Cut-off importance sampling of bole volume

Summary

Katko vai eiku? : Itsekorjauksen aloitustavat ja vuorovaikutustehtävät

E. Summary: Cut-off, the particle eiku and other particles for initiating self-repair, and the interactional functions of self-repair

Designing Digital Filters for Servo Systems

The aim of this work was to select an appropriate digital filter for a servo application and to filter the noise from the measurement devices. Low pass filter attenuates the high frequency noise beyond the specified cut-off frequency. Digital lowpass filters in both IIR and FIR responses were designed and experimentally compared to understand their characteristics from the corresponding step responses of the system. Kaiser Windowing and Equiripple methods were selected for FIR response, whereas Butterworth, Chebyshev, InverseChebyshev and Elliptic methods were designed for IIR case. Limitations in digital filter design for a servo system were analysed. Especially the dynamic influences of each designed filter on the control stabilityof the electrical servo drive were observed. The criterion for the selection ofparameters in designing digital filters for servo systems was studied. Control system dynamics was given significant importance and the use of FIR and IIR responses in different situations were compared to justify the selection of suitableresponse in each case. The software used in the filter design was MatLab/Simulink® and dSPACE's DSP application. A speed controlled Permanent Magnet Linear synchronous Motor was used in the experimental work.

Tuotteen valmistuksen kehittäminen kaizen-projektin avulla

Diplomityön tavoitteena oli laatia Abloy Oy:n ovensuljinyksikölle malli kaizenprojektille sekä toteuttaa yksi tällainen kehitysprojekti. Kaizen on japania ja tarkoittaa suomeksi jatkuvaa parantamista. Kaizen on pienin askelin tapahtuvaa jatkuvaa kehittämistä, joka perustuu vanhan osaamisen tehokkaampaan hyväksikäyttöön. Teoriaosuudessa tutustutaan kirjallisuuden perusteella lean- ja JOT-teorioihin, jotka ovat osa Abloy Oy:n yrityksen strategiaa. Niiden lähestymistapa on hyvin asiakaslähtöinen. Kaizen-projekteilla pystytään kehittämään omaa toimintaa parantaen samalla asiakaspalvelua. Kaizen-projektin tavoitteena oli poistaa mahdollisimman paljon lisäarvoa tuottamattomia toimintoja aukipitolaitteen DC191 valmistuksesta ja saada tuotteen kokonaisläpimenoaikaa lyhyemmäksi. Tavoitteena oli myös lisätilan järjestäminen mahdollisesti tuleville kokoonpanopöydille. Projektin avulla aukipitolaitteen DC191 valmistuksesta poistettiin paljon turhia työvaiheita.Lisäksi selvitettiin ja ratkaistiin valmistuksen pahimmat ongelmat.

Effect of physico-chemical conditions and operating parameters on flux and retention of different components in ultrafiltration and nanofiltration fractionation of sweet whey

Tässä väitöstutkimuksessa tutkittiin fysikaaliskemiallisten olosuhteiden ja toimintaparametrien vaikutusta juustoheran fraktiointiin. Kirjallisuusosassa on käsitelty heran ympäristövaikutusta, heran hyödyntämistä ja heran käsittelyä kalvotekniikalla. Kokeellinen osa on jaettu kahteen osaan, joista ensimmäinen käsittelee ultrasuodatusta ja toinen nanosuodatusta juustoheran fraktioinnissa. Ultrasuodatuskalvon valinta tehtiin perustuen kalvon cut-off lukuun, joka oli määritetty polyetyleeniglykoliliuoksilla olosuhteissa, joissa konsentraatiopolariosaatioei häiritse mittausta. Kriittisen vuon konseptia käytettiin sopivan proteiinikonsentraation löytämiseksi ultrasuodatuskokeisiin, koska heraproteiinit ovat tunnetusti kalvoa likaavia aineita. Ultrasuodatuskokeissa tutkittiin heran eri komponenttien suodattumista kalvon läpi ja siihen vaikuttavia ominaisuuksia. Herapermeaattien peptidifraktiot analysoitiin kokoekskluusiokromatografialla ja MALDI-TOF massaspektrometrillä. Kokeissa käytettävien nanosuodatuskalvojen keskimääräinen huokoskoko analysoitiin neutraaleilla liukoisilla aineilla ja zeta-potentiaalit virtauspotentiaalimittauksilla. Aminohappoja käytettiin malliaineina tutkittaessa huokoskoon ja varauksen merkitystä erotuksessa. Aminohappojen retentioon vaikuttivat pH ja liuoksen ionivahvuus sekä molekyylien väliset vuorovaikutukset. Heran ultrasuodatuksessa tuotettu permeaatti, joka sisälsi pieniä peptidejä, laktoosia ja suoloja, nanosuodatettiin happamassa ja emäksisessä pH:ssa. Emäksisissä oloissa tehdyssä nanosuodatuksessa foulaantumista tapahtui vähemmän ja permeaattivuo oli parempi. Emäksisissä oloissa myös selektiivisyys laktoosin erotuksessa peptideistä oli parempi verrattuna selektiivisyyteen happamissa oloissa.

The Strengths and Difficulties Questionnaire (SDQ-Fin) among Finnish children and adolescents

Objective: The psychometric properties of The Strengths and Difficulties Questionnaire (SDQ-Fin), a Finnish version of a brief screening instrument were studied. Emotional and behavioural problems of 7- to 15-year-olds measured by the SDQ were reported, as well as the occurrence of self-reported eating disturbance symptoms and alcohol use among adolescents. Methods and samples: The cross-sectional school survey included 25 items of the SDQ-Fin, items about eating disturbance, alchol use and child psychiatric help-seeking. The study consists of three community samples: 1. The SDQ-Fin parent (n = 703) and teacher (n = 376) versions of 7 – 12 –year-olds, and self-report versions (n = 528) of 11 – 16 years-olds were obtained, and 2. the parent (n = 81) and self-report versions of 15-16 –year olds (n = 129) were obtained in Laitila and Pyhäranta. 3. The self-report versions of 13 – 16 – year-olds (n = 1458) in Salo and Rovaniemi were obtained. Results: The psychometric properties of the SDQ-Fin were for the most part comparable with the other European SDQ research results. The internal consistency (Cronbach’s alpha = 0.71 in all informants’ reports) and inter-rater reliability (between the pairs of reports r = 0.38 - 0.44) were adequate. The concurrent validity (r = 0.75 between the SDQ and the CBCL total scores; r = 0.71 between the SDQ and the YSR total scores) was sufficient. Factor analysis of the SDQ self-report generally confirmed the postulated structure for girls and boys, except for the conduct problems scale of boys, which was fused with emotional symptoms and with hyperactivity. The response rates, means and cut-off points of the SDQ self-report scores were similar to those found, e.g. in Norway and in Britain. A high level of psychological problems, especially emotional and conduct problems and hyperactivity-inattention, were associated with high level of eating disturbance symptoms and alcohol use. Conclusion: The results showed that the psychometric properties of the SDQ-Fin are adequate and provide additional confirmation of the usefulness of the SDQ-Fin for, e.g. screening, epidemiological research and clinical purposes.

Polymeerien erotus ultrasuodatuksella

Työssä selvitettiin suodatusolosuhteiden vaikutusta neutraalien polymeerien pidättymiseen niiden vesiliuoksia suodatettaessa. Suodatuksissa käytettiin kahta regeneroidusta selluloosasta valmistettua ultrasuodatuskalvoa (Microdyn-Nadir UC 030T ja JSC STC Vladipor C 30V). Malliaineina käytettiin polyetyleeniglykolia ja dekstraania. Kirjallisuusosassa esiteltiin aluksi lyhyesti ultrasuodatus erotusmenetelmänä. Lisäksi käsiteltiin ultrasuodatuskalvojen huokoskoon karakterisointimenetelmiä ja selvitettiin polymeerien erottumiseen ultrasuodatuksen aikana vaikuttavia tekijöitä. Työn kokeellisessa osassa tutkittiin paineen ja virtausnopeuden vaikutusta malliaineiden pidättymiseen ultrasuodatuskalvoilla. Lisäksi pyrittiin löytämään suodatusolosuhteet, joissa toinen aineista läpäisisi suodatuskalvon lähes täydellisesti toisen konsentroituessa syöttöliuokseen. Työssä myös määritettiin tutkimuksissa käytetyille kalvoille katkaisukoko, joka kuvaa kalvon kykyä pidättää moolimassaltaan erikokoisia molekyylejä. Lisäksi kokeellisessa osassa selvitettiin työssä käytettyjen kalvojen tasalaatuisuutta vertailemalla keskenään samanlaisissa suodatusolosuhteissa eri kalvopaloilla tehtyjen suodatusten tuloksia. Työssä saatiin erotettua kaksi lähes samankokoista malliaineeksi valittua neutraalia polymeeriä toisistaan siten, että toinen aine pidättyi kalvolla huomattavasti toista ainetta paremmin. Parhaimpaan erotustulokseen päästiin, kun permeaattivuo kalvon läpi oli noin 400 l/(m2 h). Tällöin suodatuspaine oli noin 2 bar ja virtausnopeus alle 2 m/s. Työn aikana määritettyjen katkaisukokojen havaittiin poikkeavan huomattavasti kalvojen valmistajien ilmoittamista arvoista, mutta olevan kuitenkin samaa suuruusluokkaa kuin muiden tutkimusryhmien vastaaville ultrasuodatuskalvoille esittämät arvot. Työn tulosten perusteella C 30V olisi hieman tasalaatuisempi kalvo kuin UC 030T.

Occlusal and dentofacial characteristics of the deciduous dentition and treatment effects of the eruption guidance appliance in the early mixed dentition

The aim of this investigation was to analyze the dental occlusion in the deciduous dentition, and the effects of orthodontic treatment carried out in the early mixed dentition with the eruption guidance appliance. The deciduous occlusion and craniofacial morphology of 486 children (244 girls and 242 boys) were investigated at the onset of the mixed dentition period (mean age 5.1 years, range 4.0-7.8 years). Treatment in the treatment group and follow-up in the control group were started when the first deciduous incisor was exfoliated (T1) and ended when all permanent incisors and first molars were fully erupted (T2). The mean age of the children was 5.1 years (SD 0.5) at T1 and 8.4 years (SD 0.5) at T2. Treatment was carried out with the eruption guidance appliance. Occlusal changes that took place in 167 children were compared with those of 104 untreated control children. Pre- and post-treatment cephalometric radiographs were taken, and the craniofacial morphology of 115 consecutively treated children was compared with that of 104 control children. The prevalence of malocclusion in the deciduous dentition was 68% or 93% depending on how the cut-off value between the acceptable and non-acceptable occlusal characteristic was defined. The early dentofacial features of children with distal occlusion, large overjet and deepbite differed from those with normal occlusion. However, the skeletal pattern of these three malocclusions showed considerable similarity each being characterized by a retrusive mandible, small maxillo-mandibular difference, convex profile, retrusive lower incisors, and large interincisal angle. In the treatment group, overjet and overbite decreased significantly from T1 to T2. Following treatment, a tooth-to-tooth contact was found in 99% of the treated children but only in 24% of the controls. A Class I molar relationship was observed in 90% of the children in the treatment group, and in 48% in the control group. Good alignment of the incisors was observed in 98% of the treated children, whereas upper crowding was found in 32% and lower crowding in 47% of the controls. A significant difference between the groups was found in the mandibular length, midfacial length and maxillo-mandibular differential. The occlusal correction, brought about by the eruption guidance appliance, was achieved mainly through changes in the dentoalveolar region of the mandible. In addition, the appliance seemed to enhance the growth of the mandible. Treatment in the early mixed dentition using the eruption guidance appliance is an effective method to normalize occlusion and reduce further need of orthodontic treatment. Only few spontaneous corrective changes can be expected without active intervention.

Messiah

r1955, Boston.

Food Safety Testing: Rapid Molecular Methods for Chemical and Biological Hazards

The central goal of food safety policy in the European Union (EU) is to protect consumer health by guaranteeing a high level of food safety throughout the food chain. This goal can in part be achieved by testing foodstuffs for the presence of various chemical and biological hazards. The aim of this study was to facilitate food safety testing by providing rapid and user-friendly methods for the detection of particular food-related hazards. Heterogeneous competitive time-resolved fluoroimmunoassays were developed for the detection of selected veterinary residues, that is coccidiostat residues, in eggs and chicken liver. After a simplified sample preparation procedure, the immunoassays were performed either in manual format with dissociation-enhanced measurement or in automated format with pre-dried assay reagents and surface measurement. Although the assays were primarily designed for screening purposes providing only qualitative results, they could also be used in a quantitative mode. All the developed assays had good performance characteristics enabling reliable screening of samples at concentration levels required by the authorities. A novel polymerase chain reaction (PCR)-based assay system was developed for the detection of Salmonella spp. in food. The sample preparation included a short non-selective pre-enrichment step, after which the target cells were collected with immunomagnetic beads and applied to PCR reaction vessels containing all the reagents required for the assay in dry form. The homogeneous PCR assay was performed with a novel instrument platform, GenomEra^™, and the qualitative assay results were automatically interpreted based on end-point time-resolved fluorescence measurements and cut-off values. The assay was validated using various food matrices spiked with sub-lethally injured Salmonella cells at levels of 1-10 colony forming units (CFU)/25 g of food. The main advantage of the system was the exceptionally short time to result; the entire process starting from the pre-enrichment and ending with the PCR result could be completed in eight hours. In conclusion, molecular methods using state-of-the-art assay techniques were developed for food safety testing. The combination of time-resolved fluorescence detection and ready-to-use reagents enabled sensitive assays easily amenable to automation. Consequently, together with the simplified sample preparation, these methods could prove to be applicable in routine testing.

Bile duct stones, strictures and iatrogenic lesions: studies on early diagnosis and treatment.

Aims: This study was carried out to investigate the role of common liver function tests, and the degree of common bile duct dilatation in the differential diagnosis of extrahepatic cholestasis, as well as the occurrence, diagnosis and treatment of iatrogenic bile duct injuries. In bile duct injuries, special attention was paid to gender and severity distribution and long-term results. Patients and methods: All consecutive patients with diagnosed common bile duct stones or malignant strictures in ERCP between August 2000 and November 2003. Common liver function tests were measured in the morning before ERCP on all of these 212 patients, and their common bile duct diameter was measured from ERCP films. Between January 1995 and April 2002, 3736 laparoscopic cholecystectomies were performed and a total of 32 bile duct injuries were diagnosed. All pre-, per-, and postoperative data were collected retrospectively; and the patients were also interviewed by phone. Results: Plasma bilirubin proved to be the best discriminator between CBD stones and malignant strictures (p≤0.001 compared to other liver function tests and degree of common bile duct dilatation). The same effect was seen in Receiver Operating Characteristics curves (AUC 0.867). With a plasma bilirubin cut-off value of 145 μmol/l, four out of five patients could be classified correctly. The degree of common bile duct dilatation proved to be worthless in differential diagnostics. After laparoscopic cholecystectomy the total risk for bile duct injury was 0.86%, including cystic duct leaks. 86% of severe injuries and 88% of injuries requiring operative treatment were diagnosed in females. All the cystic duct leakages and 87% of the strictures were treated endoscopically. Good long-term results were seen in 84% of the whole study population. Conclusions: Plasma bilirubin is the most effective liver function test in differential diagnosis between CBD stones and malignant strictures. The only value of common bile duct dilatation is its ability to verify the presence of extrahepatic cholestasis. Female gender was associated with higher number of iatrogenic bile duct injuries, and in particular, most of the major complications occur in females. Most of the cystic duct leaks and common bile duct strictures can be treated endoscopically. The long-term results in our institution are at an internationally acceptable level.

Water circulations for effective bleaching of high-brightness mechanical pulps

The amount of water available is usually restricted, which leads to a situation where a complete understanding of the process, including water circulations and the influence of water components, is essential. The main aim of this thesis was to clarify the possibilities for the efficient use of residual peroxide by means of water circulation rearrangements. Rearranging water circulations and the reduction of water usage may cause new problems, such as metal induced peroxide decomposition that needs to be addressed. This thesis introduces theoretical methods of water circulations to combine two variables; effective utilization of residual peroxide and avoiding manganese in the alkaline peroxide bleaching stage. Results are mainly based on laboratory and mill site experiments concerning the utilization of residual peroxide. A simulation model (BALAS) was used to evaluate the manganese contents and residual peroxide doses. It was shown that with optimum recirculation of residual peroxide the brightness can be improved or chemical costs can be decreased. From the scientific perspective, it was also very important to discover that recycled peroxide was more effective pre-bleaching agent compared to fresh peroxide. This can be due to the organic acids i.e. per acetic acid in wash press filtrate that have been formed in alkaline bleaching stage. Even short retention time was adequate and the activation of residual peroxide using sodium hydroxide was not necessary. There are several possibilities for using residual peroxide in practice regarding bleaching. A typical modern mechanical pulping process line consist of defibering, screening, a disc filter, a bleach press, high consistency (HC) peroxide bleaching and a wash press. Furthermore there usually is not a particular medium consistency (MC) pre-bleaching stage that includes additional thickening equipment. The most advisable way to utilize residual peroxide in this kind of process is to recycle the wash press filtrate to the dilution of disc filter pulp (low MC pre-bleaching stage). An arrangement such as this would be beneficial in terms of the reduced convection of manganese to the alkaline bleaching stage. Manganese originates from wood material and will be removed to the water phase already in the early stages of the process. Recycling residual peroxide prior to the disc filter is not recommended because of low consistencies. Regarding water circulations, the novel point of view is that, it would be beneficial to divide water circulations into two sections and the critical location for the division is the disc filter. Both of these two sections have their own priority. Section one before the disc filter: manganese removal. Section two after the disc filter: brightening of pulp. This division can be carried out if the disc filter pulp is diluted only by wash press filtrate before the MC storage tower. The situation is even better if there is an additional press after the disc filter, which will improve the consistency of the pulp. This has a significant effect on the peroxide concentration in the MC pre-bleaching stage. In terms of manganese content, it is essential to avoid the use of disc filter filtrate in the bleach press and wash press showers. An additional cut-off press would also be beneficial for manganese removal. As a combination of higher initial brightness and lower manganese content, the typical brightness increase varies between approximately 0.5 and 1% ISO units after the alkaline peroxide bleaching stage. This improvement does not seem to be remarkable, but as it is generally known, the final brightness unit is the most expensive and difficult to achieve. The estimation of cost savings is not unambiguous. For example in GW/TMP mill case 0.6% ISO units higher final brightness gave 10% savings in the costs of bleaching chemicals. With an hypothetical 200 000 ton annual production, this means that the mill could save in the costs of bleaching chemicals more than 400 000 euros per year. In general, it can be said that there were no differences between the behavior of different types of processes (GW, PGW, TMP and BCTMP). The enhancement of recycling gave a similar response in all cases. However, we have to remember that the utilization of residual peroxide in older mills depends a great deal on the process equipment, the amount of water available and existing pipeline connections. In summary, it can be said that processes are individual and the same solutions cannot be applied to all cases.

Saako historiasta selvää? Monikulttuuriset yläkoululaiset historian lähteillä historian taidot motiivien, seurauksien, historian tulkintojen ja lähteiden luotettavuuden arvioinneissa

The research assesses the skills of upper comprehensive school pupils in history. The focus is on locating personal motives, assessing wider reasons hidden in historical sources and evaluating source reliability. The research also questions how a wide use of multiple sources affects pupils’ holistic understanding of historical phenomena. The participants were a multicultural group of pupils. The origins of their cultures can be traced to the Balkan, the Middle East, Asia and Europe. The number of native Finnish speakers and pupils speaking Finnish as their second language was almost equal. The multicultural composition provides opportunities to assess how culturally responsive learning history from sources is. The intercultural approach to learning in a multicultural setting emphasizes equality as a precondition for learning. In order to set assignments at least to some extent match with all participants only those answers were taken into account which were produced by pupils who had studied history for a similar period of time in the Finnish comprehensive school system. Due to the small number of participants (41), the study avoids wide generalizations. Nevertheless, possible cultural blueprints in pupils’ way of thinking are noted. The first test examined the skills of pupils to find motives for emigration. The results showed that for 7th graders finding reasons is not a problematic task. However, the number of reasons noticed and justifications varied. In addition, the way the pupils explained their choices was a distinguishing factor. Some pupils interpreted source material making use of previous knowledge on the issue, while other pupils based their analysis solely on the text handed and did not try to add their own knowledge. Answers were divided into three categories: historical, explanatory and stating. Historical answers combined smoothly previously learned historical knowledge to one’s own source analysis; explanatory answers often ignored a wider frame, although they were effective when explaining e.g. historical concepts. The stating answers only noticed motives from the sources and made no attempts to explain them historically. Was the first test culturally responsive? All pupils representing different cultures tackled the first source exam successfully, but there were some signs of how historical concepts are understood in a slightly different way if the pupil’s personal history has no linkage to the concepts under scrutiny. The second test focused on the history of Native Americans. The test first required pupils to recognize whether short source extracts (5) were written by Indians or Caucasians. Based on what they had already learned from North American history, the pupils did not find it hard to distinguish between the sources. The analysis of multiphase causes and consequences of the disputes between Native Americans and white Americans caused dispersion among pupils. Using two historical sources and combining historical knowledge from both of them simultaneously was cumbersome for many. The explanations of consequences can be divided into two groups: the ones emphasizing short term consequences and those placing emphasis on long term consequences. The short term approach was mainly followed by boys in every group. The girls mainly paid attention to long term consequences. The result suggests that historical knowledge in sources is at least to some extent read through role and gender lenses. The third test required pupils to explain in their own words how the three sources given differed in their account of living conditions in Nazi Germany, which turned out to be demanding for many pupils. The pupils’ stronghold was rather the assessment of source reliability and accounts why the sources approached the same events differently. All participants wrote critical and justified comments on reliability and aspects that might have affected the content of the sources. The pupils felt that the main reasons that affected source reliability were the authors’ ethnic background, nationality and profession. The assessment showed that pupils were well aware that position in a historical situation has an impact on historical accounts, but in certain cases the victim’s account was seen as a historical truth. The account of events by a historian was chosen most often as the most reliable source, but it was often justified leniently with an indication to professionalism rather than with clear ideas of how historians conduct accounts based on sources. In brief, the last source test demonstrates that pupils have a strong idea that the ethnicity or nationalism determines how people explained events of the past. It is also an implication that pupils understand how historical knowledge is interpretative. The results also imply that history can be analyzed from a neutral perspective. One’s own membership in an ethnical or religious group does not automatically mean that a person’s cultural identity excludes historical explanations if something in them contradicts with his or her identity. The second method of extracting knowledge of pupils’ historical thinking was an essay analysis. The analysis shows that an analytical account of complicated political issues, which often include a great number of complicated political concepts, leads more likely to an inconsistent structure in the written work of pupils. The material also demonstrates that pupils have a strong tendency to take a critical stance when assessing history. Historical empathy in particular is shown if history somehow has a linkage to young people, children or minorities. Some topics can also awake strong feelings, especially among pupils with emigrant background, if there is a linkage between one’s own personal history and that of the school; and occasionally a student’s historical experience or thoughts replaced school history. Using sources during history lessons at school seems to have many advantages. It enhances the reasoning skills of pupils and their skills to assess the nature of historical knowledge. Thus one of the main aims and a great benefit of source work is to encourage pupils to express their own ideas and opinions. To conclude, when assessing the skills of adolescents in history - their work with sources, comments on history, historical knowledge and finally their historical thinking - one should be cautious and avoid cut off score evaluations. One purpose of pursuing history with sources is to encourage pupils to think independently, which is a useful tool for further identity construction. The idea that pupils have the right to conduct their own interpretations of history can be partially understood as part of a wider learning process, justification to study history comes from extrinsic reasons. The intrinsic reason is history itself; in order to understand history one should have a basic understanding of history as a specific domain of knowledge. Using sources does not mean that knowing history is of secondary importance. Only a balance between knowing the contextual history, understanding basic key concepts and working with sources is a solid base to improve pupils’ historical understanding.

Social capital and health : variations, associations and challenges

Although social capital and health have been extensively studied during the last decade, there are still open issues in current empirical research. These concern for instance the measurement of the concept in different contexts, as well as the association between different types of social capital and different dimensions of health. The present thesis addressed these questions. The general aim was to promote the understanding of social capital and health by investigating the oldest old and the two major language groups in Finland, Swedish- and Finnish-speakers. Another aim was to contribute to the discussion on methodological issues in social capital and health research. The present thesis investigated two empirical data sets, Umeå 85+ and Health 2000. The Umeå 85+ study was a cross-sectional study of 163 individuals aged 85, 90, and 95 or older, living in the municipality of Umeå, Sweden, in the year of 2000. The Health 2000 survey was a national study of 8,028 persons aged 30 or above carried out in Finland in 2000-2001. Different indicators of structural (e.g. social contacts) and cognitive (e.g. trust) social capital, as well as health indicators were used as variables in the analyses. The Umeå 85+ data set was analyzed with factor analysis, as well as univariate and multivariate analysis of variance. The Health 2000 data was analyzed with logistic regression techniques. The results showed that the Swedish-speakers in the Finnish data set Health 2000 had consistently higher prevalence of social capital compared to the Finnish-speakers even after controlling for central sociodemographic variables. The results further showed that even if the language group differences in health were small, the Swedishspeakers experienced in general better self-reported health compared with the Finnish-speakers. Common sociodemographic variables could not explain these observed differences in health. The results imply that social capital is often, but not always, associated with health. This was clearly seen in the Umeå 85+ data set where only one health indicator (depressive symptoms) was associated with structural social capital among the oldest old. The results based on the analysis of the Health 2000 survey demonstrated that the cognitive component of social capital was associated with self-rated health and psychological health rather than with participation in social activities and social contacts. In addition, social capital statistically reduced the health advantage especially for Swedish-speaking men, indicating that high prevalence of social capital may promote health. Finally, the present thesis also discussed the issue of methodological challenges faced with when analyzing social capital and health. It was suggested that certain components of social capital such as bonding and bridging social capital may be more relevant than structural and cognitive components when investigating social capital among the two language groups in Finland. The results concerning the oldest old indicated that the structural aspects of social capital probably reflect current living conditions, whereas cognitive social capital reflects attitudes and traits often acquired decades earlier. This is interpreted as an indication of the fact that structural and cognitive social capital are closely related yet empirically two distinctive concepts. Taken together, some components of social capital may be more relevant to study than others depending on which population group and age group is under study. The results also implied that the choice of cut-off point of dichotomization of selfrated health has an impact on the estimated effects of the explanatory variables. When the whole age interval, 35-64 years, was analyzed with logistic regression techniques the choice of cut-off point did not matter for the estimated effects of marital status and educational level. The results changed, however, when the age interval was divided into three shorter intervals. If self-rated health is explored using wide age intervals that do not account for age-dependent covariates there is a risk of drawing misleading conclusions. In conclusion, the results presented in the thesis suggest that the uneven distribution of social capital observed between the two language groups in Finland are of importance when trying to further understand health inequalities that exist between Swedish- and Finnish-speakers in Finland. Although social capital seemed to be relevant to the understanding of health among the oldest old, the meaning of social capital is probably different compared to a less vulnerable age group. This should be noticed in future empirical research. In the present thesis, it was shown that the relationship between social capital and health is complex and multidimensional. Different aspects of social capital seem to be important for different aspects of health. This reduces the possibility to generalize the results and to recommend general policy implementations in this area. An increased methodological awareness regarding social capital as well as health are called for in order to further understand the cfomplex association between them. However, based on the present data and findings social capital is associated with health. To understand individual health one must also consider social aspects of the individuals’ environment such as social capital.

Metsäkoneen kouran ja hakkuupään pikavaihdon kehittäminen

Yhdistelmämetsäkone on metsäkone, jota voidaan käyttää sekä hakkuukoneena että kuormatraktorina. Konetta voidaan käyttää sekä puiden kaatamiseen, karsimiseen ja katkomiseen että puiden kuormaamiseen ja kuljettamiseen. Tässä diplomityössä suunnitellaan uusi kouran ja hakkuupään pikalukitusmekanismi yhdistelmämetsäkoneen kuormaimeen. Suunnittelutyössä edetään vaiheittain järjestelmällisen tuotesuunnittelun periaatteiden mukaisesti. Tärkeimpänä tavoitteena suunnittelutyönsä on nopeuttaa kouran vaihtoa ja helpottaa kuljettajan työtä. Suunnittelutyön alkuvaiheessa etsitään lukitusmekanismille useita eri ratkaisuvaihtoehtoja, joista valitaan paras jatkokehitykseen. Valittua ratkaisuvaihtoehtoa kehitetään simulointia ja elementtimenetelmälaskentaa apuna käyttäen.