The effectiveness of short-term literacy skills intervention on children at risk of reading and writing difficulties in Tanzania : a study of grade one children with dynamic assessment approach

The aim of the study was to create and evaluate an intervention programme for Tanzanian children from a low-income area who are at risk of reading and writing difficulties. The learning difficulties, including reading and writing difficulties, are likely to be behind many of the common school problems in Tanzania, but they are not well understood, and research is needed. The design of the study included an identification and intervention phase with follow-up. A group based dynamic assessment approach was used in identifying children at risk of difficulties in reading and writing. The same approach was used in the intervention. The study was a randomized experiment with one experimental and two control groups. For the experimental and the control groups, a total of 96 (46 girls and 50 boys) children from grade one were screened out of 301 children from two schools in a low income urban area of Dar-es-Salaam. One third of the children, the experimental group, participated in an intensive training programme in literacy skills for five weeks, six hours per week, aimed at promoting reading and writing ability, while the children in the control groups had a mathematics and art programme. Follow-up was performed five months after the intervention. The intervention programme and the tests were based on the Zambian BASAT (Basic Skill Assessment Tool, Ketonen & Mulenga, 2003), but the content was drawn from the Kiswahili school curriculum in Tanzania. The main components of the training and testing programme were the same, only differing in content. The training process was different from traditional training in Tanzanian schools in that principles of teaching and training in dynamic assessment were followed. Feedback was the cornerstone of the training and the focus was on supporting the children in exploring knowledge and strategies in performing the tasks. The experimental group improved significantly more (p = .000) than the control groups during the intervention from pre-test to follow-up (repeated measures ANOVA). No differences between the control groups were noticed. The effect was significant on all the measures: phonological awareness, reading skills, writing skills and overall literacy skills. A transfer effect on school marks in Kiswahili and English was found. Following a discussion of the results, suggestions for further research and adaptation of the programme are presented.

Timing of Capacity Change: Models for Capital Intensive Industry

The suitable timing of capacity investments is a remarkable issue especially in capital intensive industries. Despite its importance, fairly few studies have been published on the topic. In the present study models for the timing of capacity change in capital intensive industry are developed. The study considers mainly the optimal timing of single capacity changes. The review of earlier research describes connections between cost, capacity and timing literature, and empirical examples are used to describe the starting point of the study and to test the developed models. The study includes four models, which describe the timing question from different perspectives. The first model, which minimizes unit costs, has been built for capacity expansion and replacement situations. It is shown that the optimal timing of an investment can be presented with the capacity and cost advantage ratios. After the unit cost minimization model the view is extended to the direction of profit maximization. The second model states that early investments are preferable if the change of fixed costs is small compared to the change of the contribution margin. The third model is a numerical discounted cash flow model, which emphasizes the roles of start-up time, capacity utilization rate and value of waiting as drivers of the profitable timing of a project. The last model expands the view from project level to company level and connects the flexibility of assets and cost structures to the timing problem. The main results of the research are the solutions of the models and analysis or simulations done with the models. The relevance and applicability of the results are verified by evaluating the logic of the models and by numerical cases.

OSAAMISINTENSIIVISET LIIKE-ELÄMÄN PALVELUT, Osaavan työvoiman saatavuuden turvaaminen Case: Yritysten ja työhallinnon yhteistyö työvoimapoliittisen koulutuksen suunnittelussa

Työn tavoitteena on selvittää kuinka yritykset osallistuvat työvoimakoulutuksen suunnitteluun. Kyselyn avulla on selvitetty suunnitteluprosessia, johon osallistui osa TE-keskuksista ja työvoimatoimistoista. Kirjallisuustutkimuksessa tarkastellaan osaamisintensiivisiä liike-elämän palveluita, tiedon hallintaa, miljöön analysointia, liiketoimintasuhteita sekä verkostoitumista. Tutkimuksen empiirisessä osassa tarkastellaan työhallinnon tavoitteita ja kyselyn avulla selvitettyjätoimintatapoja yritysten osallistumisesta työvoimakoulutuksen suunnitteluun. Tuloksena saatiin runsaasti yhteistyötapoja yritysten kanssa, mutta Lappeenrannan työvoimatoimiston näkökulmasta ei mitään uutta noussut esille. Suoran yhteistyön esteenä on edelleen yrityksien sekä myös työvoimahallinnon motivaationpuute.

Modeling competencies and capabilities in knowledge intensive business environment

Tämän diplomityön päämääränä oli tutkia Perloksen teknologiaosaamisia. Perloksen tavoitteena on tulevaisuudessa yhdistää ja soveltaa uusia teknologioita ja älykkäitä materiaaleja muovimekaniikkaan.Ideana oli mallintaa Perloksen osaamisia ja osaamisgapeja ottaen huomioon heidän tulevaisuuden visionsa. Projektituotteena osaamisten mallintamisessa oli Perlos Healthcaren asiakkaan analysoiva mittauslaite. Tutkimuksen arvo on huomattava sillä tunnistamalla osaamisensa ja kyvykkyytensä yritys pystyy luomaan paremman tarjooman vastatessaan koko ajan kasvaviin asiakasvaatimuksiin. Tutkimus on osa TEKESin rahoittamaa LIIMA -projektia. Työn ensimmäisessä osassa esitellään osaamiseen ja partneroitumiseen liittyviä teorioita. Osaamisten mallintaminen tehtiin Excel -pohjaisella työkalulla. Se sisältää projektituotteeseen liittyen osaamisriippuvuuksien mallintamisen ja gap -analyysin. Yhtenä tutkimusmetodina käytettiin haastattelututkimusta. Työ ja sen tulokset antavat operatiivista hyötyä teknologioiden ja markkinoiden välisessä kentässä.

Business competence and training needs in Finnish companies operating in the Leningrad Region

Tässä pro gradu -työssä tutkitaan Leningradin alueella, Venäjällä, toimivien suomalaisyritysten liiketoimintaosaamisen koulutustarpeita. Tavoitteena on ollut tutkia, millaisia yritysten koulutustarpeet ovat, sekä lisäksi selvittää yleisemmällä tasolla, miten liiketoimintaosaaminen määritellään. Useat tutkimusta varten haastatellut johtajat pitävät liiketoimintaosaamista erityisesti markkinoilla toimimiseen liittyvänä osaamisena. Myös johtaminen, sekä tuotteet ja teknologia nähdään liiketoimintaosaamisen tärkeinä osina. Yrityksillä on koulutustarpeita seuraavilla alueilla: johtaminen; myynti, markkinat ja asiakkaat; yrityksen sisäinen yhteistyö; kielet, sekä juridiikka ja laskentatoimi. Haastateltavien mukaan markkinoiden nopea kehitys sekä yrityksen kasvu luovat yrityksille koulutustarpeita. Yllättäen myös Venäjän koulutusjärjestelmää itsessään pidetään koulutustarpeiden syynä. Tutkimuksessa mukana olleiden yritysten koulutuskäytännöt ovat keskenään melko erilaisia: koulutusbudjetti, koulutuspäivien määrä ja koulutusorganisaation valintakriteerit vaihtelevatyrityksestä riippuen. Joka tapauksessa yleisin koulutusmuoto näyttää olevan yrityksen sisäinen koulutus. Monet haastateltavat painottavat suuresti uusien työntekijöiden kouluttamista. Selvästikin rekrytointi ja uusien työntekijöiden koulutus vievät suuren osan tutkimusta varten haastateltujen johtajien ajasta. Tärkeä huomio koulutusmarkkinoihin liittyen on se, että lyhyiden, kaikille avoimien koulutusten kohdalla markkinat ovat Pietarissa täynnä. Suurimpana uhkana nähdään alalla vallitseva kouluttajapula.

On the innovation capacity of technologyrelated knowledge-intensive business services. A case study of the technology and engineering consulting (TEC) sector in Singapore

Even though the research on innovation in services has expanded remarkably especially during the past two decades, there is still a need to increase understanding on the special characteristics of service innovation. In addition to studying innovation in service companies and industries, research has also recently focused more on services in innovation, as especially the significance of so-called knowledge intensive business services (KIBS) for the competitive edge of their clients, othercompanies, regions and even nations has been proved in several previous studies. This study focuses on studying technology-based KIBS firms, and technology andengineering consulting (TEC) sector in particular. These firms have multiple roles in innovation systems, and thus, there is also a need for in-depth studies that increase knowledge about the types and dimensions of service innovations as well as underlying mechanisms and procedures which make the innovations successful. The main aim of this study is to generate new knowledge in the fragmented research field of service innovation management by recognizing the different typesof innovations in TEC services and some of the enablers of and barriers to innovation capacity in the field, especially from the knowledge management perspective. The study also aims to shed light on some of the existing routines and new constructions needed for enhancing service innovation and knowledge processing activities in KIBS companies of the TEC sector. The main samples of data in this research include literature reviews and public data sources, and a qualitative research approach with exploratory case studies conducted with the help of the interviews at technology consulting companies in Singapore in 2006. These complement the qualitative interview data gathered previously in Finland during a larger research project in the years 2004-2005. The data is also supplemented by a survey conducted in Singapore. The respondents for the survey by Tan (2007) were technology consulting companies who operate in the Singapore region. The purpose ofthe quantitative part of the study was to validate and further examine specificaspects such as the influence of knowledge management activities on innovativeness and different types of service innovations, in which the technology consultancies are involved. Singapore is known as a South-east Asian knowledge hub and is thus a significant research area where several multinational knowledge-intensive service firms operate. Typically, the service innovations identified in the studied TEC firms were formed by several dimensions of innovations. In addition to technological aspects, innovations were, for instance, related to new client interfaces and service delivery processes. The main enablers of and barriers to innovation seem to be partly similar in Singaporean firms as compared to the earlier study of Finnish TEC firms. Empirical studies also brought forth the significance of various sources of knowledge and knowledge processing activities as themain driving forces of service innovation in technology-related KIBS firms. A framework was also developed to study the effect of knowledge processing capabilities as well as some moderators on the innovativeness of TEC firms. Especially efficient knowledge acquisition and environmental dynamism seem to influence the innovativeness of TEC firms positively. The results of the study also contributeto the present service innovation literature by focusing more on 'innovation within KIBs' rather than 'innovation through KIBS', which has been the typical viewpoint stressed in the previous literature. Additionally, the study provides several possibilities for further research.

On the differential evolution algorithm and its appliation to training radial basis function networks

The parameter setting of a differential evolution algorithm must meet several requirements: efficiency, effectiveness, and reliability. Problems vary. The solution of a particular problem can be represented in different ways. An algorithm most efficient in dealing with a particular representation may be less efficient in dealing with other representations. The development of differential evolution-based methods contributes substantially to research on evolutionary computing and global optimization in general. The objective of this study is to investigatethe differential evolution algorithm, the intelligent adjustment of its controlparameters, and its application. In the thesis, the differential evolution algorithm is first examined using different parameter settings and test functions. Fuzzy control is then employed to make control parameters adaptive based on an optimization process and expert knowledge. The developed algorithms are applied to training radial basis function networks for function approximation with possible variables including centers, widths, and weights of basis functions and both having control parameters kept fixed and adjusted by fuzzy controller. After the influence of control variables on the performance of the differential evolution algorithm was explored, an adaptive version of the differential evolution algorithm was developed and the differential evolution-based radial basis function network training approaches were proposed. Experimental results showed that the performance of the differential evolution algorithm is sensitive to parameter setting, and the best setting was found to be problem dependent. The fuzzy adaptive differential evolution algorithm releases the user load of parameter setting and performs better than those using all fixedparameters. Differential evolution-based approaches are effective for training Gaussian radial basis function networks.

Engendering Group Support Based Foresight for Capital Intensive Manufacturing Industries - Case Paper and Steel Industry Scenarios by 2018

In recent times of global turmoil, the need for uncertainty management has become ever momentous. The need for enhanced foresight especially concerns capital-intensive industries, which need to commit their resources and assets with long-term planning horizons. Scenario planning has been acknowledged to have many virtues - and limitations - concerning the mapping of the future and illustrating the alternative development paths. The present study has been initiated to address both the need of improved foresight in two capital-intensive industries, i.e. the paper and steel industries and the imperfections in the current scenario practice. The research problem has been approached by engendering a problem-solving vehicle, which combines, e.g. elements of generic scenario process, face-to-face group support methods, deductive scenario reasoning and causal mapping into a fully integrated scenario process. The process, called the SAGES scenario framework, has been empirically tested by creating alternative futures for two capital-intensive industries, i.e. the paper and steel industries. Three scenarios for each industry have been engendered together with the identification of the key megatrends, the most important foreign investment determinants, key future drivers and leading indicators for the materialisation of the scenarios. The empirical results revealed a two-fold outlook for the paper industry, while the steel industry future was seen as much more positive. The research found support for utilising group support systems in scenario and strategic planning context with some limitations. Key perceived benefits include high time-efficiency, productivity and lower resource-intensiveness. Group support also seems to enhance participant satisfaction, encourage innovative thinking and provide the users with personalised qualitative scenarios.

Evaluating End-User Training Effectiveness in ERP System Implementation

Today’s business world demands more and more internal and external integration and transparency among companies at all fields. Integrated ERP (enterprise resource planning) systems offer a possibility to improve business practices and procedures by providing a unified view on the business including all functions and departments. Due to the obvious benefits, the popularity of integrated ERP systems keeps growing. The implementation of ERP systems has however proven risky. The implementation projects tend to be long, extensive, and costly – and often they end up in a failure. Due to the significant task and role changes ERP implementation brings to almost everybody in the company, training has been identified as one of the most critical success factors of an ERP implementation. To ensure that the training is conducted in the most effective and successful manner, the training outcomes should be evaluated. So far, training evaluation has however gained only limited attention at most companies investing in different training programs. Uponor corporation has initiated a large ERP implementation and process harmonization program in 2004. Thousands of end-users have been trained during this project so far, and the work still continues until the project is completed in 2010. In this thesis, the evaluation of end-user training in Uponor’s ERP program is brought further from the current state of performing the basic participant satisfaction survey in the end of each class. The results show that in order to reach reliable training effectiveness evaluation results, not only the reaction towards training but also transfer of skills and attitudes and the final results of the training program should be evaluated.

Success of service-intensive manufacturing firms - resource-based view

The main objective of this study is to examine the relationships between resources, competitive advantage and firm success. The study focuses, on one hand, on the financial performance of service-intensive manufac-turing firms against competitors with a lower service intensity and, on the other hand, on the resources as drivers for competitive advantage and success. The purpose of the theoretical part is to link the study in the field of the strategy research. The empirical part of the study is based on the quantitative analyses of the survey data collected from 50 major suppliers of industrial machinery and transportation equipment in Europe and North America. Results indicate that service-intensive manufacturing firms have performed better and their performance has been more stable vis-à-vis their peers. The main resources that differentiate service-intensive manufacturing firms from their non-service intensive competitors are service strategy and service-oriented top management. The analyses on the VRIO resources produced only a limited amount of information and solely service-centred culture appeared to be a rent generating resource.

Development of Calculation Procedures for Wastewater Treatment Technologies for a Training System

Efficient designs and operations of water and wastewater treatment systems are largely based on mathematical calculations. This even applies to training in the treatment systems. Therefore, it is necessary that calculation procedures are developed and computerised a priori for such applications to ensure effectiveness. This work was aimed at developing calculation procedures for gas stripping, depth filtration, ion exchange, chemical precipitation, and ozonation wastewater treatment technologies to include them in ED-WAVE, a portable computer based tool used in design, operations and training in wastewater treatment. The work involved a comprehensive online and offline study of research work and literature, and application of practical case studies to generate ED-WAVE compatible representations of the treatment technologies which were then uploaded into the tool.

Training system for conceptual design and evaluation for wastewater treatment

Rising population, rapid urbanisation and growing industrialisation have severely stressed water quality and its availability in Malawi. In addition, financial and institutional problems and the expanding agro industry have aggravated this problem. The situation is worsened by depleting water resources and pollution from untreated sewage and industrial effluent. The increasing scarcity of clean water calls for the need for appropriate management of available water resources. There is also demand for a training system for conceptual design and evaluation for wastewater treatment in order to build the capacity for technical service providers and environmental practitioners in the country. It is predicted that Malawi will face a water stress situation by 2025. In the city of Blantyre, this situation is aggravated by the serious pollution threat from the grossly inadequate sewage treatment capacity. This capacity is only 23.5% of the wastewater being generated presently. In addition, limited or non-existent industrial effluent treatment has contributed to the severe water quality degradation. This situation poses a threat to the ecologically fragile and sensitive receiving water courses within the city. This water is used for domestic purposes further downstream. This manuscript outlines the legal and policy framework for wastewater treatment in Malawi. The manuscript also evaluates the existing wastewater treatment systems in Blantyre. This evaluation aims at determining if the effluent levels at the municipal plants conform to existing standards and guidelines and other associated policy and regulatory frameworks. The raw material at all the three municipal plants is sewage. The typical wastewater parameters are Biochemical Oxygen Demand (BOD5), Chemical Oxygen Demand (COD), and Total Suspended Solids (TSS). The treatment target is BOD5, COD, and TSS reduction. Typical wastewater parameters at the wastewater treatment plant at MDW&S textile and garments factory are BOD5 and COD. The treatment target is to reduce BOD5 and COD. The manuscript further evaluates a design approach of the three municipal wastewater treatment plants in the city and the wastewater treatment plant at Mapeto David Whitehead & Sons (MDW&S) textile and garments factory. This evaluation utilises case-based design and case-based reasoning principles in the ED-WAVE tool to determine if there is potential for the tool in Blantyre. The manuscript finally evaluates the technology selection process for appropriate wastewater treatment systems for the city of Blantyre. The criteria for selection of appropriate wastewater treatment systems are discussed. Decision support tools and the decision tree making process for technology selection are also discussed. Based on the treatment targets and design criteria at the eight cases evaluated in this manuscript in reference to similar cases in the ED-WAVE tool, this work confirms the practical use of case-based design and case-based reasoning principles in the ED-WAVE tool in the design and evaluation of wastewater treatment 6 systems in sub-Sahara Africa, using Blantyre, Malawi, as the case study area. After encountering a new situation, already collected decision scenarios (cases) are invoked and modified in order to arrive at a particular design alternative. What is necessary, however, is to appropriately modify the case arrived at through the Case Study Manager in order to come up with a design appropriate to the local situation taking into account technical, socio-economic and environmental aspects. This work provides a training system for conceptual design and evaluation for wastewater treatment.