Data-parallel computation in parallel and distributed environments

The past few decades have seen a considerable increase in the number of parallel and distributed systems. With the development of more complex applications, the need for more powerful systems has emerged and various parallel and distributed environments have been designed and implemented. Each of the environments, including hardware and software, has unique strengths and weaknesses. There is no single parallel environment that can be identified as the best environment for all applications with respect to hardware and software properties. The main goal of this thesis is to provide a novel way of performing data-parallel computation in parallel and distributed environments by utilizing the best characteristics of difference aspects of parallel computing. For the purpose of this thesis, three aspects of parallel computing were identified and studied. First, three parallel environments (shared memory, distributed memory, and a network of workstations) are evaluated to quantify theirsuitability for different parallel applications. Due to the parallel and distributed nature of the environments, networks connecting the processors in these environments were investigated with respect to their performance characteristics. Second, scheduling algorithms are studied in order to make them more efficient and effective. A concept of application-specific information scheduling is introduced. The application- specific information is data about the workload extractedfrom an application, which is provided to a scheduling algorithm. Three scheduling algorithms are enhanced to utilize the application-specific information to further refine their scheduling properties. A more accurate description of the workload is especially important in cases where the workunits are heterogeneous and the parallel environment is heterogeneous and/or non-dedicated. The results obtained show that the additional information regarding the workload has a positive impact on the performance of applications. Third, a programming paradigm for networks of symmetric multiprocessor (SMP) workstations is introduced. The MPIT programming paradigm incorporates the Message Passing Interface (MPI) with threads to provide a methodology to write parallel applications that efficiently utilize the available resources and minimize the overhead. The MPIT allows for communication and computation to overlap by deploying a dedicated thread for communication. Furthermore, the programming paradigm implements an application-specific scheduling algorithm. The scheduling algorithm is executed by the communication thread. Thus, the scheduling does not affect the execution of the parallel application. Performance results achieved from the MPIT show that considerable improvements over conventional MPI applications are achieved.

Genes outside The Hla Region affecting Susceptibility to Type 1 Diabetes - The Role of Iddm2 and Iddm9 in the Finnish Population

Tyypin 1 diabeteksen perinnöllinen alttius Suomessa - HLA-alueen ulkopuolisten alttiuslokusten IDDM2 ja IDDM9 rooli taudin periytymisessä HLA-alue, joka sijaitsee kromosomissa 6p21.3, vastaa noin puolesta perinnöllisestä alttiudesta sairastua tyypin 1 diabetekseen. Myös HLA-alueen ulkopuolisten lokusten on todettu liittyvän sairausalttiuteen. Näistä kolmen lokuksen on varmistettu olevan todellisia alttiuslokuksia ja lisäksi useiden muiden, vielä varmistamattomien lokusten, on todettu liittyvän sairausalttiuteen. Tässä tutkimuksessa 12:n HLA-alueen ulkopuolisen alttiuslokuksen kytkentä tyypin 1 diabetekseen tutkittiin käyttäen 107:aa suomalaista multiplex-perhettä. Jatkotutkimuksessa analysoitiin IDDM9-alueen kytkentä ja assosiaatio sairauteen laajennetuissa perhemateriaaleissa sekä IDDM2-alueen mahdollinen interaktio HLA-alueen kanssa sairauden muodostumisessa. Lisäksi suoritettiin IDDM2-alueen suojaavien haplotyyppien alatyypitys tarkoituksena tutkia eri haplotyyppien käyttökelpoisuutta sairastumisriskin tarkempaa ennustamista varten. Ensimmäisessä kytkentätutkimuksessa ei löytynyt koko genomin tasolla merkitsevää tai viitteellistä kytkentää tutkituista HLA-alueen ulkopuolisista lokuksista. Voimakkain havaittu nimellisen merkitsevyyden tavoittava kytkentä nähtiin IDDM9-alueen markkerilla D3S3576 (MLS=1.05). Tutkimuksessa ei kyetty varmistamaan tai sulkemaan pois aiempia kytkentähavaintoja tutkituilla lokuksilla, mutta IDDM9-alueen jatkotutkimuksessa havaittu voimakas kytkentä (MLS=3.4) ja merkitsevä assosiaatio (TDT p=0.0002) viittaa vahvasti siihen, että 3q21-alueella sijaitsee todellinen tyypin 1 diabeteksen alttiusgeeni, jolloin alueen kattava assosiaatiotutkimus olisi perusteltu jatkotoimenpide. Sairauteen altistava IDDM2-alueen MspI-2221 genotyyppi CC oli nimellisesti yleisempi matalan tai kohtalaisen HLA-sairastumisriskin diabeetikoilla, verrattuna korkean HLA-riskin potilaisiin (p=0.05). Myös genotyyppijakauman vertailu osoitti merkitsevää eroa ryhmien välillä (p=0.01). VNTR-haplotyyppitutkimus osoitti, että IIIA/IIIA-homotsygootin sairaudelta suojaava vaikutus on merkitsevästi voimakkaampi kuin muiden luokka III:n genotyypeillä. Nämä tulokset viittaavat IDDM2-HLA -vuorovaikutukseen sekä siihen että IDDM2-alueen haplotyyppien välillä esiintyy etiologista heterogeniaa. Tämän johdosta IDDM2-alueen haplotyyppien tarkempi määrittäminen voisi tehostaa tyypin 1 diabeteksen riskiarviointia.

Computing the persistent homology of range images with alpha shapes

Laser scanning is becoming an increasingly popular method for measuring 3D objects in industrial design. Laser scanners produce a cloud of 3D points. For CAD software to be able to use such data, however, this point cloud needs to be turned into a vector format. A popular way to do this is to triangulate the assumed surface of the point cloud using alpha shapes. Alpha shapes start from the convex hull of the point cloud and gradually refine it towards the true surface of the object. Often it is nontrivial to decide when to stop this refinement. One criterion for this is to do so when the homology of the object stops changing. This is known as the persistent homology of the object. The goal of this thesis is to develop a way to compute the homology of a given point cloud when processed with alpha shapes, and to infer from it when the persistent homology has been achieved. Practically, the computation of such a characteristic of the target might be applied to power line tower span analysis.

Nursing Advocacy: A concept clarification in context of procedural pain care

The purpose of this study was to clarify the concept of advocacy in context of procedural pain care and to investigate the implementation of advocacy in that context. First, the concept of advocacy was described on the basis of a literature review (n = 89 empirical studies from 1990 to 2003). Then, the concept was described in the context of procedural pain care on the basis of interview data (n = 22 patients, 21 nurses) in a medical and surgical context. In the second phase, an instrument exploring the content of advocacy and the implementation of advocacy in context of procedural pain care was developed and validated. Then, the content of advocacy and implementation of it was explored in a sample of otolaryngeal patients (n = 405) and nurses (n = 118) in 12 hospitals. In the third phase, an update literature review (n = 35 empirical studies from 2003 to 2007) was conducted, and all data from phases one and two were reviewed in order to refine the elements the concept of advocacy, and the relationships between these elements. As a result of this study, advocacy in context of procedural pain care was defined as consisting of the dual aspects of patient advocacy and professional advocacy, and called nursing advocacy. It was divided into dimensions and subdimensions in which patient and nurse empowerment seems to play a vital role. All the data obtained lend support to this definition of nursing advocacy. Patients and nurses felt that nearly all of the activities that they considered as advocacy were implemented.

Quasiconformal mappings and inequalities involving special functions

This PhD thesis in Mathematics belongs to the field of Geometric Function Theory. The thesis consists of four original papers. The topic studied deals with quasiconformal mappings and their distortion theory in Euclidean n-dimensional spaces. This theory has its roots in the pioneering papers of F. W. Gehring and J. Väisälä published in the early 1960’s and it has been studied by many mathematicians thereafter. In the first paper we refine the known bounds for the so-called Mori constant and also estimate the distortion in the hyperbolic metric. The second paper deals with radial functions which are simple examples of quasiconformal mappings. These radial functions lead us to the study of the so-called p-angular distance which has been studied recently e.g. by L. Maligranda and S. Dragomir. In the third paper we study a class of functions of a real variable studied by P. Lindqvist in an influential paper. This leads one to study parametrized analogues of classical trigonometric and hyperbolic functions which for the parameter value p = 2 coincide with the classical functions. Gaussian hypergeometric functions have an important role in the study of these special functions. Several new inequalities and identities involving p-analogues of these functions are also given. In the fourth paper we study the generalized complete elliptic integrals, modular functions and some related functions. We find the upper and lower bounds of these functions, and those bounds are given in a simple form. This theory has a long history which goes back two centuries and includes names such as A. M. Legendre, C. Jacobi, C. F. Gauss. Modular functions also occur in the study of quasiconformal mappings. Conformal invariants, such as the modulus of a curve family, are often applied in quasiconformal mapping theory. The invariants can be sometimes expressed in terms of special conformal mappings. This fact explains why special functions often occur in this theory.

Optimization of the refining and shoe press in board production

Optimointi on tavallinen toimenpide esimerkiksi prosessin muuttamisen tai uusimisen jälkeen. Optimoinnilla pyritään etsimään vaikkapa tiettyjen laatuominaisuuksien kannalta paras tapa ajaa prosessia tai erinäisiä prosessin osia. Tämän työn tarkoituksena oli investoinnin jälkeen optimoida neljä muuttujaa, erään runkoon menevän massan jauhatus ja määrä, märkäpuristus sekä spray –tärkin määrä, kolmen laatuominaisuuden, palstautumislujuuden, geometrisen taivutusjäykkyyden ja sileyden, suhteen. Työtä varten tehtiin viisi tehdasmittakaavaista koeajoa. Ensimmäisessä koeajossa oli tarkoitus lisätä vettä tai spray –tärkkiä kolmikerroskartongin toiseen kerrosten rajapintaan, toisessa koeajossa muutettiin, jo aiemmin mainitun runkoon menevän massan jauhatusta ja jauhinkombinaatioita. Ensimmäisessä koeajossa tutkittiin palstautumislujuuden, toisessa koeajossa muiden lujuusominaisuuksien kehittymistä. Kolmannessa koeajossa tutkittiin erään runkoon menevän massan jauhatuksen ja määrän sekä kenkäpuristimen viivapaineen muutoksen vaikutusta palstautumislujuuteen, geometriseen taivutusjäykkyyteen sekä sileyteen. Neljännessä koeajossa yritettiin toistaa edellisen koeajon paras piste ja parametreja hieman muuttamalla saada aikaan vieläkin paremmat laatuominaisuudet. Myös tässä kokeessa tutkittiin muuttujien vaikutusta palstautumislujuuteen, geometriseen taivutusjäykkyyteen ja sileyteen. Viimeisen kokeen tarkoituksena oli tutkia samaisen runkoon menevän massan vähentämisen vaikutusta palstautumislujuuteen. Erinäisistä vastoinkäymisistä johtuen, koeajoista saadut tulokset jäivät melko laihoiksi. Kokeista kävi kuitenkin ilmi, että lujuusominaisuudet eivät parantuneet, vaikka jauhatusta jatkettiin. Lujuusominaisuuksien kehittymisen kannalta turha jauhatus pystyttiin siis jättämään pois ja näin säästämään energiaa sekä säästymään pitkälle viedyn jauhatuksen mahdollisesti aiheuttamilta muilta ongelmilta. Vähemmällä jauhatuksella ominaissärmäkuorma saatiin myös pidettyä alle tehtaalla halutun tason. Puuttuvat lujuusominaisuudet täytyy saavuttaa muilla keinoin.

Rasvankestävät paperit ja kartongit

Rasvankestävyydellä tarkoitetaan sitä, että materiaali hylkii tai kestää rasvaa tietyn ajan läpäisemättä sen pintaa. Rasvankestäviä papereita ja kartonkeja löytyy kaikkialta. Erilaiset ruuanvalmistuspaperit, kuten esimerkiksi leivinpaperi ja voipaperi, ovat rasvankestäviä. Myös pakkauksissa käytetään paljon rasvankestäviä papereita ja kartonkeja. Rasvankestäviltä tuotteilta vaaditaan erilaisia ominaisuuksia riippuen niiden käyttötarkoituksesta. Pakkausmateriaaleilta vaaditaan esimerkiksi lujuutta ja kestävyyttä fyysistä rasitusta, valoa, hajuja ja mikrobeja vastaan. Ruuanvalmistusmateriaaleilta vaaditaan puolestaan lujuutta ja kestävyyttä lämpöä, kosteutta ja fyysistä rasitusta vastaan. Rasvankestäviltä papereilta vaaditaan rasvankestävyyden lisäksi hyvää vetolujuutta, märkälujuutta ja hyviä optisia ominaisuuksia. Neliömassan tulee asettua 20─80 g/m2 välille ja metallipitoisuudet eivät saa olla liian korkeat. Myös tuotteiden kierrätettävyys on nostanut asemaansa viimeaikoina. Tuotteen tuotannon ja itse tuotteen ympäristöystävällisyys ovat todella arvostettuja kuluttajan, tuottajan, Suomen, EU:n ja koko maailman näkökulmista. Jotta tuotteesta saadaan rasvankestävää, vaaditaan siltä erilaisia barrier-ominaisuuksia. Rasvankestävällä paperilla vaaditaan hyviä barrier-ominaisuuksia esimerkiksi rasvan, ilman, veden, vesihöyryn sekä hapen läpäisevyyksissä. Rasvankestäviä papereita ja kartonkeja voidaan valmistaa kemiallisilla ja mekaanisilla tavoilla. Happokäsittely ja fluorokemikaalien lisääminen ovat kemiallisia tapoja, kun taas sellun jauhaminen pitkään matalassa lämpötilassa on mekaaninen tapa valmistaa rasvankestävää paperia. Näiden tapojen lisäksi rasvankestäviä papereita voidaan tehdä erilaisten pinnoitusten avulla. Erilaiset muovit ovat yleisemmin käytettyjä pinnoitemateriaaleja. Esimerkiksi PE- ja PET-päällysteet ovat käytettyjä rasvankestävissä tuotteissa. Viime aikoina on kehitetty paljon erilaisia biomateriaaleja, joista voidaan tehdä rasvankestävä pinnoite. Lipideistä, hydrokolloideista ja erilaisista komposiiteista voidaan luoda uusien tekniikoiden avulla rasvankestäviä pinnoitteita. Rasvankestävyydestä voidaan saada jonkinlainen käsitys WVTR-asteen, Cobb-arvon ja kontaktikulman mittausten avulla. Rasvankestävyyttä voidaan myös mitata erilaisten standarditestien avulla. TAPPI:lla, ISO:lla ja ASTM:llä on useita erilaisia standardeja. Lähes kaikissa rasvankestävyysstandardeissa tuloksen saaminen perustuu visuaaliseen havaintoon, mikä aiheuttaa välillä hankaluuksia tulosten luotettavuuteen, koska tuloksen määrittää ihmissilmä, ja kaikilla testin tekijöillä on erilainen silmä, joka aistii eri tavalla.

Management of Soft Information in Sales and Operations Planning

With a Sales and Operations Planning (S&OP) process, a company aims to manage the demand and supply by planning and forecasting. The studied company uses an integrated S&OP process to improve the company's operations. The aim of this thesis is to develop this business process by finding the best possible way to manage the soft information in S&OP, whilst also understanding the importance and types (assumptions, risks and opportunities) of soft information in S&OP. The soft information in S&OP helps to refine future S&OP planning, taking into account the uncertainties that affect the balance of the long-term demand and supply (typically 12-18 months). The literature review was used to create a framework for soft information management process in S&OP. There were not found a concrete way how to manage soft information in the existing literature. In consequence of the poor literature available the Knowledge Management literature was used as the base for the framework creation, which was seen in the very same type of information management like the soft information management is. The framework created a four-stage process to manage soft information in S&OP that included also the required support systems. First phase is collecting and acquiring soft information in S&OP, which include also categorization. The categorization was the cornerstone to identify different requirements that needs to be taken into consideration when managing soft information in S&OP process. The next phase focus on storing data, which purpose is to ensure the soft information is managed in a common system (support system) in a way that the following phase makes it available to users in S&OP who need by help of sharing and applications process. The last phase target is to use the soft information to understand assumptions and thoughts of users behind the numbers in S&OP plans. With this soft management process the support system will have a key role. The support system, like S&OP tool, ensures that soft information is stored in the right places, kept up-to-date and relevancy. The soft information management process in S&OP strives to improve the relevant soft information documenting behind the S&OP plans into the S&OP support system. The process offers an opportunity to individuals to review, comment and evaluate soft information in S&OP made by their own or others. In the case company it was noticed that without a properly documented and distributed soft information in S&OP it was seen to cause mistrust towards the planning.

Defining Sales and Operations Planning Process in an Environmental Management Company

Sales and operations research publications have increased significantly in the last decades. The concept of sales and operations planning (S&OP) has gained increased recognition and has been put forward as the area within Supply Chain Management (SCM). Development of S&OP is based on the need for determining future actions, both for sales and operations, since off-shoring, outsourcing, complex supply chains and extended lead times make challenges for responding to changes in the marketplace when they occur. Order intake of the case company has grown rapidly during the last years. Along with the growth, new challenges considering data management and information flow have arisen due to increasing customer orders. To manage these challenges, case company has implemented S&OP process, though initial process is in early stage and due to this, the process is not managing the increased customer orders adequately. Thesis objective is to explore extensively the S&OP process content of the case company and give further recommendations. Objectives are categorized into six different groups, to clarify the purpose of this thesis. Qualitative research methods used are active participant observation, qualitative interviews, enquiry, education, and a workshop. It is notable that demand planning was felt as cumbersome, so it is typically the biggest challenge in S&OP process. More proactive the sales forecasting can be, more expanded the time horizon of operational planning will turn out. S&OP process is 60 percent change management, 30 percent process development and 10 percent technology. The change management and continuous improvement can sometimes be arduous and set as secondary. It is important that different people are required to improve the process and the process is constantly evaluated. As well as, process governance is substantially in a central role and it has to be managed consciously. Generally, S&OP process was seen important and all the stakeholders were committed to the process. Particular sections were experienced more important than others, depending on the stakeholders’ point of views. Recommendations to objective groups are evaluated by the achievable benefit and resource requirement. The urgent and easily implemented improvement recommendations should be executed firstly. Next steps are to develop more coherent process structure and refine cost awareness. Afterwards demand planning, supply planning, and reporting should be developed more profoundly. For last, information technology system should be implemented to support the process phases.

Nichesourcing The Uralic Languages For The Benefit Of Linguistic Research And Lingual Societies

The emerging technologies have recently challenged the libraries to reconsider their role as a mere mediator between the collections, researchers, and wider audiences (Sula, 2013), and libraries, especially the nationwide institutions like national libraries, haven’t always managed to face the challenge (Nygren et al., 2014). In the Digitization Project of Kindred Languages, the National Library of Finland has become a node that connects the partners to interplay and work for shared goals and objectives. In this paper, I will be drawing a picture of the crowdsourcing methods that have been established during the project to support both linguistic research and lingual diversity. The National Library of Finland has been executing the Digitization Project of Kindred Languages since 2012. The project seeks to digitize and publish approximately 1,200 monograph titles and more than 100 newspapers titles in various, and in some cases endangered Uralic languages. Once the digitization has been completed in 2015, the Fenno-Ugrica online collection will consist of 110,000 monograph pages and around 90,000 newspaper pages to which all users will have open access regardless of their place of residence. The majority of the digitized literature was originally published in the 1920s and 1930s in the Soviet Union, and it was the genesis and consolidation period of literary languages. This was the era when many Uralic languages were converted into media of popular education, enlightenment, and dissemination of information pertinent to the developing political agenda of the Soviet state. The ‘deluge’ of popular literature in the 1920s to 1930s suddenly challenged the lexical orthographic norms of the limited ecclesiastical publications from the 1880s onward. Newspapers were now written in orthographies and in word forms that the locals would understand. Textbooks were written to address the separate needs of both adults and children. New concepts were introduced in the language. This was the beginning of a renaissance and period of enlightenment (Rueter, 2013). The linguistically oriented population can also find writings to their delight, especially lexical items specific to a given publication, and orthographically documented specifics of phonetics. The project is financially supported by the Kone Foundation in Helsinki and is part of the Foundation’s Language Programme. One of the key objectives of the Kone Foundation Language Programme is to support a culture of openness and interaction in linguistic research, but also to promote citizen science as a tool for the participation of the language community in research. In addition to sharing this aspiration, our objective within the Language Programme is to make sure that old and new corpora in Uralic languages are made available for the open and interactive use of the academic community as well as the language societies. Wordlists are available in 17 languages, but without tokenization, lemmatization, and so on. This approach was verified with the scholars, and we consider the wordlists as raw data for linguists. Our data is used for creating the morphological analyzers and online dictionaries at the Helsinki and Tromsø Universities, for instance. In order to reach the targets, we will produce not only the digitized materials but also their development tools for supporting linguistic research and citizen science. The Digitization Project of Kindred Languages is thus linked with the research of language technology. The mission is to improve the usage and usability of digitized content. During the project, we have advanced methods that will refine the raw data for further use, especially in the linguistic research. How does the library meet the objectives, which appears to be beyond its traditional playground? The written materials from this period are a gold mine, so how could we retrieve these hidden treasures of languages out of the stack that contains more than 200,000 pages of literature in various Uralic languages? The problem is that the machined-encoded text (OCR) contains often too many mistakes to be used as such in research. The mistakes in OCRed texts must be corrected. For enhancing the OCRed texts, the National Library of Finland developed an open-source code OCR editor that enabled the editing of machine-encoded text for the benefit of linguistic research. This tool was necessary to implement, since these rare and peripheral prints did often include already perished characters, which are sadly neglected by the modern OCR software developers, but belong to the historical context of kindred languages and thus are an essential part of the linguistic heritage (van Hemel, 2014). Our crowdsourcing tool application is essentially an editor of Alto XML format. It consists of a back-end for managing users, permissions, and files, communicating through a REST API with a front-end interface—that is, the actual editor for correcting the OCRed text. The enhanced XML files can be retrieved from the Fenno-Ugrica collection for further purposes. Could the crowd do this work to support the academic research? The challenge in crowdsourcing lies in its nature. The targets in the traditional crowdsourcing have often been split into several microtasks that do not require any special skills from the anonymous people, a faceless crowd. This way of crowdsourcing may produce quantitative results, but from the research’s point of view, there is a danger that the needs of linguists are not necessarily met. Also, the remarkable downside is the lack of shared goal or the social affinity. There is no reward in the traditional methods of crowdsourcing (de Boer et al., 2012). Also, there has been criticism that digital humanities makes the humanities too data-driven and oriented towards quantitative methods, losing the values of critical qualitative methods (Fish, 2012). And on top of that, the downsides of the traditional crowdsourcing become more imminent when you leave the Anglophone world. Our potential crowd is geographically scattered in Russia. This crowd is linguistically heterogeneous, speaking 17 different languages. In many cases languages are close to extinction or longing for language revitalization, and the native speakers do not always have Internet access, so an open call for crowdsourcing would not have produced appeasing results for linguists. Thus, one has to identify carefully the potential niches to complete the needed tasks. When using the help of a crowd in a project that is aiming to support both linguistic research and survival of endangered languages, the approach has to be a different one. In nichesourcing, the tasks are distributed amongst a small crowd of citizen scientists (communities). Although communities provide smaller pools to draw resources, their specific richness in skill is suited for complex tasks with high-quality product expectations found in nichesourcing. Communities have a purpose and identity, and their regular interaction engenders social trust and reputation. These communities can correspond to research more precisely (de Boer et al., 2012). Instead of repetitive and rather trivial tasks, we are trying to utilize the knowledge and skills of citizen scientists to provide qualitative results. In nichesourcing, we hand in such assignments that would precisely fill the gaps in linguistic research. A typical task would be editing and collecting the words in such fields of vocabularies where the researchers do require more information. For instance, there is lack of Hill Mari words and terminology in anatomy. We have digitized the books in medicine, and we could try to track the words related to human organs by assigning the citizen scientists to edit and collect words with the OCR editor. From the nichesourcing’s perspective, it is essential that altruism play a central role when the language communities are involved. In nichesourcing, our goal is to reach a certain level of interplay, where the language communities would benefit from the results. For instance, the corrected words in Ingrian will be added to an online dictionary, which is made freely available for the public, so the society can benefit, too. This objective of interplay can be understood as an aspiration to support the endangered languages and the maintenance of lingual diversity, but also as a servant of ‘two masters’: research and society.

Responding to Changing Student Demographics in Finland: A Study of Teachers’ Developing Cultural Competence

The aim of this dissertation was to examine the skills and knowledge that pre-service teachers and teachers have and need about working with multilingual and multicultural students from immigrant backgrounds. The specific goals were to identify pre-service teachers’ and practising teachers’ current knowledge and awareness of culturally and linguistically responsive teaching, identify a profile of their strengths and needs, and devise appropriate professional development support and ways to prepare teachers to become equitable culturally responsive practitioners. To investigate these issues, the dissertation reports on six original empirical studies within two groups of teachers: international pre-service teacher education students from over 25 different countries as well as pre-service and practising Finnish teachers. The international pre-service teacher sample consisted of (n = 38, study I; and n = 45, studies II-IV) and the pre-service and practising Finnish teachers sample encompassed (n = 89, study V; and n = 380, study VI). The data used were multi-source including both qualitative (students’ written work from the course including journals, final reflections, pre- and post-definition of key terms, as well as course evaluation and focus group transcripts) and quantitative (multi-item questionnaires with open-ended options), which enhanced the credibility of the findings resulting in the triangulation of data. Cluster analytic procedures, multivariate analysis of variance (MANOVA), and qualitative analyses mostly Constant Comparative Approach were used to understand pre-service teachers’ and practising teachers’ developing cultural understandings. The results revealed that the mainly white / mainstream teacher candidates in teacher education programmes bring limited background experiences, prior socialisation, and skills about diversity. Taking a multicultural education course where identity development was a focus, positively influenced teacher candidates’ knowledge and attitudes toward diversity. The results revealed approaches and strategies that matter most in preparing teachers for culturally responsive teaching, including but not exclusively, small group activities and discussions, critical reflection, and field immersion. This suggests that there are already some tools to address the need for the support needed to teach successfully a diversity of pupils and provide in-service training for those already practising the teaching profession. The results provide insight into aspects of teachers’ knowledge about both the linguistic and cultural needs of their students, as well as what constitutes a repertoire of approaches and strategies to assure students’ academic success. Teachers’ knowledge of diversity can be categorised into sound awareness, average awareness, and low awareness. Knowledge of diversity was important in teachers’ abilities to use students’ language and culture to enhance acquisition of academic content, work effectively with multilingual learners’ parents/guardians, learn about the cultural backgrounds of multilingual learners, link multilingual learners’ prior knowledge and experience to instruction, and modify classroom instruction for multilingual learners. These findings support the development of a competency based model and can be used to frame the studies of pre-service teachers, as well as the professional development of practising teachers in increasingly diverse contexts. The present set of studies take on new significance in the current context of increasing waves of migration to Europe in general and Finland in particular. They suggest that teacher education programmes can equip teachers with the necessary attitudes, skills, and knowledge to enable them work effectively with students from different ethnic and language backgrounds as they enter the teaching profession. The findings also help to refine the tools and approaches to measuring the competencies of teachers teaching in mainstream classrooms and candidates in preparation.

Facilitating corporate entrepreneurial behavior: A study of corporate entrepreneurial behavior in corporate banking

This study discusses the pronounced importance of corporate entrepreneurial behavior, CEB, facilitation and enablement as a key dimension in the rapidly changing business environment within companies. The research target is a large finance company in Finland, where regulations, compliance and processes restrict and refine extensively business approach. The purpose of this study is to foster the understanding of corporate entrepreneurial behavior and requirements and identify the supporters and inhibitors of facilitation of it. Furthermore, this study examines who should be driving the implementation and offer concrete outcome for the company to get the facilitation started and berth it as part of the organizational culture and values. The theoretical background is constructed from literature related to concept of corporate entrepreneurial behavior, factors supporting and hindering the facilitation based on previous studies and innovation management. Furthermore theoretical framework of middle managers entrepreneurial behavior in facilitation process was researched. Additionally top down and bottom up approach of conversational space building within the organization in order to foster innovation and involving mindset and behavior was in the core literature. The empirical research conducted for the study consists three parts; innovation audit questionnaire, semi-structured interviews and secondary data from previously made research within the case company. Questionnaire and interviews were targeted to eight middle managers within the company, the head of branch regions in corporate segment. The secondary data was collected from over 300 employees in the case company by an external company. Research results were analyzed mainly by themes and source division in adaption with the theoretical framework. The study finds that facilitation of CEB should be a strategic choice and requires strong management support and examples. Behavior should be involved with organizational culture, values, structures and processes. The companies´ willingness to take risks and encourage employees at all levels to participate and be involved by taking ownership and responsibility is in the core. CEB is found to be a key dimension in increasing employee satisfaction and engagement, competitive advantages and economic growth of companies. There is increased interest towards CEB in the case company but there is lack in the mutual consensus of it. CEB is not in the strategy although the mindset and support from management is in place. There is no concrete enablement and space for innovation and CEB although the platform would be receptive. Further research is needed to build shared vision of CEB and how to make it a part of the organizational culture and values in addition to building the conversational space.

Työn osituksen kehittäminen kustannusten kirjaamisen ja seurannan tarkentamiseksi projekteissa

Työn päätavoite on selvittää kohdeyrityksen projektien tehtävien jakoon ja työn jäsentämiseen käytettävän työn osituksen rakenteen ongelmat projektikustannusten kirjaamisessa. Tämän lisäksi tavoitellaan kustannusläpi-näkyvyyden kasvua, mittaamisen helpottumista ja kustannusarvioinnin tarkentumista antamalla kehitys-ehdotuksia rakenteen tarkentamiseksi ja yksinkertaistamiseksi. Työ on laadullista ja toiminnallista tapaus-tutkimusta. Teoriaosuuden aineistona on tieteellisiä artikkeleita, kirjoja, lehtiä ja muita aiheeseen liittyviä julkaisuja. Empiirinen osa koostuu yrityksen sisäisistä haastatteluista sekä esikuva-analyysihaastatteluista. Kehitysehdotusten analysointiin ja valintaan käytetään GAP–analyysiä ja toteutettavuustarkastelua. Työn keskeisimpänä tuloksena on neljä kehitysehdotusta, jotka pohjautuvat teorioiden suosituksiin työn osituksen rakenteen sisällöstä. Tällä työllä pyritään myös tuomaan esille kehitystarvetta yrityksessä ja antamaan suunta sekä alkusysäys kehitysprosessille kohti toimivampaa projektien kustannusseurantaa.

Ultraäänen käyttö ligniinin ja hemiselluloosan ertuksessa puu-uutteesta

Puusta valmistetussa puu-uutteessa on puun polymeerejä, ligniiniä ja hemiselluloosaa, joiden käyttöä halutaan lisätä biojalostamoissa. Polymeerit tulisi erottaa mahdollisimman puhtaasti jatkojalostusta varten. Erotus voidaan tehdä ultrasuodatuksella. Puu-uutetta pitää kuitenkin esikäsitellä, sillä polymeerit ovat lähes samankokoisia. Ultraäänikäsittelyn on osoitettu kasvattavan ligniinin moolimassaa, jolloin myös erotus parantuisi. Ultraäänikäsittely on aikaisemmin käytettyihin esikäsittelymenetelmiin verrattuna ympäristöystävällisempi, sillä sen käytössä ei tarvita erillisiä kemikaaleja. Tämän työn tavoitteena oli selvittää, kuinka ultraäänikäsittely vaikuttaa ligniinin ja hemiselluloosan erotukseen PHWE-puu-uutteesta. Näytteen pH säädettiin emäksiseksi, näyte ultraäänikäsiteltiin eri koeolosuhteissa ja ultrasuodatettiin. Ultraäänikäsiteltyä näytettä verrattiin käsittelemättömään referenssinäytteeseen. Näytteet analysoitiin UV- ja TOC-analyyseillä konsentraattien ligniini- ja hiilipitoisuuksien selvittämiseksi. Lisäksi tarkasteltiin suodatusprosessin parametreja. Tulosten perusteella ultraäänikäsittely paransi ligniinin ja hemiselluloosan erotusta erilleen. Erotus parani eniten pH 12 -näytteessä, joka ultraäänikäsiteltiin 65 °C lämpötilassa, 45 minuutin ajan laiteteholla 175 W.