Violations of children's rights in armed conflicts : international treaties, observations by peacekeepers and crisis management training in Finland

Ninety-nine Finnish peacekeepers, who had been serving in 15 different operations around the world, participated in the study (8 women, 27-52 years old, m = 37.4, SD = 8.9; and 91 men, 21-69 years old, m = 41.4, SD = 10.2). Three military crisis management trainers from the Finnish Defence Forces International Centre also participated in the study. The data was collected with two webbased questionnaires. In addition two interviews were made with specialists of civilian crisis management in Finland. The study also provides an overview of international treaties concerning children’s rights in armed conflict. The results show that 48.7 % of dangers for children in conflicts reported by the peacekeepers were related to physical injury (e.g. landmines and traffic), and 27.4 % were related to social problems (e.g. poverty, child soldiers, and trafficking). 24.1 % of the peacekeepers had made observations of children’s rights violations either often or very often during peacekeeping operations. 49.6 % of the observations were related to social problems (e.g. child labour or being forced to beg), and 33.0 % were related to physical injury (e.g. assault). Frequency of observation of children’s rights violations was not associated with either sex or military degree of the peacekeepers; instead it was significantly correlated with the peacekeepers’ degree of knowledge of EU’s child protection guidelines. On the basis of the results, it is recommended that knowledge about children’s rights and protection should be included in the training of Finnish crisis management personnel to a much higher degree than at the present.

Supporting the creation, management, and long-term preservation of social science research data

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Development of a New Welding Product Quality Control and Management System Model for China

The Chinese welding industry is growing every year due to rapid development of the Chinese economy. Increasingly, companies around the world are looking to use Chinese enterprises as their cooperation partners. However, the Chinese welding industry also has its weaknesses, such as relatively low quality and weak management. A modern, advanced welding management system appropriate for local socio-economic conditions is required to enable Chinese enterprises to enhance further their business development. The thesis researches the design and implementation of a new welding quality management system for China. This new system is called ‗welding production quality control management model in China‘ (WQMC). Constructed on the basis of analysis of a survey and in-company interviews, the welding management system comprises the following different elements and perspectives: a ‗Localized congenital existing problem resolution strategies‘ (LCEPRS) database, a ‗human factor designed training system‘ (HFDT) training strategy, the theory of modular design, ISO 3834 requirements, total welding management (TWM), and lean manufacturing (LEAN) theory. The methods used in the research are literature review, questionnaires, interviews, and the author‘s model design experiences and observations, i.e. the approach is primarily qualitative and phenomenological. The thesis describes the design and implementation of a HFDT strategy in Chinese welding companies. Such training is an effective way to increase employees‘ awareness of quality and issues associated with quality assurance. The study identified widely existing problems in the Chinese welding industry and constructed a LCEPRS database that can be used in efforts to mitigate and avoid common problems. The work uses the theory of modular design, TWM and LEAN as tools for the implementation of the WQMC system.

Virtaviivainen LEAN-liiketoiminta

Työn tarkoituksena oli löytää ratkaisu omasta kokemuksesta nousseeseen tarpeeseen, kuinka LEAN-toimintaa tulisi ylläpitää ja organisoida yrityksessä. Samalla halusin ymmärtää, kuinka paljon suomalaisissa yrityksissä LEAN-toiminnasta ja sen johtamisesta tiedetään. Ensiksi kävin lävitse LEAN-teoriaa ja hukkia. Menetelmiä olen käsitellyt lähinnä siitä näkökulmasta, mitä niistä Abloy Oy:ssä voisi parhaiten käyttää yrityksen virtaviivaistamiseen. Työn empiirisessä osassa selvitetään haastattelututkimuksella ongelmakenttään liittyviä kysymyksiä. Merkittäväksi havainnoksi nousi se, että haastateltavat eivät nähneet LEAN-toimintaa erityisen hyvin johdetuksi alueeksi suomalaisissa yrityksissä. Haastatellut olivat sen sijaan melko yksimielisiä siitä, kuinka LEAN-toiminta tulisi organisoida yrityksessä, ja että sen tulisi raportoida korkealle yrityksen hierarkiassa. Tämän työn tulokset auttavat yrityksen LEAN-johtamistyötä. Selkeästi käy ilmi, että LEAN-johtajakoulutusta pitäisi organisoida. Abloy Oy:n johto on tullut tietoiseksi LEAN-toiminnan mahdollisuuksista ja merkityksestä monin tavoin. Ei riitä, että LEAN-työskentelyvain aloitetaan, se täytyy myös organisoida. Yrityksen korkeimman johdon on sitouduttava virtaviivaistamistyöhön. Tässä työssä annetut suositukset organisaation peruspiirteistä voivat edesauttaa yritysjohtoa LEAN-työskentelyn aloittamisessa.

Practical Solutions for Increased Safety in Paper Mill Operations

Tämä diplomityö käsittelee työterveys- ja työturvallisuushallinnan (TTT) sekä ympäristönsuojelun ongelmia ja riskejä, joita tehdasalueen toiminnanharjoittaja kohtaa ulkoistaessaan tehdastoimintojaan ja siirtyessään käyttämään 24 h ulkoisia kunnossapitopalveluja. Teoriaosa selventää ulkoistukseen liittyviä lainmukaisia määräyksiä ja vaatimuksia koskien terveyden, turvallisuuden ja ympäristöongelmien hallintaa sellu-, paperi- ja kartonkitehtaissa Euroopassa, Yhdysvalloissa ja Suomessa. TTT-toiminnan tason sekä ympäristönsuojelun tason mittaamisen ongelmat tuodaan esille. Olemassa olevia kansainvälisiä TTT-johtamisjärjestelmien ja ympäristöjärjestelmien standardeja, riskien hallintatyökaluja ja ohjelmia esitellään lyhyesti. Käytännön osa toteutettiin tapaustutkimuksena, jonka kohteena oli Äänekosken tehdaskombinaatti ja kemianteollisuuden laitos, Noviant CMC Oy. TTT-hallintatoimien ja ympäristönsuojelun ongelmia tutkitaan tehdastoimintoja ulkoistettaessa. Integroidun johtamisjärjestelmän auditointimenettelyt, ulkoistuksen kohdealueet, pk-yrityksien riskien hallinta ja ulkoisten työntekijöiden turvallisuuskoulutus ovat erityisen tarkastelun alla. Käyttäen hyväksi kerättyä TTT- ja ympäristöaineistoa, suunniteltiin malli ja sisältöehdotus uudelle internet-selain tyyppiselle työkalulle TTT- ja ympäristöasioiden hallinnan avuksi. Työkalu on tarkoitettu palvelemaan Noviant CMC Oy:n eri sidosryhmien tarpeita. Diplomityön käytännön osa muodostaa pohjan JP MILLSAFE - pilottiprojektille, joka käynnistettiin internet-selain tyyppisen turvallisuuspalvelusovelluksen kehittämiseksi palvelemaan Äänekosken tehdaskombinaatin eri sidosryhmien tarpeita.

Assessment of purchasing maturity in spare parts supply chain

To describe the change of purchasing moving from administrative to strategic function academics have put forward maturity models which help practitioners to compare their purchasing activities to industry top performers and best practices. However, none of the models aim to distinguish the purchasing maturity from the after-sales point of view, even though after-sales activities are acknowledged as a relevant source of revenue, profit and competitive advantage in most manufacturing firms. The maturity of purchasing and supply management practices have a large impact to the overall performance of the spare parts supply chain and ultimately to the value creation and relationship building for the end customer. The research was done as a case study for a European after-sales organization which is part of a globally operating industrial firm specialized in heavy machinery. The study mapped the current state of the purchasing practices in the case organization and also distinguished the relevant areas for future development. The study was based on the purchasing maturity model developed by Schiele (2007) and investigated also how applicable is the maturity model in the spare parts supply chain context. Data for the assessment was gathered using five expert interviews inside the case organization and other parties involved in the company’s spare parts supply chain. Inventory management dimension was added to the original maturity model in order to better capture the important areas in a spare parts supply chain. The added five questions were deduced from the spare parts management literature and verified as relevant areas by the case organization’s personnel. Results indicate that largest need for development in the case organization are: better collaboration between sourcing and operative procurement functions, use of installed base information in the spare parts management, training plan development for new buyers, assessment of aligned KPI’s between the supply chain parties and better defining the role of after-sales sourcing. The purchasing maturity model used in this research worked well in H&R Leading, Controlling and Inventory Management dimensions. The assessment was more difficult to conduct in the Supplier related processes, Process integration and Organizational structure –dimensions, mainly because the assessment in these sections would for some parts require more company-wide assessment. Results indicate also that the purchasing maturity model developed by Schiele (2007) captures the relevant areas in the spare parts supply as well.

Hazard Risk Management in Large Nordic Companies' Operations in Russia

The objective of this research was to describe how Nordic companies manage hazard risks in their operations in Russia and how the local business environment is considered to affect the hazard risks. Research methods used in this research were literature review and expert interviews. Twelve Nordic industrial companies operating in different fields of industry were interviewed. Large Nordic companies typically guide risk management centralized from the parent company on behalf of the whole company group and the risk management standards and policies are integrated in all subsidiaries. Parent companies typically control hazard risk management in Russia by regular risk management reporting, auditing the Russian sites and by training local managers and employees to risk management work. Many companies have experienced several losses in the first years of operating in Russia before the risk management policies have been implemented in Russian subsidiaries. The companies have learned to take local characteristics better into account by experience and most companies are quite satisfied with their current risk management standards in Russia. The interviews indicate that companies experience especially the poor quality of infrastructure, some features in Russian organizational culture and high level of criminality to increase hazard risks in Russia. However, understanding these features and risks in the business environment makes the management of these risks possible. Risks related to infrastructure can be managed in advance by decreasing dependencies of infrastructure and considering the infrastructure quality already when planning the business operations. Also good local network is often considered critical in order to overcome the complications related to infrastructure. Russian personnel has typically different attitude towards risk management than Nordic personnel and neglecting safety and maintenance and concealing losses is more typical in Russia. By training and guiding the local personnel risk management and safety work and desired ways of actions these risks can be decreased. Criminality risks are often managed to certain extent by investing in security, increasing supervising and paying attention to reliability of the employees and other interest groups of the company.

Logistics Management in China's Development Zones - Finnish Metal Industry Perspective

Alikehittynyt infrastruktuuri, tiukat säädökset ja säädösten tulkitseminen, sekä monimutkaiset verotuskäytännöt ovat aiheuttaneet ongelmia suomalaisille Alikehittynyt infrastruktuuri, tiukat säädökset ja säädösten tulkitseminen, sekä monimutkaiset verotuskäytännöt ovat aiheuttaneet ongelmia suomalaisille yrityksille Kiinassa. Tutkimuksen perusteella yritykset eivät pysty vaikuttamaan infrastruktuurin kehittymiseen tai säädösten implementointiin, mutta ylläpitämällä suhteita ja valitsemalla oikeat partnerit yritykset pystyvät hallitsemaan ongelma-alueitaan. Etenkin ulkomaalaisille yrityksille oikean logistiikkaoperaattorin valinta on tärkeätä ja huomioon ottaen palvelutason, kulttuuritaustan sekä kansainväliset operaatiot on ulkomaalaisten yritysten tehokkaampaa käyttää kansainvälisiä operaattoreita kuin paikallisia toimijoita, jotkaovat usein halvempia, mutta eivät pysty toimimaan kansainvälisellä tasolla. Vientiin keskittyneiden yritysten tulisi sijoittua vapaakauppa-alueille tai vientiin painottuneille teollisuusalueille. Kyseisillä alueilla liiketoiminta mannermaahan on rajoitettu, eivätkä alueet täten sovellu yrityksille, jotka ovat keskittyneet Kiinan markkinoille. Paikallisesti operoivien yritysten tulisi sijoittua normaaleihin teollisuuspuistoihin ja käyttää tullin valvomia varastoja tukemaan kansainvälisiä toimintojaan.Tulisi myös muistaa etteivät kiinalaiset teollisuuspuistot täytä kansainvälisiä kriteerejä, joten säädöksiin on tärkeätä tutustua huolella jamielipiteitä kerätä toisilta yrityksiltä. Kiinassa merkittävimmät logistiikkaongelmat ilmenevät tuonnin ja viennin yhteydessä, jolloin säädökset ja toimintamallit ovat kontrolloidumpia. Etenkin tullaus- ja arvonlisävero ongelmat liittyvät kiinteästi tuonti- ja vientiprosessiin. Tutkimuksen tulokset osoittivat, että tullausprosessi tehostuu yhteistyön ja koulutuksen kautta, mutta arvonlisäverosta aiheutuvien kustannusten minimointi vaatii logistiikkapuistojen käyttöä. Mikäli asiakas haluaa tehdä tullauksen kotiprovinssissaan tai yritys tekee kauppaa ALV -vapautettujen yritysten kanssa, tulisi logistiikkapuistojen käyttöä lisätä. Käytettäessä logistiikkapuistoja yritykset välttävät tuotteiden kuljetukset Hongkongiin jatakaisin säästäen huomattavasti kustannuksissa ja toimitusajoissa. Logistiikkapuistoja on myös mahdollista käyttää ratkaisuna kasvaviin ja viivästyviin ALV palautuksiin. Tutkimuksen tulosten mukaan toimintaympäristö ja vientipainotteinen valmistus ohjaavat 3PL yritysten valintaa ja vaihtoehtoisten logistiikkapalvelujen implementointia. Etabloiduttaessavapaakauppa-alueille vientiin ja tuontiin liittyvät ongelmatekijät vahvistuvat sekä rajoitukset kiinan liiketoimintaan kasvavat, mikä tekee yhteistyönkansainvälisten logistiikkaoperaattoreiden kanssa välttämättömäksi ja kannustaa hyödyntämään logistiikkapuistoja.

Business competence and training needs in Finnish companies operating in the Leningrad Region

Tässä pro gradu -työssä tutkitaan Leningradin alueella, Venäjällä, toimivien suomalaisyritysten liiketoimintaosaamisen koulutustarpeita. Tavoitteena on ollut tutkia, millaisia yritysten koulutustarpeet ovat, sekä lisäksi selvittää yleisemmällä tasolla, miten liiketoimintaosaaminen määritellään. Useat tutkimusta varten haastatellut johtajat pitävät liiketoimintaosaamista erityisesti markkinoilla toimimiseen liittyvänä osaamisena. Myös johtaminen, sekä tuotteet ja teknologia nähdään liiketoimintaosaamisen tärkeinä osina. Yrityksillä on koulutustarpeita seuraavilla alueilla: johtaminen; myynti, markkinat ja asiakkaat; yrityksen sisäinen yhteistyö; kielet, sekä juridiikka ja laskentatoimi. Haastateltavien mukaan markkinoiden nopea kehitys sekä yrityksen kasvu luovat yrityksille koulutustarpeita. Yllättäen myös Venäjän koulutusjärjestelmää itsessään pidetään koulutustarpeiden syynä. Tutkimuksessa mukana olleiden yritysten koulutuskäytännöt ovat keskenään melko erilaisia: koulutusbudjetti, koulutuspäivien määrä ja koulutusorganisaation valintakriteerit vaihtelevatyrityksestä riippuen. Joka tapauksessa yleisin koulutusmuoto näyttää olevan yrityksen sisäinen koulutus. Monet haastateltavat painottavat suuresti uusien työntekijöiden kouluttamista. Selvästikin rekrytointi ja uusien työntekijöiden koulutus vievät suuren osan tutkimusta varten haastateltujen johtajien ajasta. Tärkeä huomio koulutusmarkkinoihin liittyen on se, että lyhyiden, kaikille avoimien koulutusten kohdalla markkinat ovat Pietarissa täynnä. Suurimpana uhkana nähdään alalla vallitseva kouluttajapula.

The development of credit management

The objective of the examination was to create development suggestions to intensify the credit management in the subject enterprise. The target of the theory part was to add understanding concerning the credit management and to define the process of credit management. The target of the empirical part was to get to know the present conditions of the credit management in the subject enterprise as well as to establish the problems in the process. The research methodology is constructive, but there are also characteristics of action research.The target of constructive methodology is to create a solutionmodel for the relevant research problem. The methods used in the empirical part were participating observation, literary material and interviews. Within the results of the research a number of development suggestions for the credit management were presented. It is possible to achieve considerable returns while shortening the chain of cash payments. In the suggestions the importance of cooperation between different functions as well as training were emphasized.

Purchasing and supply management capabilities in Finnish medium-sized enterprises

Purchasing and supply management (PSM) has become increasingly important for companies to survive in current highly competitive market. Increased outsourcing has extended the role of PSM, making external resource management and supplier relationships critical success factors in business. However, the recent research has mainly concentrated on large enterprises. Therefore the PSM issues related to medium-sized enterprises represent a significant research area. The thesis aims to explore the status and role of PSM in Finnish medium-sized firms, understand how strategic companies consider PSM to be, clarify what are the competence requirements for PSM professionals, and increase the understanding of PSM capabilities needed from the points view of individual competence and organisational capabilities. The study uses data that was collected in 2007 from purchasing executives at the director/CEO level representing a sample of 94 Finnish firms. 54 % of the respondent enterprises had a supply strategy. The total supply cost was on average 60 % of firms' turnover. Centralisation of PSM and outsourcing of logistics will increase in Finnish medium-sized enterprises. The findings point out that Finnish medium-sized enterprises had strategical features of PSM. However, Finnish firms have not concentrated on making strategies that relate to PSM. The elements that explain the existence of a supply strategy could be found in this study. It can be concluded from this study that there is an advantageous base for the development of strategic PSM, because nearly all the enterprises were of the opinion that PSM capabilities have an effect on business success. When reviewing the organisational capabilities, the five most important development elements were supplier relationships, both operational and strategic processes, time management, and personnel's competence. Training in internationalisation, strategic management, and communication could help to improve competences of PSM personnel.

Quality management of outsourcing welded structure: case China

For any international companies who wish to enter the Chinese market, quality is base on the fundamental. The companies are coming to realize the importance of quality gradually, thus companies have been put the quality problems on the agenda. The competitiveness of companies comes from quality. Quality is the key to success, and it can decide that the companies can be accepted or eliminated by the market. Due to the obvious benefits, the demand of the method of how to achieve high quality of product keeps growing. During achieving the high quality process, the main troubles come from the impact between Eastern and Western culture. Chinese culture which is different with Western one have lasted as long as five thousand years. Such a culture deeply rooted in the hearts of Chinese people, and effected generation after generation of Chinese people's working style and ways of thinking. This thesis determines how to find a good fit point between Eastern and Western culture. Doing right thing by the right way. The nature of improving quality is improving management level in fact. "How to manage, who should be managed", the thesis explains the basic and best option to achieve those. It describes three-dimension-style management to monitoring the working process. This kind of management style can inspect production process from horizontal and vertical direction. In this management way, it defines effective evaluation system to every subcontractor, and makes the companies to achieve the ultimate goal - satisfy quality. Because of the importance of human factor, the thesis determines the range of training of the inspector and welder due to the current situation of China. The results show that in order to reach reliable training effective evaluation, not only the quality of the human but also the ultimate goal of product quality.

Training system for conceptual design and evaluation for wastewater treatment

Rising population, rapid urbanisation and growing industrialisation have severely stressed water quality and its availability in Malawi. In addition, financial and institutional problems and the expanding agro industry have aggravated this problem. The situation is worsened by depleting water resources and pollution from untreated sewage and industrial effluent. The increasing scarcity of clean water calls for the need for appropriate management of available water resources. There is also demand for a training system for conceptual design and evaluation for wastewater treatment in order to build the capacity for technical service providers and environmental practitioners in the country. It is predicted that Malawi will face a water stress situation by 2025. In the city of Blantyre, this situation is aggravated by the serious pollution threat from the grossly inadequate sewage treatment capacity. This capacity is only 23.5% of the wastewater being generated presently. In addition, limited or non-existent industrial effluent treatment has contributed to the severe water quality degradation. This situation poses a threat to the ecologically fragile and sensitive receiving water courses within the city. This water is used for domestic purposes further downstream. This manuscript outlines the legal and policy framework for wastewater treatment in Malawi. The manuscript also evaluates the existing wastewater treatment systems in Blantyre. This evaluation aims at determining if the effluent levels at the municipal plants conform to existing standards and guidelines and other associated policy and regulatory frameworks. The raw material at all the three municipal plants is sewage. The typical wastewater parameters are Biochemical Oxygen Demand (BOD5), Chemical Oxygen Demand (COD), and Total Suspended Solids (TSS). The treatment target is BOD5, COD, and TSS reduction. Typical wastewater parameters at the wastewater treatment plant at MDW&S textile and garments factory are BOD5 and COD. The treatment target is to reduce BOD5 and COD. The manuscript further evaluates a design approach of the three municipal wastewater treatment plants in the city and the wastewater treatment plant at Mapeto David Whitehead & Sons (MDW&S) textile and garments factory. This evaluation utilises case-based design and case-based reasoning principles in the ED-WAVE tool to determine if there is potential for the tool in Blantyre. The manuscript finally evaluates the technology selection process for appropriate wastewater treatment systems for the city of Blantyre. The criteria for selection of appropriate wastewater treatment systems are discussed. Decision support tools and the decision tree making process for technology selection are also discussed. Based on the treatment targets and design criteria at the eight cases evaluated in this manuscript in reference to similar cases in the ED-WAVE tool, this work confirms the practical use of case-based design and case-based reasoning principles in the ED-WAVE tool in the design and evaluation of wastewater treatment 6 systems in sub-Sahara Africa, using Blantyre, Malawi, as the case study area. After encountering a new situation, already collected decision scenarios (cases) are invoked and modified in order to arrive at a particular design alternative. What is necessary, however, is to appropriately modify the case arrived at through the Case Study Manager in order to come up with a design appropriate to the local situation taking into account technical, socio-economic and environmental aspects. This work provides a training system for conceptual design and evaluation for wastewater treatment.

Absorptive capacity of Multinational Corporation’s parent company

The objective of this paper is to contribute to the literature concerning absorptive capacity by revealing the factors affecting the absorptive capacity of MNC parent company toward subsidiary and most particularly the effects of intra-organizational antecedents. The theoretical framework is build around previous findings on knowledge sharing and absorptive capacity. The empirical part of the study is a qualitative research which includes in-depth interviews and analysis of secondary data based on a single case company. The results showed that organizational structure, internal communication, informal networks, formal networks, internationalization, human resources management, shared language, meetings, trust, participation in decision-making, level of awareness, IT system, level of adaptation to market specifications and job rotation influence parent company’s absorptive capacity. Moreover, related problems to these antecedents have been identified. Additionally, recommendations to solve these problems are formulated. In the end, directions for future research on this topic are given.