IFRS and Asymmetrical Information: Empirical Evidence from the Finnish Stock Markets

Tutkimuksen tavoitteena on selvittää kansainvälisiin tilinpäätösstandardeihin siirtymisen vaikutuksia epäsymmetriseen informaatioon Suomen osake-markkinoilla. Suomalaisten tilinpäätöskäytäntöjen ja kansainvälisten standardien eroja on selvitetty ensin laadullisin menetelmin,jonka jälkeen on tehty asymmetrisen informaation markkinapohjaisiin mittareihinperustuva kvantitatiivinen tutkimus. Yleisiin eroavaisuuksiin liittyvän selvityksen lisäksi on tutkittu erikseen erityisesti standardimuutoksen vaikutusta älylliseen pääomaan liittyvään informaation asymmetriaan. Empiirisessä osiossa älyllisen pääoman epäsuoraksi mitaksi on valittu kehitys- ja tutkimusmenojen suhde taseen loppusummaan. Kuten oletus oli, sekä laadullisen että empiirisen osion tulokset viittaavat siihen, että IFRS:n myötä informaatioympäristö on parantunut. Uudet standardit vaativat laajempaa ja tarkempaa informaation julkaisua liittyen älylliseen pääomaan, mikä ei ole kuitenkaan havaittavissa valituissa mittareissa

Magnetization studies of polystyrene/multiwall carbon nanotube composite films

Lappeenranta University of Technology School of Technology Technical Physics Evgenii Zhukov MAGNETIZATION STUDIES OF POLYSTYRENE/MULTIWALL CARBON NANOTUBE COMPOSITE FILMS Master’s thesis 2015 55 pages, 41 pictures, 9 Tables. Examiners: Professor Erkki Lähderanta D.Sc. Ivan Zakharchuk Keywords: polystyrene, multi-walled carbon nanotubes, MWCNT, composite, magnetization, SQUID. In this thesis magnetic properties of polystyrene/multiwall carbon nanotube (MWCNT) composites are investigated with Quantum Design SQUID magnetometer (MPMS XL). The surface of the composite films is studied via BRUKER Multimode 8 Atomic Force Microscope, as well. The polystyrene/MWCNT composites have been prepared by the group of professor Okotrub (Physics Chemistry of Nanomaterials laboratory, Nikolaev Institute of Inorganic Chemistry, Russia). The composite films have been prepared by solution processing and stretching method. The approximate length and inner diameter of the MWCNTs used in fabrication are 260 μm and 10 nm, respectively. The content of MWCNTs is 1 and 2.5 contents percent (wt%) for studied samples. The stretching of the samples is 30% for samples with 1 and 2.5 wt% content, and one sample with 1 wt% loading of MWCNTs is 100% stretched. MWCNTs aligned perpendicular to a silicon substrate are used as a reference sample. The magnetization field dependencies of the samples exhibit hysteresis behavior. The values of saturation magnetization of composite films are much less compared to that of the reference sample. The saturation magnetization coercitivity field value drops with decrease of MWCNT content. At high magnetic fields strong presence of diamagnetism is observed. Measurements in magnetic field parallel and perpendicular to the composite plate display anisotropy with respect to the direction of stretching. Temperature dependences of magnetization for all samples display difference between zero-field cooled and field-cooled curves of magnetization. This divergence confirms the presence of magnetic interactions in the material. The atomic force microscopy study of the composites’ surfaces revealed that they are relatively smooth and the nanotubes are aligned with the axis of stretching to some extent. 

On site measurements of DC link electrolytic capacitor bank of frequency converter using constant DC magnetization of the motor

Preventive maintenance of frequency converters has been based on pre-planned replace-ment of wearing or ageing components. Exchange intervals follow component life-time expectations which are based on empirical knowledge or schedules defined by manufac-turer. However, the lifetime of a component can vary significantly, because drives are used in very different operating environments and applications. The main objective of the research was to provide information on methods, i.e. how in-verter's operating condition can be measured reliably under field conditions. At first, the research focused on critical components such as current transducers, IGBTs and DC link capacitor bank, because these aging have already been identified. Of these, the DC link capacitor measurement method was selected for closer examination. With this method, the total capacitance and its total series resistance can be measured. The suitability of the measuring procedure was estimated on the basis of practical measurements. The research was made by using so called triangulation method, including a literature review, simulations and practical measurements. Based on the results, the new measu-rement method seems suitable with some reservations to practical measurements. How-ever, the measuring method should be further developed in order to improve its reliability.

Torque vibration model of axial-flux surface-mounted permanent magnet synchronous machine

In order that the radius and thus ununiform structure of the teeth and otherelectrical and magnetic parts of the machine may be taken into consideration the calculation of an axial flux permanent magnet machine is, conventionally, doneby means of 3D FEM-methods. This calculation procedure, however, requires a lotof time and computer recourses. This study proves that also analytical methods can be applied to perform the calculation successfully. The procedure of the analytical calculation can be summarized into following steps: first the magnet is divided into slices, which makes the calculation for each section individually, and then the parts are submitted to calculation of the final results. It is obvious that using this method can save a lot of designing and calculating time. Thecalculation program is designed to model the magnetic and electrical circuits of surface mounted axial flux permanent magnet synchronous machines in such a way, that it takes into account possible magnetic saturation of the iron parts. Theresult of the calculation is the torque of the motor including the vibrations. The motor geometry and the materials and either the torque or pole angle are defined and the motor can be fed with an arbitrary shape and amplitude of three-phase currents. There are no limits for the size and number of the pole pairs nor for many other factors. The calculation steps and the number of different sections of the magnet are selectable, but the calculation time is strongly depending on this. The results are compared to the measurements of real prototypes. The permanent magnet creates part of the flux in the magnetic circuit. The form and amplitude of the flux density in the air-gap depends on the geometry and material of the magnetic circuit, on the length of the air-gap and remanence flux density of the magnet. Slotting is taken into account by using the Carter factor in the slot opening area. The calculation is simple and fast if the shape of the magnetis a square and has no skew in relation to the stator slots. With a more complicated magnet shape the calculation has to be done in several sections. It is clear that according to the increasing number of sections also the result will become more accurate. In a radial flux motor all sections of the magnets create force with a same radius. In the case of an axial flux motor, each radial section creates force with a different radius and the torque is the sum of these. The magnetic circuit of the motor, consisting of the stator iron, rotor iron, air-gap, magnet and the slot, is modelled with a reluctance net, which considers the saturation of the iron. This means, that several iterations, in which the permeability is updated, has to be done in order to get final results. The motor torque is calculated using the instantaneous linkage flux and stator currents. Flux linkage is called the part of the flux that is created by the permanent magnets and the stator currents passing through the coils in stator teeth. The angle between this flux and the phase currents define the torque created by the magnetic circuit. Due to the winding structure of the stator and in order to limit the leakage flux the slot openings of the stator are normally not made of ferromagnetic material even though, in some cases, semimagnetic slot wedges are used. In the slot opening faces the flux enters the iron almost normally (tangentially with respect to the rotor flux) creating tangential forces in the rotor. This phenomenon iscalled cogging. The flux in the slot opening area on the different sides of theopening and in the different slot openings is not equal and so these forces do not compensate each other. In the calculation it is assumed that the flux entering the left side of the opening is the component left from the geometrical centre of the slot. This torque component together with the torque component calculated using the Lorenz force make the total torque of the motor. It is easy to assume that when all the magnet edges, where the derivative component of the magnet flux density is at its highest, enter the slot openings at the same time, this will have as a result a considerable cogging torque. To reduce the cogging torquethe magnet edges can be shaped so that they are not parallel to the stator slots, which is the common way to solve the problem. In doing so, the edge may be spread along the whole slot pitch and thus also the high derivative component willbe spread to occur equally along the rotation. Besides forming the magnets theymay also be placed somewhat asymmetric on the rotor surface. The asymmetric distribution can be made in many different ways. All the magnets may have a different deflection of the symmetrical centre point or they can be for example shiftedin pairs. There are some factors that limit the deflection. The first is that the magnets cannot overlap. The magnet shape and the relative width compared to the pole define the deflection in this case. The other factor is that a shifting of the poles limits the maximum torque of the motor. If the edges of adjacent magnets are very close to each other the leakage flux from one pole to the other increases reducing thus the air-gap magnetization. The asymmetric model needs some assumptions and simplifications in order to limit the size of the model and calculation time. The reluctance net is made for symmetric distribution. If the magnets are distributed asymmetrically the flux in the different pole pairs will not be exactly the same. Therefore, the assumption that the flux flows from the edges of the model to the next pole pairs, in the calculation model from one edgeto the other, is not correct. If it were wished for that this fact should be considered in multi-pole pair machines, this would mean that all the poles, in other words the whole machine, should be modelled in reluctance net. The error resulting from this wrong assumption is, nevertheless, irrelevant.

ADSL-linjan fyysisen kerroksen testauksen automatisointi

ADSL (Asymmetrical Digital Subsciber Line) on puhelinkaapelia siirtotienä käyttävä nopea Internet-liityntäteknologia, joka on yleistynyt viime vuosina kuluttajamarkkinoilla. Analoginen puhelinverkko on alun perin tarkoitettu puheen siirtoon 0-4kHz:n äänitaajuuskanavalla, mikä aiheuttaa rajoitteita datasiirtoon ylemmillä taajuuksilla. Puhelinverkkojen rakenne vaihtelee alueittain sisältäen erilaisia datasiirtoa häiritseviä tekijöitä. Tämän vuoksi ADSL-päätelaitteilta vaaditaan sopeutumiskykyä vaativiinkin olosuhteisiin. Nykyiset ADSL-standardit eivät vaadi päätelaitteilta riittävää suorituskykyä, jotta luotettava tiedonsiirto onnistuisi myös huonoissa verkko-olosuhteissa. Epäkohdan korjaamiseksi DSL Forum on kehittänyt yhdessä laitevalmistajien, tietoliikenneoperaattoreiden ja komponenttivalmistajien kanssa ADSL-päätelaitteiden yhteensopivuustestaukseen testipaketin nimeltä TR-048. Se on kattava joukko tarkkaan kuvattuja testejä, joissa keskitytään enimmäkseen fyysisen kerroksen testaamiseen. TR-048:aa ei vaadita vielä nykyisissä ADSL-standardeissa, mutta yksityiset laboratoriot ja laitetoimittajat ovat vähitellen ottamassa sitä käyttöön. Tämän työn keskeisenä tavoittena oli tehdä sovellus, jolla automatisoitiin suurin osa TR-048:n sisältämien ADSL-linjan fyysisen kerroksen testeistä. Valmiilla sovelluksella ajetun testikierroksen perusteella arvioitiin sovelluksesta saatua hyötyä ja tuotekehitysvaiheessa olevan Nokia D500 tilaajasolmun suorituskykyä. Työn teoriaosassa esitellään ADSL-teknologiaa ja ADSL-lähetin-vastaanottimen loogista toimintaa.

Omistus, kontrolli ja päämies-agentti- ongelmat osakeyhtiössä

Tutkielman tavoitteena on selvittää osakeyhtiön määräysvaltasuhteet ja miten päämies-agentti- ongelmat vaikeuttavat määräysvallan käyttöä. Tutkimusmetodi on lainopillinen ja lähestyminen aiheeseen tapahtuu sekä yhtiöoikeudellisesta, että oikeustaloustieteellisestä näkökulmasta. Aineistona tutkielmassa käytetään lähinnä voimassa olevaa lainsäädäntöä ja oikeuskirjallisuutta. Päämies-agentti- ongelmalla tarkoitetaan osakeyhtiössä määräysvallan osittaista luisumista omistajalta (päämies) yritysjohdolle (agentti) tai vähemmistöomistajalta (päämies) kontrolloivalle omistajalle (agentti). Tärkeimpiä ongelman lähteitä ovat epäsymmetrinen informaatio ja intressiristiriidat yhtiön johdon ja omistajien välillä tai toisaalta yhtiötä lähellä olevien omistajien ja muiden omistajien välillä. Epäsymmetrinen informaatio luo osaltaan puitteet agenttitahojen opportunistiselle käyttäytymiselle. Ratkaisuja päämies-agentti- ongelmiin ovat ennen kaikkea päämiestahoja suojaava lainsäädäntö ja ulkoiset yritysjohtajien käyttäytymistä ohjaavat keinot, kuten erilaiset kannustinjärjestelmät ja hyvät hallintotavat. Kontrolloivien omistajien käyttäytymistä on puolestaan vaikea ohjata ja erilaisilla määräysvaltaa keskittävillä omistusrakenteilla onkin taipumus voimistaa päämies-agentti- ongelmien vaikutusta. Erityisiä tilanteita osaltaan luovat myös luonteiltaan erilaiset omistajatahot, kuten institutionaaliset omistajat.

Developing of AC magnetometer and investigation of magnetic properties of LSMO

In this work AC magnetometer was developed and primary test measurements were performed for temperature range from 77 K up to 350 K in frequency range from 1 kHz up to 20 kHz. In the course of the present work dependencies of magnetization on temperature for Lao7Sr03Mni _yFeyO3 with y = 0.15, 0.20, 0.25 were obtained in DC magnetic field using SQUID magnetometer and in AC magnetic field using the developed AC magnetometer. Lai.XSrXMnO3 (LSMO) compounds belong to the class of Mn perovskites, which demonstrate very high degree of spin polarization. These materials are of great importance for nowadays applications in spintronics, where spin polarized electron transport is used. Spin glass like behavior was found as a characteristic feature of these solid solutions with the freezing temperature in the range 65 — 210 K.

Magnetic and transport properties of InGaAs quantum wells with Mn

In the present work structural, magnetic and transport properties of InGaAs quantum wells (QW) prepared by MBE with an remote Mn layer are investigated. By means of high-resolution X-ray diffractometry the structure of the samples is analyzed. It is shown that Mn ions penetrate into the QW. Influence of the thickness of GaAs spacer and annealing at 286 ºС on the properties of the system is shown. It is shown that annealing of the samples led to Mn activation and narrowing of the Mn layer. Substantial role of 2D holes in ferromagnetic ordering in Mn layer is shown. Evidence for that is observation of maximum at 25 – 55 K on the resistivity temperature dependence. Position of maximum, which is used for quantitative assessment of the Curie temperature, correlates with calculations of the Curie temperature for structures with indirect interaction via 2D holes’ channel. Dependence of the Curie temperature on the spacer thickness shows, that creation of applicable spintronic devices needs high-precision equipment to manufacture extra fine structures. The magnetotransport measurements show that charge carrier mobility is very low. This leads to deficiency of the anomalous Hall effect. At the same time, magnetic field dependences of the magnetization at different temperatures demonstrate that systems are ferromagnetically ordered. These facts, most probably, give evidence of presence of the ferromagnetic MnAs clusters.

Magnetic and transport properties of II-V diluted magnetic semiconductors doped with manganese and nickel

This thesis is devoted to investigations of three typical representatives of the II-V diluted magnetic semiconductors, Zn1-xMnxAs2, (Zn1-xMnx)3As2 and p-CdSb:Ni. When this work started the family of the II-V semiconductors was presented by only the compounds belonging to the subgroup II3-V2, as (Zn1-xMnx)3As2, whereas the rest of the materials mentioned above were not investigated at all. Pronounced low-field magnetic irreversibility, accompanied with a ferromagnetic transition, are observed in Zn1-xMnxAs2 and (Zn1-xMnx)3As2 near 300 K. These features give evidence for presence of MnAs nanosize magnetic clusters, responsible for frustrated ground magnetic state. In addition, (Zn1-xMnx)3As2 demonstrates large paramagnetic response due to considerable amount of single Mn ions and small antiferromagnetic clusters. Similar paramagnetic system existing in Zn1-xMnxAs2 is much weaker. Distinct low-field magnetic irreversibility, accompanied with a rapid saturation of the magnetization with increasing magnetic field, is observed near the room temperature in p- CdSb:Ni, as well. Such behavior is connected to the frustrated magnetic state, determined by Ni-rich magnetic Ni1-xSbx nanoclusters. Their large non-sphericity and preferable orientations are responsible for strong anisotropy of the coercivity and saturation magnetization of p- CdSb:Ni. Parameters of the Ni1-xSbx nanoclusters are estimated. Low-temperature resistivity of p-CdSb:Ni is governed by a hopping mechanism of charge transfer. The variable-range hopping conductivity, observed in zero magnetic field, demonstrates a tendency of transformation into the nearest-neighbor hopping conductivity in non-zero magnetic filed. The Hall effect in p-CdSb:Ni exhibits presence of a positive normal and a negative anomalous contributions to the Hall resistivity. The normal Hall coefficient is governed mainly by holes activated into the valence band, whereas the anomalous Hall effect, attributable to the Ni1-xSbx nanoclusters with ferromagnetically ordered internal spins, exhibits a low-temperature power-law resistivity scaling.

Homogeneous Assays for Simplified Screening of HLA-conferred Genetic Disease Risk

The increasing incidence of type 1 diabetes has led researchers on a quest to find the reason behind this phenomenon. The rate of increase is too great to be caused simply by changes in the genetic component, and many environmental factors are under investigation for their possible contribution. These studies require, however, the participation of those individuals most likely to develop the disease, and the approach chosen by many is to screen vast populations to find persons with increased genetic risk factors. The participating individuals are then followed for signs of disease development, and their exposure to suspected environmental factors is studied. The main purpose of this study was to find a suitable tool for easy and inexpensive screening of certain genetic risk markers for type 1 diabetes. The method should be applicable to using whole blood dried on sample collection cards as sample material, since the shipping and storage of samples in this format is preferred. However, the screening of vast sample libraries of extracted genomic DNA should also be possible, if such a need should arise, for example, when studying the effect of newly discovered genetic risk markers. The method developed in this study is based on homogeneous assay chemistry and an asymmetrical polymerase chain reaction (PCR). The generated singlestranded PCR product is probed by lanthanide-labelled, LNA (locked nucleic acid)-spiked, short oligonucleotides with exact complementary sequences. In the case of a perfect match, the probe is hybridised to the product. However, if even a single nucleotide difference occurs, the probe is bound instead of the PCR product to a complementary quencher-oligonucleotide labelled with a dabcyl-moiety, causing the signal of the lanthanide label to be quenched. The method was applied to the screening of the well-known type 1 diabetes risk alleles of the HLA-DQB1 gene. The method was shown to be suitable as an initial screening step including thousands of samples in the scheme used in the TEDDY (The Environmental Determinants of Diabetes in the Young) study to identify those individuals at increased genetic risk. The method was further developed into dry-reagent form to allow an even simpler approach to screening. The reagents needed in the assay were in dry format in the reaction vessel, and performing the assay required only the addition of the sample and, if necessary, water to rehydrate the reagents. This allows the assay to be successfully executed even by a person with minimal laboratory experience.

Magnetic and transport properties of LaMnO3+δ, La1-xCaxMnO3, La1-xCaxMn1-yFeyO3 and La1-xSrxMn1-yFeyO3

Interest to hole-doped mixed-valence manganite perovskites is connected to the ‘colossal’ magnetoresistance. This effect or huge drop of the resistivity, ρ, in external magnetic field, B, attains usually the maximum value near the ferromagnetic Curie temperature, TC. In this thesis are investigated conductivity mechanisms and magnetic properties of the manganite perovskite compounds LaMnO3+, La1-xCaxMnO3, La1-xCaxMn1-yFeyO3 and La1- xSrxMn1-yFeyO3. When the present work was started the key role of the phase separation and its influence on the properties of the colossal magnetoresistive materials were not clear. Our main results are based on temperature dependencies of the magnetoresistance and magnetothermopower, investigated in the temperature interval of 4.2 - 300 K in magnetic fields up to 10 T. The magnetization was studied in the same temperature range in weak (up to 0.1 T) magnetic fields. LaMnO3+δ is the parent compound for preparation of the hole-doped CMR materials. The dependences of such parameters as the Curie temperature, TC, the Coulomb gap, Δ, the rigid gap, γ, and the localization radius, a, on pressure, p, are observed in LaMnO3+δ. It has been established that the dependences above can be interpreted by increase of the electron bandwidth and decrease of the polaron potential well when p is increased. Generally, pressure stimulates delocalization of the electrons in LaMnO3+δ. Doping of LaMnO3 with Ca, leading to La1-xCaxMnO3, changes the Mn3+/Mn4+ ratio significantly and brings an additional disorder to the crystal lattice. Phase separation in a form of mixture of the ferromagnetic and the spin glass phases was observed and investigated in La1- xCaxMnO3 at x between 0 and 0.4. Influence of the replacement of Mn by Fe is studied in La0.7Ca0.3Mn1−yFeyO3 and La0.7Sr0.3Mn1−yFeyO3. Asymmetry of the soft Coulomb gap and of the rigid gap in the density of localized states, small shift of the centre of the gaps with respect to the Fermi level and cubic asymmetry of the density of states are obtained in La0.7Ca0.3Mn1−yFeyO3. Damping of TC with y is connected to breaking of the double-exchange interaction by doping with Fe, whereas the irreversibility and the critical behavior of the magnetic susceptibility are determined by the phase separation and the frustrated magnetic state of La0.7Sr0.3Mn1−yFeyO3.

Lärande som text : en dramapedagogiskt förankrad läsning av det kroppsliga, rumsliga och retoriska i kunskapsbildande processer

My presupposition, that learning at some level deals with life praxis, is expressed in four metaphors: space, time, fable and figure. Relations between learning,knowledge building and meaning making are linked to the concept of personal knowledge. I present a two part study of learning as text in a drama pedagogical rooted reading where learning is framed as the ongoing event, and knowledge, as the product of previous processes, is framed as culturally formed utterances. A frame analysis model is constructed as a topological guide for relations between the two concepts learning and knowledge. It visualises an aesthetic understanding, rooted in drama pedagogical comprehension. Insight and perception are linked in an inner relationship that is neither external nor identical. This understanding expresses the movement "in between" connecting asymmetrical and nonlinear features of human endeavour and societal issues. The performability of bodily and oral participation in the learning event in a socio-cultural setting is analysed as a dialogised text. In an ethnographical case study I have gathered material with an interest for the particular. The empirical material is based on three problem based learning situations in a Polytechnic setting. The act of transformation in the polyphony of the event is considered as a turning point in the narrative employment. Negotiation and figuration in the situation form patterns of the space for improvisation (flow) and tensions at the boundaries (thresholds) which imply the logical structure of transformation. Learning as a dialogised text of "yes" and "no", of structure and play for the improvised, interrelate in that movement. It is related to both the syntagmic and the paradigmatic forms of thinking. In the philosophical study, forms of understanding are linked to the logical structure of transformation as a cultural issue. The classical rhetorical concepts of Logos, Pathos, Ethos and Mythos are connected to the multidimensional rationality of the human being. In the Aristotelian form of knowledge, phronesis,a logic structure of inquiry is recognised. The shifting of perspectives between approaches, the construction of knowledge as context and the human project of meaning making as a subtext, illuminates multiple layers of the learning text. In an argumentation that post-modern apprehension of knowledge, emphasising contextual and situational values, has an empowering impact on learning, I find pedagogical benefits. The dialogical perspective has opened lenses that manage to hold in aesthetic doubling the individual action of inquiry and the stage with its cultural tools in a three dimensional reading.

Det vårdande samtalet

Syftet med studien är att utgående från ett vårdvetenskapligt perspektiv utveckla en teori för det vårdande samtalet, speciellt som det gestaltar sig i den psykiatriska vårdkontexten. Avsikten är primärt att tillföra den kliniska vårdvetenskapen kunskaper om hur samtal mellan vårdare och patienter kan lindra lidande. Studien tar sin utgångspunkt i ett vårdvetenskapligt perspektiv som har sina rötter i Katie Erikssons caritativa vårdteori. Den metodologiska ansatsen är hermeneutisk. Forskningen har genomförts i form av fem delstudier som publicerats i internationella vetenskapliga tidskrifter. Metoderna som använts är: 1) en fenomenologisk hermeneutisk ansats för att beskriva det vårdande samtalet som det skildras av sjuksköterskor och patienter i intervjuer, 2) kvalitativ forskningssyntes av studier rörande begreppen närvaro, beröring och lyssnande, 3) kvalitativ forskningssyntes av studier rörande begreppen narrativer, berättelser, mening och förståelse, 4) en hermeneutisk ansats inspirerad av Paul Ricoeurs hermeneutik för att undersöka hur psykiatriska patienter i samtal med vårdare berättar om lidande, 5) en hermeneutisk analys av de etiska fundamenten för ett vårdande samtal i ljuset av Paul Ricoeurs etik. Resultaten från de fem delstudierna formar utgångspunkten för en teori för hur ett vårdande samtal kan tolkas. Teorin består av tre aspekter, den relationella, den narrativa, och den etiska, vilka undersökts i delstudierna. I den relationella aspekten kan vårdaren genom att lyssna, beröra och vara med-varande skapa en närvaro. Genom vårdarens gåva av sin närvaro, d v s att vara tillgänglig och till förfogande med hela sitt väsen, visas möjligheten till ett möte med patienten utan roller och inlärda repliker. När patienten kan besvara denna gåva med en inbjudan att dela något av sin värld, skapas en förbindelse i vilken patienten kan dela sitt lidande och sin värld med vårdaren. Den narrativa aspekten gestaltas i samtalet som patientens berättelse om sitt lidande. Lidandeberättelsen tar sin början i den fasad som patienten skyddar sig mot lidande och skam med. Frågan om varför patienten lider banar vägen både för en ny förståelse av fasaden och också för upplevelsen av en vändpunkt när fasadens skydd överges, vilket leder till en upplevelse av mening-i-lidandet. Artikuleringen av berättelsens poäng, mening-med-lidandet innebär dels en ny tolkning och förståelse för de förhållanden som rådde vid berättelsens början, dels de nya preferenser för hur patienten vill leva sitt liv som vuxit fram. Den etiska aspekten gestaltas i en relation som på grund av patientens lidande och vårdarens medlidande är asymmetrisk, men omfattar en ömsesidig respekt. Genom caritas skapar vårdaren ett utrymme där patienten kan (åter)upprätta sin självaktning, autonomi och sitt ansvar och därmed skapa möjligheter för ett gott liv.

Mössbauer spectra of iron oxides in the bulk and nanocrystalline states

Magnetic nanoparticles are very important in modern industry. These particles are used in many different spheres of life. Nanoparticles have unusual physical and chemical properties connected both with quantum dimensional effects and with the increased role of the surface atoms. Most clearly the difference between the properties of bulk materials and nanoparticles can be seen in the magnetic properties of these materials. The most typical magnetic properties of nanomaterials are superparamagnetism with the size of the cluster from 1 to 10 nm; single-domain magnetic state of nanoclusters and nanostructures up to 20 nm; magnetization processes connected with magnetic cluster ordering and with its forms and sizes; quantum magnetic tunneling effects when magnetization changes by jumps and giant magnetoresistance effects. For research of the magnetic properties of iron-containing nanostructures, it is convenient to apply Mӧssbauer spectroscopy. In this work a number of nano-sized samples of iron oxides were examined by Mössbauer spectroscopy. The Mössbauer spectra of nanoparticles with various sizes were obtained. Mössbauer spectra of iron oxide nanoparticles were compared with the spectra of bulk samples. It was shown how the spectra of iron oxide nanoparticles change depending on the particle sizes.