ME - Mobile Electronic Personality

Digital services require personal information for a variety of reasons. Due to advances in communication technology, new types of services are evolving alongwith traditional Internet services. Due to the diversity of services, the traditional approaches to personal information handling designed for Internet services are inadequate. Therefore, new approaches are necessary. In this thesis, a solution where personal information is stored in and accessed from the user's mobile device is presented. This approach is called Mobile Electronic Personality (ME). The ME approach is compared to the existing approaches which rely on a database either at a service, a trusted third party or a client program. Various personal information properties are taken into account in the comparison of storage locations. The thesis presents both the internal and the communication architecture of the ME. The internal architecture defines how the information is stored in the mobile device. The communication architecture defines how the information can be accessed by different types of services from the ME. The use of the architecture is described for services in different environments. A simple ME based solution for the authentication of a user is defined. The authentication of service, which is required to protect the privacy of the users is also presented.

ANVL -ohjelmiston käyttö protokollavalidoinnissa

Tietoliikennelaitteiden toiminta perustuu yleisesti sovittuihin standardeihin ja suosituksiin. Standardinmukaisuuden varmistamiseksi tuotteet tulee testata sekä standardeja että muita tuotteita vastaan, jotta laitteiden yhteensopivuudesta voidaan varmistua. Ohjelmistojen koon ja monimutkaisuuden jatkuvasti kasvaessa myös tarve löytää automatisoituja testausmenetelmiä kasvaa. Diplomityön tavoitteena oli selvittää soveltuuko ANVL -protokollavalidointiohjelmisto Tellabsin modeemituotteiden hyväksyntätestaukseen ja sovittaa ANVL osaksi Tellabsin testauskäytäntöä. Diplomityössä käydään lisäksi läpi ohjelmistotestauksen peruskäsitteitä ja esitetään ANVL:n sisäinen rakenne ja toimintaperiaatteet. Työssä havaittiin, että ANVL sopii hyvin yksittäisten datasiirtolaitteiden validointitestaukseen. ANVL:n räätälöintimahdollisuudet ovat hyvät ja sitä on mahdollista laajentaa itse toteutetuilla protokollavalidointipaketeilla. Tuote tullaan ottamaan käyttöön Tellabsin uusissa tuotekehitysprojekteissa.

Re-usable ASIC integrationverification software architecture

Mikropiirien valmistus- ja suunnittelutekniikoiden kehittyminen mahdollistaa yhä monimutkaisempien mikropiirien valmistamisen. Piirien verifioinnista onkin tullut prosessin aikaa vievin osa,sillä kompleksisuuden kasvaessa kasvaa verifioinnin tarve eksponentiaalisesti. Vaikka erinäisiä strategioita piirien integroinnin verifiointiin on esitetty, mm. verifioinnin jakaminen koko suunnitteluprosessin ajalle, jopa yli puolet koko piirin suunnitteluun ja valmistukseen käytetystä työmäärästä kuluu verifiointiin. Uudelleenkäytettävät komponentit ovat pääosassa piirin suunnittelussa, mutta verifioinnissa uudelleenkäytettävyyttä ei ole otettu kunnolla käyttöön ainakaan verifiointiohjelmistojen osalta. Tämä diplomityö esittelee uudelleenkäytettävän mikropiirien verifiointiohjelmistoarkkitehtuurin, jolla saadaan verifiointitaakkaa vähennettyä poistamalla verifioinnissa käytettävien ohjelmistojen uudelleensuunnittelun ja toteuttamisen tarvetta.

Strategisten investointienhallinta ryhmäpäätöksenteon tukisysteemien avulla

Tutkielman tavoitteena on kehittää prosessi yrityksen strategisten investointien hal-lintaan siten, että yrityksen strateginen arkkitehtuuri mukailee dynaamisten mark-kinoiden jatkuvasti muuttuvia kriittisiä menestystekijöitä. Tutkielma tarjoaa ratkai-sun strategisten investointien kohtaamaan epävarmuuteen, kompleksisuuteen ja si-säisiin konflikteihin luomalla dynaamisiin kyvykkyyksiin perustuvan prosessin, joka toteutetaan ryhmäpäätöksenteon tukisysteemien avulla asiantuntijatietoa hyö-dyntäen. Yrityksen strateginen arkkitehtuuri on mahdollista mallintaa skenaariopohjaisen strategiakartan eli kyvykkyyskartan avulla. Kyvykkyyskarttaan sisällytetyt QFD- ja AHP-mallit mahdollistavat strategisten investointien arvottamisen markkinoiden kriittisten menestystekijöiden suhteen. Dynaamisiin kyvykkyyksiin perustuvat lead user- ja skenaariosuunnitteluvaiheet mahdollistavat puolestaan joustavan investoin-tistrategian luonnin. Tutkielma osoittaa dynaamisia kyvykkyyksiä ja ryhmäpäätök-senteon tukisysteemejä hyödyntävän strategisten investointien hallintaprosessin tarjoavan ratkaisun strategisien investointipäätösten kohtaamiin haasteisiin.Ky-vykkyyskarttaan pohjautuvan strategisen arkkitehtuurin optimointimallin katsottiin olevan realistinen ja uskottava ja korostavan investointien strategisia vaikutuksia.

Highly Available Enterprise-level Application Server Architecture

Korkeasaatavuus on olennainen osa nykyaikaisissa, integroiduissa yritysjärjestelmissä. Yritysten kansainvälistyessä tiedon on oltava saatavissa ympärivuorokautisesti, mikä asettaa yhä kovempia vaatimuksia järjestelmän yksittäisten osien saatavuudelle. Kasvava tietojärjestelmäintegraatio puolestaan tekee järjestelmän solmukohdista kriittisiä liiketoiminnan kannalta. Tässä työssä perehdytään hajautettujen järjestelmien ominaisuuksiin ja niiden asettamiin haasteisiin. Esiteltyjä teknologioita ovat muun muassa väliohjelmistot, klusterit ja kuormantasaus. Yrityssovellusten pohjana käytetty Java 2 Enterprise Edition (J2EE) -teknologia käsitellään olennaisilta osiltaan. Työssä käytetään sovelluspalvelinalustana BEA WebLogic Server -ohjelmistoa, jonka ominaisuudet käydään läpi hajautuksen kannalta. Työn käytännön osuudessa toteutetaan kahdelle erilaiselle olemassa olevalle yrityssovellukselle korkean saatavuuden sovelluspalvelinympäristö, joissa sovellusten asettamat rajoitukset on otettu huomioon.

Planning and control of internal development projects in a fast changing environment: Case study

Tutkimuksen tarkoituksena on kuvata ja ymmärtää kuinka sisäisiä kehityshankkeita voidaan hallita onnistuneesti kun toimitaan nopeasti muuttuvassa ympäristössä. Tutkimus kuvailee etenkin projekteille tärkeitä menestymistekijöitä, kuten suunnittelu, kontrollointi ja päätöksenteko. Tutkimus selvittää yleisimmät ongelma-alueet case-organisaation sisäisten kehityshankkeiden hallinnassa. Tutkimus on luonteeltaan laadullinen tutkimus, jossa tutkimusmenetelmänä on käytetty tapaustutkimusta. Empiirisessa osassa käsittellään case-organisaation sisäisiä informaatioteknologia-hankkeita (IT) ja uusien konseptien kehityshankkeita (NCD). iSisäisten kehityshankkeiden erilaisuuden ymmärtäminen oli tutkimuksen tärkein tulos. Tutkimuksen empiirinen osio osoitti sen, että epävarmuudella on erittäin suuri vaikutus projektihallintaan sekä projektin kontrollointiin. Case-organisaation IT-projektien onnistuminen riippuu organisaatiomuu-toksen onnistumisesta. Asiakkaisiin ja markkinoihin liittyvät epävarmuudet ovat vaikuttavimmat NCD projektien epävarmuuksista. Näillä epävarmuuk-sil­la on vaikutusta projektihallintaan jonka myötä NCD projektit juuttuvat useim­mi­ten noidankehiin tai ne lopetetaan jo aikaisessa vaiheessa.

Modelling the Knowledge Interface between Sales and Production Functions of a Company. Case: New Service Development Process.

Yrityksen sisäisten rajapintojen tunteminen mahdollistaa tiedonvaihdon hallinnan läpi organisaation. Idean muokkaaminen kannattavaksi innovaatioksi edellyttää organisaation eri osien läpi kulkevaa saumatonta prosessiketjua sekä tietovirtaa. Tutkielman tavoitteena oli mallintaa organisaation kahden toiminnallisesti erilaisen osan välinen tiedon vaihto. Tiedon vaihto kuvattiin rajapintana, tietoliittymänä. Kolmiulotteinen organisaatiomalli muodosti tutkimuksen pääteorian. Se kytkettiin yrityksen tuotanto- ja myyntiosiin, kuten myös BestServ-projektin kehittämään uuteen palvelujen kehittämisen prosessiin. Uutta palvelujen kehittämisen prosessia laajennettiin ISO/IEC 15288 standardin kuvaamalla prosessimallilla. Yritysarkkitehtuurikehikoita käytettiin mallintamisen perustana. Tietoliittymä nimenä kuvastaa näkemystä siitä, että tieto [tietämys] on olemukseltaan yksilöiden tai ryhmien välistä. Mallinnusmenetelmät eivät kuitenkaan vielä mahdollista tietoon [tietämykseen] liittyvien kaikkien ominaisuuksien mallintamista. Tietoliittymän malli koostuu kolmesta osasta, joista kaksi esitetään graafisessa muodossa ja yksi taulukkona. Mallia voidaan käyttää itsenäisesti tai osana yritysarkkitehtuuria. Teollisessa palveluliiketoiminnassa sekä tietoliittymän mallinnusmenetelmä että sillä luotu malli voivat auttaa konepajateollisuuden yritystä ymmärtämään yrityksen kehittämistarpeet ja -kohteet, kun se haluaa palvelujen tuottamisella suuremman roolin asiakasyrityksen liiketoiminnassa. Tietoliittymän mallia voidaan käyttää apuna organisaation tietovarannon ja tietämyksen mallintamisessa sekä hallinnassa ja näin pyrkiä yhdistämään ne yrityksen strategiaa palvelevaksi kokonaisuudeksi. Tietoliittymän mallinnus tarjoaa tietojohtamisen kauppatieteelliselle tutkimukselle menetelmällisyyden tutkia innovaatioiden hallintaa sekä organisaation uudistumiskykyä. Kumpikin tutkimusalue tarvitsevat tarkempaa tietoa ja mahdollisuuksia hallita tietovirtoja, tiedon vaihtoa sekä organisaation tietovarannon käyttöä.

Value added logistics in supply and demand chains. Smile. Part 1. eBusiness between global company and itslocal sme supplier network

VALOSADE (Value Added Logistics in Supply and Demand Chains) is the research project of Anita Lukka's VALORE (Value Added Logistics Research) research team inLappeenranta University of Technology. VALOSADE is included in ELO (Ebusiness logistics) technology program of Tekes (Finnish Technology Agency). SMILE (SME-sector, Internet applications and Logistical Efficiency) is one of four subprojects of VALOSADE. SMILE research focuses on case network that is composed of small and medium sized mechanical maintenance service providers and global wood processing customers. Basic principle of SMILE study is communication and ebusiness insupply and demand network. This first phase of research concentrates on creating backgrounds for SMILE study and for ebusiness solutions of maintenance case network. The focus is on general trends of ebusiness in supply chains and networksof different industries; total ebusiness system architecture of company networks; ebusiness strategy of company network; information value chain; different factors, which influence on ebusiness solution of company network; and the correlation between ebusiness and competitive advantage. Literature, interviews and benchmarking were used as research methods in this qualitative case study. Networks and end-to-end supply chains are the organizational structures, which can add value for end customer. Information is one of the key factors in these decentralized structures. Because of decentralization of business, information is produced and used in different companies and in different information systems. Information refinement services are needed to manage information flows in company networksbetween different systems. Furthermore, some new solutions like network information systems are utilised in optimising network performance and in standardizingnetwork common processes. Some cases have however indicated, that utilization of ebusiness in decentralized business model is not always a necessity, but value-add of ICT must be defined case-specifically. In the theory part of report, different ebusiness and architecture models are introduced. These models are compared to empirical case data in research results. The biggest difference between theory and empirical data is that models are mainly developed for large-scale companies - not for SMEs. This is due to that implemented network ebusiness solutions are mainly large company centered. Genuine SME network centred ebusiness models are quite rare, and the study in that area has been few in number. Business relationships between customer and their SME suppliers are nowadays concentrated more on collaborative tactical and strategic initiatives besides transaction based operational initiatives. However, ebusiness systems are further mainly based on exchange of operational transactional data. Collaborative ebusiness solutions are in planning or pilot phase in most case companies. Furthermore, many ebusiness solutions are nowadays between two participants, but network and end-to-end supply chain transparency and information systems are quite rare. Transaction volumes, data formats, the types of exchanged information, information criticality,type and duration of business relationship, internal information systems of partners, processes and operation models (e.g. different ordering models) differ among network companies, and furthermore companies are at different stages on networking and ebusiness readiness. Because of former factors, different customer-supplier combinations in network must utilise totally different ebusiness architectures, technologies, systems and standards.

Value added logistics in supply and demand chain. Smile. Part 2. eBusiness in a service business. Case: A maintenance and operations network in forest industry

VVALOSADE is a research project of professor Anita Lukka's VALORE research team in the Lappeenranta University of Technology. The VALOSADE includes the ELO technology program of Tekes. SMILE is one of four subprojects of the VALOSADE. The SMILE study focuses on the case of the company network that is composed of small and micro-sized mechanical maintenance service providers and forest industry as large-scale customers. The basic principle of the SMILE study is the communication and ebusiness in supply and demand networks. The aim of the study is to develop ebusiness strategy, ebusiness model and e-processes among the SME local service providers, and onthe other hand, between the local service provider network and the forest industry customers in a maintenance and operations service business. A literature review, interviews and benchmarking are used as research methods in this qualitative case study. The first SMILE report, 'Ebusiness between Global Company and Its Local SME Supplier Network', concentrated on creating background for the SMILE study by studying general trends of ebusiness in supply chains and networks of different industries. This second phase of the study concentrates on case network background, such as business relationships, information systems and business objectives; core processes in maintenance and operations service network; development needs in communication among the network participants; and ICT solutions to respond needs in changing environment. In the theory part of the report, different ebusiness models and frameworks are introduced. Those models and frameworks are compared to empirical case data. From that analysis of the empirical data, therecommendations for the development of the network information system are derived. In process industry such as the forest industry, it is crucial to achieve a high level of operational efficiency and reliability, which sets up great requirements for maintenance and operations. Therefore, partnerships or strategic alliances are needed between the network participants. In partnerships and alliances, deep communication is important, and therefore the information systems in the network also are critical. Communication, coordination and collaboration will increase in the case network in the future, because network resources must be optimised to improve competitive capability of the forest industry customers and theefficiency of their service providers. At present, ebusiness systems are not usual in this maintenance network. A network information system among the forest industry customers and their local service providers actually is the only genuinenetwork information system in this total network. However, the utilisation of that system has been quite insignificant. The current system does not add value enough either to the customers or to the local service providers. At present, thenetwork information system is the infomediary that share static information forthe network partners. The network information system should be the transaction intermediary, which integrates internal processes of the network companies; the network information system, which provides common standardised processes for thelocal service providers; and the infomediary, which share static and dynamic information on right time, on right partner, on right costs, on right format and on right quality. This study provides recommendations how to develop this system in the future to add value to the network companies. Ebusiness scenarios, vision, objectives, strategies, application architecture, ebusiness model, core processes and development strategy must be considered when the network information system will be developed in the next development step. The core processes in the case network are demand/capacity management, customer/supplier relationship management, service delivery management, knowledge management and cash flow management. Most benefits from ebusiness solutions come from the electrifying of operational level processes, such as service delivery management and cash flow management.

Product Platform Development from the Product Lines' Perspective: Case of Switching Platform

In the era of fast product development and customized product requirements, the concept of product platform has proven its power in practice. The product platform approach has enabledcompanies to increase the speed of product introductions while simultaneously benefit from efficiency and effectiveness in the development and production activities. The product platforms are technological bases, which can be used to develop several derivative products, and hence, the differentiation can be pushed closer to the product introduction. The product platform development has some specific features, which differ somewhat from the product development of single products. The time horizon is longer, since the product platform¿slife cycle is longer than individual product's. The long time-horizon also proposes higher market risks and the use of new technologies increases the technological risks involved. The end-customer interface might be far away, but there is not a lack of needs aimed at the product platforms ¿ in fact, the product platform development is very much balancing between the varying needs set to it by thederivative products. This dissertation concentrated on product platform development from the internal product lines' perspective of a singlecase. Altogether six product platform development factors were identified: 'Strategic and business fit of product platform', 'Project communication and deliverables', 'Cooperation with product platform development', 'Innovativeness of product platform architecture and features', 'Reliability and quality of product platform', and 'Promised schedules and final product platform meeting the needs'. From the six factors, three were found to influence quite strongly the overall satisfaction, namely 'Strategic and business fit of product platform', 'Reliability and quality of product platform', and 'Promised schedules and final product platform meeting the needs'. Hence, these three factors might be the ones a new product platform development unit should concentrate first in order to satisfy their closest customers, the product lines. The 'Project communication and deliverables' and 'Innovativeness of product platform architecture and features' were weaker contributors to the overall satisfaction. Overall, the factors explained quite well the satisfaction of the product lines with product platform development. Along the research, several interesting aspects about the very basic nature of the product platform development were found. The long time horizon of the product platform development caused challenges in the area of strategic fIT - a conflict between the short-term requirements and long term needs. The fact that a product platform was used as basis of several derivative products resulted into varying needs, and hence the match with the needs and the strategies. The opinions, that the releases of the larger product lines were given higher priorities, give an interesting contribution to the strategy theory of powerand politics. The varying needs of the product lines, the strengths of them as well as large number of concurrent releases set requirements to prioritization. Hence, the research showed the complicated nature of the product platform development in the case unIT - the very basic nature of the product platform development might be its strength (gaining efficiency and effectiveness in product development and product launches) but also the biggest challenge (developing products to meet several needs). As a single case study, the results of this research are not directly generalizable to all the product platform development activities. Instead, the research serves best as a starting point for additional research as well as gives some insights about the factors and challengesof one product development unit.

The use of branched ketenedimers in solving the deposit problems related to the internal sizing of uncoated fine paper

Alkyl ketene dimers (AKD) are effective and highly hydrophobic sizing agents for the internal sizing of alkaline papers, but in some cases they may form deposits on paper machines and copiers. In addition, alkenyl succinic anhydrides (ASA)- based sizing agents are highly reactive, producing on-machine sizing, but under uncontrolled wet end conditions the hydrolysis of ASA may cause problems. This thesis aims at developing an improved ketene dimer based sizing agent that would have a lower deposit formation tendency on paper machines and copiers than a traditional type of AKD. The aim is also to improve the ink jet printability of a AKD sized paper. The sizing characteristics ofketene dimers have been compared to those of ASA. A lower tendency of ketene dimer deposit formation was shown in paper machine trials and in printability tests when branched fatty acids were used in the manufacture of a ketene dimer basedsizing agent. Fitting the melting and solidification temperature of a ketene dimer size to the process temperature of a paper machine or a copier contributes to machine cleanliness. A lower hydrophobicity of the paper sized with branched ketene dimer compared to the paper sized with traditional AKD was discovered. However, the ink jet print quality could be improved by the use of a branched ketene dimer. The branched ketene dimer helps in balancing the paper hydrophobicity for both black and color printing. The use of a high amount of protective colloidin the emulsification was considered to be useful for the sizing performance ofthe liquid type of sizing agents. Similar findings were indicated for both the branched ketene dimer and ASA.

Alterations in growth and canopy architecture among dwarf, semidwarf and tall oat lines grown under northern conditions

Selostus: Korkeudeltaan eri tyyppisten kauralinjojen kasvu ja sadontuotto pohjoisissa viljelyoloissa