Some reformulations for the quadratic assignment problem

Kombinatorisk optimering handlar om att hitta en bra eller rent av den bästa möjliga lösningen från ett känt antal lösningar eller kombinationer. Ofta är antalet lösningar så enormt att en genomgång av alla olika lösningar inte är möjlig. En av huvudorsakerna till att det forskas inom kombinatorisk optimering är att liknande frågeställningar eller problem uppkommer inom så många olika områden. Påståendet stämmer speciellt bra för kvadratiska tilldelningsproblem(eng. Quadratic Assignment Problem). Sådana problem uppstår då man försöker beskriva en stor mängd tillämpade frågeställningar. Vilken gate skall väljas för flygen på större flygplatser för att minimera den totala väg människorna behöver gå och bagaget förflyttas? Var skall olika avdelningar på en fabrik placeras för att minimera materialförflyttningar mellan avdelningarna? Hur ser ett optimalt tangentbord ut för olika språk? Var skall komponenterna placeras på ett kretskort? De här är alla frågor som kan besvaras genom att lösa kvadratiska tilldelningsproblem. Kvadratiska tilldelningsproblem är dock mycket svåra att lösa. Det beror på att problemet i den standardform det matematiskt formuleras i huvudsak består av produkter av binära variabler. I denna avhandling har problemet omformulerats till en linjär diskret form som innehåller färre variabler. Med omformuleringen har bland annat flera tidigare olösta kvadratiska tilldelningsproblem kunnat lösas till globalt optimum, den bästa möjliga lösningen, för första gången någonsin.

Cost Models for Routing and Wavelength Assignment in Wavelength-Division Multiplexing Optical Net

WDM (Wavelength-Division Multiplexing) optiset verkot on tällä hetkellä suosituin tapa isojen määrän tietojen siirtämiseen. Jokaiselle liittymälle määrätään reitin ja aallonpituus joka linkin varten. Tarvittavan reitin ja aallon pituuden löytäminen kutsutaan RWA-ongelmaksi. Tämän työn kuvaa mahdollisia kustannuksen mallein ratkaisuja RWA-ongelmaan. Olemassa on paljon erilaisia optimoinnin tavoitteita. Edellä mainittuja kustannuksen malleja perustuu näillä tavoitteilla. Kustannuksen malleja antavat tehokkaita ratkaisuja ja algoritmeja. The multicommodity malli on käsitelty tässä työssä perusteena RV/A-kustannuksen mallille. Myöskin OB käsitelty heuristisia menetelmiä RWA-ongelman ratkaisuun. Työn loppuosassa käsitellään toteutuksia muutamalle mallille ja erilaisia mahdollisuuksia kustannuksen mallein parantamiseen.

Digital printing delivering value to the value network: CASE: STORA ENSO OYJ

Tutkielman tavoitteena oli tutkia, millaista arvoa digitaalinen painatusmenetelmä tuo yrityksen arvoverkostoon. Teoriaosassa tavoite oli rakentaa digitaalipainatuksen arvoverkostoa tutkien kirjallisuutta liittyen arvoketju- ja arvoverkostoajatteluun. Myös aiemmat tutkimukset ja kirjallisuus liittyen digitaalipainatukseen rakensivat osaltaan teoreettisen viitekehyksen muodostumista. Aiemmat tutkimukset digitaalisen painomenetelmän mahdollisuuksista ovat hyvin tekniikkapainotteisia, siksi tämä tutkimus liittyy enemmän kaupallisiin mahdollisuuksiin. Empiirinen osio tutkimuksesta tehtiin kvalitatiivisena case -tutkimuksena, johon sisältyi yksi alayksikkö. Eli tutkittiin yhtä casea, jossa oli kaksi osapuolta. Tutkielma liittyy kiinteästi Stora Enson ja Valion väliseen digipainatus-projektiin, joka käynnistettiin helmikuussa 2001. Tutkielman teemahaastatteluihin valittiin henkilöt tästä projektiryhmästä. Projektiryhmän mielipiteitä ja havaintoja hyödyntäen pyrittiin löytämään tukea ja eroavaisuuksia teoriaosan muodostamaan viitekehykseen ja informaatioon. Empiirinen osuus tuki teoriaosassa esittämiä väittämiä hyvin, mutta myös muutamia uusia havaintoja esiintyi. Tutkimusongelmaan löydettiin monia vastauksia: digitaalipainatus luo arvoa yrityksen jakeluketjuun vähentämällä varastoja ja nopeuttamalla toimituksia. Jäätelöpakkausten markkinointi on aivan uuden haasteen edessä, koska mahdollisuudet kasvavat digitaalipainatuksen myötä huomattavasti. Kartongin valmistajalle arvo tulee parempien tuotteiden kautta, joista saa myös paremman tuoton. Digitaalipainatuksen arvoverkostossa tulee tapahtumaan muutoksia jatkossa, eri osapuolten roolit saattavat muuttua radikaalisti. Kuka hoitaa painatusta ja miten?

Algorithmic Solutions for Combinatorial Problems in Resource Management of Manufacturing Environments

This thesis studies the use of heuristic algorithms in a number of combinatorial problems that occur in various resource constrained environments. Such problems occur, for example, in manufacturing, where a restricted number of resources (tools, machines, feeder slots) are needed to perform some operations. Many of these problems turn out to be computationally intractable, and heuristic algorithms are used to provide efficient, yet sub-optimal solutions. The main goal of the present study is to build upon existing methods to create new heuristics that provide improved solutions for some of these problems. All of these problems occur in practice, and one of the motivations of our study was the request for improvements from industrial sources. We approach three different resource constrained problems. The first is the tool switching and loading problem, and occurs especially in the assembly of printed circuit boards. This problem has to be solved when an efficient, yet small primary storage is used to access resources (tools) from a less efficient (but unlimited) secondary storage area. We study various forms of the problem and provide improved heuristics for its solution. Second, the nozzle assignment problem is concerned with selecting a suitable set of vacuum nozzles for the arms of a robotic assembly machine. It turns out that this is a specialized formulation of the MINMAX resource allocation formulation of the apportionment problem and it can be solved efficiently and optimally. We construct an exact algorithm specialized for the nozzle selection and provide a proof of its optimality. Third, the problem of feeder assignment and component tape construction occurs when electronic components are inserted and certain component types cause tape movement delays that can significantly impact the efficiency of printed circuit board assembly. Here, careful selection of component slots in the feeder improves the tape movement speed. We provide a formal proof that this problem is of the same complexity as the turnpike problem (a well studied geometric optimization problem), and provide a heuristic algorithm for this problem.

Sähkökäytön valintaperiaatteet ja monimoottorikäytöt malmin laaduntasauksessa

Sähkökäytön valintaan vaikuttavat useat eri tekijät. Sähkökäytön valinnan perusteena voidaan käyttää tietoa prosessin tai toimilaitteen fysikaalisesta käyttäytymisestä. Valinnan perusteena voi olla myös riittävän suorituskyvyn tarve prosessissa. Tässä työssä tutustutaan sähkökäytön valintaan vaikuttaviin tekijöihinja sähkökäytön mitoitukseen. Työssä on keskitytty yleisempien pienjännitemoottorityyppien ja niiden säätöjen käsittelyyn. Useissa prosesseissa vaaditaan monen moottorin käyttöä saman kuorman liikuttamisessa. Monimoottorikäyttöjen ohjauksen tuntemus auttaa ongelmatilanteiden ratkaisussa ja antaa perusteet monimoottorikäytön valinnalle. Tässä työssä käsitellään monimoottorikäyttöjen pyörimisnopeuserojen ja vääntömomenttien epätasaisuuteen liittyviä ongelmia.

Torque vibration model of axial-flux surface-mounted permanent magnet synchronous machine

In order that the radius and thus ununiform structure of the teeth and otherelectrical and magnetic parts of the machine may be taken into consideration the calculation of an axial flux permanent magnet machine is, conventionally, doneby means of 3D FEM-methods. This calculation procedure, however, requires a lotof time and computer recourses. This study proves that also analytical methods can be applied to perform the calculation successfully. The procedure of the analytical calculation can be summarized into following steps: first the magnet is divided into slices, which makes the calculation for each section individually, and then the parts are submitted to calculation of the final results. It is obvious that using this method can save a lot of designing and calculating time. Thecalculation program is designed to model the magnetic and electrical circuits of surface mounted axial flux permanent magnet synchronous machines in such a way, that it takes into account possible magnetic saturation of the iron parts. Theresult of the calculation is the torque of the motor including the vibrations. The motor geometry and the materials and either the torque or pole angle are defined and the motor can be fed with an arbitrary shape and amplitude of three-phase currents. There are no limits for the size and number of the pole pairs nor for many other factors. The calculation steps and the number of different sections of the magnet are selectable, but the calculation time is strongly depending on this. The results are compared to the measurements of real prototypes. The permanent magnet creates part of the flux in the magnetic circuit. The form and amplitude of the flux density in the air-gap depends on the geometry and material of the magnetic circuit, on the length of the air-gap and remanence flux density of the magnet. Slotting is taken into account by using the Carter factor in the slot opening area. The calculation is simple and fast if the shape of the magnetis a square and has no skew in relation to the stator slots. With a more complicated magnet shape the calculation has to be done in several sections. It is clear that according to the increasing number of sections also the result will become more accurate. In a radial flux motor all sections of the magnets create force with a same radius. In the case of an axial flux motor, each radial section creates force with a different radius and the torque is the sum of these. The magnetic circuit of the motor, consisting of the stator iron, rotor iron, air-gap, magnet and the slot, is modelled with a reluctance net, which considers the saturation of the iron. This means, that several iterations, in which the permeability is updated, has to be done in order to get final results. The motor torque is calculated using the instantaneous linkage flux and stator currents. Flux linkage is called the part of the flux that is created by the permanent magnets and the stator currents passing through the coils in stator teeth. The angle between this flux and the phase currents define the torque created by the magnetic circuit. Due to the winding structure of the stator and in order to limit the leakage flux the slot openings of the stator are normally not made of ferromagnetic material even though, in some cases, semimagnetic slot wedges are used. In the slot opening faces the flux enters the iron almost normally (tangentially with respect to the rotor flux) creating tangential forces in the rotor. This phenomenon iscalled cogging. The flux in the slot opening area on the different sides of theopening and in the different slot openings is not equal and so these forces do not compensate each other. In the calculation it is assumed that the flux entering the left side of the opening is the component left from the geometrical centre of the slot. This torque component together with the torque component calculated using the Lorenz force make the total torque of the motor. It is easy to assume that when all the magnet edges, where the derivative component of the magnet flux density is at its highest, enter the slot openings at the same time, this will have as a result a considerable cogging torque. To reduce the cogging torquethe magnet edges can be shaped so that they are not parallel to the stator slots, which is the common way to solve the problem. In doing so, the edge may be spread along the whole slot pitch and thus also the high derivative component willbe spread to occur equally along the rotation. Besides forming the magnets theymay also be placed somewhat asymmetric on the rotor surface. The asymmetric distribution can be made in many different ways. All the magnets may have a different deflection of the symmetrical centre point or they can be for example shiftedin pairs. There are some factors that limit the deflection. The first is that the magnets cannot overlap. The magnet shape and the relative width compared to the pole define the deflection in this case. The other factor is that a shifting of the poles limits the maximum torque of the motor. If the edges of adjacent magnets are very close to each other the leakage flux from one pole to the other increases reducing thus the air-gap magnetization. The asymmetric model needs some assumptions and simplifications in order to limit the size of the model and calculation time. The reluctance net is made for symmetric distribution. If the magnets are distributed asymmetrically the flux in the different pole pairs will not be exactly the same. Therefore, the assumption that the flux flows from the edges of the model to the next pole pairs, in the calculation model from one edgeto the other, is not correct. If it were wished for that this fact should be considered in multi-pole pair machines, this would mean that all the poles, in other words the whole machine, should be modelled in reluctance net. The error resulting from this wrong assumption is, nevertheless, irrelevant.

Analysis of the voltage source inverter with small DC-link capacitor

IIn electric drives, frequency converters are used to generatefor the electric motor the AC voltage with variable frequency and amplitude. When considering the annual sale of drives in values of money and units sold, the use of low-performance drives appears to be in predominant. These drives have tobe very cost effective to manufacture and use, while they are also expected to fulfill the harmonic distortion standards. One of the objectives has also been to extend the lifetime of the frequency converter. In a traditional frequency converter, a relatively large electrolytic DC-link capacitor is used. Electrolytic capacitors are large, heavy and rather expensive components. In many cases, the lifetime of the electrolytic capacitor is the main factor limiting the lifetime of the frequency converter. To overcome the problem, the electrolytic capacitor is replaced with a metallized polypropylene film capacitor (MPPF). The MPPF has improved properties when compared to the electrolytic capacitor. By replacing the electrolytic capacitor with a film capacitor the energy storage of the DC-linkwill be decreased. Thus, the instantaneous power supplied to the motor correlates with the instantaneous power taken from the network. This yields a continuousDC-link current fed by the diode rectifier bridge. As a consequence, the line current harmonics clearly decrease. Because of the decreased energy storage, the DC-link voltage fluctuates. This sets additional conditions to the controllers of the frequency converter to compensate the fluctuation from the supplied motor phase voltages. In this work three-phase and single-phase frequency converters with small DC-link capacitor are analyzed. The evaluation is obtained with simulations and laboratory measurements.

Factors affecting the usability of aspen (Populus tremula) wood dried at different temperature levels

In this dissertation the main aim was to study the usability of aspen wood in the mechanical wood processes, especially the factors that affect the usability of aspen wood, which is dried at different temperature levels. The problematic of varying temperatures from level to another seem to have significant effects on distortions. According to the studies conducted, many practical solutions for drying of aspen timber can be made. European aspen sawn timber should be dried in relatively narrow widths, short lengths, edged and sawn pith free. The results achieved give an interesting view for the distortions of aspen wood between HT drying and heat treatment. The most significant result is that cupping seems to decrease when increasing temperature level from HT drying to heat treatment phase. The difference is significant. Other very obvious result is that bow and crook are increasing between these two temperature levels, bow significantly. Also the modelling gives a good background for this result since cupping is reduced by higher temperatures. It can also be assumed that these distortions can be affected for example by sorting out the timber used to different moisture levels before drying. This could be a very simple solution for practical purposes. From practical point of view, it was also noted during the drying tests performed that the discoloration seem to be no problem for aspen boards dried in temperatures under 150 °C. Altogether, this dissertation covers many interesting points of view of factors affecting distortions of wood in different temperature stages. Aspen as species in use of mechanical wood industries seems to be a species suitable for component production. According to the results, the best yield from aspen timber can be achieved in industry that can utilize relatively short components of sawn wood. Results achieved give a significant indication about the factors affecting distortions of wood at different temperature stages of drying, especially considering European aspen.

Sairaanhoitajaopiskelijoiden ohjattujen käytännön harjoittelujen aikana ilmenneet eettiset ongelmat

Ethical problems occurring during the practical training period of Finnish nursing students The present study focused on nursing students adopting the professional code of conduct during their supervised practical training. The study was carried out in two phases. During the first phase, the objective was to survey ethical problems occurring in practical training as well as how these problems are detected and resolved by nursing students and their supervisors at different stages of their studies. In the second phase, the capability of the nursing students about to graduate to detect and resolve ethical problems was described and analyzed. The students’ capacity for self-instruction, independent search for information as well as factors related to teaching of ethics were determined within this phase. Further, an extensive literature review was carried out to complement the study. Thus, the main objective of the thesis was to make suggestions for the development of the teaching of ethics and supervision in nursing studies and in practice. In the first part of the empirical phase (2002–2005), the views of the nursing students (n =18) were clarified with themed open essay questions. Furthermore, the views of the supervising nurses (n = 115) were established by utilizing a series of themed questions and group interviews. During the second phase (2006–2007), the data for the analyses were collected from nursing students in their graduating stage (n = 319) by a national Internet-based questionnaire. The results of the first phase were examined with contentanalysis and those of the second phase both statistically and by using content analysis. Ethical problems occurring during supervised practical training were typically connected to a patient or a client, a member of the nursing staff or to a student, while solutions were connected to preparation and the action to solve the problem in question. Ethical dilemmas were classified as legal, ethical comportment and uncertainty problems as well as personal and institutional ones. The solutions for these problems were further grouped as based on facts, instructor/staff/member/specialist or patient/client/relative. The results showed that although the nursing students about to graduate had detected many ethical problems both independently as well as together with the nursing staff during every practical training period, they were able to resolve only few of them. Ethical problems were most frequently encountered during training in psychiatric nursing. On the grounds of their own impressions, the nursing students stated that their ability to detect and solve ethical problems improved during their training period. The primary factors related to this enhancement of their skills were teaching and the students’ readiness for selfinstruction. Gender, orientation of the studies and age were observed to be the most important among the underlying factors influencing the capability to detect and solve ethical problems as well as to engage in self-instruction. Based on the results obtained, suggestions for development as well as topics for further studies are presented through teaching of professional ethics and supervision during practical training.

Promoting Programming Learning. Engagement, Automatic Assessment with Immediate Feedback in Visualizations

The skill of programming is a key asset for every computer science student. Many studies have shown that this is a hard skill to learn and the outcomes of programming courses have often been substandard. Thus, a range of methods and tools have been developed to assist students’ learning processes. One of the biggest fields in computer science education is the use of visualizations as a learning aid and many visualization based tools have been developed to aid the learning process during last few decades. Studies conducted in this thesis focus on two different visualizationbased tools TRAKLA2 and ViLLE. This thesis includes results from multiple empirical studies about what kind of effects the introduction and usage of these tools have on students’ opinions and performance, and what kind of implications there are from a teacher’s point of view. The results from studies in this thesis show that students preferred to do web-based exercises, and felt that those exercises contributed to their learning. The usage of the tool motivated students to work harder during their course, which was shown in overall course performance and drop-out statistics. We have also shown that visualization-based tools can be used to enhance the learning process, and one of the key factors is the higher and active level of engagement (see. Engagement Taxonomy by Naps et al., 2002). The automatic grading accompanied with immediate feedback helps students to overcome obstacles during the learning process, and to grasp the key element in the learning task. These kinds of tools can help us to cope with the fact that many programming courses are overcrowded with limited teaching resources. These tools allows us to tackle this problem by utilizing automatic assessment in exercises that are most suitable to be done in the web (like tracing and simulation) since its supports students’ independent learning regardless of time and place. In summary, we can use our course’s resources more efficiently to increase the quality of the learning experience of the students and the teaching experience of the teacher, and even increase performance of the students. There are also methodological results from this thesis which contribute to developing insight into the conduct of empirical evaluations of new tools or techniques. When we evaluate a new tool, especially one accompanied with visualization, we need to give a proper introduction to it and to the graphical notation used by tool. The standard procedure should also include capturing the screen with audio to confirm that the participants of the experiment are doing what they are supposed to do. By taken such measures in the study of the learning impact of visualization support for learning, we can avoid drawing false conclusion from our experiments. As computer science educators, we face two important challenges. Firstly, we need to start to deliver the message in our own institution and all over the world about the new – scientifically proven – innovations in teaching like TRAKLA2 and ViLLE. Secondly, we have the relevant experience of conducting teaching related experiment, and thus we can support our colleagues to learn essential know-how of the research based improvement of their teaching. This change can transform academic teaching into publications and by utilizing this approach we can significantly increase the adoption of the new tools and techniques, and overall increase the knowledge of best-practices. In future, we need to combine our forces and tackle these universal and common problems together by creating multi-national and multiinstitutional research projects. We need to create a community and a platform in which we can share these best practices and at the same time conduct multi-national research projects easily.

Methods and Models for Accelerating Dynamic Simulation of Fluid Power Circuits

The objective of this dissertation is to improve the dynamic simulation of fluid power circuits. A fluid power circuit is a typical way to implement power transmission in mobile working machines, e.g. cranes, excavators etc. Dynamic simulation is an essential tool in developing controllability and energy-efficient solutions for mobile machines. Efficient dynamic simulation is the basic requirement for the real-time simulation. In the real-time simulation of fluid power circuits there exist numerical problems due to the software and methods used for modelling and integration. A simulation model of a fluid power circuit is typically created using differential and algebraic equations. Efficient numerical methods are required since differential equations must be solved in real time. Unfortunately, simulation software packages offer only a limited selection of numerical solvers. Numerical problems cause noise to the results, which in many cases leads the simulation run to fail. Mathematically the fluid power circuit models are stiff systems of ordinary differential equations. Numerical solution of the stiff systems can be improved by two alternative approaches. The first is to develop numerical solvers suitable for solving stiff systems. The second is to decrease the model stiffness itself by introducing models and algorithms that either decrease the highest eigenvalues or neglect them by introducing steady-state solutions of the stiff parts of the models. The thesis proposes novel methods using the latter approach. The study aims to develop practical methods usable in dynamic simulation of fluid power circuits using explicit fixed-step integration algorithms. In this thesis, twomechanisms whichmake the systemstiff are studied. These are the pressure drop approaching zero in the turbulent orifice model and the volume approaching zero in the equation of pressure build-up. These are the critical areas to which alternative methods for modelling and numerical simulation are proposed. Generally, in hydraulic power transmission systems the orifice flow is clearly in the turbulent area. The flow becomes laminar as the pressure drop over the orifice approaches zero only in rare situations. These are e.g. when a valve is closed, or an actuator is driven against an end stopper, or external force makes actuator to switch its direction during operation. This means that in terms of accuracy, the description of laminar flow is not necessary. But, unfortunately, when a purely turbulent description of the orifice is used, numerical problems occur when the pressure drop comes close to zero since the first derivative of flow with respect to the pressure drop approaches infinity when the pressure drop approaches zero. Furthermore, the second derivative becomes discontinuous, which causes numerical noise and an infinitely small integration step when a variable step integrator is used. A numerically efficient model for the orifice flow is proposed using a cubic spline function to describe the flow in the laminar and transition areas. Parameters for the cubic spline function are selected such that its first derivative is equal to the first derivative of the pure turbulent orifice flow model in the boundary condition. In the dynamic simulation of fluid power circuits, a tradeoff exists between accuracy and calculation speed. This investigation is made for the two-regime flow orifice model. Especially inside of many types of valves, as well as between them, there exist very small volumes. The integration of pressures in small fluid volumes causes numerical problems in fluid power circuit simulation. Particularly in realtime simulation, these numerical problems are a great weakness. The system stiffness approaches infinity as the fluid volume approaches zero. If fixed step explicit algorithms for solving ordinary differential equations (ODE) are used, the system stability would easily be lost when integrating pressures in small volumes. To solve the problem caused by small fluid volumes, a pseudo-dynamic solver is proposed. Instead of integration of the pressure in a small volume, the pressure is solved as a steady-state pressure created in a separate cascade loop by numerical integration. The hydraulic capacitance V/Be of the parts of the circuit whose pressures are solved by the pseudo-dynamic method should be orders of magnitude smaller than that of those partswhose pressures are integrated. The key advantage of this novel method is that the numerical problems caused by the small volumes are completely avoided. Also, the method is freely applicable regardless of the integration routine applied. The superiority of both above-mentioned methods is that they are suited for use together with the semi-empirical modelling method which necessarily does not require any geometrical data of the valves and actuators to be modelled. In this modelling method, most of the needed component information can be taken from the manufacturer’s nominal graphs. This thesis introduces the methods and shows several numerical examples to demonstrate how the proposed methods improve the dynamic simulation of various hydraulic circuits.

Mellom tradisjon og spel : didaktikk for tekstil folkekunst

Denne avhandlinga er resultatet av eit behov for å forske på og utvikle ein didaktikk for tekstilfaget ved Folkekunststudiet, Institutt for folkekultur, Høgskolen i Telemark, Noreg. Studiet med folkekunst som fagfelt er eit relativt ungt studium på høgskolen, som vart etablert i 1984. Problemstillinga i denne avhandlinga er korleis ein kan utvikle ein forskingsbasert didaktikk der dei grunnleggjande prinsippa som særmerkjer den tradisjonelle folkekunsten, vert tekne vare på. I arbeidet med avhandlinga har eg prøvd på å klårgjere problemstillinga ut frå ulike perspektiv. Forskingsarbeidet har fokus på kommunikasjon og arbeidsmåtar i ljos av ulike teoriar. Det er ei hermeneutisk tilnærming som er vald for den didaktiske forståinga. Det fyrste drøftingstemaet har søkjeljos på kommunikasjon og dialog ved vidareføring av tekstil folkekunst. Både estetiske, teoretiske, praktiske og sosiale aspekt er nedfelte i læreplanen for studiet og skal utgjere grunnlaget for kommunikasjon og arbeidsmåtar. I den skapande og kopierande prosessen er det utvikla språklege reiskapar for både den sosiale og den estetiske sida der den teoretiske og praktiske faktoren er integrert. Møte med døme på tekstile tradisjonar så vel som praktisk forming av tekstilar har ført til refleksjon og dialog som involverer kontemplasjon, korrespondens og imaginasjon. Det andre temaet som er drøfta, er vidareføring av tradisjonelt visuelt formspråk. Her er merksemda retta mot kva som har skjedd formalt med ei gruppe tradisjonelle formelement i tekstilar i den institusjonelle vidareføringa over eit lengre tidsperspektiv. Resultatet syner at mange tradisjonelle formelement er borte frå den institusjonelle produksjonen. Formelementa kan ha fått ei meir naturalistisk utforming, eller dei er overførte til andre tradisjonelle tekstilteknikkar enn dei som var utgangspunktet. Rombeforma i den institusjonelle produksjonen er utført i færre variasjonar og kombinasjonar enn i den tradisjonelle produksjonen. Konklusjonen på drøftingstemaet er at spelereglar og spatialitet i høve til den formale komponenten i utvalet med tradisjonelle tekstilar ikkje er vidareført i alle gruppene av institusjonelle produkt. Resultatet kan få innverknad og fylgjer for utforming av ein framtidig didaktikk for faget. Arbeidsmåte og erfaring frå vidareføring av tekstile tradisjonar er det tredje temaet som er drøfta i avhandlinga. Kopiering og skapande prosessar er arbeidsmåtar som er brukte ved studiet i dag, og dei utgjer grunnlag for drøftingar i relasjon til vidareføring og erfaring. Konklusjonen er at i den skapande prosessen korrigerer tradisjonen utforminga, medan i kopiprosessen er eigen stilvilje og improvisering resultat av prosessane. Personar som deltek i prosessane, har sett seg sjølve og si historiske forankring inn i spelet, der visuelt og verbalt språk er resultat av integrasjon av tradisjonar. Dei tre drøftingstemaa utgjer grunnlaget for at didaktikk for folkekunst og tekstil kan bli intersubjektiv forståing av kva ein didaktikk for vidareføring av folkekunst med vekt på tekstil kan vere i utdanninga i dag. Indre og ytre dialog i skapande og kopierande prosessar femner om estetiske, materielle og tekniske faktorar sett i høve til spelereglar, spelerom, spatialitet og samspel i møte med tekstile tradisjonar. Samla utgjer det ein forskingsbasert didaktikk for faget der den overordna intensjonen er samtykke mellom tradisjon og spel.

Kiinteistönvälittäjän tiedonantovelvollisuus käytetyn asunnon kaupassa

Tutkielman tarkoituksena on selvittää kiinteistövälittäjän tiedonantovelvollisuuden laajuus käytetyn asunnon kaupassa. Tutkielma noudattaa lainopillista tutkimusmenetelmää ja sen perustan muodostaa kiinteistönvälitystä ja asuntokauppaa sääntelevä lainsäädäntö ja sen tulkinta. Tarkemmat rajaukset kiinteistönvälittäjän tiedonantovelvollisuudelle sekä tukea lain tulkinnalle haetaan aihetta käsittelevistä korkeimman oikeuden ennakkopäätöksistä ja oikeuskirjallisuudesta. Ennakkopäätösten sekä kuluttajariitalautakunnan ratkaisujen läpikäynti ja tulkinta muodostavat tutkimuksen ytimen. Tutkimus osoittaa, että kiinteistönvälittäjän tiedonantovelvollisuuteen vaikuttaa monta tekijää kussakin yksittäisessä asuntokaupassa, jolloin tiedonantovelvollisuuden täyttäminen on monisyinen ja tulkinnanvarainen seikka. Laki ei siis anna tyhjentävää vastausta kiinteistönvälittäjän tiedonantovelvollisuudesta, vaan se on kokonaisuus, joka täytyy arvioida voimassa olevan lain sekä ennakkopäätösten linjausten valossa.

Tuoteideoiden ja niiden innovaatiopotentiaalin arviointi pääomasijoittajan näkökulmasta

Tässä tutkimuksessa selvitetään, miten pääomasijoittajat arvioivat tuoteideoita sekä niiden potentiaalisuutta kehittyä innovaatioiksi. Tutkimusongelmaa lähestytään kolmen osaongelman kautta: 1. Millaisia prosesseja, menetelmiä tai käytäntöjä pääomasijoittajilla on tuoteideoiden arviointiin; 2. Millaisia innovaation tekijöitä, komponentteja tai attribuutteja pääomasijoittajat huomioivat tuoteideaa arvioidessaan; 3. Millaisia tekijöitä pääomasijoittajat huomioivat tuoteidean innovaatiopotentiaalin arvioinnissa, ja kuinka tärkeitä nämä tekijät ovat. Tutkimusongelman selvittämiseksi ja ymmärtämiseksi kuvataan innovaatio -käsite: mitä on innovaatiotoiminta, millainen on innovaatioprosessi ja miten ideasta edetään kohti tuotetta ja mahdollista innovaatiota. Potentiaalisten ideoiden rahoitusta tarkastellaan sekä yleisellä tasolla että pääomasijoittajien näkökulmasta. Pääomasijoittamisen historia, sijoitusmotiivit sekä pääomasijoitusprosessi selvitetään. Lisäksi selvitetään tuoteinnovaation tekijät, jotka tässä tutkimuksessa ovat syötteet, prosessit ja tuotokset. Tutkimukseen liittyvä tiedonkeruu suoritettiin verkkokyselynä keväällä 2013. Tutkimus oli kokonaistutkimus, ja kyselylomake lähetettiin kaikille FVCA:n jäsenille (Suomen pääomasijoi-tusyhdistys ry:n varsinaiset jäsenet). Empiirisessä osiossa selvitettiin pääomasijoittajien taus-tatietojen lisäksi tuoteidean arviointiin liittyviä menetelmiä ja järjestelmiä, syötteitä, prosesseja, tuotoksia sekä tuoteidean innovaatiopotentiaaliin liittyviä asioita. Pääomasijoittajia kiinnostaa eniten yritysten kasvuvaiheen rahoitus ja toimialoista teollisuus sekä energia. Tuoteideoita ja niiden innovaatiopotentiaalia arvioidaan useiden eri tekijöiden perusteella, mutta vakiintuneita ja kiinteitä arviointimenetelmiä tai -prosesseja on harvalla yrityksistä.

Kuntasektorin toimintojen yhtiöittäminen – taustalla NPM-doktriini ja lakimuutokset

Tutkielman tavoitteena on ensinnäkin selvittää, miten New Public Management (NPM) -doktriini ja muutokset yksityisen ja julkisen sektorin välistä kilpailuneutraliteettiongelmaa korjaavassa lainsäädännössä ovat vaikuttaneet kuntien toimintojen yhtiöittämiseen. Toisena tutkimuksen kohteena on selvittää erilaiset tavat yhtiöittää liiketoimintoja sekä niiden valintaan vaikuttavat tekijät. Empiirinen osio on toteutettu kvalitatiivisella ja deskriptiivisellä tutkimusmetodologialla. Yhtiöittämisiä tarkastellaan tapaustutkimuksina, johon on valittu tarkemman tutkimuksen kohteeksi kaksi toimialaa: tilahallinto ja satamateollisuus. Kyseisten yhtiöittämistapausten avulla pyritään tuomaan monipuolisesti esille erilaisia yhtiöittämisen taustatekijöitä ja yhtiöittämistapoja. On varsin helppo havaita ne tapaukset, joissa yhtiöittämisen taustalla on ollut tulevaan yhtiöittämisvelvollisuuteen varautuminen. Tähän ryhmään kuuluvat muun muassa lähes kaikki kuntien liikelaitosmuodossa toimivat satamat. Puolestaan kaikki tehokkuuteen, päätöksenteon nopeutumiseen ja muihin liikemaailmasta omaksuttuihin elementteihin perustuvat tavoitteet yhtiöittämisen taustalla on pääsääntöisesti helppo luokitella NPM-doktriiniin liittyviksi. Kuntien tilahallinnot kuuluvat tähän ryhmään, koska niitä ei pääsääntöisesti koske yhtiöittämisvelvollisuus. Yhtiöittämisessä on otettava huomioon useita eri aspekteja, ja myös yhtiöittämistapojen välillä on huomattavia eroja. Tämän vuoksi on tarpeen kartoittaa kaikki kulloiseenkin tilanteeseen vaikuttavat tekijät, jotta voidaan löytää optimaalisin yhtiöittämistapa.