Investigating the Existence of Business-IT Alignment Trap in Finnish IT Organizations

The overall purpose of this master's thesis is to investigate the existence of business-IT alignment trap in Finnish IT organizations. The alignment trap refers to the inability of IT investments to deliver the expected business benefits. The basis for this investigation is due to the previous knowledge that high level of IT alignment practice with very low efficacy in an organization can lead to alignment trap. The theory which was established on the dimensions of IT-alignment and efficacy of IT as a whole with considerations for cost reduction and revenue growth benefits. This study explored the same dimensions with the previous study but identified additional benefit (profitability). The study was conducted using the Finnish IT barometer data from different IT organizations. A quantitative research method was used in conducting this study which was built on positivist philosophical stance. The empirical data is based on survey data, an excerpt from the Finnish IT barometer data that captured the annual survey results of IT significance to Finnish organizations as evaluated by business and IT professionals. The survey data comprised of 249 respondents and their responses were categorized into high and low IT intensive which form the basis of the statistical analysis conducted. Overall, five analyses were conducted using the variables of cost reductions, revenue growth and profitability in the 2x2 matrix dimensions of IT alignment and efficacy of IT, grouped into alignment trap, maintenance zone, well-oiled IT and IT-enabled growth. The empirical results, revealed a partial existence of alignment trap in Finnish IT organizations. This is due to a very minute number of organizations that were ensnared in the alignment trap zone on the analyses conducted. Although they recorded considerable high performances in terms of revenue growth rate with IT spending below the average companies, their profitability was considered very low. Generally it was observed that Finnish IT organizations with high efficacy of IT practices had good performances, while those with low efficacy of IT experienced low performances, especially in the aspect of profitability, regardless of the degree of IT alignment. The study proposes that organizations should improve on practices that enhance effectiveness of IT more in order for them to realize the full benefits of IT and to avoid alignment trap.

Statistical variation of weld profiles and their expected influence on fatigue strength

The general objective of this study was to conduct astatistical analysis on the variation of the weld profiles and their influence on the fatigue strength of the joint. Weld quality with respect to its fatigue strength is of importance which is the main concept behind this thesis. The intention of this study was to establish the influence of weld geometric parameters on the weld quality and fatigue strength. The effect of local geometrical variations of non-load carrying cruciform fillet welded joint under tensile loading wasstudied in this thesis work. Linear Elastic Fracture Mechanics was used to calculate fatigue strength of the cruciform fillet welded joints in as-welded condition and under cyclic tensile loading, for a range of weld geometries. With extreme value statistical analysis and LEFM, an attempt was made to relate the variation of the cruciform weld profiles such as weld angle and weld toe radius to respective FAT classes.

Development of data sheets for statistical evaluation of fatigue data

To enable a mathematically and physically sound execution of the fatigue test and a correct interpretation of its results, statistical evaluation methods are used to assist in the analysis of fatigue testing data. The main objective of this work is to develop step-by-stepinstructions for statistical analysis of the laboratory fatigue data. The scopeof this project is to provide practical cases about answering the several questions raised in the treatment of test data with application of the methods and formulae in the document IIW-XIII-2138-06 (Best Practice Guide on the Statistical Analysis of Fatigue Data). Generally, the questions in the data sheets involve some aspects: estimation of necessary sample size, verification of the statistical equivalence of the collated sets of data, and determination of characteristic curves in different cases. The series of comprehensive examples which are given in this thesis serve as a demonstration of the various statistical methods to develop a sound procedure to create reliable calculation rules for the fatigue analysis.

Introducing Basic Systematic Requirements Engineering Practices in Small Organizations with an Easy to Adopt Method

Requirements-relatedissues have been found the third most important risk factor in software projects and as the biggest reason for software project failures. This is not a surprise since; requirements engineering (RE) practices have been reported deficient inmore than 75% of all; enterprises. A problem analysis on small and low maturitysoftware organizations revealed two; central reasons for not starting process improvement efforts: lack of resources and uncertainty; about process improvementeffort paybacks.; In the constructive part of the study a basic RE method, BaRE, was developed to provide an; easy to adopt way to introduce basic systematic RE practices in small and low maturity; organizations. Based on diffusion of innovations literature, thirteen desirable characteristics; were identified for the solution and the method was implemented in five key components:; requirements document template, requirements development practices, requirements; management practices, tool support for requirements management, and training.; The empirical evaluation of the BaRE method was conducted in three industrial case studies. In; this evaluation, two companies established a completely new RE infrastructure following the; suggested practices while the third company conducted continued requirements document; template development based on the provided template and used it extensively in practice. The; real benefits of the adoption of the method were visible in the companies in four to six months; from the start of the evaluation project, and the two small companies in the project completed; their improvement efforts with an input equal to about one person month. The collected dataon; the case studies indicates that the companies implemented new practices with little adaptations; and little effort. Thus it can be concluded that the constructed BaRE method is indeed easy to; adopt and it can help introduce basic systematic RE practices in small organizations.

Laadun kehittäminen suomalaisissa yrityksissä

Laadun ja sen kehittämisen sisältö on ollut jatkuvassa muutostilassa. Laatuajattelu on laajentunut käsittämään yhä suuremman osan organisaatioiden toiminnasta. Laadun kehittämisessä on jatkuvasti otettu käyttöön uusi kehittämiskeinoja. Laaja-alaisesti organisaation toimintaan kytkeytyvistä keinoista tunnetuimpia ovat erilaiset laadunhallintajärjestelmät ja itsearviointi eri kriteeristöjen avulla. Tämän tutkimuksen tavoitteina olivat: a) etsiä motiiveja, minkä vuoksi yritykset ovat alkaneet kehittää laatuaan, b) tutkia total quality management (TQM) -ajattelun soveltamisen syvällisyyden vaikutuksia, c) selvittää laadunkehittämistyön ajallisen keston vaikutuksia, ja d) saada kokonaiskuva keskeisimpien laadun kehittämiskeinojen toteutuksesta ja menestyksellisyydestä. Työn teoriaosassa paneuduttiin laatu-käsitteeseen yritystoiminnassa, laatu- ja TQM-ajattelun sisältöön sekä laadun kehittämisen johtamiseen. Lisäksi tutkittiin keskeisimpiä laadun kehittämisen keinoja, joita olivat mm. ihmisten toiminta, laadunhallintajärjestelmät, itsearvioinnit, toimintaprosessien kehittäminen, asiakas- ja toimittajayhteistyö. Tutkimuksen empiirisessä osassa tutkittiinem. laadun kehittämiseen liittyviä asioita suomalaisissa yrityksissä. Aineisto kerättiin haastattelemalla yritysten laadun kehittämisestä vastaavia henkilöitä 24 yrityksessä. Tulosten esittämisessä hyödynnettiin tilastollisia tutkimusmenetelmiä kvalitatiivisten menetelmien ohella. Tässä aineistossa asiakasvaatimukset ja oma kehityshalu nousivat yleisimmiksi tärkeimmistä laadun kehittämisen aloitusmotiiveista. Mikään tärkeimmistä aloitusmotiiveista ei ollutkuitenkaan johtanut selkeästi ylivoimaisimpaan menestymiseen myöhemmin. TQM-ajattelun laaja-alainen soveltaminen johti laadun kehittämisen kannalta positiiviseen suuntaan. Pisimpään laatuaan kehittäneet yritykset olivat suuria ja kansainvälisesti suuntautuneita. Pelkkä kehitystyön ajallinen kesto näkyi vain vähän kehittämisen eri osa-alueilla. Laadun kehittämistyön menetyksellisyyden kannalta positiivia asioita olivat: henkilöstön aktiivisuus, itsearviointien hyödyntäminen, toimintaprosessien kuvaaminen ja kehittäminen, sekä asiakas- ja toimittajayhteistyö. Laadun kehittämiseen kannattaa ottaa aktiivisesti mukaankoko organisaation henkilöstö. Itsearviointien käytöllä on mahdollista kehittääorganisaatiota laaja-alaisesti. Niin asiakkaat kuin toimittajat kannattaa ottaaaktiivisesti mukaan kehittämistoimintaan. Se on kaikkien osapuolien yhteinen etu.

Value Processingin Organizations - Individual Perceptions in Three Case Companies

Values and value processes are said to be needed in every organization nowadays, as the world is changing and companies have to have something to "keep it together". Organizational values, which are approvedand used by the personnel, could be the key. Every organization has values. But what is the real value of values? The greatest and most crucial challenge is the feasibility of the value process. The main point in this thesis is tostudy how organizational members at different hierarchical levels perceive values and value processes in their organizations. This includes themes such as how values are disseminated, the targets of value processing, factors that affect the process, problems that occur during the value implementation and improvements that could be made when organizational values are implemented. These subjects are studied from the perspective of organizational members (both managers and employees); individuals in the organizations. The aim is to get the insider-perspective on value processing, from multiple hierarchical levels. In this research I study three different organizations (forest industry, bank and retail cooperative) and their value processes. The data is gathered from companies interviewing personnel in the head office and at the local level. The individuals areseen as members of organizations, and the cultural aspect is topical throughout the whole study. Values and cultures are seen as the 'actuality of reality' of organizations, interpreted by organizational members. The three case companies were chosen because they represented different lines of business and they all implemented value processing differently. Sincethe emphasis in this study is at the local level, the similar size of the local units was also an important factor. Values are in 'fashion' -but what does the fashion tell us about the real corporate practices? In annual reports companies emphasize the importance and power of official values. But what is the real 'point' of values? Values are publicly respected and advertised, but still it seems that the words do not meet the deeds. There is a clear conflict between theoretical, official and substantive organizational values: in the value processing from words to real action. This contradiction in value processing is studied through individual perceptions in this study. I study the kinds of perceptions organizationalmembers have when values are processed from the head office to the local level: the official value process is studied from the individual's perspective. Value management has been studied more during the 1990's. The emphasis has usually been on managers: how they consider the values in organizations and what effects it has on the management. Recent literature has emphasized values as tools for improving company performance. The value implementation as a process has been studied through 'good' and 'bad' examples, as if one successful value process could be copied to all organizations. Each company is different with different cultures and personnel, so no all-powerful way of processing values exists. In this study, the organizational members' perceptions at different hierarchical levels are emphasized. Still, managers are also interviewed; this is done since managerial roles in value dissemination are crucial. Organizational values cannot be well disseminated without management; this has been proved in several earlier studies (e.g. Kunda 1992, Martin 1992, Parker 2000). Recent literature has not sufficiently emphasized the individual's (organizational member's) role in value processing. Organizations consist of differentindividuals with personal values, at all hierarchical levels. The aim in this study is to let the individual take the floor. Very often the value process is described starting from the value definition and ending at dissemination, and the real results are left without attention. I wish to contribute to this area. Values are published officially in annual reports etc. as a 'goal' just like profits. Still, the results/implementationof value processing is rarely followed, at least in official reports. This is a very interesting point: why do companies espouse values, if there is no real control or feedback after the processing? In this study, the personnel in three different companies is asked to give an answer. In the empirical findings, there are several results which bring new aspects to the research area of organizational values. The targets of value processing, factors effecting value processing, the management's roles and the problems in value implementation are presented through the individual's perspective. The individual's perceptions in value processing are a recurring theme throughout the whole study. A comparison between the three companies with diverse value processes makes the research complete

Factors Affecting Innovation Adoption in Organizations: The Case of Corporate Website Adoption

Diplomityössä tutkittiin innovaatioiden omaksumista organisaatioissa, ja tarkoituksena oli selvittää tekijät, jotka vaikuttivat omaksumisajankohtaan sekä luokitella yritykset omaksujaryhmiin. Työn empiirinen osuus tarkasteli yritysten internet-kotisivujen omaksumista. Tutkimuksen empiirinen aineisto kerättiin postikyselyn avulla, ja vastausprosentti kyselyssä oli melko hyvä (60%). Aikaisempien tutkimusten pohjalta muodostettiin eri tekijöille mittarit, jotka analyysien perusteella olivat erittäin luotettavia. Regressioanalyysia sovellettiin, kun pyrittiin selvittämään omaksumisajankohtaan vaikuttavia tekijöitä, ja klusterianalyysiä käytettiin apuna omaksujaluokkien muodostamisessa. Omaksujaluokkien väliset erot selvitettiin varianssianalyyseillä. Tutkimuksessa löydettiin kolme omaksumisajankohtaan vaikuttavaa tekijää: (1) innovaation koettu suhteellinen hyöty, (2) yritysjohdon sitoutuminen omaksumisprosessiin, sekä (3) yrityksen strategisten partnereiden määrä. Yritykset luokiteltiin neljään omaksujaluokkaan (innovaattorit, aikaiset omaksujat, aikainen enemmistö ja myöhäinen enemmistö) innovatiivisuuden perusteella. Innovatiivisuutta mitattiin kolmella indikaattorilla, jotka olivat: (1) ajankohta, jolloin yritys tuli tietoiseksi internet-sivuista, (2) ajankohta, jolloin tehtiin omaksumispäätös sekä (3) aika, joka kului internet-sivujen käyttöönottoon. Omaksujaluokkien välillä tunnistettiin lukuisia eroja eri ominaisuuksien suhteen.

Statistical Analysis of Spectral Images

Tämä diplomityö liittyy Spektrikuvien tutkimiseen tilastollisen kuvamallin näkökulmasta. Diplomityön ensimmäisessä osassa tarkastellaan tilastollisten parametrien jakaumien vaikutusta väreihin ja korostumiin erilaisissa valaistusolosuhteissa. Havaittiin, että tilastollisten parametrien väliset suhteet eivät riipu valaistusolosuhteista, mutta riippuvat kuvan häiriöttömyydestä. Ilmeni myös, että korkea huipukkuus saattaa aiheutua värikylläisyydestä. Lisäksi työssä kehitettiin tilastolliseen spektrimalliin perustuvaa tekstuurinyhdistämisalgoritmia. Sillä saavutettiin hyviä tuloksia, kun tilastollisten parametrien väliset riippuvuussuhteet olivat voimassa. Työn toisessa osassa erilaisia spektrikuvia tutkittiin käyttäen itsenäistä komponenttien analyysia (ICA). Seuraavia itsenäiseen komponenttien analyysiin tarkoitettuja algoritmia tarkasteltiin: JADE, kiinteän pisteen ICA ja momenttikeskeinen ICA. Tutkimuksissa painotettiin erottelun laatua. Paras erottelu saavutettiin JADE- algoritmilla, joskin erot muiden algoritmien välillä eivät olleet merkittäviä. Algoritmi jakoi kuvan kahteen itsenäiseen, joko korostuneeseen ja korostumattomaan tai kromaattiseen ja akromaattiseen, komponenttiin. Lopuksi pohditaan huipukkuuden suhdetta kuvan ominaisuuksiin, kuten korostuneisuuteen ja värikylläisyyteen. Työn viimeisessä osassa ehdotetaan mahdollisia jatkotutkimuskohteita.

Building high technology complete products for the markets of humanitarian organizations and developing countries

Tämä tutkielma käsittelee high-tech kokonaisratkaisun rakentamista kehitysmaiden ja humanitääristen organisaatioiden markkinoille. Tavoitteena on löytää ne komponentit joita case-yritys Mediburner Ltd:n polttouuni tarvitsee rinnalleen. Jotta täydentävien elementtien määritteleminen olisi mahdollista, pitää ensin selvittää keitä ovat asiakkaat, ja mitkä ovat heidän tarpeensa. Tutkimusmetodina käytetään kuvailevaa case-tutkimusta. Empiirinen materiaali kerättiin henkilökohtaisissa- ja puhelinkeskusteluissa. Niihin henkilöihin, joiden tavoittaminen oli aikaeron vuoksi hankalaa, otettiin yhteyttä sähköpostitse. Toinen tietolähde olivat dokumentit. Tutkielmassa käytettiin internetsivuja, sairaalajätehuoltoon liittyvien kansainvälisten konferenssien ja kenttätutkimusten raportteja sekä humanitääristen organisaatioiden suosituksia ja lehdistötiedotteita. Tulokseksi saatiin kymmenen tarvittavaa tukevien elementtien ryhmää: lisälaitteet, astiat jätteen keräilyyn ja tilapäiseen varastointiin, polttoaine, sähkö, logistiset ratkaisut, asennus ja käyttöönotto, huolto- ja korjauspalvelut, koulutus, help-desk –palvelu ja rahoitus. Lisäksi tarvitaan imago, joka konkretisoi tarjotun ratkaisun hyödyt. Yksi toimivan imagotyylin perusta voisi olla vastuullisuus.

Use of Statistical Methods in Demand Planning

In a very volatile industry of high technology it is of utmost importance to accurately forecast customers’ demand. However, statistical forecasting of sales, especially in heavily competitive electronics product business, has always been a challenging task due to very high variation in demand and very short product life cycles of products. The purpose of this thesis is to validate if statistical methods can be applied to forecasting sales of short life cycle electronics products and provide a feasible framework for implementing statistical forecasting in the environment of the case company. Two different approaches have been developed for forecasting on short and medium term and long term horizons. Both models are based on decomposition models, but differ in interpretation of the model residuals. For long term horizons residuals are assumed to represent white noise, whereas for short and medium term forecasting horizon residuals are modeled using statistical forecasting methods. Implementation of both approaches is performed in Matlab. Modeling results have shown that different markets exhibit different demand patterns and therefore different analytical approaches are appropriate for modeling demand in these markets. Moreover, the outcomes of modeling imply that statistical forecasting can not be handled separately from judgmental forecasting, but should be perceived only as a basis for judgmental forecasting activities. Based on modeling results recommendations for further deployment of statistical methods in sales forecasting of the case company are developed.

Statistical Methods for Conservation and Alignment Quality in Proteins

Construction of multiple sequence alignments is a fundamental task in Bioinformatics. Multiple sequence alignments are used as a prerequisite in many Bioinformatics methods, and subsequently the quality of such methods can be critically dependent on the quality of the alignment. However, automatic construction of a multiple sequence alignment for a set of remotely related sequences does not always provide biologically relevant alignments.Therefore, there is a need for an objective approach for evaluating the quality of automatically aligned sequences. The profile hidden Markov model is a powerful approach in comparative genomics. In the profile hidden Markov model, the symbol probabilities are estimated at each conserved alignment position. This can increase the dimension of parameter space and cause an overfitting problem. These two research problems are both related to conservation. We have developed statistical measures for quantifying the conservation of multiple sequence alignments. Two types of methods are considered, those identifying conserved residues in an alignment position, and those calculating positional conservation scores. The positional conservation score was exploited in a statistical prediction model for assessing the quality of multiple sequence alignments. The residue conservation score was used as part of the emission probability estimation method proposed for profile hidden Markov models. The results of the predicted alignment quality score highly correlated with the correct alignment quality scores, indicating that our method is reliable for assessing the quality of any multiple sequence alignment. The comparison of the emission probability estimation method with the maximum likelihood method showed that the number of estimated parameters in the model was dramatically decreased, while the same level of accuracy was maintained. To conclude, we have shown that conservation can be successfully used in the statistical model for alignment quality assessment and in the estimation of emission probabilities in the profile hidden Markov models.