Best Practices of International Double Master's Degree Programmes: Comparative Study on Finnish and Russian Universities

The purpose of this report is to disseminate the best practices of double degree programmes’ organization, implementation and development between Russian and European universities. The findings reveal good developments in the field of double degree cooperation between Russian and European universities and a high motivation from both parties. The report depicts different models of building a joint curriculum and organizing academic mobility. Foreign language skills improvement for students and university staff, involvement of international companies, and joint strategy and actions in marketing and quality assurance are some redevelopments points recommended in the report.

Best practices of international double degree programmes. Case of Russian and European universities

The purpose of the Master’s thesis research is to study and disseminate the best practices of international double Master’s degree programmes organization, implementation and development. The given research is focused on two main areas: motivation of higher education institutions to start double degree programmes and best practices of double degree programme design and implementation from the perspective of building joint curriculum and organizing balanced mobility and development of existing programmes in terms of increasing their quality and attractiveness. This is a case study of the double degree programmes between Russian and European universities. The study findings reveal good developments in the field of double degree cooperation between Russian and European universities and a high motivation from both parties. The research depicts different models of building a joint curriculum and organizing academic mobility. The following areas could be outlined as development points for double degree programmes: - Personal interest and commitment of organizers of double degree programmes; - Comprehensive agreement between partners on different aspects and practicalities of the double degree programme implementation; - Promotion towards more balanced student participation and two-way mobility; - Foreign language skills improvement for students and university staff; - Joint strategy and actions in marketing and quality assurance; - Involvement of international companies; - Wider usage of e-learning technology.

Enabling Change in Universities: Enhancing Education for Sustainable Development with Tools for Quality Assurance

Enabling Change in Universities: Enhancing Education for Sustainable Development with Tools for Quality Assurance This thesis deals with enabling change in universities, more explicitly enhancing education for sustainable development with tools for quality assurance. Change management is a discipline within management that was developed in the 1980s because business changed from being predictable to unpredictable. The PEST mnemonic is a method to categorize factors enabling change; such as political, economic, socio-cultural and technological factors, which all affect higher education. A classification of a change, in either hard or soft, can help understanding the type of change that an organization is facing. Hard changes are more applied to problems that have clear objectives and indicators, with a known cause of the problem. Soft changes are applied to larger problems that affect the entire organization or beyond it. The basic definition for sustainable development is: the future generations should have similar opportunities as the previous. The UN has set as a global goal an integration of education for sustainable development (ESD) at all levels of education during 2005- 2014. The goal is set also in universities, the graduates of which are future leaders for all labor markets. The objective for ESD in higher education is that graduates obtain the competence to take economic, social and environmental costs and benefits into account when making decisions. Knowledge outcomes should aim for systematic and holistic thinking, which requires cross disciplinary education. So far, the development of ESD has not achieved its goals. The UN has identified a need for more transdisclipnary research in ESD. A joint global requirement for universities is quality assurance, the aim of which is to secure and improve teaching and learning. Quality, environmental and integrated management systems are used by some universities for filling the quality assurance requirements. The goal of this thesis is to open up new ways for enhancing ESD in universities, beyond the forerunners; by exploring how management systems could be used as tools for promoting ESD. The thesis is based on five studies. In the first study, I focus on if and how tools for quality assurance could be benefitted for promoting ESD. It is written from a new perspective, the memetic, for reaching a diversity of faculty. A meme is an idea that diffuses from brain to brain. It can be applied for cultural evolution. It is a theory that is based on the evolutionary theory by Darwin, applied for social sciences. In the second Paper, I present the results from the development of the pilot process model for enhancing ESD with management systems. The development of the model is based on a study that includes earlier studies, a survey in academia and an analysis of the practice in 11 universities in the Nordic countries. In the third study, I explore if the change depends on national culture or if it is global. It is a comparative study on both policy and implementation level, between the Nordic countries and China. The fourth study is a single case study based on change management. In this study, I identify what to consider in order to enable the change: enhancing ESD with tools for quality assurance in universities. In the fifth Paper, I present the results of the process model for enhancing ESD with management systems. The model was compared with identified drivers and barriers for enhancing ESD and for implementing management systems. Finally, the process model was piloted and applied for identifying sustainability aspects in curricula. Action research was chosen as methodology because there are not already implemented approaches using quality management for promoting ESD, why the only way to study this is to make it happen. Another reason for choosing action research is since it is essential to involve students and faculty for enhancing ESD. Action based research consists of the following phases: a) diagnosing, b) planning action, c) taking action and d) evaluating action. This research was made possible by a project called Education for Sustainable Development in Academia in the Nordic countries, ESDAN, in which activities were divided into these four phases. Each phase ended with an open seminar, where the results of the study were presented. The objective for the research project was to develop a process for including knowledge in sustainable development in curricula, which could be used in the quality assurance work. Eleven universities from the Nordic countries cooperated in the project. The aim was, by applying the process, to identify and publish examples of relevant sustainability aspects in different degree programs in universities in the Nordic countries. The project was partly financed by the Nordic Council of Ministers and partly by the participating pilot universities. Based on the results of my studies, I consider that quality, environmental and integrated management systems can be used for promoting ESD in universities. Relevant sustainability aspects have been identified in different fields of studies by applying the final process model. The final process model was compared with drivers and barriers for enhancing ESD and for implementing management systems in universities and with succeeding with management systems in industry. It corresponds with these, meaning that drivers are taken into account and barriers tackled. Both ESD and management systems in universities could be considered successful memes, which can reflect an effective way of communication among individuals. I have identified that management systems could be used as tools for hard changes and to support the soft change of enhancing ESD in universities with management system. Based on the change management study I have summarized recommendations on what to consider in order to enable the studied change. The main practical implications of the results are that the process model could be applied for assessment, benchmarking and communication of ESD, connected to quality assurance, when applied. This is possible because the information can be assembled in one picture, which facilitates comparison. The memetic approach can be applied for structuring. It is viable to make comparative studies between cultures, for getting insight in special characteristics of the own culture. Action based research is suitable for involving faculty. Change management can be applied for planning a change, which both enhancing ESD and developing management systems are identified to be.

For the Record: DSpace and Academic Accreditation

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Universities as an Insourcing Resource in R&D Operations

Tutkimuksen tavoitteena on arvioida ja analysoida yliopistojen ja yritysten välistä yhteistyötä tutkimus- ja kehitystoiminnassa. Teoriapohjan ja kohdeyrityksen case esimerkin avulla on tarkoitus selvittää kriittiset tekijät yhteistyössä sekä rakentaa tulosten perusteella viitekehys näiden kahden osapuolen yhteistyön onnistumiseksi. Teoriatausta käsittelee osapuolten tärkeimpiä strategioita yhteistyön kannalta, yhteistyön yleisiä ominaisuuksia, vuorovaikutussuhteita niin ympäristöön, toimintoihin kuin osapuoliinkin. Teoriaosuus tukee empiiristä tutkimusta, jossa perehdytään yhteen kansalliseen 3G projektiin Soneran ja Jyväskylän yliopiston välillä. Yrityksen ja yliopiston välinen yhteistyö on hyvin yleistä Suomessa. Motivoivia tekijöitä ovat muun muassa Tekesin kannustava rahoitus ja yhteistyön edullisuus, osapuolten keskittyminen omaan ydinosaamiseensa, tiedon tuotteistuksen ja uusien teorioiden luomisen mahdollisuus, positiiviset vaikutukset markkina-arvoon, imagolliset tekijät sekä varautuminen tulevaisuuden trendeihin.

Application of Open Innovation Paradigm in Small and Medium Enterprises in Russia

The objective of this study is to explore how the Open Innovation paradigm is applied in by small and medium-size enterprises in Russia. The focus of the study is to understand how the processes of research and development and commercialization proceed in these kind of companies and to which extent they apply open innovation principles. Russian leadership makes certain steps for transition from the export of raw materials to an innovative model of economic growth. The research aims to disclose actual impact of these attempts. The closed innovation model and the erosion factors which lead to the destruction of an old one and emergence of new model are described. Features of open innovation implementation and intellectual property rights protection in small and medium enterprises are presented. To achieve the objective, a qualitative case study approach was chosen. Research includes facts and figures, views and opinions of management of studied companies related to innovation process in the company and in Russia in general. The research depicts the features of Open Innovation implementation by SMEs in Russia. A large number of research centers with necessary equipment and qualified personnel allow case companies to use external R&D effectively. They cooperate actively with research institutes, universities and laboratories. Thus, they apply inbound Open Innovation. On the contrary, lack of venture capital, low demand for technologies within the domestic market and weak protection of intellectual property limit the external paths to new markets. Licensing-out and creation of spin-off are isolated cases. Therefore, outbound Open Innovation is not a regular practice.

Quality, Productivity and Economy in Welding Manufacturing - Case Study: West Africa

This thesis studies quality, productivity and economy in welding manufacturing in West African states such as Ghana, Nigeria and Cameroon. The study consists of two parts: the first part, which forms the theoretical background, reviews relevant literature concerning the metal and welding industries, and measurement of welding quality, productivity and economy. The second part, which is the empirical part, aims to identify activities in the metal manufacturing industries where welding is extensively used and to determine the extent of welding quality, productivity and economy measurements in companies operating in the metal manufacturing industries. Additionally, the thesis aims to identify challenges that companies face and to assess the feasibility of creating a network to address these issues. The research methods used in the empirical part are the case study (qualitative) method and the survey (quantitative) method. However, the case study method was used to elicit information from companies in Ghana, while the survey method was used to elicit information from companies in Nigeria and Cameroon. The study considers important areas that contribute to creating awareness and understanding of the current situation of the welding industry in West Africa. These areas include the metal manufacturing industrial sector, metal products manufactured, metal production and manufacturing systems deployed, welding quality, productivity and economy measurement systems utilized, equipment and materials on the markets, general challenges facing companies in welding operations, welding technology programs and research in local universities, and SWOT analysis of the various West African states. The notable findings indicate that majority of the companies operate in the constructionindustrial sector. Also, majority of the companies are project manufacturing oriented, thus provide services to customers operating in the growing industries such as the oil and gas, mining, food and the energy industry. In addition, only few companies are certified under standards such as ISO 9001, ISO 3834, and OHSAS 18001. More so, majority of the companies employ manual welding technique, and shielded metal arc welding (SMAW) as the commonly used welding process. Finally, welder salary is about € 300 / month as of June 2013 and the average operations turnover of medium to large companies is about € 5 million / year as at 2012. Based on analysis of the results of the study, it is noted that while welding activities are growing, the availability of cheap labor, the need for company and welder qualification and certification, and the need to manufacture innovative products through developmental projects (transfer of welding expertise and technology) remain as untapped opportunities in the welding industry in the West African states. The study serves as a solid platform for further research and concludes with several recommendations for development of the West African welding industry.

Heading for Open Science: Filling the Knowledge Gap

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Integrating CRIS and repository – an overview of the situation in Finland and in three other Nordic countries

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Flipped classroom technology from teachers’ perspective: implementation experience, barriers and perspectives

Blended learning approaches rise their popularity, however not all professors apply them and find them useful and appropriate. This research focuses on study of flipped classroom arrangement and effectiveness of this concept implementation. The Master’s Thesis explores impact of flipped classroom implementation on resource savings for proffesors. The research is based on the literature review of different education arrangements and results of their implementation, on the survey conducted among proffesors from different Universities and on two experiments of flipped classroom implementation. The results reveal advantages and disadvantages of the concept, professors’ attitude to it and possibility to future research and practice in this field

On the Condition Monitoring of Induction machines

The research of condition monitoring of electric motors has been wide for several decades. The research and development at universities and in industry has provided means for the predictive condition monitoring. Many different devices and systems are developed and are widely used in industry, transportation and in civil engineering. In addition, many methods are developed and reported in scientific arenas in order to improve existing methods for the automatic analysis of faults. The methods, however, are not widely used as a part of condition monitoring systems. The main reasons are, firstly, that many methods are presented in scientific papers but their performance in different conditions is not evaluated, secondly, the methods include parameters that are so case specific that the implementation of a systemusing such methods would be far from straightforward. In this thesis, some of these methods are evaluated theoretically and tested with simulations and with a drive in a laboratory. A new automatic analysis method for the bearing fault detection is introduced. In the first part of this work the generation of the bearing fault originating signal is explained and its influence into the stator current is concerned with qualitative and quantitative estimation. The verification of the feasibility of the stator current measurement as a bearing fault indicatoris experimentally tested with the running 15 kW induction motor. The second part of this work concentrates on the bearing fault analysis using the vibration measurement signal. The performance of the micromachined silicon accelerometer chip in conjunction with the envelope spectrum analysis of the cyclic bearing faultis experimentally tested. Furthermore, different methods for the creation of feature extractors for the bearing fault classification are researched and an automatic fault classifier using multivariate statistical discrimination and fuzzy logic is introduced. It is often important that the on-line condition monitoring system is integrated with the industrial communications infrastructure. Two types of a sensor solutions are tested in the thesis: the first one is a sensor withcalculation capacity for example for the production of the envelope spectra; the other one can collect the measurement data in memory and another device can read the data via field bus. The data communications requirements highly depend onthe type of the sensor solution selected. If the data is already analysed in the sensor the data communications are needed only for the results but in the other case, all measurement data need to be transferred. The complexity of the classification method can be great if the data is analysed at the management level computer, but if the analysis is made in sensor itself, the analyses must be simple due to the restricted calculation and memory capacity.

Opettajan monikulttuurinen työ

Teacher's multicultural work The purpose of the present study is to explore teachers’ conceptions of their work as teachers of multicultural students. Teachers’ experiences of multicultural work and conceptions derived from them are part of the teacher’s multicultural competence which is seen as a key component of the teacher’s multicultural teachership. The teacher’s multicultural competence consists of the teacher’s cultural knowledge, pedagogical skills and experiences and attitudes related to multiculturalism. The teacher’s multicultural competence constitutes the basis on which the teacher implements multicultural education. The foundation for the teacher’s work is laid by laws and decrees, curricula, regulations issued by authorities in charge of the education of immigrant students, resources available and other demands and expectations set by the ambient society. The study was conducted in the city of Turku, Finland. The sample consisted of class teachers who taught both immigrant and majority students. Main objects of study in the theoretical part are the multicultural and pluralistic school and the multicultural teachership. The basic assumption is that the multicultural and pluralistic school forms the frame of activity in which the teacher implements multicultural teaching. The research strategy is based on methodological triangulation. The quantitative part of the study was carried out using a questionnaire typical of survey methods. The questionnaire was returned by 71 teachers. The qualitative part was conducted using theme-based interviews typical of phenomenological philosophical research. Of the total of teachers who returned the questionnaire, twelve (12) teachers were selected for interviews. According to the results, the participating teachers enjoyed their work regardless of the ample extra work caused by the students with immigrant backgrounds. The teachers experienced their work as teachers of multicultural student groups as strenuous, yet challenging. Students with immigrant backgrounds had caused many changes in the teacher’s work. The teachers regarded their multicultural skills as inadequate in relation to the demands of the work. They had not received education related to teaching students with immigrant backgrounds, but they were ready for in-service education. The teachers’ previous attitudes concerning immigrant students had been enforced. Teaching experiences strengthened the earlier, both positive and negative, attitudes. The central problems related to multiculturalism in the teacher’s work were caused by the deficient Finnish skills of the students with immigrant background. This was apparent in both teaching and learning as well as in contacts with parents. The teachers reported on relatively few inclusions of multicultural angles in their teaching. However, they believed that they could aid students with different cultural backgrounds in their integration process. At the same time they felt that their own chances to enhance the students’ cultural identities were slim. On the basis of the interviews conducted in connection with the teacher’s multicultural competence, the teachers were divided into three groups: assimilative, indeterminate and integrating multicultural teachers. The present study provides a strong indication that teachers tend to interpret multiculturalism in narrow terms. School activities, such as Finnish as a second language, first language and religious instruction, which were targeted exclusively at immigrant students were in most cases considered adequate. A holistic, cross-disciplinary, all-inclusive multicultural education that would permeate all school activities remains largely unimplemented.

YmpäristöjärjesteImän kehittäminen kouluissa

Ympäristöasioiden hallintajärjestelmät perustuvat kestävään kehitykseen. Peruslähtökohta ympäristöjärjestelmän käyttöönottoon on joko ideologiassa tai puhtaasti myynnin edistämisessä. Tässä diplomityössä lähestytään ympäristöjärjestelmää ensin yritysten näkökulmasta ja sen jälkeen koulujen ja oppilaitosten näkökulmista. Työn tavoitteina on vastata kysymykseen kuinka kehittää koulujen käyttämää Vihreä lippu ympäristöjärjestelmää entistä paremmaksi, sekä kuinka helpottaa Vihreä lippu ympäristöjärjestelmän käyttöönottoa kouluissa. Tämä tutkimus perustuu ympäristöministeriön rahoittamaan hankkeeseen "Kokemuksia Vihreä lippu ympäristöjärjestelmän käytöstä kouluissa". Hanke toteutettiin syksyn 2008 ja kevään 2009 aikana. Hankkeen tiedot kerättiin sekä kyselyiden että haastattelujen avulla. Tutkimus on luonteeltaan kvantitatiivinen, mutta siinä on myös kvalitatiivisen tutkimuksen elementtejä. Tutkimusmenetelmien yhdistäminen tässä tutkimuksessa lisää selvästi tutkimuksen validiutta. Tutkimuksen johtopaatokset näyttävät, että aivan "kivutta" ympäristöjärjestelmä ei synny kouluihin. Asiaa helpottaa suuresti, jos koulun johtoporras sitoutuu näyttävästi ympäristöjärjestelmään. Johdon sitoutuminen ympäristöjärjestelmään sitouttaa kaikki muut. Käyttöönottoa auttaa myös, jos ympäristöjärjestelmää käytetään johdon työkaluna. Lisaksi koulujen kannattaa olla avoimia kaikille sidosryhmille ja ottaa heitä reippaasti mukaan koulujen normaaliin arkeen. Myös koulujen ulkoinen ja sisäinen viestintä kannattaa ottaa suurennuslasin alle.

Cultural aspects of globalizing university-industry knowledge interaction in China

Previous studies of the local involvement of multinational corporation (MNC) subsidiaries focus on host-country firms and local business partners such as suppliers and customers. The role of host-country universities in the same context of innovation networks is neglected. Furthermore, there are many organizational culture- and knowledge-related differences between universities and companies, and this is likely to pose additional challenges for successful collaboration. Early university-industry (U-I) studies have primarily been limited within a national boundary, being concerned with a single level of culture (i.e., at an organizational level) and one-way knowledge transfer from university to industry. Research on more dynamic knowledge interaction in multinational settings is lacking. This is particularly true in the business context of China. In today’s globalizing and rapidly changing organizations, addressing cultural differences and clashes is an everyday reality, and inter-cultural U-I collaboration is becoming a key asset for gaining global competitiveness. This study deals with Finnish MNC subsidiaries’ research collaboration with Chinese universities. It aims to explore the essence of such U-I collaboration and knowledge interaction, uncovering the deep functioning mechanisms of culture underlying effective collaborative knowledge creation and innovation. The study reviews critically different bodies of literature including knowledge management theories and studies, U-I collaboration and knowledge interaction, and cross-cultural research in terms of organizational knowledge generation and utilization. It adopts a case study strategy with qualitative research methods, and data is collected through in-depth interviews and participant observation. The study presents the following major findings: 1. In the light of a comprehensive analysis of U-I collaboration, an effective matching strategy is proposed, in the assumption that good alignment of knowledge interaction strategies and approaches with their corresponding knowledge type, capability development and research task may greatly enhance the effectiveness of cross-cultural U-I collaboration and knowledge interaction. 2. It is proposed that in the Chinese MNC context more dynamic types of knowledge interaction like knowledge co-creation should be of key concern particularly when dealing simultaneously with multi-disciplinary applied research of human factors and technologies. U-I knowledge interaction, otherwise, pays attention only to the study of one-way technology and knowledge transfer. 3. It is posited that the influence of culture on collaborative knowledge interaction can be studied in a valuable way when knowledge-related variables are simultaneously taken into account. A systematic analysis of the role of knowledge in cross-cultural knowledge interaction could best be approached from multi-aspects of knowledge including not only nature, characteristics and types of knowledge but also the process of knowledge (e.g., intensifications of knowledge interaction). 4. The study demonstrates the significant role of aspects of the host-country culture (e.g., Chinese guanxi) in U-I collaboration and knowledge interaction. This is evident, for instance, in issues related to interpersonal relationships and trust, true interest and the relatedness of the research, mutual commitment and learning, communication intensity and interaction, and awareness of cultural and knowledge-related differences between collaboration partners. Theoretical and practical implications of the findings are suggested and discussed.

Keille yliopiston portit avautuvat? Tutkimus suomalaisiin yliopistoihin ja eri tieteenaloille valikoitumisesta 2000-luvun alussa

Tutkimuksessa tarkastellaan suomalaisiin yliopistoihin valikoitumista 2000-luvun alussa. Tarkastelu pohjautuu yliopistoon hakeneiden, opiskelemaan hyväksyttyjen ja opiskelupaikkaa ilman jääneiden taustojen vertailuun. Tutkimuksen tarkoituksena on selvittää, miten koulutuksellinen tasa-arvo toteutuu opiskelemaan pääsyssä. Erityistä huomiota kiinnitetään sukupuolten, eri-ikäisten, sosiaalisten ryhmien sekä eri alueella asuvien opiskelijavalinnoissa pärjäämiseen. Lisäksi pohditaan, millaiset taustatekijät ovat yhteydessä opiskelemaan pääsyyn ja miten suomalainen yliopistokenttä on lohkoutunut yliopistoittain ja aloittain hakijoiden ja sisään päässeiden taustojen perusteella. Tutkimuksen pääaineistona on henkilöpohjainen rekisteriaineisto, joka on laadittu valtakunnallisen hakijarekisterin (HAREK) ja Tilastokeskuksen yhteistyönä. Aineisto käsittää 40 %:n satunnaisotoksen vuonna 2003 suomalaisiin yliopistoihin hakeneista (N = 55 790). Aineiston muuttujat kuvaavat hakijoiden taustoja, elämäntilannetta, aiempaa koulutusta ja lapsuudenperheen asemaa. Tutkimuksessa hyödynnetään lisäksi kokonaisjoukosta muodostettua taulukkoaineistoa (N = 139 668). Yliopistoihin hakevat eivät ole yhtenäinen ryhmä. Vaikka suurin osa hakijoista oli nuoria, oli joukossa myös varttuneempia hakijoita, jotka olivat ehtineet hankkia koulutusta ja muuta elämänkokemusta. Päävalinnat toimivat siten myös aikuishakijoiden hakuväylänä; erillisvalintoja eivät hyödynnä läheskään kaikki, joilla siihen olisi mahdollisuus. Klusterianalyysin avulla hakijoista voitiin erottaa neljä ryhmää: 1) nuoret ylioppilaat, 2) toisen tutkinnon suorittajat, 3) koulutuspääoman kartuttajat sekä 4) aikuiset lisäkouluttautujat. Opiskelemaan pääsyyn vaikuttavia tekijöitä analysoitiin logistisen regressioanalyysin avulla. Analyysin mukaan hakijan iällä oli muista taustatekijöistä riippumaton vaikutus opiskelemaan pääsyyn niin, että todennäköisyys päästä yliopistoon vähenee hakijan iän kohotessa. Parhaiten opiskelemaan pääsivät kaikkein nuorimmat, alle 20-vuotiaat hakijat, jotka siis useimmiten ovat saman kevään ylioppilaita. Vanhemmille hakijoille oli usein kertynyt jo koulutusta, mutta aiemmat tutkinnot paransivat sisäänpääsyn mahdollisuuksia vain, mikäli ne olivat korkea-asteelta. Alemmilla ammatillisilla tutkinnoilla oli pikemminkin opiskelemaan pääsyä heikentävä vaikutus. Myös se, mitä hakija oli tehnyt ennen valintakokeita, vaikutti sisäänpääsyn mahdollisuuksiin. Parhaiten valinnoissa pärjäsivät päätoimiset opiskelijat, heikoiten työttömät hakijat. Vaikka miesten hyväksymisprosentit olivat keskimäärin korkeammat kuin naisten, sukupuoli ei osoittautunut itsenäiseksi opiskelemaan pääsyä selittäväksi tekijäksi. Naisten huonompi pärjääminen valinnoissa selittyykin pitkälti sukupuolten eriytyneillä alavalinnoilla. Naisten suosimat alat kun ovat pääsääntöisesti vaikeapääsyisempiä kuin miesten. Tutkimuksessa selvisi myös, että kaupunkilaisuus lisäsi todennäköisyyttä tulla hyväksytyksi. Toisaalta opiskelemaan pääsy erosi myös asuinmaakunnittain, mikä kertoo lähinnä siitä, että eri yliopistojen sisäänpääsyasteissa on varsin suuria eroja. Yliopistojen lohkoutuminen hakijoiden sosiaalisen taustan mukaan oli paljon selvempää kuin alojen. Kaikki pääkaupunkiseudun yliopistot – lukuun ottamatta Teatterikorkeakoulua – luokittuivat isän asemalla mitaten elitistisiksi. Matalimmista taustoista haettiin Lapin, Joensuun ja Vaasan yliopistoihin. Alojen paikka elitistisyyskansanomaisuus -ulottuvuudella vaihteli suuresti yliopistoittain. Teknillistieteellinen, matemaattis-luonnontieteellinen ja kauppatieteellinen ala sijoittuivat kuitenkin keskimääräistä ylemmäs, kun taas kasvatustiede ja farmasia olivat kansanomaisimpia hakukohteita. Opiskelijaksi valikoitumisen peruselementit toistuivat myös tässä tutkimuksessa: koulutetuimpien ja hyvässä asemassa olevien vanhempien jälkeläiset saivat opiskelupaikan useammin kuin muut. Yliopistolaitoksessa vuosikymmenten saatossa toteutetut rakenteelliset muutokset eivät siis ole muuttaneet valikoitumisen peruslinjaa, joskin uutena huomiona nousi maanviljelijöiden jälkeläisten hyvä valinnoissa pärjääminen. Maanviljelijäperheestä tulevien opiskelemaan pääsyn todennäköisyys oli kaikkein suurin.