Fiber-reinforced Composite as Oral Implant Material. Experimental studies of glass fiber and bioactive glass in vitro and in vivo

Fiber-reinforced composite as oral implant material: Experimental studies of glass fiber and bioactive glass in vitro and in vivo Department of Prosthetic Dentistry and Biomaterials Science, Institute of Dentistry, University of Turku, Turku, Finland 2008. Biocompatibility and mechanical properties are important variables that need to be determined when new materials are considered for medical implants. Special emphasis was placed on these characteristics in the present work, which aimed to investigate the potential of fiber-reinforced composite (FRC) material as an oral implant. Furthermore, the purpose of this study was to explore the effect of bioactive glass (BAG) on osseointegration of FRC implants. The biocompatibility and mechanical properties of FRC implants were studied both in vitro and in vivo. The mechanical properties of the bulk FRC implant were tested with a cantilever bending test, torsional test and push-out test. The biocompatibility was first evaluated with osteoblast cells cultured on FRC substrates. Bone bonding was determined with the mechanical push-out test and histological as well as histomorplanimetric evaluation. Implant surface was characterized with SEM and EDS analysis. The results of these studies showed that FRC implants can withstand the static load values comparably to titanium. Threaded FRC implants had significantly higher push-out strength than the threaded titanium implants. Cell culture study revealed no cytotoxic effect of FRC materials on the osteoblast-like-cells. Addition of BAG particles enhanced cell proliferation and mineralization of the FRC substrates The in vivo study showed that FRC implants can withstand static loading until failure without fracture. The results also suggest that the FRC implant is biocompatible in bone. The biological behavior of FRC was comparable to that of titanium after 4 and 12 weeks of implantation. Furthermore, addition of BAG to FRC implant increases peri-implant osteogenesis and bone maturation.

Critical Success and Failure Factors of Knowledge Management Implementation in a Large Multinational Company

More and more companies are interested in implementing knowledge management. However, the majority of knowledge management initiatives will fail to have any significant impact. In this study, theories regarding knowledge management implementation and adoption are investigated further. The objective of this study is to deepen understanding regarding the critical factors that contribute to successful knowledge management adoption in large multinational companies. The study is formulated around the following four research questions: 1. What are the key success and failure factors in knowledge management implementation? 2. How can knowledge management adoption be improved at the individual, group and organizational levels of the company? 3. What are the critical factors that hinder knowledge management adoption in the case company? 4. How can the case company promote the adoption of knowledge management among company personnel? The methodology used in this study is a combination of a literature review and an explanatory, exploratory, qualitative single-case study. The literature review answers the first and second research questions. Based on the literature review, a framework is presented to illustrate the factors contributing to the success of knowledge management implementation. The framework also links together knowledge management implementation and adoption. The third research question is answered by revealing the relevant findings from 21 expert interviews and 2 online questionnaires with 42 respondents in total. By comparing and contrasting the results of the literature review with the findings of the empirical case study, the fourth research question is answered. The concrete outcomes of this study are a framework to elucidate the factors contributing to the success of knowledge management implementation, a case study highlighting the issues that hinder knowledge management adoption within the case company, and recommendations for the case company.

Venous thromboembolism and obstruction after pacemaker implantation. - A Prospective Study of 150 Consecutive Cardiac Pacing Device Implantations

Background: Pacemaker implantation (PMI) may predispose to venous thromboembolism (VTE) and obstruction (VO). This prospective study aimed at quantifying changes in venous calibers, and at determining the incidence of symptomatic and asymptomatic VTE/VO after PMI. Further goals included an assessment of the role of transesophageal echocardiography (TEE) in the diagnosis of lead-related central venous thrombi (CVT), and determination of predictors for VTE/VO. Methods: 150 (mean age 67; 61% male) consecutive patients with first PMI were enrolled and followed for 6 months. Contrast venography was performed at baseline and 6 months after PMI to measure venous diameters, and to detect stenosis, total occlusions and thrombi. TEE was conducted in 66 patients. Based on clinical suspicion, work-up for pulmonary embolism (PE) or acute deep vein thrombosis (DVT) were performed as needed. A total of 50 cases underwent longer-term (mean 2.4 years) follow-up venography. All cases with VTE/VO during the initial 6 months, and their matched controls, were selected for a case-control study focused on possible predictive role of laboratory and patient-related factors for the development of VTE/VO. Results: 10 (7 %) patients were found to have baseline venous abnormalities (e.g. 8 obstructions). Mean venous diameters diminished significantly during the first 6 months, but no further reduction occurred in late follow-up. New VO was discovered in 19 patients (14 %; 14 stenosis, 5 total occlusions; all asymptomatic). Small non-obstructive thrombi were found in 20/140 (14 %) 6-month venograms. TEE at 6 months disclosed CVT in 6 (9 %) patients. One (0.7 %) patient had acute symptomatic upper-extremity DVT, and PE was discovered in 5/150 (3.3 %) patients during the first 6 months with no further cases thereafter. At 6 months, the total number of cases with VTE/VO amounted to 47 (31.3 %). Additionally, the later 2-year venograms (n=50) disclosed 4 (8 %) total occlusions and 1 (2 %) stenosis. In the case-control study, no parameter was predictive of venous end-points as a single variable, but there appeared to be significant clustering of traditional VTE risk-factors among the cases. Laboratory parameters showed a definite acute hypercoagulative state induced by PMI, but its degree did not predict subsequent development of VTE/VO. Conclusions: This study shows that VTE/VO is relatively common after PMI with an overall incidence of at least 30 %. Although the majority of the lesions are asymptomatic and clinically benign, cases of PE were also encountered, and totally occluded veins may hamper future upgrading or replacement of pacing system. Venous complications seem difficult to prognosticate as firm predictors were not identified from a wide range of parameters analyzed in this study, although clustering of classic VTE risk factors may be a predisposing factor. Parameters related to implantation procedure or pacing systems and the severity of implantation-induced trauma did not emerge as predictors.

Microenterprise success and failure factors

The purpose of this study is to identify factors contributory to success or failure of a microenterprise. Microenterprise is an enterprise with less than10 employees. About 99 % of all Finnish enterprises fall in this category. Earlier studies do not provide a comprehensive view on microenterprise success and failure factors. The theoretical part discusses the definition of success and failure, previous research and results already established about the topic and categories of business environment. The empirical part is founded on quantitative survey results from 204 Finnish microenterprises. The questions of the survey were based on previous surveys, literature and intuition. Both success and failure factors were enquired. Summary of the results was made and the results were compared among successful and unsuccessful enterprises. In open-end questions, the most important factors mentioned to affect enterprise performance positively were "Employees", "Customers" and "Skills, knowledge, education and experience." The most important factors affecting enterprise performance negatively were "Economical situation", "Employees availability and attitudes" as well as "Political decisions and passed laws". In Likert-scale set of questions, the most significant factors from the point of view of enterprise performance were "Product and / or service good quality", "Good reputation of the company" and "Staff's strong skills". The least significant factors were "Effect of marketing and promotion", "Conflicts" and "Differences of points of views of different generations". By Likert-scale set of questions, it was also tested which operations the enterprises perform, and according to the results, successful enterprises found "Performing a market research", "Use of distribution channel in sales" and "Expanding to new markets" less important than unsuccessful enterprises. The tests proved that the age of the enterprise correlates with the level of success of the enterprise: The younger the enterprise, the more successful it is. In addition, the results show that if the enterprise is family based, the less successful it is. In addition, there was also slight correlation between success and the level of growth, indicating that higher the level of growth the more successful the enterprise is. From the business environment point of view, the key finding was that internal factors affect more on the success of an enterprise than external factors, and that external factors affect more on the failure of an enterprise than internal factors.

Translational models of coronary artery disease, myocardial infarction and heart failure. Development, validation and in vivo imaging studies using positron emission tomography

Coronary artery disease is an atherosclerotic disease, which leads to narrowing of coronary arteries, deteriorated myocardial blood flow and myocardial ischaemia. In acute myocardial infarction, a prolonged period of myocardial ischaemia leads to myocardial necrosis. Necrotic myocardium is replaced with scar tissue. Myocardial infarction results in various changes in cardiac structure and function over time that results in “adverse remodelling”. This remodelling may result in a progressive worsening of cardiac function and development of chronic heart failure. In this thesis, we developed and validated three different large animal models of coronary artery disease, myocardial ischaemia and infarction for translational studies. In the first study the coronary artery disease model had both induced diabetes and hypercholesterolemia. In the second study myocardial ischaemia and infarction were caused by a surgical method and in the third study by catheterisation. For model characterisation, we used non-invasive positron emission tomography (PET) methods for measurement of myocardial perfusion, oxidative metabolism and glucose utilisation. Additionally, cardiac function was measured by echocardiography and computed tomography. To study the metabolic changes that occur during atherosclerosis, a hypercholesterolemic and diabetic model was used with [18F] fluorodeoxyglucose ([18F]FDG) PET-imaging technology. Coronary occlusion models were used to evaluate metabolic and structural changes in the heart and the cardioprotective effects of levosimendan during post-infarction cardiac remodelling. Large animal models were used in testing of novel radiopharmaceuticals for myocardial perfusion imaging. In the coronary artery disease model, we observed atherosclerotic lesions that were associated with focally increased [18F]FDG uptake. In heart failure models, chronic myocardial infarction led to the worsening of systolic function, cardiac remodelling and decreased efficiency of cardiac pumping function. Levosimendan therapy reduced post-infarction myocardial infarct size and improved cardiac function. The novel 68Ga-labeled radiopharmaceuticals tested in this study were not successful for the determination of myocardial blood flow. In conclusion, diabetes and hypercholesterolemia lead to the development of early phase atherosclerotic lesions. Coronary artery occlusion produced considerable myocardial ischaemia and later infarction following myocardial remodelling. The experimental models evaluated in these studies will enable further studies concerning disease mechanisms, new radiopharmaceuticals and interventions in coronary artery disease and heart failure.

Safety and outcome of coronary interventions with special reference to anticoagulation and stent type

University of Turku, Faculty of Medicine, Department of Cardiology and Cardiovascular Medicine, Doctoral Programme of Clinical Investigation, Heart Center, Turku University Hospital, Turku, Finland Division of Internal Medicine, Department of Cardiology, Seinäjoki Central Hospital, Seinäjoki, Finland Heart Center, Satakunta Central Hospital, Pori, Finland Annales Universitatis Turkuensis Painosalama Oy, Turku, Finland 2015 Antithrombotic therapy during and after coronary procedures always entails the challenging establishment of a balance between bleeding and thrombotic complications. It has been generally recommended to patients on long-term warfarin therapy to discontinue warfarin a few days prior to elective coronary angiography or intervention to prevent bleeding complications. Bridging therapy with heparin is recommended for patients at an increased risk of thromboembolism who require the interruption of anticoagulation for elective surgery or an invasive procedure. In study I, consecutive patients on warfarin therapy referred for diagnostic coronary angiography were compared to control patients with a similar disease presentation without warfarin. The strategy of performing coronary angiography during uninterrupted therapeutic warfarin anticoagulation appeared to be a relatively safe alternative to bridging therapy, if the international normalized ratio level was not on a supratherapeutic level. In-stent restenosis remains an important reason for failure of long-term success after a percutaneous coronary intervention (PCI). Drug-eluting stents (DES) reduce the problem of restenosis inherent to bare metal stents (BMS). However, a longer delay in arterial healing may extend the risk of stent thrombosis (ST) far beyond 30 days after the DES implantation. Early discontinuation of antiplatelet therapy has been the most important predisposing factor for ST. In study II, patients on long-term oral anticoagulant (OAC) underwent DES or BMS stenting with a median of 3.5 years’follow-up. The selective use of DESs with a short triple therapy seemed to be safe in OAC patients, since late STs were rare even without long clopidogrel treatment. Major bleeding and cardiac events were common in this patient group irrespective of stent type. In order to help to predict the bleeding risk in patients on OAC, several different bleeding risk scorings have been developed. Risk scoring systems have also been used also in the setting of patients undergoing a PCI. In study III, the predictive value of an outpatient bleeding risk index (OBRI) to identify patients at high risk of bleeding was analysed. The bleeding risk seemed not to modify periprocedural or long-term treatment choices in patients on OAC after a percutaneous coronary intervention. Patients with a high OBRI often had major bleeding episodes, and the OBRI may be suitable for risk evaluation in this patient group. Optical coherence tomography (OCT) is a novel technology for imaging intravascular coronary arteries. OCT is a light-based imaging modality that enables a 12–18 µm tissue axial resolution to visualize plaques in the vessel, possible dissections and thrombi as well as, stent strut appositions and coverage, and to measure the vessel lumen and lesions. In study IV, 30 days after titanium-nitride-oxide (TITANOX)-coated stent implantation, the binary stent strut coverage was satisfactory and the prevalence of malapposed struts was low as evaluated by OCT. Long-term clinical events in patients treated with (TITANOX)-coated bio-active stents (BAS) and paclitaxel-eluting stents (PES) in routine clinical practice were examined in study V. At the 3-year follow-up, BAS resulted in better long-term outcome when compared with PES with an infrequent need for target vessel revascularization. Keywords: anticoagulation, restenosis, thrombosis, bleeding, optical coherence tomography, titanium

Model of Big Data Failure: Review of Information System Failure

In the new age of information technology, big data has grown to be the prominent phenomena. As information technology evolves, organizations have begun to adopt big data and apply it as a tool throughout their decision-making processes. Research on big data has grown in the past years however mainly from a technical stance and there is a void in business related cases. This thesis fills the gap in the research by addressing big data challenges and failure cases. The Technology-Organization-Environment framework was applied to carry out a literature review on trends in Business Intelligence and Knowledge management information system failures. A review of extant literature was carried out using a collection of leading information system journals. Academic papers and articles on big data, Business Intelligence, Decision Support Systems, and Knowledge Management systems were studied from both failure and success aspects in order to build a model for big data failure. I continue and delineate the contribution of the Information System failure literature as it is the principal dynamics behind technology-organization-environment framework. The gathered literature was then categorised and a failure model was developed from the identified critical failure points. The failure constructs were further categorized, defined, and tabulated into a contextual diagram. The developed model and table were designed to act as comprehensive starting point and as general guidance for academics, CIOs or other system stakeholders to facilitate decision-making in big data adoption process by measuring the effect of technological, organizational, and environmental variables with perceived benefits, dissatisfaction and discontinued use.

Model of Big Data Failure: Review of Information System Failure

In the new age of information technology, big data has grown to be the prominent phenomena. As information technology evolves, organizations have begun to adopt big data and apply it as a tool throughout their decision-making processes. Research on big data has grown in the past years however mainly from a technical stance and there is a void in business related cases. This thesis fills the gap in the research by addressing big data challenges and failure cases. The Technology-Organization-Environment framework was applied to carry out a literature review on trends in Business Intelligence and Knowledge management information system failures. A review of extant literature was carried out using a collection of leading information system journals. Academic papers and articles on big data, Business Intelligence, Decision Support Systems, and Knowledge Management systems were studied from both failure and success aspects in order to build a model for big data failure. I continue and delineate the contribution of the Information System failure literature as it is the principal dynamics behind technology-organization-environment framework. The gathered literature was then categorised and a failure model was developed from the identified critical failure points. The failure constructs were further categorized, defined, and tabulated into a contextual diagram. The developed model and table were designed to act as comprehensive starting point and as general guidance for academics, CIOs or other system stakeholders to facilitate decision-making in big data adoption process by measuring the effect of technological, organizational, and environmental variables with perceived benefits, dissatisfaction and discontinued use.

Acquisition Failure: The case of a multinational enterprise from an emerging market failing in Indonesia.

The escalation in the number of mergers and acquisition transactions involving emerging market firms is a relatively recent phenomenon; as a consequence academic research in such topic is rather limited. The purpose of this research study was to discuss the possible reasons that led the acquisition failure of an emerging multinational firm and an Indonesian player. Extensive theoretical research was performed and it had been achieved, based on this, the finding of a framework that facilitated to understand the way in which the concepts of cultural distances and relate liabilities of foreignness in the process of acquisitions of foreign companies in emerging markets. The theoretical background collects literature related to acquisitions, models of cultural studies between nations and liabilities of foreignness. It has been generated a variety of frameworks that aid to understand the way that the institutional distance and cultural factors together with the concept of liabilities of foreignness can affect the process of market entry of an emerging multinational company to the extent that the best way to stop losing money is to abandon the project. The empirical research consisted of selective semi-structured interviews and an extensive research in available public data on the chosen study case of this research. There were several factors that were identified as the cause of the failure in the market entry of a Mexican multinational firm in Indonesia. The weakness shown by the local government authorities was used by the local community leaders who rioted because of discomfort. These groups were the ones who made the government submit to the extent that the agreements reached at the beginning of the deal were either canceled or modified in a way that favored always the local community. The contributions of this study fall into the knowledge field of emerging multinational firms and market entry process.

Failure modes of passive decay heat removing safety systems of modern nuclear power plants

The purpose of this master’s thesis is to gain an understanding of passive safety systems’ role in modern nuclear reactors projects and to research the failure modes of passive decay heat removal safety systems which use phenomenon of natural circulation. Another purpose is to identify the main physical principles and phenomena which are used to establish passive safety tools in nuclear power plants. The work describes passive decay heat removal systems used in AES-2006 project and focuses on the behavior of SPOT PG system. The descriptions of the main large-scale research facilities of the passive safety systems of the AES-2006 power plant are also included. The work contains the calculations of the SPOT PG system, which was modeled with thermal-hydraulic system code TRACE. The dimensions of the calculation model are set according to the dimensions of the real SPOT PG system. In these calculations three parameters are investigated as a function of decay heat power: the pressure of the system, the natural circulation mass flow rate around the closed loop, and the level of liquid in the downcomer. The purpose of the calculations is to test the ability of the SPOT PG system to remove the decay heat from the primary side of the nuclear reactor in case of failure of one, two, or three loops out of four. The calculations show that three loops of the SPOT PG system have adequate capacity to provide the necessary level of safety. In conclusion, the work supports the view that passive systems could be widely spread in modern nuclear projects.