Vauhtikausi. Autoilun sukupuoli 1920-luvun Suomessa

The Age of Speed:Automobility’s Gender in the 1920s Finland The aim of this study is to analyze the connections between automobility and gender in Finland in the 1920s. In this study it is argued that the 1920s was the significant era in the Finnish history of automobility when many of the long-lasting gendered notions and cultural understandings were constructed. This study combines cultural history of technology with gender analysis. As the previous research on gender and technology has recognized, technology is a significant site of gender negotiations. Both from the cultural historical perspective and a gender perspective it is important to understand both technology and gender as cultural constructions. They were linked together and constructed each other. In other words: technology shapes gender and gender shapes technology. Historians of technology like Nina Lerman, Ruth Oldenziel and Arwen Mohun have argued that both gender and technology are about power: social, cultural, economic and political. In this study automobility means technology that can be analyzed in layers of identity, structures, institutions and representations. The source material consists of various types of historical sources, magazines and journals, advertisements, archival material together with films and literature. In the previous studies of the history of automobility gender has often been neglected. The term “gender” has also quite often been misunderstood. Some studies in the field have only focused on the early female drivers. However, far too little attention has been paid to the question, why automobility was considered as masculine sphere only. This study aims to give new insights to the previous interpretations of the history of automobility. As in various other countries also in Finland, the decade of the 1920s is characterized as a period of “modern times.” It was also the era of the automobiles. Although the number of cars in Finland was still low compared to the other European countries and the USA, in press, films and literature, images of automobiles and new women – and men – on the wheel became as an emblem of a new era. The thesis consists of three main chapters. The first main chapter focuses on the conflicts between drivers and non-drivers. The study shows how in the debate of the automobility “a driver” was constantly referred as a man and “a pedestrian” accordingly a woman, even though in the reality there were as much men and women walking on the streets and the roads. Thus, the public debate constructed and reconstructed the gendered traffic system where men were playing the key role. The second main chapter of the study analyses the automobile clubs and the cultural representations. The chapter answers the question how the concept of a driver was gendered. The Automobile clubs and the organizations of professional drivers were in a significant role in developing the early history of traffic in Finland. The Finnish Automobile Club (Suomen Automobiili Klubi, founded in 1919) was the oldest and the most powerful of all automobile organizations. The Finnish Automobile Club accepted women as members from the very beginning. The membership was strictly limited to the upper class and the very first female members were wives and daughters of the male members. However, Doctor of medicine and surgery 316 Karolina Eskelin (1867-1936) the founding member of the Club was an exception to that convention. The male members of the Finnish Automobile Club attended official international meetings and consulted Finnish authorities in traffic and road questions, whereas, female members joined car trips, picnics and social gatherings arranged by the club. Few young female members of the club drove in races and gross-country-tours. The cultural representations of drivers in the Finnish media in the 1920s both deconstructed and reconstructed the concept of gender. In Finnish press in general, motoring was seen as male dominated area. Men were represented as the experts of the automobility. The drivers��� uniforms and the automobile clubs underlined professionalism and expertise which, thus, got masculine meaning. Women were beautiful accessories in the car ads, but they were also becoming a new consumer group in the market. The representations of the female and the male drivers influenced and shaped actively the understandings of femininity and masculinity. In the third main chapter the analysis focuses on the automobile as an artifact.The automobile was considered as an artifact that primarily belonged to the masculine domain. However, the representations of the automobiles were ambivalent. The automobile was both masculine and feminine depending on the context. The representations of the automobile were also used to construct the discourse of heteronormativity.

Multidisciplinary practice vs. inter-firm collaboration in professional services market

Yritysten välinen yhteistyö kasvaa asiantuntijamarkkinoilla. Suppean palvelutarjooman omaavat yritykset muodostavat laajempia palveluita yhdistämällä osaamisiaan kumppaneidensa kanssa. Näin muodostuvat yritysryhmittymät uhkaavat alaa hallitsevia monipuolisen palvelutarjooman omaavia kansainvälisiä moniosaajayrityksiä. Tämän diplomityön tavoitteena on selvittää minkälaisia hyötyjä moniosaajayritys voi saada näitä ryhmittymiä vastaan lisäämällä omaa yhteistyötään. Tavoitteeseen pääsemiseksi markkinoilla olevat yritysryhmittymät tunnistetaan ja selvitetään minkälaisia asioita asiakas pitää tärkeänä ostaessaan asiantuntijapalveluita. Toimialan trendit ja aikaisemmat tutkimukset yritysten välisestä yhteistyöstä sekä asiakkaan ostokäyttäytymisestä osoittavat, että yhteistyön avulla yrityksellä on mahdollisuus saavuttaa monia hyötyjä. Tietoa olemassa olevista yritysryhmittymistä ja asiakkaiden ostokäyttäytymisestä kerättiin haastattelemalla yhden kansainvälisen moniosaajayrityksen henkilöstöä sekä asiakkaita. Tuloksena löytyi yritysryhmittymiä, joista osa uhkaa moniosaajayrityksen kilpailuetua. Asiakkaiden ostokäyttäyminen suosi hieman enemmän asiantuntijapalveluiden hankkimista yritysryhmittymältä moniosaajayrityksen sijaan. Tekemällä yhteistyötä ja tarjoamalla tiettyjä palveluita yhdessä kumppanin kanssa, moniosaajayritys voi saavuttaa hyötyjä yritysryhmittymiä vastaan ja vaikuttaa positiivisesti asiakkaan ostokäyttäytymiseen.

Creating Brand Awareness for a B2B Professional Services Subsidiary

Tutkielman tavoitteet: Tutkielman tavoitteena oli selvittää miten branditunnettuutta voidaan kasvattaa yritysasiantuntijapalveluiden markkinoilla toimivassa tytäryhtiössä yleensä, ja erityisesti case yrityksessä. Vaikka yritysasiantuntijapalvelualan markkinointia on tutkittu melko paljon, ovat tutkimukset keskittyneet pääasiallisesti henkilökohtaiseen myyntityöhön ja suhdemarkkinointiin. Myös branditunnettuuden kehittämistä on tutkittu, mutta enimmäkseen kuluttajamarkkinoilla. Tutkimusmetodologiat: Tutkimus on toteutettu kvalitatiivisena deskriptiivis-analyyttisenä case-tutkimuksena. Tutkimuksen teoriaosuus perustuu kirjallisuuskatsaukseen ja empiirinen tutkimus puolistrukturoituun teemahaastatteluun.. Haastateltaviksi valittiin tutkittavan case organisaation ylin johto, sekä viestinnästä ja markkinoinnista vastaava henkilö. Tutkimustulokset ja päätelmät: Tutkimuksen tuloksena syntyi ehdotus siitä, millä tavoin case-yritys voisi kasvattaa branditunnettuuttaan potentiaalisten asiakkaidensa keskuudessa. Ehdotus etenee teoriarakenteen mukaisesti muodostaen mallin jossa kaikki viestintäprosessin oleelliset vaiheet on käyty läpi. Branditunnettuus rakennetaan viestintäprosessissa johon kuuluu: kohdeyleisönidentifiointi, viestinnän tavoitteiden asettaminen, viestin suunnittelu, viestintäkanavien valinta ja toimenpiteiden suunnittelu.

Market Potential and Demand Drivers for a Special Laminating Paper: Implementation of Market Research

Tutkimuksen tavoitteena oli selvittää raaka-aineena käytettävän paloa hidastavan laminaattipaperin markkinapotentiaali sekä kysyntä Euroopassa. Näiden kehitystä arvioitiin analysoimalla kysyntään vaikuttavia tekijöitä. Tutkimusmetodologiassa yhdistyivät useat lähestymistavat, pääasiassa käytettiin kuvailevaa ja ennustavaa tutkimusotetta. Tutkimus perustui sekä primaari että sekundaaritietoon. Primaaritietoa hankittiin tuotteen käyttäjiltä, myyntiedustajilta sekä haastattelemalla tuottajayrityksen henkilökuntaa. Sekundaaritietoa kerättiin myös, mutta tutkimuksen tavoitteisiin liittyviä lähteitä ei ollut runsaasti saatavilla. Tästä syystä primaaritiedolla oli tutkimuksessa hieman tärkeämpi rooli kuin sekundaaritiedolla, mikä on yleistä teollisessa markkinatutkimuksessa. Tuotteen tulevaisuuden näkymät vaikuttavat melko hyviltä. Teoreettinen markkinapotentiaali on suuri verrattuna nykyiseen myyntimäärään, myyntimäärän kasvattaminen vaatii kuitenkin tiettyjä toimenpiteitä. Tulevaisuudessa huomiota tulisi kiinnittää tuotekuvaan, hinnoitteluun ja laadun kokonaisvaltaiseen maksimointiin. Tutkimuksessa havaittiin suuntauksia kysynnän kasvusta tulevien parin vuoden aikana. Myös teoreettinen markkinapotentiaali voisi kasvaa, koska paloa hidastavien laminaattien kysyntä vaikuttaa kasvavan Euroopassa erityisesti rakennusalalla.

Service Concept Development - An Appoach for Professional Service Firm

Specific demand for service concept creation has come about from industrial organizations’ desire to find new and innovative ways to differentiate their offering by increasing the level of customer services. Providers of professional services have also demanded new concepts and approaches for their businesses as these industries have become increasingly competitive. Firms are now seeking better ways to understand and segment their customers, to ensure the delivery of quality services and strengthen their position in aggressively competitive markets. This thesis is intended to provide management consulting companies with a new work method that enables service concept creation in a business-to-business environment. The model defines the service concept as a combination of delivered value and the target customers; the third-dimension operating model is brought to the new system in testing of the service concept creation guidelines in the target organization. For testing, service concepts for a management consulting company are created. Service concepts are designed to serve as a solid foundation for further service improvements. Recommendations and proposals for further action related to service development in the target organization are presented, and recommendations to further improve the model created are given.

Drivers and Barriers of Collaboration in the Value Chain of Paperboard-Packed Consumer Goods

Value chain collaboration has been a prevailing topic for research, and there is a constantly growing interest in developing collaborative models for improved efficiency in logistics. One area of collaboration is demand information management, which enables improved visibility and decrease of inventories in the value chain. Outsourcing of non-core competencies has changed the nature of collaboration from intra-enterprise to cross-enterprise activity, and this together with increasing competition in the globalizing markets have created a need for methods and tools for collaborative work. The retailer part in the value chain of consumer packaged goods (CPG) has been studied relatively widely, proven models have been defined, and there exist several best practice collaboration cases. The information and communications technology has developed rapidly, offering efficient solutions and applications to exchange information between value chain partners. However, the majority of CPG industry still works with traditional business models and practices. This concerns especially companies operating in the upstream of the CPG value chain. Demand information for consumer packaged goods originates at retailers' counters, based on consumers' buying decisions. As this information does not get transferred along the value chain towards the upstream parties, each player needs to optimize their part, causing safety margins for inventories and speculation in purchasing decisions. The safety margins increase with each player, resulting in a phenomenon known as the bullwhip effect. The further the company is from the original demand information source, the more distorted the information is. This thesis concentrates on the upstream parts of the value chain of consumer packaged goods, and more precisely the packaging value chain. Packaging is becoming a part of the product with informative and interactive features, and therefore is not just a cost item needed to protect the product. The upstream part of the CPG value chain is distinctive, as the product changes after each involved party, and therefore the original demand information from the retailers cannot be utilized as such – even if it were transferred seamlessly. The objective of this thesis is to examine the main drivers for collaboration, and barriers causing the moderate adaptation level of collaborative models. Another objective is to define a collaborative demand information management model and test it in a pilot business situation in order to see if the barriers can be eliminated. The empirical part of this thesis contains three parts, all related to the research objective, but involving different target groups, viewpoints and research approaches. The study shows evidence that the main barriers for collaboration are very similar to the barriers in the lower part of the same value chain; lack of trust, lack of business case and lack of senior management commitment. Eliminating one of them – the lack of business case – is not enough to eliminate the two other barriers, as the operational model in this thesis shows. The uncertainty of the future, fear of losing an independent position in purchasing decision making and lack of commitment remain strong enough barriers to prevent the implementation of the proposed collaborative business model. The study proposes a new way of defining the value chain processes: it divides the contracting and planning process into two processes, one managing the commercial parts and the other managing the quantity and specification related issues. This model can reduce the resistance to collaboration, as the commercial part of the contracting process would remain the same as in the traditional model. The quantity/specification-related issues would be managed by the parties with the best capabilities and resources, as well as access to the original demand information. The parties in between would be involved in the planning process as well, as their impact for the next party upstream is significant. The study also highlights the future challenges for companies operating in the CPG value chain. The markets are becoming global, with toughening competition. Also, the technology development will most likely continue with a speed exceeding the adaptation capabilities of the industry. Value chains are also becoming increasingly dynamic, which means shorter and more agile business relationships, and at the same time the predictability of consumer demand is getting more difficult due to shorter product life cycles and trends. These changes will certainly have an effect on companies' operational models, but it is very difficult to estimate when and how the proven methods will gain wide enough adaptation to become standards.

Change of Electricity Distribution Industry: Drivers and Opening Business Opportunities

As a result of the recent regulatory amendments and other development trends in the electricity distribution business, the sector is currently witnessing radical restructuring that will eventually impact the business logics of the sector. This report represents upcoming changes in the electricity distribution industry and concentrates on the factors that are expected to be the most fundamental ones. Electricity network companies nowadays struggle with legislative and regulatory requirements that focus on both the operational efficiency and the reliability of electricity distribution networks. The forces that have an impact on the distribution network companies can be put into three main categories that define the transformation at a general level. Those are: (1) a requirement for a more functional marketplace for energy, (2) environmental aspects (combating climate change etc.), and (3) a strongly emphasized requirement for the security of energy supply. The first point arises from the legislators’ attempt to increase competition in electricity retail markets, the second one concerns both environmental protection and human safety issues, and the third one indicates societies’ reduced willingness to accept interruptions in electricity supply. In the future, regulation of electricity distribution business may lower the threshold for building more weather-resistant networks, which in turn means increased underground cabling. This development pattern is reinforced by tightening safety and environmental regulations that ultimately make the overhead lines expensive to build and maintain. The changes will require new approaches particularly in network planning, construction, and maintenance. The concept for planning, constructing, and maintaining cable networks is necessary because the interdependencies between network operations are strong, in other words, the nature of the operation requires a linkage to other operations.

Virtual Professional Network as a Value Creator in the Dental Business

The research of virtual professional networks has been enormous but the lack of research in the dental field was obvious. This study focuses on those uses and gratifications, and motives of participants that a virtual pro-fessional network should fulfil. The aim of this study is to understand the factors behind the successful virtual professional network, and motives of participants that support a particular business network’s building up for contributing its further success. In this study the focus is on particular mo-tives, needs and benefits of participants that are significant for the net-work’s further development. The study will explore relevant scientific research and theory that is char-acteristic in networking, and theories of user’s needs and motives. Empiri-cal data was collected from dental professionals by net based question-naire that was sent by e-mail. Data analysis was done by quantitative fac-tor analysis. The findings of this study were obvious that virtual knowledge of implantology is inadequate and knowledge is rather difficult to find in the Internet. Sharing of virtual knowledge, net-learning and communication were seen to improve the quality of impolantological professionalism and also the development of these areas was experienced essential. On the grounds of this study a host of a virtual professional network can focus on those aspects that serve the users at best, can develop professionalism in implantology and can profit in its own business operations.

Conditions for EFL learning and professional development : Finland-Swedish learner and teacher perspectives

Engelskans dominerande roll som internationellt språk och andra globaliseringstrender påverkar också Svenskfinland. Dessa trender påverkar i sin tur förutsättningarna för lärande och undervisning i engelska som främmande språk, det vill säga undervisningsmålen, de förväntade elev- och lärarroller, materialens ändamålsenlighet, lärares och elevers initiala erfarenheter av engelska och engelskspråkiga länder. Denna studie undersöker förutsättningarna för lärande och professionell utveckling i det svenskspråkiga nybörjarklassrummet i engelska som främmande språk. Utgångsläget för 351 nybörjare i engelska som främmande språk och 19 av deras lärare beskrivs och analyseras. Resultaten tyder på att engelska håller på att bli ett andraspråk snarare än ett traditionellt främmande språk för många unga elever. Dessa elever har också goda förutsättningar att lära sig engelska utanför skolan. Sådan var dock inte situationen för alla elever, vilket tyder på att det finns en anmärkningsvärd heterogenitet och även regional variation i det finlandssvenska klassrummet i engelska som främmande språk. Lärarresultaten tyder på att vissa lärare har klarat av att på ett konstruktivt sätt att tackla de förutsättningar de möter. Andra lärare uttrycker frustration över sin arbetssituation, läroplanen, undervisningsmaterialen och andra aktörer som kommer är av betydelse för skolmiljön. Studien påvisar att förutsättningarna för lärande och undervisning i engelska som främmande språk varierar i Svenskfinland. För att stöda elevers och lärares utveckling föreslås att dialogen mellan aktörer på olika nivå i samhället bör förbättras och systematiseras.

Generic and professional caring in a Chinese setting: an ethnopraphic study

The objective of the present study is to describe the cultural care practices, meanings, values and beliefs which form the basis of caring in a Chinese context. The research has its starting point in a caring science perspective and a qualitative research approach with interpretative ethnography as methodological guideline. The theoretical perspective is formed by elements of the theory of caritative caring, developed by Eriksson, and the theory of Culture Care Diversity and Universality, developed by Leininger. Previous research of suffering, culture and caring is described and also a presentation of actual transcultural nursing research as well as a presentation of the social structure dimensions of Chinese culture is included in the theoretical background. The empirical part includes patients and relatives, nurses and Hu Gongs as informants. The data collected are analysed based on Geertz’s idea of forming “thick descriptions” through examining the “what, how and why” of people’s actions. The findings show that the family has a prominent position in Chinese caring practices. The patient plays an unobtrusive role and a mutual dependence between the patient and the family members is evident. The professional nursing care is an extended act which includes the family in the caring relationship. The care practices of the Chinese nurse are characterized by great professional nursing skills. Suffering is described by the informants as being caused by disease, pain and social circumstances. “Social suffering” is described as worse than physical or mental suffering. Culturally competent and congruent care is a prerequisite for avoiding cultural pain, imposition and blindness when caring for the suffering human being. The findings of the present study necessitate a broadening in caring theory to include the family in the caring relationship. A further conclusion is that a broadening in our perception and understanding of culture would promote the delivery of culturally competent and congruent care. Suffering need to be seen as enclosed in cultural patterns of how it is expressed, interpreted, understood and relieved. Care and caring need to be seen as embedded in culture and the care practices values and beliefs have to be congruent with the cultural patterns where the care is provided.

Customer relationship management through life cycle analysis, case professional service firm in B2B market

The objective of this master’s thesis was to study how customer relationships should be assessed and categorized in order to support customer relationship management (CRM) in the context of business-to-business (B2B) and professional services. This sophisticated and complex market is utilizing possibilities of CRM only rarely and even then the focus is often on technology. The theoretical part considered first CRM from the value chain point of view and then discussed the cyclical nature of relationships. The case study focused on B2B professional service firm. The data was collected from company databases and included the sample of 90 customers. The research was conducted in three phases first studying the age, then the service type of relationships and finally executing the cluster analysis. The data was analysed by statistical analysis program SAS Enterprise Guide. The results indicate that there are great differences between developments of customer relationships. While some relationships are dynamically growing and changing, most of customers are remaining constant. This implies expectations and requirements of customers are similarly divergent and relationships should be managed accordingly.

Delay reduction in courts of justice – possibilities and challenges of process improvement in professional public organizations

Delays in the justice system have been undermining the functioning and performance of the court system all over the world for decades. Despite the widespread concern about delays, the solutions have not kept up with the growth of the problem. The delay problem existing in the justice courts processes is a good example of the growing need and pressure in professional public organizations to start improving their business process performance.This study analyses the possibilities and challenges of process improvement in professional public organizations. The study is based on experiences gained in two longitudinal action research improvement projects conducted in two separate Finnish law instances; in the Helsinki Court of Appeal and in the Insurance Court. The thesis has two objectives. First objective is to study what kinds of factors in court system operations cause delays and unmanageable backlogs and how to reduce and prevent delays. Based on the lessons learned from the case projects the objective is to give new insights on the critical factors of process improvement conducted in professional public organizations. Four main areas and factors behind the delay problem is identified: 1) goal setting and performance measurement practices, 2) the process control system, 3) production and capacity planning procedures, and 4) process roles and responsibilities. The appropriate improvement solutions include tools to enhance project planning and scheduling and monitoring the agreed time-frames for different phases of the handling process and pending inventory. The study introduces the identified critical factors in different phases of process improvement work carried out in professional public organizations, the ways the critical factors can be incorporated to the different stages of the projects, and discusses the role of external facilitator in assisting process improvement work and in enhancing ownership towards the solutions and improvement. The study highlights the need to concentrate on the critical factors aiming to get the employees to challenge their existing ways of conducting work, analyze their own processes, and create procedures for diffusing the process improvement culture instead of merely concentrating of finding tools, techniques, and solutions appropriate for applications from the manufacturing sector

Customer satisfaction data utilization: identifying value drivers and information use practices

The objective of this master’s thesis was twofold: first to examine the concept of customer value and its drivers and second to identify information use practices. The first part of the study represents explorative research that was carried out by examining a case company’s customer satisfaction data that was used to identify sales and technical customer service related value drivers on a detailed attribute level. This was followed by an examination of whether these attributes had been commented on in a positive or a negative light and what were the reasons why the case company had received higher or lower ratings than its competitor. As a result a classification of different sales and technical customer service related attributes was created. The results indicated that the case company has performed well, but that the results varied on the company’s business segment level. The case company’s staff, service and the benefits from a long-lasting relationship came up in a positive light whereas attitude, flexibility and reaction time came up in a negative light. The reasons for a higher or lower score in comparison to competitor varied. The results indicated that a customer’s satisfaction with the company’s performance did not always mean that the company was outperforming the competition. The second part of the study focused on customer satisfaction information use from the viewpoints of information access, dissemination and reaction. The study was conducted by running an internal survey among the case company’s staff. The results showed that information use practices varied across the company and some units or teams had taken a more proactive approach to the information use than others.