Stop bugging me! : diversity in appearance of warning coloration

In nature, many animals use body coloration to communicate with each other. For example, colorations can be used as signals between individuals of the same species, but also to recognise individuals of other species, and if they may comprise a threat or not. Many animals use protective coloration to avoid predation. The two most common strategies of protective coloration are camouflage and aposematism. Camouflaged animals have coloration that minimises detection, usually by matching colours or structures in the background. Aposematic animals, on the other hand, signal to predators that they are defended. The defence can be physical structures, such as spikes and hairs, or chemical compounds that make the animal distasteful or even deadly toxic. In order for the warning signal to be effective, the predator has to recognise it as such. Studies have shown that birds for example, that are important visual predators on insects, learn to recognise and avoid unpalatable prey faster if they contrast the background or have large internal contrasts. Typical examples of aposematic species have conspicuous colours like yellow, orange or red, often in combination with black. My thesis focuses on the appearance and function of aposematic colour patterns. Even though researchers have studied aposematism for over a century, there is still a lot we do not know about the phenomenon. For example, as it is crucial that the predators recognise a warning signal, aposematic colorations should assumingly evolve homogeneously and be selected for maximal conspicuousness. Instead, there is an extensive variation of colours and patterns among warning colorations, and it is not uncommon to find typical cryptic colours, such as green and brown in aposematic colour patterns. One hypothesis to this variation is that an aposematic coloration does not have to be maximally signalling in order to be effective, instead it is sufficient to have distinct features that can be easily distinguished from edible prey. To be maximally conspicuous is one way to achieve this, but not the only way. Another hypothesis is that aposematic prey that do not exhibit maximal conspicuousness can exploit both camouflage and aposematism in a distance-dependent fashion, by being signalling when seen close up but camouflaged at a distance. Many prey animals also make use of both strategies by shifting colour at different ecological conditions such as seasonal variations, fluctuations in food resources or between life stages. Yet another explanation for the variation may be that prey animals are usually exposed to several predator species that vary in visual perception and tolerance towards various toxins. The aim with this thesis is, by studying their functions, to understand why aposematic warning signals vary in appearance, specifically in the level of conspicuousness, and if warning coloration can be combined with camouflage. In paper I, I investigated if the colour pattern of the aposematic larva of the Apollo butterfly (Parnassius apollo) can switch function with viewing distance, and be signalling at close range but camouflaged at a distance, by comparing detection time between different colour variants and distances. The results show that the natural coloration has a dual distance-dependent function. Moreover, the study shows that an aposematic coloration does not have to be selected for maximal conspicuousness. A prey animal can optimise its coloration primarily by avoiding detection, but also by investing in a secondary defence, which presence can be signalled if detected. In paper II, I studied how easily detected the coloration of the firebug (Pyrrhocoris apterus), a typical aposematic species, is at different distances against different natural backgrounds, by comparing detection time between different colour variants. Here, I found no distance-dependent switch in function. Instead, the results show that the coloration of the firebug is selected for maximal conspicuousness. One explanation for this is that the firebug is more mobile than the butterfly larva in study I, and movement is often incompatible with efficient camouflage. In paper III, I investigated if a seasonal related colour change in the chemically defended striated shieldbug (Graphosoma lineatum) is an adaptation to optimise a protective coloration by shifting from camouflage to aposematism between two seasons. The results confirm the hypothesis that the coloration expressed in the late summer has a camouflage function, blending in with the background. Further, I investigated if the internal pattern as such increased the effectiveness of the camouflage. Again, the results are in accordance with the hypothesis, as the patterned coloration was more difficult to detect than colorations lacking an internal pattern. This study shows how an aposematic species can optimise its defence by shifting from camouflage to aposematism, but in a different fashion than studied in paper I. The aim with study IV was to study the selection on aposematic signals by identifying characteristics that are common for colorations of aposematic species, and that distinguish them from colorations of other species. I compared contrast, pattern element size and colour proportion between a group of defended species and a group of undefended species. In contrast to my prediction, the results show no significant differences between the two groups in any of the analyses. One explanation for the non-significant results could be that there are no universal characteristics common for aposematic species. Instead, the selection pressures acting on defended species vary, and therefore affect their appearance differently. Another explanation is that all defended species may not have been selected for a conspicuous aposematic warning coloration. Taken together, my thesis shows that having a conspicuous warning coloration is not the only way to be aposematic. Also, aposematism and camouflage is not two mutually exclusive opposites, as there are prey species that exploit both strategies. It is also important to understand that prey animals are exposed to various selection pressures and trade-offs that affect their appearance, and determines what an optimal coloration is for each species or environment. In conclusion, I hold that the variation among warning colorations is larger and coloration properties that have been considered as archetypically aposematic may not be as widespread and representative as previously assumed.

Laivan voimalaitoksen ja jännitevälipiirillisen ruoripotkurikäytön vuorovaikutusten mallintaminen

Diplomityössä on tutkittu sähköisellä potkurijärjestelmällä varustetun laivan voimalaitoksen ja jännitevälipiirillisen propulsiokäytön vuorovaikutusta laivan hätäpysäytyksen aikana. Työssä on kehitetty simulointimalleja jännitevälipiirillisten sähkökäyttöjen simuloimiseksi Saber -simulontiohjelmistolla.Työn alkuosassa esitetään lyhyt yhteenveto laivan sähköisestä potkurijärjestelmästä komponentteineen, käsitellään laivan hätäpysäytyksen teoriaa sekä simuloinneissa huomioonotettavia laivan ja potkurin hydrodynaamisia ominaisuuksia. Työssä käytettävän simulointiohjelmiston toimintaa selvitetään lyhyesti. Jännitevälipiirillisellä propulsiokäytöllä varustetun laivan hätäpysäytyksen simulointimalli esitellään kokonaisuudessaan ja käsitellään simulointimallin sisältämien osakokonaisuuksien teoriaa ja toimintaa. Kehitetyn simulointimallin toimintaa on tarkasteltu vertaamalla tuloksia vastaavansyklokonvertterikäytöllä varustetun laivan simulointituloksiin sekä vertaamallasimulointituloksia laivan merikoeajon yhteydessä tehtyihin mittauksiin. Simulointitulokset vastasivat teoriaa sekä mittaustuloksia varsin hyvin. Voimalaitoksenosalta ei mittaustuloksia ollut käytettävissä, mutta simulointitulokset ovat teorian mukaisia.

Wet Oxidation of Concentrated Wastewaters: Process Combination and Reaction Kinetic Modeling

The accumulation of aqueous pollutants is becoming a global problem. The search for suitable methods and/or combinations of water treatment processes is a task that can slow down and stop the process of water pollution. In this work, the method of wet oxidation was considered as an appropriate technique for the elimination of the impurities present in paper mill process waters. It has been shown that, when combined with traditional wastewater treatment processes, wet oxidation offers many advantages. The combination of coagulation and wet oxidation offers a new opportunity for the improvement of the quality of wastewater designated for discharge or recycling. First of all, the utilization of coagulated sludge via wet oxidation provides a conditioning process for the sludge, i.e. dewatering, which is rather difficult to carry out with untreated waste. Secondly, Fe2(SO4)3, which is employed earlier as a coagulant, transforms the conventional wet oxidation process into a catalytic one. The use of coagulation as the post-treatment for wet oxidation can offer the possibility of the brown hue that usually accompanies the partial oxidation to be reduced. As a result, the supernatant is less colored and also contains a rather low amount of Fe ions to beconsidered for recycling inside mills. The thickened part that consists of metal ions is then recycled back to the wet oxidation system. It was also observed that wet oxidation is favorable for the degradation of pitch substances (LWEs) and lignin that are present in the process waters of paper mills. Rather low operating temperatures are needed for wet oxidation in order to destruct LWEs. The oxidation in the alkaline media provides not only the faster elimination of pitch and lignin but also significantly improves the biodegradable characteristics of wastewater that contains lignin and pitch substances. During the course of the kinetic studies, a model, which can predict the enhancements of the biodegradability of wastewater, was elaborated. The model includes lumped concentrations suchas the chemical oxygen demand and biochemical oxygen demand and reflects a generalized reaction network of oxidative transformations. Later developments incorporated a new lump, the immediately available biochemical oxygen demand, which increased the fidelity of the predictions made by the model. Since changes in biodegradability occur simultaneously with the destruction of LWEs, an attempt was made to combine these two facts for modeling purposes.

Effect of Noncondensable Gases on Circulation of Primary Coolant in Nuclear Power Plants in Abnormal Situations

The present study focuses on two effects of the presence of a noncondensable gas on the thermal-hydraulic behavior of thecoolant of the primary circuit of a nuclear reactor in the VVER-440 geometry inabnormal situations. First, steam condensation with the presence of air was studied in the horizontal tubes of the steam generator (SG) of the PACTEL test facility. The French thermal-hydraulic CATHARE code was used to study the heat transfer between the primary and secondary side in conditions derived from preliminary experiments performed by VTT using PACTEL. In natural circulation and single-phase vapor conditions, the injection of a volume of air, equivalent to the totalvolume of the primary side of the SG at the entrance of the hot collector, did not stop the heat transfer from the primary to the secondary side. The calculated results indicate that air is located in the second half-length (from the mid-length of the tubes to the cold collector) in all the tubes of the steam generator The hot collector remained full of steam during the transient. Secondly, the potential release of the nitrogen gas dissolved in the water of the accumulators of the emergency core coolant system of the Loviisa nuclear power plant (NPP) was investigated. The author implemented a model of the dissolution and release ofnitrogen gas in the CATHARE code; the model created by the CATHARE developers. In collaboration with VTT, an analytical experiment was performed with some components of PACTEL to determine, in particular, the value of the release time constant of the nitrogen gas in the depressurization conditions representative of the small and intermediate break transients postulated for the Loviisa NPP. Such transients, with simplified operating procedures, were calculated using the modified CATHARE code for various values of the release time constant used in the dissolution and release model. For the small breaks, nitrogen gas is trapped in thecollectors of the SGs in rather large proportions. There, the levels oscillate until the actuation of the low-pressure injection pumps (LPIS) that refill the primary circuit. In the case of the intermediate breaks, most of the nitrogen gas is expelled at the break and almost no nitrogen gas is trapped in the SGs. In comparison with the cases calculated without taking into account the release of nitrogen gas, the start of the LPIS is delayed by between 1 and 1.75 h. Applicability of the obtained results to the real safety conditions must take into accountthe real operating procedures used in the nuclear power plant.

Metsäteollisuuden jätevesien häiriöpäästöt ja niihin varautuminen. CASE: Kaakkois-Suomi

Metsäteollisuuden jätevesien normaaleja jatkuvia päästöjä hallitaan yhä paremmin. Tästä syystä niin sanottujen häiriöpäästöjen merkitys vesien kuormittajana kasvaa. Työssä tarkasteltiin 14 Kaakkois-Suomen metsäteollisuuden toiminnanharjoittajan jätevesien häiriöpäästöjä.Työn tavoitteena oli selvittää minkälaisia ja kuinka paljon poikkeuksellisia tilanteita on viime vuosina esiintynyt. Työssä selvitettiin mitkä syyt olivat aiheuttaneet häiriöpäästöjä, mitä vaikutuksia häiriöillä oli jätevesipäästöihin sekä kuinka tilanteissa oli toimittu. Työn teoriaosassa tarkasteltiin metsäteollisuuden tuotantoprosessien ja jätevedenpuhdistuksen mahdollisia häiriöpäästölähteitä sekä niiden ominaispiirteitä. Lisäksi tarkasteltiin häiriöpäästöjen vaikutuksia ja seurauksia toiminnanharjoittajien ja lupaviranomaisten näkökulmasta sekä kuinka häiriöpäästöihin tulee lainsäädännön ja ympäristöjärjestelmien mukaan varautua. Tutkimusosio koostui toiminnanharjoittajille lähetetystä häiriöpäästökyselystä, viranomaisille lähetetyistä häiriöpäästöilmoituksista sekä VAHTI –tietokannan vesipäästötiedoista. Kaikilla toiminnanharjoittajilla esiintyi häiriöpäästöjä. Häiriöpäästöt aiheuttivat lupaehtojen ylityksiä vuosina 1998-2003 yhteensä 66 kappaletta. Suurimpana syynä häiriöpäästöihin olivat prosessihäiriöt. Useimmiten häiriöpäästöt olivat usean eri syyn summa. Häiriöpäästöjen ilmoittamiskäytäntö viranomaisille vaihtelee, vaikka lupaehdoissa häiriö- ja poikkeustilanteet on määritelty kaikille lähes samalla tavalla. Jotkut ilmoittavat kaikista päästölisäyksistä, kun taas toiset ainoastaan merkittävistä. Osa ilmoittaa häiriöpäästöistä puhelimitse, jolloin ilmoituksesta ei jää kirjallista dokumenttia. Kaikista lupaehtojen ylityksistä ei ole tehty kirjallista ilmoitusta. Lupaehdoissa on häiriö- ja poikkeustilanteet määritelty sen verran suppeasti, että toiminnanharjoittajat soveltavat niitä haluamallaan tavalla. Valvontaviranomaiset puuttuvat häiriötilanteisiin lähinnä kehottamalla toiminnanharjoittajia poistamaan häiriötilanteet. Viranomaiset eivät ole määränneet toiminnan keskeyttämistä häiriöpäästöjen poistamiseksi. Yhdestä häiriöpäästöstä on tehty rikosilmoitus.

Lahti–Kerava -Oikoradan ensivaikutukset linja-autoliikenteeseen

Työn tavoitteena on tutkia syyskuussa 2006 auenneen Lahti-Kerava Oikoradan ensivaikutuksia linja-autoliikenteeseen. Vaikutuksia tutkitaan kolmelta eri kannalta, joita ovat linja-autoyritykset, matkustajat ja kunnat. Työstä on rajattu pois Helsingin sopimusliikenne eli YTV-alue. Tutkimus on kvalitatiivinen, ymmärtämään pyrkivä ja hyvin empiriapainotteinen. Tutkimus toteutetaan pääsääntöisesti analysoimalla tilastollista tietoa ja tekemällä teemahaastatteluja. Lisäksi vaikutuksia matkustajille tutkitaan matkustajatutkimuksen avulla. Tutkimustulokset osoittavat, että matkustajamäärät ovat linja-autoliikenteessä vähentyneet huomattavasti Lahti-Helsinki-Lahti sekä Mäntsälä-Helsinki-Mäntsälä - väleillä oikoradan henkilöjunaliikenteen alkamisen jälkeen. Matkustajatutkimus osoittaa, että matkustaja valitsee linja-auton tälle välille sopivan matkareitin, pysäkille pääsemisen helppouden ja luotettavuuden vuoksi. Juna puolestaan valitaan sen nopeuden ja hinnan vuoksi tutkitulla välillä.

Time-lapse -intervallikuvaaminen

Miltä sinusta tuntuisi nähdä vanhenevasi viisikymmentä vuotta minuutissa? Time-lapse -kuvaus on nykytekniikalla ainoa keino ihmisille matkustaa ajassa. Tällä kuvaustavalla on mahdollista hidastaa elämää tai vastaavasti nopeuttaa sitä. Tämän opinnäytetyön tarkoituksena on käydä läpi ne keinot ja tekniikat kuinka time-lapse -kuvia voidaan tehdä. Työn tavoitteena on ollut ymmärtää time-lapse -kuvaamista ja tutustua eri efekteihin, joita voi tehdä intervallikuvauksen avulla. Työhön on tehty kuvamateriaalia kirjallisen osan tueksi, jotta lukijan olisi mahdollisimman helppo ymmärtää kuvaustapaa. Työhön on tehty kaavoja ja kuvia, jotka antavat lukijalle mahdollisuuden myös kokeilla kuvien ottamista. Työssä on kerrottu kuvien ottamisesta ja siinä helposti tehtävistä virheistä, jotta lukijan ei tarvitsisi omissa kokeiluissaan ajaa samoihin ansoihin, kuin opinnäytetyötä tehdessä on ajettu. Time-lapse -kuvaaminen on kiehtova tapa tuoda kaikki valokuvauksen keinot elokuvaan. Tämä työ on tehty sitä varten, että tekijä itse on syventänyt ymmärrystään kuvaustapaan ja siksi, että lukija voisi suunnitella kuvauksiaan monipuolisemmin. Tämä työ käy time-lapse -kuvaamisen pinnalla. Syvemmällä kuvaustavan sisällä on miljoonia keinoja, joita on mahdollista löytää, kokeilla ja käyttää. Tämän työn tarkoituksena on olla alku matkalle, joka vie mukanaan kokeilemaan uusia keinoja, joita ei ehkä kuvien digitaalisuuden tuomien mahdollisuuksien myötä ole vielä edes löydetty.

Computing the persistent homology of range images with alpha shapes

Laser scanning is becoming an increasingly popular method for measuring 3D objects in industrial design. Laser scanners produce a cloud of 3D points. For CAD software to be able to use such data, however, this point cloud needs to be turned into a vector format. A popular way to do this is to triangulate the assumed surface of the point cloud using alpha shapes. Alpha shapes start from the convex hull of the point cloud and gradually refine it towards the true surface of the object. Often it is nontrivial to decide when to stop this refinement. One criterion for this is to do so when the homology of the object stops changing. This is known as the persistent homology of the object. The goal of this thesis is to develop a way to compute the homology of a given point cloud when processed with alpha shapes, and to infer from it when the persistent homology has been achieved. Practically, the computation of such a characteristic of the target might be applied to power line tower span analysis.

Pienitaajuinen radiosekoitin

Normaalisti radiovastaanottimet on luokiteltavissa suoriin vastaanottimiin ja superheterodynevastaanottimiin. Jälkimmäistä nimitetään tavallisesti supervastaanottimeksi. Molemman vastaanottimen oleellisiin osiin kuuluu antennin virityspiiri, supervastaanottimelle lisäksi paikallisoskillaattorin virityspiiri, mikä pitää virittää antennipiirin kanssa samanaikaisesti. Pienillä taajuuksilla, taajuudet luokassa kilo-Hertzejä tai pienemmillä, on antennipiirin viritys resonanssipiirin ominaisuuksista johtuen sitä kapeammalla kaistalla ja sitä hitaampaa mitä pienemmällä taajuudella vastaanotto tapahtuu. Lisäksi virityspiiri hyvyysluku Q on vaikea saada sopivaksi, mikäli viritys on muuten käytännöllinen, säädettävä resonanssipiiri. Vaadittaessa kiinteätaajuista viritystä on käytännöllistä hyödyntää sähkömekaanisia osia, siis keraamisia tai kvartsikiteitä. Koska kiteitten ja korkean hyvyysluvun piirin värähtely jatkuu useita värähtelyjaksoja ennen saapuneitten värähtelyjen sammumista, kestää myös kauan aikaa, ennen kuin värähtely piirissä on loppu. Pienitaajuinen resonanssipiiri saavuttaa maksimivirtansa hitaasti, jos hyvyysluku on iso, kun piiri alkaa johtaa resonanssitaajuista virtaa. Tässä työssä pyritään vastaanotinjärjestelyyn ongelmallisen, pientaajuisen virityspiirin käytön välttämiseksi. Toisena tavoitteena on saada aikaan vastaanotto siten, että tietty pienitaajuinen radiotaajuusalue voidaan kokonaisuudessaan vastaanottaa jatkuva-aikaisesti, ilman antennipiirin jatkuvaa virittämistä erillisille taajuuksille. Laaditaan kytkentä, joka mitoitetaan, simuloidaan ja mitataan.

Thylakoid Protein Phosphorylation in Regulation of Photosynthesis

Once the seed has germinated, the plant is forced to face all the environmental changes in its habitat. In order to survive, plants have evolved a number of different acclimation systems. The primary reaction behind plant growth and development is photosynthesis. Photosynthesis captures solar energy and converts it into chemical form. Photosynthesis in turn functions under the control of environmental cues, but is also affected by the growth, development, and metabolic state of a plant. The availability of solar energy fluctuates continuously, requiring non-stop adjustment of photosynthetic efficiency in order to maintain the balance between photosynthesis and the requirements and restrictions of plant metabolism. Tight regulation is required, not only to provide sufficient energy supply but also to prevent the damage caused by excess energy. The very first reaction of photosynthesis is splitting of water into the form of oxygen, hydrogen, and electrons. This most fundamental reaction of life is run by photosystem II (PSII), and the energy required for the reaction is collected by the light harvesting complex II (LHCII). Several proteins of the PSII-LHCII complex are reversibly phosphorylated according to the energy balance between photosynthesis and metabolism. Thylakoid protein phosphorylation has been under extensive investigation for over 30 years, yet the physiological role of phosphorylation remains elusive. Recently, the kinases behind the phosphorylation of PSII-LHCII proteins (STN7 and STN8) were identified and the knockout mutants of these kinases became available, providing powerful tools to elucidate the physiological role of PSII-LHCII phosphorylation. In my work I have used the stn7 and stn8 mutants in order to clarify the role of PSII-LHCII phosphorylation in regulation and protection of the photosynthetic machinery according to environmental cues. I show that STN7- dependent PSII-LHCII protein phosphorylation is required to balance the excitation energy distribution between PSII and PSI especially under low light intensities when the excitation energy transfer from LHC to PSII and PSI is efficient. This mechanism differs from traditional light quality-induced “state 1” – “state 2” transition and ensures fluent electron transfer from PSII to PSI under low light, yet having highest physiological relevance under fluctuating light intensity. STN8-dependent phosphorylation of PSII proteins, in turn, is required for fluent turn-over of photodamaged PSII complexes and has the highest importance upon prolonged exposure of the photosynthetic apparatus to excess light.

Julkishallinnon sähköisten palveluiden arkkitehtuurit

Sähköinen asiointi on yleistynyt viime vuosien aikana nopeasti. Toimivia julkishallinnon sähköisiä palveluita kehitetään jatkuvasti yhä uusiin tarkoituksiin. Tällä hetkellä sähköisten palveluiden tarjontaa leimaa hajanaisuus. Jokainen palveluita tarjoava organisaatio kehittää palveluita itsenäisesti, omalla tavallaan. Palveluiden kehittäminen asiakaslähtöisesti edellyttää palvelukokonaisuuksien suunnittelua arkkitehtuuritasolla. Yksittäisten sovellusten kehittämisen lisäksi on huomioitava näiden sovellusten toimivuus yhteen, osana suurempaa kokonaisuutta. Palvelukeskeisessä arkkitehtuurisuunnittelussa lähtökohta on se, että jokainen yksittäinen sovellus on itsessään palvelu, joka tuottaa määritelmänsä mukaisen tulosteen sellaisessa muodossa, jota muut sovellukset kykenevät ymmärtämään. Työn tuloksena havaittiin, että vaikka sähköiselle hallinnolle on kehitetty useita viitearkkitehtuureja, on käytännön työ palveluiden integroimiseksi vielä kesken. Yksittäisten palveluiden liittäminen suuremmiksi kokonaisuuksiksi vaatii määrätietoista arkkitehtuurisuunnittelua sekä kansallista suunnittelun koordinointia. Tiedon jakaminen organisaatiorajojen yli muodostaa joukon kysymyksiä, joihin ei ole vielä vastausta. Tietosuojaa ja yksityisyyttä ei voida uhrata sähköistä hallintoa suunniteltaessa.

SMB-laitteiston suunnittelu hydrometallurgisiin sovelluksiin

Työn tarkoituksena oli suunnitella, ohjelmoida ja koekäyttää SMB-laitteisto (Simulated Moving Bed) hydrometallurgisiin erotuksiin. Simuloitu liikkuvapeti saadaan aikaan vaihtamalla sisään- ja ulostuloporttien paikkaa nestevirran suuntaan. Tällöin aikaansaadaan kiintoaineen vastavirtaus minkä johdosta erotustehokkuus kasvaa. Komponenttien retentiotaipumuseroista johtuen komponentit liikkuvat eri nopeuksilla kolonnijärjestelmässä. Enemmän pidättäytyvät komponentit liikkuvat nestevirtaa vastaan ja vähemmän pidättäytyvät komponentit nestevirran mukana. Hydrometallurgiassa vastavirtauksen käyttöä ei ole tieteellisissä julkaisuissa käsitelty laajalti ja saatavilla oleva informaatio onkin kaupallisten yritysten tuottamaa. Hydrometallurgiassa vastavirtausta käyttävissä ioninvaihtolaitteistoissa hyödynnetään irrallisia regenerointivyöhykkeitä. Venttiilijärjestelmän osalta päädyttiin ratkaisuun jossa käytetään yhtä kiertoventtiiliä kullekin virralle, minkä lisäksi kolonnien väleillä käytetään solenoidiventtiiliä. Tämä järjestelmä mahdollistaa yleisimpien SMB-menetelmien käytön mukaan lukien irralliset vyöhykkeet. Laitteiston ohjauksesta vastaa LabVIEW 2010:llä ohjelmoitu ohjelmisto, joka sisältää kaikkien tarvittavien laitteiden ohjausrutiinit. Se mahdollistaa venttiilien synkroniset ja epäsynkroniset vaihdot. Laitteiston puhdistusta varten on ohjelmistoon rakennettu oma rutiini venttiilejä varten. Pumppujen osalta ohjelmisto mahdollistaa vakiovirtauksen sekä lineaaristen ja porrasmuotoisten gradienttien käytön. Ongelmatilanteita varten ohjelmisto valvoo pumppujen ja venttiilien toimintaa ja pysäyttää laitteiston tarvittaessa. Koekäytön avulla pystyttiin todentamaan laitteiston toimivuus.

Understanding the Racial Nature of Police and Immigrant Relations In Finland. The Case of Africans in Turku

The focus of this study is to examine the role of police and immigrants’ relations, as less is known about this process in the country. The studies were approached in two different ways. Firstly, an attempt was made to examine how immigrants view their encounters with the police. Secondly, the studies explored how aware the police are of immigrants’ experiences in their various encounters and interactions on the street level. An ancillary aim of the studies is to clarify, analyse and discuss how prejudice and stereotypes can be tackled, thereby contributing to the general debate about racism and discrimination for better ethnic relations in the country. The data in which this analysis was based is on a group of adults (n=88) from the total of 120 Africans questioned for the entire study (n=45) police cadets and (n=6) serving police officers from Turku. The present thesis is a compilation of five articles. A summary of each article findings follows, as the same data was used in all five studies. In the first study, a theoretical model was developed to examine the perceived knowledge of bias by immigrants resulting from race, culture and belief. This was also an attempt to explore whether this knowledge was predetermined in my attempt to classify and discuss as well as analyse the factors that may be influencing immigrants’ allegations of unfair treatment by the police in Turku. The main finding shows that in the first paper there was ignorance and naivety on the part of the police in their attitudes towards the African immigrant’s prior experiences with the police, and this may probably have resulted from stereotypes or their lack of experience as well as prior training with immigrants where these kinds of experience are rampant in the country (Egharevba, 2003 and 2004a). In exploring what leads to stereotypes, a working definition is the assumption that is prevalent among some segments of the population, including the police, that Finland is a homogenous country by employing certain conducts and behaviour towards ethnic and immigrant groups in the country. This to my understanding is stereotype. Historically this was true, but today the social topography of the country is changing and becoming even more complex. It is true that, on linguistic grounds, the country is multilingual, as there are a few recognised national minority languages (Swedish, Sami and Russian) as well as a number of immigrant languages including English. Apparently it is vital for the police to have a line of communication open when addressing the problem associated with immigrants in the country. The second paper moved a step further by examining African immigrants’ understanding of human rights as well as what human rights violation means or entails in their views as a result of their experiences with the police, both in Finland and in their country of origin. This approach became essential during the course of the study, especially when the participants were completing the questionnaire (N=88), where volunteers were solicited for a later date for an in-depth interview with the author. Many of the respondents came from countries where human rights are not well protected and seldom discussed publicly, therefore understanding their views on the subject can help to explain why some of the immigrants are sceptical about coming forward to report cases of batteries and assaults to the police, or even their experiences of being monitored in shopping malls in their new home and the reason behind their low level of trust in public authorities in Finland. The study showed that knowledge of human rights is notably low among some of the participants. The study also found that female respondents were less aware of human rights when compared with their male counterparts. This has resulted in some of the male participants focussing more on their traditional ways of thinking by not realising that they are in a new country where there is equality in sexes and lack of respect on gender terms is not condoned. The third paper focussed on the respondents’ experiences with the police in Turku and tried to explore police attitudes towards African immigrant clients, in addition to the role stereotype plays in police views of different cultures and how these views have impacted on immigrants’ views of discriminatory policing in Turku. The data is the same throughout the entire studies (n=88), except that some few participants were interviewed for the third paper thirty-five persons. The results showed that there is some bias in mass-media reports on the immigrants’ issues, due to selective portrayal of biases without much investigation being carried out before jumping to conclusions, especially when the issues at stake involve an immigrant (Egharevba, 2005a; Egharevba, 2004a and 2004b). In this vein, there was an allegation that the police are even biased while investigating cases of theft, especially if the stolen property is owned by an immigrant (Egharevba, 2006a, Egharevba, 2006b). One vital observation from the respondents’ various comments was that race has meaning in their encounters and interaction with the police in the country. This result led the author to conclude that the relation between the police and immigrants is still a challenge, as there is rampant fear and distrust towards the police by some segments of the participating respondents in the study. In the fourth paper the focus was on examining the respondents’ view of the police, with special emphasis on race and culture as well as the respondents’ perspective on police behaviour in Turku. This is because race, as it was relayed to me in the study, is a significant predictor of police perception (Egharevba, 2005a; Egharevba and Hannikianen, 2005). It is a known scientific fact that inter-group racial attitudes are the representation of group competition and perceived threat to power and status (Group-position theory). According to Blumer (1958) a sense of group threat is an essential element for the emergence of racial prejudice. Consequently, it was essential that we explored the existing relationship between the respondents and the police in order to have an understanding of this concept. The result indicates some local and international contextual issues and assumptions that were of importance tackling prejudice and discrimination as it exists within the police in the country. Moreover, we have to also remember that, for years, many of these African immigrants have been on the receiving end of unjust law enforcement in their various countries of origin, which has resulted in many of them feeling inferior and distrustful of the police even in their own country of origin. While discussing the issues of cultural difference and how it affects policing, we must also keep in mind the socio-cultural background of the participants, their level of language proficiency and educational background. The research data analysed in this study also confirmed the difficulties associated with cultural misunderstandings in interpreting issues and how these misunderstandings have affected police and immigrant relations in Finland. Finally, the fifth paper focussed on cadets’ attitudes towards African immigrants as well as serving police officers’ interaction with African clients. Secondly, the police level of awareness of African immigrants’ distrustfulness of their profession was unclear. For this reason, my questions in this fifth study examined the experiences and attitudes of police cadets and serving police officers as well as those of African immigrants in understanding how to improve this relationship in the country. The data was based on (n=88) immigrant participants, (n=45) police cadets and 6 serving police officers from the Turku police department. The result suggests that there is distrust of the police in the respondents’ interaction; this tends to have galvanised a heightened tension resulting from the lack of language proficiency (Egharevba and White, 2007; Egharevba and Hannikainen, 2005, and Egharevba, 2006b) The result also shows that the allegation of immigrants as being belittled by the police stems from the misconceptions of both parties as well as the notion of stop and search by the police in Turku. All these factors were observed to have contributed to the alleged police evasiveness and the lack of regular contact between the respondents and the police in their dealings. In other words, the police have only had job-related contact with many of the participants in the present study. The results also demonstrated the complexities caused by the low level of education among some of the African immigrants in their understanding about the Finnish culture, norms and values in the country. Thus, the framework constructed in these studies embodies diversity in national culture as well as the need for a further research study with a greater number of respondents (both from the police and immigrant/majority groups), in order to explore the different role cultures play in immigrant and majority citizens’ understanding of police work.

Improvement of Surface Strength of Paper

Offset printing is a popular printing method that is especially suitable for large and fast print jobs. Newspapers, magazines and books are typical examples of products printed with offset method. In high volume printing production high efficiency is essential. Offset printing uses tacky inks that cause serious stress to the paper surface. Dusting and linting are terms that describe how loose and weakly bonded particles are removed from the paper surface in the printing process. The removed particles accumulate in the process causing deteriorating print quality. This forces the printing operators to stop production for washing and cleaning. Time and money are lost. Dusting and linting tendency of paper can be decreased by improving the surface strength of paper. In the present work a method to increase the surface strength of paper was studied. In the literature part offset printing method and challenges related to offset printing are presented. A review of new methods for surface sizing of paper is also presented. The experimental part presents trials where an apparatus for improving paper surface strength was tested and developed in mill scale. Laboratory work supporting the actual mill scale operations is also presented. The acquired results provide a solid base of information to make decisions on how to proceed with research in the present field of study.

Characterisation of Laser Beam and Paper Material Interaction

It is known already from 1970´s that laser beam is suitable for processing paper materials. In this thesis, term paper materials mean all wood-fibre based materials, like dried pulp, copy paper, newspaper, cardboard, corrugated board, tissue paper etc. Accordingly, laser processing in this thesis means all laser treatments resulting material removal, like cutting, partial cutting, marking, creasing, perforation etc. that can be used to process paper materials. Laser technology provides many advantages for processing of paper materials: non-contact method, freedom of processing geometry, reliable technology for non-stop production etc. Especially packaging industry is very promising area for laser processing applications. However, there are only few industrial laser processing applications worldwide even in beginning of 2010´s. One reason for small-scale use of lasers in paper material manufacturing is that there is a shortage of published research and scientific articles. Another problem, restraining the use of laser for processing of paper materials, is colouration of paper material i.e. the yellowish and/or greyish colour of cut edge appearing during cutting or after cutting. These are the main reasons for selecting the topic of this thesis to concern characterization of interaction of laser beam and paper materials. This study was carried out in Laboratory of Laser Processing at Lappeenranta University of Technology (Finland). Laser equipment used in this study was TRUMPF TLF 2700 carbon dioxide laser that produces a beam with wavelength of 10.6 μm with power range of 190-2500 W (laser power on work piece). Study of laser beam and paper material interaction was carried out by treating dried kraft pulp (grammage of 67 g m-2) with different laser power levels, focal plane postion settings and interaction times. Interaction between laser beam and dried kraft pulp was detected with different monitoring devices, i.e. spectrometer, pyrometer and active illumination imaging system. This way it was possible to create an input and output parameter diagram and to study the effects of input and output parameters in this thesis. When interaction phenomena are understood also process development can be carried out and even new innovations developed. Fulfilling the lack of information on interaction phenomena can assist in the way of lasers for wider use of technology in paper making and converting industry. It was concluded in this thesis that interaction of laser beam and paper material has two mechanisms that are dependent on focal plane position range. Assumed interaction mechanism B appears in range of average focal plane position of 3.4 mm and 2.4 mm and assumed interaction mechanism A in range of average focal plane position of 0.4 mm and -0.6 mm both in used experimental set up. Focal plane position 1.4 mm represents midzone of these two mechanisms. Holes during laser beam and paper material interaction are formed gradually: first small hole is formed to interaction area in the centre of laser beam cross-section and after that, as function of interaction time, hole expands, until interaction between laser beam and dried kraft pulp is ended. By the image analysis it can be seen that in beginning of laser beam and dried kraft pulp material interaction small holes off very good quality are formed. It is obvious that black colour and heat affected zone appear as function of interaction time. This reveals that there still are different interaction phases within interaction mechanisms A and B. These interaction phases appear as function of time and also as function of peak intensity of laser beam. Limit peak intensity is the value that divides interaction mechanism A and B from one-phase interaction into dual-phase interaction. So all peak intensity values under limit peak intensity belong to MAOM (interaction mechanism A one-phase mode) or to MBOM (interaction mechanism B onephase mode) and values over that belong to MADM (interaction mechanism A dual-phase mode) or to MBDM (interaction mechanism B dual-phase mode). Decomposition process of cellulose is evolution of hydrocarbons when temperature is between 380- 500°C. This means that long cellulose molecule is split into smaller volatile hydrocarbons in this temperature range. As temperature increases, decomposition process of cellulose molecule changes. In range of 700-900°C, cellulose molecule is mainly decomposed into H2 gas; this is why this range is called evolution of hydrogen. Interaction in this range starts (as in range of MAOM and MBOM), when a small good quality hole is formed. This is due to “direct evaporation” of pulp via decomposition process of evolution of hydrogen. And this can be seen can be seen in spectrometer as high intensity peak of yellow light (in range of 588-589 nm) which refers to temperature of ~1750ºC. Pyrometer does not detect this high intensity peak since it is not able to detect physical phase change from solid kraft pulp to gaseous compounds. As interaction time between laser beam and dried kraft pulp continues, hypothesis is that three auto ignition processes occurs. Auto ignition of substance is the lowest temperature in which it will spontaneously ignite in a normal atmosphere without an external source of ignition, such as a flame or spark. Three auto ignition processes appears in range of MADM and MBDM, namely: 1. temperature of auto ignition of hydrogen atom (H2) is 500ºC, 2. temperature of auto ignition of carbon monoxide molecule (CO) is 609ºC and 3. temperature of auto ignition of carbon atom (C) is 700ºC. These three auto ignition processes leads to formation of plasma plume which has strong emission of radiation in range of visible light. Formation of this plasma plume can be seen as increase of intensity in wavelength range of ~475-652 nm. Pyrometer shows maximum temperature just after this ignition. This plasma plume is assumed to scatter laser beam so that it interacts with larger area of dried kraft pulp than what is actual area of beam cross-section. This assumed scattering reduces also peak intensity. So result shows that assumably scattered light with low peak intensity is interacting with large area of hole edges and due to low peak intensity this interaction happens in low temperature. So interaction between laser beam and dried kraft pulp turns from evolution of hydrogen to evolution of hydrocarbons. This leads to black colour of hole edges.