Kansainvälisten tilinpäätösstandardien mukainen osatuloutus rakennusliiketoiminnassa Venäjällä

Työn tavoitteena on selvittää, miten perustajaurakoitsijan raportointikauden tulos muodostuu yksittäisen rakennusprojektin tasolla ja miten eri tekijät vaikuttavat raportoitavaan tulokseen. Julkisesti noteeratun yhtiön on noudatettava kansainvälisiä tilinpäätösstandardeja. Tällöin perustajaurakointia harjoittavan yrityksen raportointikauden tulokseksi muodostuu tuloutettavan valmistusasteen mukainen osa projektin erilliskatteesta. Tällainen tuloutusmenetelmä perustuu projektin lopputulosennusteisiin kokonaistuotoista ja -kustannuksista. Tutkimuksessa arvioidaan kustannus- ja tuottoennusteiden arviointiepätarkkuuksien vaikutusta raportointikausien tuloksiin rakennusprojektin eri vaiheissa. Analyysityökaluksi kehitetään matemaattinen malli, jolla voidaan erottaa arviointiepätarkkuuksien vaikutus raportointikauden tuloksesta. Mallin avulla epätarkkuuksia arvioidaan herkkyysanalyysillä sekä esimerkeillä. Tutkimus osoittaa tuloutettavan valmistusasteen (IAS%) olevan keskeinen vaikuttaja tuloksen vaihtelulle, kun ennusteita tarkennetaan projektin edetessä. Kustannusennusteen nähdään olevan tuloksen kannalta kriittisempi ennuste, mikä korostaa projektiseurannan merkitystä. Lisäksi tutkimus osoittaa riskivarauksen erinomaisuuden raportointiteknisenä keinona vähentää tuloksen vaihtelua.

Tuottojen tunnistaminen ja kustannuskertymän ennustaminen pitkäaikaishankkeissa: tapaustutkimus

Tutkimuksen tavoitteena oli kehittää Larox Oyj:n alihankintaprojektien kustannuslaskentaa. Yrityksessä oli havaittu, että pitkäaikaishankkeiden kustan-nusten kertymistä pitää pystyä ennustamaan tarkemmin. Konstruktiivisen tutkimusotteen mukaisesti tutkimuksessa luotiin esiymmärrys kohdeyrityksen nykytilanteesta, perehdyttiin vaikuttavaan lainsäädäntöön ja aikaisempaan tutkimustietoon. Kuvaus nykytilanteesta luotiin kohdeyrityksen ja alihankkijan edustajien haastatteluiden avulla, tutustumalla yrityksen toimintaohjeisiin ja keräämällä tietoa projektien kustannusten kertymisestä. Kerätyn tiedon perusteella luotiin konstruktiot eli ratkaisuehdotukset toiminnan kehittämiseksi. Tutkimuksessa kehitettiin raportointimalli alihankintaprojektien edistymisen raportointiin. Mallin tavoitteena on yhtenäistää alihankkijoiden raportointikäy-täntöjä ja tuottaa sellaista tietoa, jota Larox tarvitsee tuottojen tunnistamista varten. Toinen konkreettinen ratkaisu on alihankintaprojektien kustannuskertymän ennustetyökalu, jonka avulla voidaan ennakoida hankkeen valmiusasteen kehitystä projektin aikana. Malli on rakennettu yhden konetyypin projektien ennustamiseen, mutta siitä voidaan helposti muokata ennustemallit muidenkin projektityyppien tarpeisiin. Tarkempien ennusteiden avulla voidaan kehittää johdon raportointia ja parantaa kassavirtojen ennustettavuutta.

Osatuloutuksen kehittäminen osana ERP -investointia : Case Konecranes

Pitkäaikaishankkeen tuotot ja kustannukset tulee jakaa osatuloutuksen keinoin hankkeen valmistusajalle. Tässä tapaustutkimuksessa tarkastellaan pitkäaikaishankkeiden osatulouttamista osana ERP -investointia. Tavoite on kartoittaa kohdeyrityksen nykyistä osatuloutuskäytäntöä sekä tutkia tähän liittyviä mahdollisia muutoksia ja niiden vaikutuksia. Tutkimuksessa hahmotetaan ensin ERP:n toimintaa ja etenkin SAP:n tarjoamia mahdollisuuksia osatulouttamiselle. Tämän jälkeen selvitetään osatuloutusta koskevaa sääntelyä ja siihen liittyvää muutoshanketta. Empiirisessä osassa osatuloutusta käsitellään kohdeyrityksen näkökulmasta laskelmien, kirjallisuuden ja osallistuvan havainnoinnin kautta. Tutkimuksen mukaan case -yrityksen kannattaa toteuttaa osatuloutusta siten, että myös komponenttikustannukset kerryttävät valmistusastetta. Käytännössä tämän toteuttaminen on kuitenkin erittäin haasteellista. Tutkimus suositteleekin siirtymistä sisäisen laskennan osalta käyttämään komponenttien hinnoittelun pohjana standardikustannushintoja.

Ympäristöjohtaminen tienrakennushankkeessa

Tässä diplomityössä tutkittiin tienrakentamisen aikaista ympäristöjohtamista. Työn tavoitteena oli arvioida jo toteutuneen infrastruktuuriprojektin rakentamisen aikaisen ympäristöjohtamisen onnistumista, verrata toteutunutta ympäristöjohtamista standardiin SFS-EN ISO 14001 ja löytää standardin avulla kehitysehdotukset vastaavanlaisten projektien toteuttamisen aikaiseen ympäristöjohtamiseen tulevaisuudessa. Työ toteutettiin tutkimalla esimerkkiprojektin ympäristönsuojelulle ja ympäristövaikutusten seurannalle tehtyjä suunnitelmia, projektin rakentamisen aikana koottua laatuaineistoa, projektin aikana pidettyjä kokouksia ja tiedotustilaisuuksia sekä haastattelemalla projektin ympäristöjohtamisen toteutuksen kannalta avainhenkilöitä. Tutkimuksessa havaittiin, että jos projektijohto hyödyntäisi ISO 14001 standardia ym-päristöjohtamisensa perustana vastaavanlaisissa tienrakennusprojekteissa, pystyisi se kehittämään projektin urakoitsijoiden hankintavaihetta, projektin aikaista sisäistä ja ulkoista viestintää sekä projektinjohdon toteuttamaa laadunvalvontaa projektin aikana. ISO 14001 standardin hyödyntäminen projektin toteuttamisen aikaisessa ympäristöjoh-tamisessa vaatisi projektin ylimmän johdon sitoutumista standardin noudattamiseen. Ympäristöjohtaminen tulee implementoida osaksi projektijohtamista ja sen toimijoilla tulee olla konkreettista vaikutusvaltaa projektin toimintaan. Projektijohdon sitoutuminen standardin mukaisuuteen antaa puitteet ja käytännöt sekä vaatia että valvoa projektin toimijoiden ympäristönsuojelun toteutumista, raportointia ja viestintää.

Optimal Recycling Combination of Ash in South-East Finland

The present world energy production is heavily relying on the combustion of solid fuels like coals, peat, biomass, municipal solid waste, whereas the share of renewable fuels is anticipated to increase in the future to mitigate climate change. In Finland, peat and wood are widely used for energy production. In any case, the combustion of solid fuels results in generation of several types of thermal conversion residues, such as bottom ash, fly ash, and boiler slag. The predominant residue type is determined by the incineration technology applied, while its composition is primarily relevant to the composition of fuels combusted. An extensive research has been conducted on technical suitability of ash for multiple recycling methods. Most of attention was drawn to the recycling of the coal combustion residues, as coal is the primary solid fuel consumed globally. The recycling methods of coal residues include utilization in a cement industry, in concrete manufacturing, and mine backfilling, to name few. Biomass combustion residues were also studied to some extent with forest fertilization, road construction, and road stabilization being the predominant utilization options. Lastly, residues form municipal solid waste incineration attracted more attention recently following the growing number of waste incineration plants globally. The recycling methods of waste incineration residues are the most limited due to its hazardous nature and varying composition, and include, among others, landfill construction, road construction, mine backfilling. In the study, environmental and economic aspects of multiple recycling options of thermal conversion residues generated within a case-study area were studied. The case-study area was South-East Finland. The environmental analysis was performed using an internationally recognized methodology — life cycle assessment. Economic assessment was conducted applying a widely used methodology — cost-benefit analysis. Finally, the results of the analyses were combined to enable easier comparison of the recycling methods. The recycling methods included the use of ash in forest fertilization, road construction, road stabilization, and landfill construction. Ash landfilling was set as a baseline scenario. Quantitative data about the amounts of ash generated and its composition was obtained from companies, their environmental reports, technical reports and other previously published literature. Overall, the amount of ash in the case-study area was 101 700 t. However, the data about 58 400 t of fly ash and 35 100 t of bottom ash and boiler slag were included in the study due to lack of data about leaching of heavy metals in some cases. The recycling methods were modelled according to the scientific studies published previously. Overall, the results of the study indicated that ash utilization for fertilization and neutralization of 17 600 ha of forest was the most economically beneficial method, which resulted in the net present value increase by 58% compared to ash landfilling. Regarding the environmental impact, the use of ash in the construction of 11 km of roads was the most attractive method with decreased environmental impact of 13% compared to ash landfilling. The least preferred method was the use of ash for landfill construction since it only enabled 11% increase of net present value, while inducing additional 1% of negative impact on the environment. Therefore, a following recycling route was proposed in the study. Where possible and legally acceptable, recycle fly and bottom ash for forest fertilization, which has strictest requirements out of all studied methods. If the quality of fly ash is not suitable for forest fertilization, then it should be utilized, first, in paved road construction, second, in road stabilization. Bottom ash not suitable for forest fertilization, as well as boiler slag, should be used in landfill construction. Landfilling should only be practiced when recycling by either of the methods is not possible due to legal requirements or there is not enough demand on the market. Current demand on ash and possible changes in the future were assessed in the study. Currently, the area of forest fertilized in the case-study are is only 451 ha, whereas about 17 600 ha of forest could be fertilized with ash generated in the region. Provided that the average forest fertilizing values in Finland are higher and the area treated with fellings is about 40 000 ha, the amount of ash utilized in forest fertilization could be increased. Regarding road construction, no new projects launched by the Center of Economic Development, Transport and the Environment in the case-study area were identified. A potential application can be found in the construction of private roads. However, no centralized data about such projects is available. The use of ash in stabilization of forest roads is not expected to increased in the future with a current downwards trend in the length of forest roads built. Finally, the use of ash in landfill construction is not a promising option due to the reducing number of landfills in operation in Finland.

Finnair’s “New Silk Road” in the New Millennium: An Analysis of the Construction of Asia and of the Company

During the past century, an increasingly diverse world provided us with opportunities for intercultural communication; especially the growth of commerce at all levels from domestic to international has made the combination of the theories of intercultural communication and international business necessary. As one of the main beneficiaries in international business in recent years, companies in airline industries have developed their international market. For instance, Finnair has developed its Asian strategy which responds to the increasing market demand for flights from Europe to Asia in the new millennium. Therefore, the company manages marketing communication in a global environment and becomes a suitable case for studying the theories of intercultural communication in the context of international marketing. Finnair implemented a large number of international advertisements to promote its Asian routes, where Asia has been constructed as a number of exotic destinations. Meanwhile, the company itself as a provider of these destinations has also been constructed contrastively. Thus, this thesis aims at research how Finnair constructs Asia and the company itself in the new millennium, and how these constructions compare with the theories of intercultural communication. This research applied the theories of international marketing, intercultural communication and culture. In order to analyze the collected corpora as Finnair’s international advertisements and its annual reports in the new millennium, the methods of content analysis and discourse analysis have been used in this research. As a result, Finnair has purposefully applied the essentialist approach to intercultural communication and constructed Asia as an exotic “Other” due to the company’s market orientation. Meanwhile, Finnair has also constructed the company itself two identities based on the same approach: as an international airline provider between Europe and Asia, as well as a part of Finnish society. The combination of intercultural communication and international marketing theories, together with the combination of the methods of content analysis and discourse analysis ensure the originality of this paper.

Innovative Culture – Searching for Innovativeness in a Construction Company

The purpose of the thesis is to study innovativeness in a context of the construction industry especially the front-end of the innovation process. The construction industry is often considered an old-fashioned manufacturing industry. Innovations and innovativeness are rarely linked to the industry. The construction industry, as well as other industries in Finland, is facing challenges such as productivity, the climate change and internationalization. The meaning of innovations is greater than ever in continuously changing markets, for standing out from competitors or increasing the competitiveness. Traditional production methods, tight building regulations, unique buildings, one-of-a-kind project organizations and highlighting the cheapest price in building contracts are particular challenges in the construction industry. The research questions of the thesis were: - What kind of factors shift the existing company culture towards innovativeness? - What are the phases of the front-end of the innovation process? - What kind of tools and methods enable managing the front-end of the innovation process? The theoretical part of the thesis bases on the literature review. The research methodology of the empirical part was the action research and qualitative approach. Empirical data was collected by the theme interviews from three companies. The results were practical methods and experiences from innovation activities of the companies. The results of the thesis can be clarified as follows: enhancement of the innovation activities requires support and commitment of the top management, innovative culture and innovation strategy. Innovativeness can be promoted by systematical methods for example collecting ideas from employees. Controlling and managing the front-end phase is essential to succeeding. Despite that managing the front-end is the most challenging part of the innovation process, development and management of that save companies’ money, resources and prevents useless investments. Further clarification and studies are needed to find out furthermore functional tools and methods to manage innovations and implementing them to the culture of the companies.

Privity of Contract and Third Party Rights in European Construction Projects

Privity of contract has lately been criticized in several European jurisdictions, particu-larly due to the onerous consequences it gives rise to in arrangements typical for the modern exchange such as chains of contracts. Privity of contract is a classical premise of contract law, which prohibits a third party to acquire or enforce rights under a contract to which he is not a party. Such a premise is usually seen to be manifested in the doctrine of privity of contract developed under common law, however, the jurisdictions of continental Europe do recognize a corresponding starting point in contract law. One of the traditional industry sectors affected by this premise is the construction industry. A typical large construction project includes a contractual chain comprised of an employer, a main contractor and a subcontractor. The employer is usually dependent on the subcontractor's performance, however, no contractual nexus exists between the two. Accordingly, the employer might want to circumvent the privity of contract in order to reach the subcontractor and to mitigate any risks imposed by such a chain of contracts. From this starting point, the study endeavors to examine the concept of privity of con-tract in European jurisdictions and particularly the methods used to circumvent the rule in the construction industry practice. For this purpose, the study employs both a com-parative and a legal dogmatic method. The principal aim is to discover general principles not just from a theoretical perspective, but from a practical angle as well. Consequently, a considerable amount of legal praxis as well as international industry forms have been used as references. The most important include inter alia the model forms produced by FIDIC as well as Olli Norros' doctoral thesis "Vastuu sopimusketjussa". According to the conclusions of this study, the four principal ways to circumvent privity of contract in European construction projects include liability in a chain of contracts, collateral contracts, assignment of rights as well as security instruments. The contempo-rary European jurisdictions recognize these concepts and the references suggest that they are an integral part of the current market practice. Despite the fact that such means of circumventing privity of contract raise a number of legal questions and affect the risk position of particularly a subcontractor considerably, it seems that the impairment of the premise of privity of contract is an increasing trend in the construction industry.

Productivity development at construction branch after the last recession

EPC 2006 kansainvälinen tuottavuuskonfrenssi