Relay card for capacitance measurements

In this bachelor's thesis a relay card for capacitance measurements was designed, built and tested. The study was made for the research and development laboratory of VTI Technologies, which manufactures capacitive silicon micro electro mechanical accelerometers and pressure sensors. As the size of the sensors is decreasing the capacitance value of the sensors also decreases. The decreased capacitance causes a need for new and more accurate measurement systems. The technology used in the instrument measuring the capacitance dictates a framework how the relay card should be designed, thus the operating principle of the instrument must be known. To achieve accurate results the measurement instrument and its functions needed to be used correctly. The relay card was designed using printed circuit board design methods that minimize interference coupling to the measurement. The relay card that was designed in this study is modular. It consists of a separate CPU card, which was used to control the add-on cards connected to it. The CPU card was controlled from a computer through a serial bus. Two add-on cards for the CPU card were designed in this study. The first one was the measurement card, which could be used to measure 32 capacitive sensors. The second add-on card was the MUX card, which could be used to switch between two measurement cards. The capacitance measurements carried out through the MUX card and the measurement cards were characterized with a series of test measurements. The test measurement data was then analysed. The relay card design was confirmed to work and offer accurate measurement results up to a measurement frequency of 10 MHz. The length of the measurement cables limited the measurement frequency.

The design and implementation of a standards-based mobile messaging platform - case WAP Push Proxy Gateway

Tässä diplomityössä perehdytään WAP:in Push -viitekehykseen. WAP-standardit määrittelevät kuinka Internet-tyyppisiä palveluita, joita voidaan käyttää erilaisia mobiileja päätelaiteitteita käyttäen, toteutetaan tehokkaalla ja verkkoteknologiasta riippumattomalla tavalla. WAP pohjautuu Internet:iin, mutta huomioi pienten päätelaitteiden ja mobiiliverkkojen rajoitukset ja erikoisominaisuudet. WAP Push viitekehys määrittelee verkon aloittaman palvelusisällön toimittamisen. Työn teoriaosassa käydään läpi yleinen WAP-arkkitehtuuri ja WAP-protokollapino käyttäen vertailukohtina lanka-Internetin arkkitehtuuria ja protokollapinoa. Edellistä perustana käyttäen tutustaan WAP Push -viitekehykseen. Käytännönosassa kuvataan WAP Push -välityspalvelimen suunnittelu ja kehitystyö. WAP Push -välityspalvelin on keskeinen verkkoelementti WAP Push -viitekehyksessä. WAP Push -välityspalvelin yhdistää Internetin ja mobiiliverkon tavalla, joka piilottaa teknologiaeroavaisuudet Internetissä olevalta palveluntuottajalta.

The ramp-up of new products in the outbound logistics

Tässä diplomityössä on perehdytty kaaoksen ja oppivan organisaation mekaniikkaan ja olemukseen. Niitä on sovellettu uuden tuotteen saattamiseen logistiikan toimitusketjuun Nokia Oyj:n Networks toimialaryhmässä. Samalla on pyritty löytämään ratkaisuja toiminnan parantamiseksi. Kaaosjohtaminen tarjoaa prosessijohtamista täydentävän tavan mallintaa muutosta ja selittää sen aikaansaamia ilmiöitä. Näiden kahden viitekehyksen avulla on pyritty pureutumaan laajaan ja moniulotteiseen ongelmakenttään. Muotoaan hakevassa organisaatiossa kaaoksen elementit ovat voimakkaasti läsnä. Kaaoksen hallintaan liittyy saumattomasti itseorganisoituminen ja oppiminen. Oppinen ei ole organisaatiolle yhtä luontainen kyky kuin se on yksilölle. Se vaatii organisaation jäseniltä oman roolinsa tiedostamista ja tiedon jakamista. Organisaation tavoitteet saattavat yksilön näkökulmasta tuntua joskus epäkonkreettisilta ja samalla muutokset hallitsemattomilta. Markkinoiden ja teknologian muuttuminen on ollut erityisen nopeaa telekommunikaatioalalla. Näissä olosuhteissa on tärkeää pyrkiä oppivaan organisaatioon, joka tukee organisaation toimintaa läpi muutoksen.

Feasibility study of the available relay protection solutions for microgrids

Thesis talks about relay protection for microgrids. Microgrid operation sets more challenges than traditional utility grid protection because of lower fault current levels. Solutions for these challenges are discussed in this paper. Thesis also studies available relay protection solutions and figures out how they would fit for microgrid protection.

Health-related quality of life in school children: validation of instrument, child self assessment, parent-proxy assessment and school nursing documentation of health check-ups

The aims of this study were to validate an international Health-Related Quality of Life (HRQL) instrument, to describe child self and parent-proxy assessed HRQL at child age 10 to 12 and to compare child self assessments with parent-proxy assessments and school nursing documentation. The study is part of the Schools on the Move –research project. In phase one, a cross-cultural translation and validation process was performed to develop a Finnish version of Pediatric Quality of Life Inventory™ 4.0 (PedsQL™ 4.0). The process included a two-way translation, cognitive interviews (children n=7, parents n=5) and a survey (children n=1097, parents n=999). In phase two, baseline and follow-up surveys (children n=986, parents n=710) were conducted to describe and compare the child self and parent-proxy assessed HRQL in school children between the ages 10 and 12. Phase three included two separate data, school nurse documented patient records (children n=270) and a survey (children n=986). The relation between child self assessed HRQL and school nursing documentation was evaluated. Validity and reliability of the Finnish version of PedsQL™ 4.0 was good (Child Self Report α=0.91, Parent-Proxy Report α=0.88). Children reported lower HRQL scores at the emotional (mean 76/80) than the physical (mean 85/89) health domains and significantly lower scores at the age of 10 than 12 (dMean=4, p=<0.001). Agreement between child self and parent-proxy assessment was fragile (r=0,4, p=<0.001) but increased as the child grew from age 10 to 12 years. At health check-ups, school nurses documented frequently children’s physical health, such as growth (97%) and posture (98/99%) but seldom emotional issues, such as mood (2/7%). The PedsQLTM 4.0 is a valid instrument to assess HRQL in Finnish school children although future research is recommended. Children’s emotional wellbeing needs future attention. HRQL scores increase during ages between childhood and adolescence. Concordance between child self and parent-proxy assessed HRQL is low. School nursing documentation, related to child health check-ups, is not in line with child self assessed HRQL and emotional issues need more attention.

Linking supplier delivery risk to outbound delivery service performance improvement

Customer satisfaction should be the main focus for all of the parts of the business. Usually supply chain behind the business is in a key role when this focus is pursued especially in repair service business. When focusing on the materials that are needed to make repairs to equipment under service contracts, the time aspect of quality is critical. Do late deliveries from supplier have an effect on the service performance of repairs when distribution center of a centralized purchasing unit is acting as a buffer between suppliers and repair service business? And if so, how should the improvement efforts be prioritized? These are the two main questions that this thesis focuses on. Correlation and linear regression was tested between service levels of supplier and distribution center. Percentage of on-time deliveries were compared to outbound delivery service level. It was found that there is statistically significant correlation between inbound and outbound operations success. The other main question of the thesis, improvement prioritization, was answered by creating material availability based supplier classification and additional to that, by developing the decision process for the analysis of most critical suppliers. This was built on a basis of previous supplier and material classification methods.

The influence of high cable penetration in distribution networks on earth fault currents and the operation of relay protection.

Recent Storms in Nordic countries were a reason of long power outages in huge territories. After these disasters distribution networks' operators faced with a problem how to provide adequate quality of supply in such situation. The decision of utilization cable lines rather than overhead lines were made, which brings new features to distribution networks. The main idea of this work is a complex analysis of medium voltage distribution networks with long cable lines. High value of cable’s specific capacitance and length of lines determine such problems as: high values of earth fault currents, excessive amount of reactive power flow from distribution to transmission network, possibility of a high voltage level at the receiving end of cable feeders. However the core tasks was to estimate functional ability of the earth fault protection and the possibility to utilize simplified formulas for operating setting calculations in this network. In order to provide justify solution or evaluation of mentioned above problems corresponding calculations were made and in order to analyze behavior of relay protection principles PSCAD model of the examined network have been created. Evaluation of the voltage rise in the end of a cable line have educed absence of a dangerous increase in a voltage level, while excessive value of reactive power can be a reason of final penalty according to the Finish regulations. It was proved and calculated that for this networks compensation of earth fault currents should be implemented. In PSCAD models of the electrical grid with isolated neutral, central compensation and hybrid compensation were created. For the network with hybrid compensation methodology which allows to select number and rated power of distributed arc suppression coils have been offered. Based on the obtained results from experiments it was determined that in order to guarantee selective and reliable operation of the relay protection should be utilized hybrid compensation with connection of high-ohmic resistor. Directional and admittance based relay protection were tested under these conditions and advantageous of the novel protection were revealed. However, for electrical grids with extensive cabling necessity of a complex approach to the relay protection were explained and illustrated. Thus, in order to organize reliable earth fault protection is recommended to utilize both intermittent and conventional relay protection with operational settings calculated by the use of simplified formulas.

Improving business processes in a globally dispersed make-to-order supply chain. Case study on outbound logistics in a Multinational Corporation

The purpose of this thesis is to find out how outbound logistics process can be improved by reducing unnecessary waste in a globally dispersed make-to-order (MTO) supply chain. The research problem was addressed by a multinational corporation that aims to find a solution for reducing unnecessary waste in their outbound logistics process. The focus is on customized products that are delivered via sea transportation. Theoretical framework for improving outbound logistics processes in globally dispersed MTO supply chain was created based on business process management, Porter’s value chain theory, value stream mapping and current reality tree. The empirical research was conducted by using constructive approach due to its ability to research a practical problem and to improve the existing practices. The data was collected from ten semi-structured interviews and three non-participant observations. By analysing the data and applying the theoretical framework, five types of waste were detected in the process that were seen to derive from six root causes. Practical solution was constructed to reduce the waste in the process by combining the existing literature with the ideas raising from empirical data. The results of this thesis suggest that a MNC with a globally dispersed MTO supply chain can improve its outbound logistics process by applying activities that enhance internal and external integration, collaboration and coordination, and increase predictability of the process. This research has practical relevance both for the case company as well as for other MNCs with globally dispersed MTO supply chains that aim to improve their outbound logistics processes. This research contributes to the BPM and CRA research by providing an evidence for their applicability in the new context.

Relay protection in active distribution networks

Increasingly growing share of distributed generation in the whole electrical power system’s generating system is currently a worldwide tendency, driven by several factors, encircling mainly difficulties in refinement of megalopolises’ distribution networks and its maintenance; widening environmental concerns adding to both energy efficiency approaches and installation of renewable sources based generation, inherently distributed; increased power quality and reliability needs; progress in IT field, making implementable harmonization of needs and interests of different-energy-type generators and consumers. At this stage, the volume, formed by system-interconnected distributed generation facilities, have reached the level of causing broad impact toward system operation under emergency and post-emergency conditions in several EU countries, thus previously implementable approach of their preliminary tripping in case of a fault, preventing generating equipment damage and disoperation of relay protection and automation, is not applicable any more. Adding to the preceding, withstand capability and transient electromechanical stability of generating technologies, interconnecting in proximity of load nodes, enhanced significantly since the moment Low Voltage Ride-Through regulations, followed by techniques, were introduced in Grid Codes. Both aspects leads to relay protection and auto-reclosing operation in presence of distributed generation generally connected after grid planning and construction phases. This paper proposes solutions to the emerging need to ensure correct operation of the equipment in question with least possible grid refinements, distinctively for every type of distributed generation technology achieved its technical maturity to date and network’s protection. New generating technologies are equivalented from the perspective of representation in calculation of initial steady-state short-circuit current used to dimension current-sensing relay protection, and widely adopted short-circuit calculation practices, as IEC 60909 and VDE 0102. The phenomenon of unintentional islanding, influencing auto-reclosing, is addressed, and protection schemes used to eliminate an sustained island are listed and characterized by reliability and implementation related factors, whereas also forming a crucial aspect of realization of the proposed protection operation relieving measures.

Scouring uncharted waters – managing outbound open innovation in maritime industry

This thesis discusses the unexplored opportunities of open innovation, with a special focus on outbound open innovation. The extant literature indicates that the field of outbound open innovation still lacks of research, and especially the managerial issues lack of practicality. Also, the applicability to SME’s and traditional fields has been argued. The purpose of this study is to investigate how the outbound open innovation activities can be managed in maritime industry. By combining existing literature from the field of open innovation and innovation management, this study suggests first a theoretical management model, and contributes how it can be applied to industry- and company specifics; and then develops a practical model by constructing from the case company’s current management processes. As a result, the study synthesises a theoretical model of how the outbound open innovation activities can be managed. This model positions the outbound open innovation activities, the theoretical concepts found from the literature review, R&D processes, and the outbound open innovation implementation stages identified by previous research; and thus responses the need for practical steps for any company planning outbound open innovation activities. Practical tool for managers is also provided by identifying issues that are applied to industry- and company specifics. Then, open-ended case study questions are formulated accordingly and expert interviews selected by chain referral sampling, are conducted. Interviews provide information for the current management processes. By identifying the best practices and main challenges it is possible to outline and evaluate current outbound open innovation management processes and strategic choices in it. The researcher considers also the networks and their spheres of influences for the actors, activities and resources in the processes. Thus, the study provides a novel approach, and practical tools for the researchers and practioners in the field of open innovation. All in all, the study has come up that outbound open innovation is applicable to maritime industry; and the case company indeed has perfected its processes as cost-effective as possible, and so found its balance between the costs and benefits. However, several issues for future development are pointed out, and the study offers proposals for theory building. Findings are piloting in kind, but provide several theoretical and managerial implications, and reveal new research needs for the field.

IFRS and Asymmetrical Information: Empirical Evidence from the Finnish Stock Markets

Tutkimuksen tavoitteena on selvittää kansainvälisiin tilinpäätösstandardeihin siirtymisen vaikutuksia epäsymmetriseen informaatioon Suomen osake-markkinoilla. Suomalaisten tilinpäätöskäytäntöjen ja kansainvälisten standardien eroja on selvitetty ensin laadullisin menetelmin,jonka jälkeen on tehty asymmetrisen informaation markkinapohjaisiin mittareihinperustuva kvantitatiivinen tutkimus. Yleisiin eroavaisuuksiin liittyvän selvityksen lisäksi on tutkittu erikseen erityisesti standardimuutoksen vaikutusta älylliseen pääomaan liittyvään informaation asymmetriaan. Empiirisessä osiossa älyllisen pääoman epäsuoraksi mitaksi on valittu kehitys- ja tutkimusmenojen suhde taseen loppusummaan. Kuten oletus oli, sekä laadullisen että empiirisen osion tulokset viittaavat siihen, että IFRS:n myötä informaatioympäristö on parantunut. Uudet standardit vaativat laajempaa ja tarkempaa informaation julkaisua liittyen älylliseen pääomaan, mikä ei ole kuitenkaan havaittavissa valituissa mittareissa

Langattoman Internet-puhelupalvelun tarjoaminen

Langattomalla Internetpuhelupalvelulla tarkoitetaan Internet-puheluiden (Voice over Internet Protocol, VoIP) siirtoa langattoman tiedonsiirtoverkon ylitse. Tälläisia langattomia verkkoja voivat olla esimerkiksi langattomat lähiverkot, WiMAX-verkot tai 450 megahertsin (MHz) taajuusalueella toimivat tiedonsiirtoverkot. VoIP-yhteyden toiminta voidaan jakaa kolmeen eri toiminta-alueeseen: yhteydenmuodostusprotokollaan, äänen koodaukseen sekä siirtotiehen. Yhteydenmuodostusprotokollia ovat esimerkiksi SIP (Session Initiation Protocol) sekä H.323. Yhteydenmuodostusprotokollantehtävänä on muodostaa yhteys käyttäjien välille sekä sopia yhteydessäkäytettävistä ominaisuuksista. Äänen koodauksessa ääni pakataan paketteihin, joita lähetetään siirtotietä pitkin eri käyttäjien välillä. Normaalissa Internetpuheluyhteydessä siirtotienä käytetään langallisia siirtoteitä. Tässä työssä on keskitytty langattomiin siirtoteihin ja niidentuomiin haasteisiin, kuten yhteyden luotettavuuteen ja laatuun, yhteyskapasiteetin riittävyyteen sekä siirtymiseen saman verkon eri tukiasemien sekä eri verkkojen välillä. Työssä rakennettiin yksinkertainen, mutta toimiva langaton Internetpuhelujärjestelmä sekä verrattiin sen ominaisuuksia normaaliin Internetpuhelujärjestelmään. Järjestelmää koekäytettiin oikeassa toimintatilanteessa varsinaisen puhelinjärjestelmän rinnalla tavallisessa toimistoympäristössä. Testaustulosten ja käyttäjäkokemusten perusteella on periaatteessa mahdollista rakentaa yksinkertainen langaton Internetpuhelujärjestelmä ja käyttää sitä puhelupalveluiden tarjoamiseen. Palvelun tarjoaminen vaatii kuitenkin vielä tiettyjen viestintäviraston määräysten täyttämistä ennen tuotantokäyttöön ottamista.