Quality potential of DIP and hardwood CTMP based raw materials in woodcontaining printing paper

The objective of the thesis was to define the quality potential of DIP and hardwood CTMP based raw material furnish for a printing paper production and to define the end product's pulp-based boundary conditions especially when thinking of Chinese markets. Although the Chinese paper industry expands rapidly, the production of some paper grades is still exiguous. Especially the softwood resources are limited in Asia, thus the purpose of the thesis was to find out the possibilities to produce printing paper in China from local raw materials. Bleached CTMP can be produced, for example, from fast-growing hardwood species like eucalyptus and poplar. Therefore in this thesis it was examined if good quality printing paper is possible to produce by using deinked pulp and hardwood CTMP based furnish. In the first section of experimental part, various deinked pulps and chemithermomechanical pulps were compared. The deinked pulps were from China, Central Europe and Finland. Central European was made for magazine papers, and the Chinese as well as the Finnish pulps were made for newsprints. Two of the BCTMPs were from China and those both were made from poplar, whereas one BCTMP was made from eucalyptus in a pilot plant. There were significant differences especially between BCTMPs and their paper properties. In the second section of experimental part, the deinked pulp and eucalyptus BCTMP were blended to produce handsheets. The results show that producing the highest quality printing paper would be difficult from these raw materials. Deinked pulp affected especially the strength and optical properties as well as calender blackening. The BCTMP was found to have effects mostly on the smoothness, strength and optical properties as well as calender blackening.

Potential of energy and nutrient recovery from biodegradable waste by co-treatment in Lithuania

Biodegradable waste quantities in Lithuania and their potential for the co-treatment in renewable energy and organic fertilizer production are investigated. Two scenarios are formulated to study the differences of the amounts of obtainable energy and fertilizers between different ways of utilization. In the first scenario, only digestion is used, and in the second scenario, other materials than straw are digested, and straw and the solid fraction of sewage sludge digestate are combusted. As a result, the amounts of heat and electricity, as well as the fertilizer amounts in the counties are obtained for both scenarios. Based on this study, the share of renewable energy in Lithuania could be doubled by the co-treatment of different biodegradable materials.

Measuring and improving production efficiency of paint filling and packing line

Tutkittu yritys on suomalainen maaleja ja lakkoja kansainvälisesti valmistava ja myyvä toimija. Yrityksessä otettiin vuonna 2010 käyttöön uudet tuotannon ja toimitusketjun tavoitteet ja suunnitelmat ja tämä tutkimus on osa tuota kokonaisvaltaista kehittämissuuntaa. Tutkimuksessa käsitellään tuotannon ja kunnossapidon tehokkuuden parantamis- ja mittaustyökalu OEE:tä ja tuotevaihtoaikojen pienentämiseen tarkoitettua SMED -työkalua. Työn teoriaosuus perustuu lähinnä akateemisiin julkaisuihin, mutta myös haastatteluihin, kirjoihin, internet sivuihin ja yhteen vuosikertomukseen. Empiriaosuudessa OEE:n käyttöönoton ongelmia ja onnistumista tutkittiin toistettavalla käyttäjäkyselyllä. OEE:n potentiaalia ja käyttöönottoa tutkittiin myös tarkastelemalla tuotanto- ja käytettävyysdataa, jota oli kerätty tuotantolinjalta. SMED:iä tutkittiin siihen perustuvan tietokoneohjelman avulla. SMED:iä tutkittiin teoreettisella tasolla, eikä sitä implementoitu vielä käytäntöön. Tutkimustuloksien mukaan OEE ja SMED sopivat hyvin esimerkkiyritykselle ja niissä on paljon potentiaalia. OEE ei ainoastaan paljasta käytettävyyshäviöiden määrää, mutta myös niiden rakenteen. OEE -tulosten avulla yritys voi suunnata rajalliset tuotannon ja kunnossapidon parantamisen resurssit oikeisiin paikkoihin. Työssä käsiteltävä tuotantolinja ei tuottanut mitään 56 % kaikesta suunnitellusta tuotantoajasta huhtikuussa 2016. Linjan pysähdyksistä ajallisesti 44 % johtui vaihto-, aloitus- tai lopetustöistä. Tuloksista voidaan päätellä, että käytettävyyshäviöt ovat vakava ongelma yrityksen tuotannontehokkuudessa ja vaihtotöiden vähentäminen on tärkeä kehityskohde. Vaihtoaikaa voitaisiin vähentää ~15 % yksinkertaisilla ja halvoilla SMED:illä löydetyillä muutoksilla työjärjestyksessä ja työkaluissa. Parannus olisi vielä suurempi kattavimmilla muutoksilla. SMED:in suurin potentiaali ei välttämättä ole vaihtoaikojen lyhentämisessä vaan niiden standardisoinnissa.

Potential of kite aerial photography for peatland investigations with examples from Estonia

Tiivistelmä: Leijailmakuvausmenetelmän käyttömahdollisuudet soiden kartoituksessa - esimerkkejä Viron soilta

Yield potential of chive : effects of cultivar, plastic mulch and fertilisation

Selostus: Lajikkeen, muovikatteen ja lannoituksen vaikutus ruohosipulin satoon

Modelling the Knowledge Interface between Sales and Production Functions of a Company. Case: New Service Development Process.

Yrityksen sisäisten rajapintojen tunteminen mahdollistaa tiedonvaihdon hallinnan läpi organisaation. Idean muokkaaminen kannattavaksi innovaatioksi edellyttää organisaation eri osien läpi kulkevaa saumatonta prosessiketjua sekä tietovirtaa. Tutkielman tavoitteena oli mallintaa organisaation kahden toiminnallisesti erilaisen osan välinen tiedon vaihto. Tiedon vaihto kuvattiin rajapintana, tietoliittymänä. Kolmiulotteinen organisaatiomalli muodosti tutkimuksen pääteorian. Se kytkettiin yrityksen tuotanto- ja myyntiosiin, kuten myös BestServ-projektin kehittämään uuteen palvelujen kehittämisen prosessiin. Uutta palvelujen kehittämisen prosessia laajennettiin ISO/IEC 15288 standardin kuvaamalla prosessimallilla. Yritysarkkitehtuurikehikoita käytettiin mallintamisen perustana. Tietoliittymä nimenä kuvastaa näkemystä siitä, että tieto [tietämys] on olemukseltaan yksilöiden tai ryhmien välistä. Mallinnusmenetelmät eivät kuitenkaan vielä mahdollista tietoon [tietämykseen] liittyvien kaikkien ominaisuuksien mallintamista. Tietoliittymän malli koostuu kolmesta osasta, joista kaksi esitetään graafisessa muodossa ja yksi taulukkona. Mallia voidaan käyttää itsenäisesti tai osana yritysarkkitehtuuria. Teollisessa palveluliiketoiminnassa sekä tietoliittymän mallinnusmenetelmä että sillä luotu malli voivat auttaa konepajateollisuuden yritystä ymmärtämään yrityksen kehittämistarpeet ja -kohteet, kun se haluaa palvelujen tuottamisella suuremman roolin asiakasyrityksen liiketoiminnassa. Tietoliittymän mallia voidaan käyttää apuna organisaation tietovarannon ja tietämyksen mallintamisessa sekä hallinnassa ja näin pyrkiä yhdistämään ne yrityksen strategiaa palvelevaksi kokonaisuudeksi. Tietoliittymän mallinnus tarjoaa tietojohtamisen kauppatieteelliselle tutkimukselle menetelmällisyyden tutkia innovaatioiden hallintaa sekä organisaation uudistumiskykyä. Kumpikin tutkimusalue tarvitsevat tarkempaa tietoa ja mahdollisuuksia hallita tietovirtoja, tiedon vaihtoa sekä organisaation tietovarannon käyttöä.

Market Potential of Service Providers for Niche Vendor

Diplomityössä tarkastellaan palveluoperaattoreiden asemaa Länsi-Euroopan matkapuhelinpalvelumarkkinoilla. Tavoitteena on selvittää, ovatko palveluoperaattorit potentiaalisia asiakkaita tietylle matkapuhelinlisäpalvelujärjestelmien toimittajalle. Lisäksi tavoitteena on rakentaa liiketoimintalaskelmatyökalu, jolla tällaisen järjestelmäinvestoinnin kannattavuus voidaan osoittaa paitsi palveluoperaattorille, myös tämän loppuasiakkaille. Työ aloitetaan matkapuhelinpalvelumarkkinoilla toimivien osapuolten esittelyllä. Eri osapuolten asemaa ja merkitystä matkapuhelinpalvelumarkkinoilla käsitellään. Matkapuhelinpalvelumarkkinoiden kehitystä tarkastellaan uuden teknologian ja erityisesti tulevien palvelujen näkökulmasta. Tarkastelua jatketaan analysoimalla regulaation vaikutusta matkapuhelinpalvelumarkkinoihin. Erityisesti kiinnitetään huomiota regulaation motiiveihin sekä käytännön toteutukseen tietyissä Länsi-Euroopan maissa. Tutkimuksen toteuttamisessa merkittävässä osassa ovat asiantuntijahaastattelut sekä markkina-analyysiraportit.Markkina-analyysissa saatuja tuloksia hyödynnetään liiketoimintalaskelmatyökalun toteutuksessa. Työn tuloksena päädytään myös ratkaisuun palveluoperaattoreiden kiinnostavuudesta asiakassegmenttinä. Tämän lisäksi havaitaan muita potentiaalisia asiakassegmenttejä, joiden tämäntyyppiseen liiketoimintaan soveltuvuutta tutkitaan edelleen.

Market Potential of Northwest Russia for Telemedicine Applications

The level of health care in Russia is mostly still below the western standards, but lately it has been developing quite positively. Many ICT solutions (telemedicine applications) have been developed for health care in Finland, but since the domestic market is so small, it’s necessary to expand to foreign markets to make the Finnish R&D projects more profitable. Telemedicine applications are not yet widely used in Russia, but since the health care system is going through fast changes, leapfrog effects can be expected and new modern applications and technologies will be implemented. This will open numerous business opportunities for Finnish technology developers. This thesis aims to be the first evaluation of the market and form an outlook of the health care system and telemedicine applications already utilized in Russia. The results of this study can be used for focusing further research ultimately aiming at technology implementation. The study showed that there is potential for many types of telemedicine solutions, e.g. electronic patient records and home monitoring systems; providing that further research in this field is needed.

Market Potential of Northwest Russia for Telemedicine Applications

The level of health care in Russia is mostly still below the western standards, but lately it has been developing quite positively. Many ICT solutions (telemedicine applications) have been developed for health care in Finland, but since the domestic market is so small, it’s necessary to expand to foreign markets to make the Finnish R&D projects more profitable. Telemedicine applications are not yet widely used in Russia, but since the health care system is going through fast changes, leapfrog effects can be expected and new modern applications and technologies will be implemented. This will open numerous business opportunities for Finnish technology developers. This thesis aims to be the first evaluation of the market and form an outlook of the health care system and telemedicine applications already utilized in Russia. The results of this study can be used for focusing further research ultimately aiming at technology implementation. The study showed that there is potential for many types of telemedicine solutions, e.g. electronic patient records and home monitoring systems; providing that further research in this field is needed.

Customer consciousness in the production process of a steel factory

The purpose of this thesis is to examine the level of customer consciousness of the production process employees in a steel factory and to investigate the methods of internal marketing in order to propose development practices to enhance the customer consciousness of the case company employees. The significance of the level of customer consciousness is discussed and practices already implemented affecting the level of customer consciousness in the company are examined. The literature review gives an insight to the role of customer consciousness in the CRM philosophy of a manufacturing company and examines the means of internal marketing in enhancing customer consciousness. In the empirical part of the study, the level and significance of customer consciousness is determined by conducting individual and focus group interviews. The interviews are also used to examine the practices that could function in enhancing the customer consciousness of the employees. Development suggestions to improve the level of customer consciousness in the production process are given based on the results. The level of customer consciousness is at a poor level in the production process and influences above all on work motivation and job satisfaction, but possibly on customer satisfaction as well. The enhancement of customer consciousness in the production process should be done e.g. by ensuring the distribution of right knowledge coherently to all of the employees, gathering large customer reference database to exploit in work and in training, using visual illustration in presenting the customer information, training proactively and letting the employees to participate in the customer oriented development activities. Customer satisfaction focused reward system can be considered.

Potential of the Osteoclast’s Proton Pump as a Drug Target in Osteoporosis

Decreasing bone mass during aging predisposes to fractures and it is estimated that every second woman and one in five men will suffer osteoporotic fractures during their lifetime. Bone is an adaptive tissue undergoing continuous remodeling in response to physical and metabolic stimuli. Bone mass decreases through a net negative balance in the bone remodeling process of bone, in which the new bone incompletely replaces the resorbed bone mass. Bone resorption is carried out by the osteoclasts; the bone mineral is solubilized by acidification and the organic matrix is subsequently degraded by proteases. Several classes of drugs are available for prevention of osteoporotic fractures. They act by different mechanisms to increase bone mass, and some of them act mainly as antiresorptives by inhibition of osteoclast formation or their function. Optimally, a drug should act selectively on a specific process, since other processes affected usually result in adverse effects. The purpose of this study was to evaluate whether the osteoclastic vacuolar adenosine trisphosphatases (V-ATPase), which drives the solubilization of bone mineral, can be selectively inhibited despite its ubiquitous cellular functions. The V-ATPase is a multimeric protein composed of 13 subunits of which six possesses two or more isoforms. Selectivity for the osteoclastic V-ATPase could be provided if it has some structural uniqueness, such as a unique isoform combination. The a3 isoform of the 116kDa subunit is inevitable for bone resorption; however, it is also present in, and mainly limited to, the lysosomes of other cells. No evidence of a structural uniqueness of the osteoclastic V-ATPase compared to the lysosomal V-ATPase was found, although this can not yet be excluded. Thus, an inhibitor selective for the a3 isoform would target the lysosomal V-ATPase as well. However, the results suggest that selectivity for bone resorption over lysosomal function can be obtained by two other mechanisms, suggesting that isoform a3 is a valid target. The first is differential compensation; bone resorption depends on the high level of a3 expression, and is not compensated for by other isoforms, while the lower level of a3 in lysosomes of other cells may be partly compensated for. The second mechanism is because the bone resorption process itself is fundamentally different from lysosomal acidification because of the chemistry of bone dissolution and the anatomy of the resorbing osteoclast. By this mechanism, full inhibition of bone resorption is obtained with more than tenfold lower inhibitor concentration than those needed to fully inhibit lysosomal acidification. The two mechanisms are additive. Based on the results, we suggest that bone resorption can be selectively inhibited if VATPase inhibitors that are sufficiently selective for the a3 isoform over the other isoforms are developed.

Exploring the role and transformative potential of human rights in development practice and food security : case study from Malawi

Avhandlingen är en analys av den roll som mänskliga rättigheter spelar i utvecklingssamarbete i allmänhet och tre matsäkerhetsprojekt i Malawi i synnerhet. Författaren undersöker huruvida mänskliga rättigheter kan bidra till samhälleliga förändringsprocesser. Undersökningen har en diskursiv syn på mänskliga rättigheter; rättigheter ses som sociala konstruktioner skapade av människor, konstruktioner som förändras i takt med att aktörerna ger dem ny mening. Människorättsbaserade utvecklingsstrategier riktar uppmärksamheten mot olika aktörers skyldigheter samt vikten av att mänskliga rättigheter inte kränks genom utvecklingspolitiska beslut. En analys som utgår från mänskliga rättigheter kan leda till att nya frågor lyfts fram: vem har skyldigheter, vem har rättigheter, och varför förverkligas inte dessa? Fokus flyttas till hur politiska, ekonomiska och juridiska strukturer kan förändras så att de främjar mänskliga rättigheter. Författaren använder empiriskt material från Malawi för att visa vilken roll mänskliga rättigheter och så kallade människorättsprinciper spelar inom tre projekt: (1) ett mathjälpsprojekt; (2) ett rättighetsbaserat projekt med fokus på att stärka strategier för livsuppehälle; (3) ett juridiskt projekt inom ramen för vilket man skapat ett lagförslag om rätten till föda. Analysen visar att det rättighetsbaserade projektet strävade efter den mest djupgående samhälleliga förändringen. Människorättsprinciperna ansvarighet och deltagande handlade inte endast om verksamheten inom projektet utan man strävade även efter att stärka dessa principer mellan medborgare och myndigheter. Rättigheter, som ett sätt att tala, tänka och handla, inte som abstrakta juridiska normer, påverkade de lokala aktörernas sätt att kräva bl.a. tjänster av lokala myndigheter. Teoretiskt kan man säga att det rättighetsbaserade projektet representerar ett aktörsperspektiv på mänskliga rättigheter där aktörernas egna uppfattningar om vad de är berättigade till samt krav på myndigheters ansvar formade vilken mening rättigheterna kom att få.

Education export as a form of knowledge transfer : The potential of Finnish education export in Chile

Knowledge transfer is a complex process. Knowledge transfer in the form of exporting education products from one system of education to another is particularly complicated, because each system has been developed in a particular context to meet the requirements seen as relevant at each time. National innovation systems are often seen to form an essential framework within which the development of a country, its economy and level of knowledge are considered and promoted. These systems are orientated towards the future, and as such they also provide a framework for the knowledge transfer related to the development of education. In the best of circumstances they are able to facilitate and boost this transfer both from the viewpoint of the provider and the recipient. The leading thought and the idea of the study is that education export is a form of knowledge transfer, which is illustrated by the existing models included. The purpose of this study is to explore, analyze and describe the factors and phenomena related to education export, and more specifically, those related to the experiences and potential of Finnish education export to Chile. For better understanding, of the multiplicity of the issue involved, the current status of education export between Finland and Chile and he existing efforts within the Finnish innovation network will be outlined as well as new forms of co-operation between Finland and Chile in educational matters explored. Several countries have started to commercialize their education system in order to establish themselves as emerging education exporters. Moreover, the demand for education reform is accurate in many developing countries. This offers a good match between Finland and Chile to be the example countries of the research. The main research findings suggest that there are several business areas in education export. These include degrees in education, training services and education technologies for example The factors that influence education export can be divided into four groups, including academic, cultural, political and economic aspects. Challenges to overcome include the lack of product or services to be sold, lack of market and cultural knowledge of the buyer country, financing and lack of suitable pricing model. National innovation systems could be seen as enabling entities for successful education export. The extensive networks that national innovation systems aim to form, could operate as a basis for joining the forces in selling knowledge as well as receiving knowledge in a constructive way.

The potential of social networking sites in inpatriate adjustment

People make up one of the most important resources for a corporation and therefore it has to continuously seek an ever more diverse and international workforce. Inpatriation is another way of utilizing foreign expertise in a corporation. An inpatriate refers to a person that is on an international assignment at the headquarters of a corporation, where they have been sent either from a subsidiary abroad or from a third country outside the corporation. Strengthening the social network of the inpatriate and their family contributes to the adjustment process and furthermore the success of the work assignment. As social networking sites are currently the fastest developing personal networking tools in the world, it is interesting to see how they can help in inpatriate adjustment. The objective of this thesis is to explore the potential of social networking sites (SNS) in inpatriate adjustment. The main objective can be divided into three sub objectives: 1. What is SNS used for during the inpatriate assignment? 2. What are the inpatriates’ motivations to use SNS? 3. Could the three facets of adjustment (work, interaction and general) be gained through SNS? This qualitative study utilizes the theme interview data collection method and the thematic analysis approach for analysing the interview data. From the interviews with five Indian inpatriates in Finland the most mentioned uses of SNS were related to participating (sharing opinions, recommendations and discussing things and connecting to friends, family and colleagues) and consuming (collecting information for work and free time), the least mentioned use of SNS was producing (posting videos, photos and updates). An interesting finding was that the five interviewees did not use SNS for purely entertainment motives at all during their assignment. This thesis found that all three facets of adjustment could potentially be gained through SNS.