requirements, the power consumption and the area utilization were recorded and analyzed in chapter 7 of this work. This work extensively reviewed various strategies for managing power consumption which were quantitative research works by many researchers and companies, it's a mixture of study analysis and experimented lab works, it condensed and presents the whole basic concepts of power management strategy from quality technical papers.

Energy-efficient control strategies for variable speed driven parallel pumping systems based on pump operation point monitoring with frequency converters

The pumping processes requiring wide range of flow are often equipped with parallelconnected centrifugal pumps. In parallel pumping systems, the use of variable speed control allows that the required output for the process can be delivered with a varying number of operated pump units and selected rotational speed references. However, the optimization of the parallel-connected rotational speed controlled pump units often requires adaptive modelling of both parallel pump characteristics and the surrounding system in varying operation conditions. The available information required for the system modelling in typical parallel pumping applications such as waste water treatment and various cooling and water delivery pumping tasks can be limited, and the lack of real-time operation point monitoring often sets limits for accurate energy efficiency optimization. Hence, alternatives for easily implementable control strategies which can be adopted with minimum system data are necessary. This doctoral thesis concentrates on the methods that allow the energy efficient use of variable speed controlled parallel pumps in system scenarios in which the parallel pump units consist of a centrifugal pump, an electric motor, and a frequency converter. Firstly, the suitable operation conditions for variable speed controlled parallel pumps are studied. Secondly, methods for determining the output of each parallel pump unit using characteristic curve-based operation point estimation with frequency converter are discussed. Thirdly, the implementation of the control strategy based on real-time pump operation point estimation and sub-optimization of each parallel pump unit is studied. The findings of the thesis support the idea that the energy efficiency of the pumping can be increased without the installation of new, more efficient components in the systems by simply adopting suitable control strategies. An easily implementable and adaptive control strategy for variable speed controlled parallel pumping systems can be created by utilizing the pump operation point estimation available in modern frequency converters. Hence, additional real-time flow metering, start-up measurements, and detailed system model are unnecessary, and the pumping task can be fulfilled by determining a speed reference for each parallel-pump unit which suggests the energy efficient operation of the pumping system.

Green welding in practice

Efficient production and consumption of energy has become the top priority of national and international policies around the world. Manufacturing industries have to address the requirements of the government in relation to energy saving and ecologically sustainable products. These industries are also concerned with energy and material usage due to their rising costs. Therefore industries have to find solutions that can support environmental preservation yet maintain competitiveness in the market. Welding, a major manufacturing process, consumes a great deal of material and energy. It is a crucial process in improving a product’s life-cycle cost, strength, quality and reliability. Factors which lead to weld related inefficiencies have to be effectively managed, if industries are to meet their quality requirements and fulfil a high-volume production demand. Therefore it is important to consider some practical strategies in welding process for optimization of energy and material consumption. The main objective of this thesis is to explore the methods of minimizing the ecological footprint of the welding process and methods to effectively manage its material and energy usage in the welding process. The author has performed a critical review of the factors including improved weld power source efficiency, efficient weld techniques, newly developed weld materials, intelligent welding systems, weld safety measures and personnel training. The study lends strong support to the fact that the use of eco-friendly welding units and the quality weld joints obtained with minimum possible consumption of energy and materials should be the main directions of improvement in welding systems. The study concludes that, gradually implementing the practical strategies mentioned in this thesis would help the manufacturing industries to achieve on the following - reduced power consumption, enhanced power control and manipulation, increased deposition rate, reduced cycle time, reduced joint preparation time, reduced heat affected zones, reduced repair rates, improved joint properties, reduced post-weld operations, improved automation, improved sensing and control, avoiding hazardous conditions and reduced exposure of welder to potential hazards. These improvement can help in promotion of welding as a green manufacturing process.

Cost-plus-loss analyses of forest inventory strategies based on kNN-assigned reference sample plot data

Abstract

Inventory of sparse forest populations using adaptive cluster sampling

Abstract

Growth strategies of international companies in the emerging markets of South-East Europe

Työn tarkoituksena oli tutkia niitä tekijöitä jotka ovat vaikuttaneet kansainvälisten yritysten myynnin kasvuun Romaniassa, Bulgariassa, Serbiassa ja Sloveniassa. Tutkimusta varten haastateltiin neljää kansainvälisen yrityksen edustajaa sekä 16 kansainvälisen kaupan ammattilaista. Työn akateemisena viitekehyksenä käytettiin keskeisiä kansainvälisen liiketoiminnan teorioita sekä myynnin strategista viitekehystä. Johtopäätöksenä katsotaan, että menestyvillä yrityksillä on selvä kansainvälistymis-strategia, kansainvälinen organisaatio, konsultoiva myyntityyli ja resursseja investoida koulutukseen. Tarkastelun alla olevista maista etenkin Romaniasta ja Bulgarista löytyy liiketoiminta potentiaalia. Tutkimuksen johtopäätökset perustuvat laadullisiin ja määrällisiin tutkimusmenetelmiin ja ne on tarkoitettu palvemaan Tikkurila Oy:tä. Tutkimustuloksia on myös mahdollista soveltaa laajemmin samanlaisessa tutkimusympäristössä, kunhan tutkittavan liiketoimintaympäristön erityispiirteet ovat otetttu huomioon

The Effectiveness of Currency Hedging Strategies. Case: Imatra Boards Business Unit of Stora Enso Corp.

Tutkimus tarkastelee vaihtoehtoisia termiinisuojaustrategioita metsäteollisuuden alan tulosyksikössä. Jälkitestauksen tarkoituksena on arvioida vaihtoehtoisten strategioiden tuloksellisuutta suojata case-yrityksen kassavirtoja seuraavan kolmen arviointikriteerin avulla: yksittäisten vieraan valuutan määräisten kassavirtojen vaihtelu; koko vieraan valuutan määräisen kassavirran vaihtelu; suojausvoitot ja -tappiot. Tutkimuksen teoreettinen viitekehys tarkastelee yrityksen päätöksentekoa, valuuttariskien suojausprosessia sekä esittelee yrityksen vaihtoehtoisia suojausstrategioita. Tutkimuksen empiirinen aineisto pohjautuu case- yrityksen historiallisiin myyntilukuihin ja on kerätty yrityksen tietojärjestelmästä. Muu tutkimuksessa käytetty dataon kerätty eri tietokannoista. Tutkimuksen tulokset osoittavat, että suojaaminen vähentää kassavirtojen vaihtelua. Suojaamisen taloudelliset tulokset ovat kuitenkin erittäin riippuvaisia valitusta suojausstrategiasta, joka voi johtaa merkittäviin suojausvoittoihin, mutta yhtä hyvin myos merkittäviin tappioihin. Johdon näkemykset ja riskitoleranssi määrittelevät mitä strategiaa yrityksessä tullaan viime kädessä noudattamaan.

Magazine publishers and their online strategies

It seems as if magazine publishers have only haphazardly listed multiple goals for their websites, and have not carefully reflectedon how to achieve them. We present a framework for defining a magazine's onlinestrategy based on previous studies and on secondary data from the industry. We identify three steps in the strategy process. The first is to determine whether the magazine would actually benefit from online presence: although most magazines will never make money from their websites, a web presence may still be justified. The second step is to choose an optimal online strategy that matches the magazine's competitive strategy. Finally, we argue that magazine publishers should carefully consider to what extent they should allow their readers to be involvedin the web pages. This interactivity could be seen as a key factor in exploiting the unique nature of the Internet. It is our understanding that virtual communities could, at best, be a way of creating more value for a magazine's readers, advertisers and editors, alike. We formulate a typology of five different onlinebusiness concepts for magazines based on these three strategic steps.

Artificially Intelligent and Adaptive Methods for Prediction and Analysis of Superheater Fireside Corrosion in Fluidized Bed Boilers

Superheater corrosion causes vast annual losses for the power companies. With a reliable corrosion prediction method, the plants can be designed accordingly, and knowledge of fuel selection and determination of process conditions may be utilized to minimize superheater corrosion. Growing interest to use recycled fuels creates additional demands for the prediction of corrosion potential. Models depending on corrosion theories will fail, if relations between the inputs and the output are poorly known. A prediction model based on fuzzy logic and an artificial neural network is able to improve its performance as the amount of data increases. The corrosion rate of a superheater material can most reliably be detected with a test done in a test combustor or in a commercial boiler. The steel samples can be located in a special, temperature-controlled probe, and exposed to the corrosive environment for a desired time. These tests give information about the average corrosion potential in that environment. Samples may also be cut from superheaters during shutdowns. The analysis ofsamples taken from probes or superheaters after exposure to corrosive environment is a demanding task: if the corrosive contaminants can be reliably analyzed, the corrosion chemistry can be determined, and an estimate of the material lifetime can be given. In cases where the reason for corrosion is not clear, the determination of the corrosion chemistry and the lifetime estimation is more demanding. In order to provide a laboratory tool for the analysis and prediction, a newapproach was chosen. During this study, the following tools were generated: · Amodel for the prediction of superheater fireside corrosion, based on fuzzy logic and an artificial neural network, build upon a corrosion database developed offuel and bed material analyses, and measured corrosion data. The developed model predicts superheater corrosion with high accuracy at the early stages of a project. · An adaptive corrosion analysis tool based on image analysis, constructedas an expert system. This system utilizes implementation of user-defined algorithms, which allows the development of an artificially intelligent system for thetask. According to the results of the analyses, several new rules were developed for the determination of the degree and type of corrosion. By combining these two tools, a user-friendly expert system for the prediction and analyses of superheater fireside corrosion was developed. This tool may also be used for the minimization of corrosion risks by the design of fluidized bed boilers.

Effects of winter feeding strategies with alternative feeds on the performance of mature suckler cows and their progeny

Selostus: Tasaruokinnan ja vaihtoehtoisten rehujen soveltuvuus emolehmien talvikauden ruokintaan