Social media and public libraries : exploring information activities of library professionals and users

Social media has become a part of many people’s everyday lives. In the library field the adoption of social media has been widespread and discussions of the development of “Library 2.0” began at an early stage. The aim with this thesis is to study the interface between public libraries, social media, and users, focusing on information activities. The main research question is: How is the interface between public libraries and social media perceived and acted upon by its main stakeholders (library professionals and users)? The background of Library 2.0 is strongly associated with the development of the Web and social media, as well as with the public libraries and their user-centered and information technological development. The theoretical framework builds on the research within the area of Library and Information Science concerning information behavior, information practice, and information activities. Earlier research on social media and public libraries is also highlighted in this thesis. The methods survey and content analysis were applied to map the interface between social media and public libraries. A questionnaire was handed out to the users and another questionnaire was sent out to the library professionals. The results were statistically analyzed. In the content analysis public library Facebook pages were studied. All the empirical investigations were conducted in the area of Finland Proper. An integrated analysis of the results deepens the understanding of the key elements of the social media and public library context. These elements are interactivity, information activities, perceptions, and stakeholders. In this context seven information activities were distinguished: reading, seeking, creating, communicating, informing, mediating, and contributing. This thesis contributes to develop the research concerning information activities and draws a realistic picture of the challenges and opportunities in the social media and public library context. It also contributes with knowledge on library professionals and library users, and the existing differences in their perceptions of the interface between libraries and social media.

DFMA- Analysis and Aspects of Applying Internet Based Collaborative Design for Axial Eccentric Oil-Pump Design

The integrated system of design for manufacturing and assembly (DFMA) and internet based collaborative design are presented to support product design, manufacturing process, and assembly planning for axial eccentric oil-pump design. The presented system manages and schedules group oriented collaborative activities. The design guidelines of internet based collaborative design & DFMA are expressed. The components and the manufacturing stages of axial eccentric oil-pump are expressed in detail. The file formats of the presented system include the data types of collaborative design of the product, assembly design, assembly planning and assembly system design. Product design and assembly planning can be operated synchronously and intelligently and they are integrated under the condition of internet based collaborative design and DFMA. The technologies of collaborative modelling, collaborative manufacturing, and internet based collaborative assembly for the specific pump construction are developed. A seven-security level is presented to ensure the security of the internet based collaborative design system.

Deregulation of Railroads and Future Development Scenarios in Europe - Literature Analysis of Privatization Process Taken Place in US, UK and Sweden

Euroopan unionissa päätettiin jo yli vuosikymmen sitten, että rautatieliiketoiminta vapautetaan kilpailulle. Iso-Britanniasta olimäärä tulla esimerkkivaltio tämän prosessin käyttöönotossa. Pääideana oli säännöstelyn keventäminen, jolloin omistuspohja toimialalla laajenee ja rautateiden infrastruktuuri sekä toiminta parantuvat. Infrastruktuuri on määrä olla yhden organisaation hallinnassa ja raiteiden käyttöoikeus on kaikilla lupaehdot täyttävillä operaattoreilla, jotka kilpailevat keskenään matkustajista ja tavararahdeista. Kuitenkin Yhdysvalloissa ja eräissä Latinalaisen Amerikan maissa kilpailu on vapautettu siten, että rautatieyritys omistaa raideinfrastruktuurin, junat, tavarankuljetus- sekä matkustajavaunut. Iso-Britannian yksityistämistä pidettiin aluksi isonaepäonnistumisena: nopealla aikataululla sovellettiin jäykkiä transaktioperusteisia ulkoistamisstrategioita infrastruktuurin kunnossapitoon, jotka lopulta johtivat junien jatkuviin myöhästymisiin ja muutamaan tuhoisaan onnettomuuteen. Liiketoiminnallisessa mielessäkään ei oikein onnistuttu: infrastruktuurista vastaava yritys jouduttiin listaamaan pois Lontoon pörssistä, ja hallituksen oli pakko luoda tukipaketti pahasti velkaantuneen, vain marginaalisien investointien kohteena olleen yrityksen toimintaa varten (vaikka kapasiteettitarvetta oli markkinoilla). Myös rautatieoperaattorit olivat taloudellisessa ahdingossa ja vain määrätietoisten hallituksen laatimien pelastuspakettien avulla ala nousi syvimmästä kriisistään. Tästä huolimatta näiden negatiivisten sivuvaikutusten ohella koko ala pystyi kasvattamaan kysyntää, niin matkustaja- kuin rahtiliikenteenkin osalta. Vähenevän kysynnän trendi, joka alkoi 1970-luvulla, otti käännöksen parempaan. Toinen eurooppalaismaa, jolla on pitkät kokemukset yksityistämisestä, on Ruotsi. Tämä maatapaus on melko konservatiivinen verrattuna tilanteeseen edellisessä; vain rajattu määrä reittejä on avattu kilpailulle ja sopimukset tehdään kerralla pitkäksi aikaa eteenpäin. Ruotsin säännöstelyn purku osoittautui menestykseksi, koska tuottavuus onollut vakaassa kasvussa ja rautateiden markkinaosuus erityisesti matkustajapuolella on noussut merkittävästi, verrattuna muihin kuljetusmuotoihin. Kuitenkin kilpailua on käytännössä vähän tässä maassa ja parempiatuloksia on lupa odottaa, kun vain säännöstelyn purkaminen jatkuu. Viimeinen tutkimuksemme kohteena oleva maa on Yhdysvallat, joka alistutti rautatiet kilpailulle jo 1980-luvun alussa, käyttäen jo edellä mainittua vertikaalista integraatiota; tämä valinta on taas johtanut hyvin erilaisiin tuloksiin. Vaihtoehtoinen rakenteellinen uudistustapa on suosinut rahtivirtoja matkustajiin nähden, ja lopputuloksena tämä tapaus synnytti yrityksiä huolehtimaan toista näistä kahdesta pääasiakasryhmästä. Viimeaikaiset tulokset tästä yksityistämisprosessista ovat olleet hyviä: jäljellejääneiden yritysten voitot ovat kasvaneet, osinkoja ollaan kyetty jakamaan ja osakkeiden arvostus on noussut. Tässä tutkimusraportissa yritämme kolmen maatapauksen kautta esittää, miten yksityistämisprosessi tulee vaikuttamaan Euroopassa, kun kilpailu rautateillä vapautuu. Me käymmeläpi, mikä näistä kolmesta maaesimerkistä on kaikkein todennäköisin jaesitämme ehdotuksia siihen, miten valtiot voisivat välttää ei-haluttuja sivuvaikutuksia. Kolme maaesimerkkiä, ja lopuksi esitetty lyhyt tilastollinen analyysi osoittavat, että rautateillä on tulevaisuuden potentiaalia Euroopassa, ja kilpailun vapauttaminen on avain tämän potentiaalin realisointiin.

R&D Performance Analysis: Case Studies on the Challenges and Promotion of the Evaluation and Measurement of R&D

Due to the intense international competition, demanding, and sophisticated customers, and diverse transforming technological change, organizations need to renew their products and services by allocating resources on research and development (R&D). Managing R&D is complex, but vital for many organizations to survive in the dynamic, turbulent environment. Thus, the increased interest among decision-makers towards finding the right performance measures for R&D is understandable. The measures or evaluation methods of R&D performance can be utilized for multiple purposes; for strategic control, for justifying the existence of R&D, for providing information and improving activities, as well as for the purposes of motivating and benchmarking. The earlier research in the field of R&D performance analysis has generally focused on either the activities and considerable factors and dimensions - e.g. strategic perspectives, purposes of measurement, levels of analysis, types of R&D or phases of R&D process - prior to the selection of R&Dperformance measures, or on proposed principles or actual implementation of theselection or design processes of R&D performance measures or measurement systems. This study aims at integrating the consideration of essential factors anddimensions of R&D performance analysis to developed selection processes of R&D measures, which have been applied in real-world organizations. The earlier models for corporate performance measurement that can be found in the literature, are to some extent adaptable also to the development of measurement systemsand selecting the measures in R&D activities. However, it is necessary to emphasize the special aspects related to the measurement of R&D performance in a way that make the development of new approaches for especially R&D performance measure selection necessary: First, the special characteristics of R&D - such as the long time lag between the inputs and outcomes, as well as the overall complexity and difficult coordination of activities - influence the R&D performance analysis problems, such as the need for more systematic, objective, balanced and multi-dimensional approaches for R&D measure selection, as well as the incompatibility of R&D measurement systems to other corporate measurement systems and vice versa. Secondly, the above-mentioned characteristics and challenges bring forth the significance of the influencing factors and dimensions that need to be recognized in order to derive the selection criteria for measures and choose the right R&D metrics, which is the most crucial step in the measurement system development process. The main purpose of this study is to support the management and control of the research and development activities of organizations by increasing the understanding of R&D performance analysis, clarifying the main factors related to the selection of R&D measures and by providing novel types of approaches and methods for systematizing the whole strategy- and business-based selection and development process of R&D indicators.The final aim of the research is to support the management in their decision making of R&D with suitable, systematically chosen measures or evaluation methods of R&D performance. Thus, the emphasis in most sub-areas of the present research has been on the promotion of the selection and development process of R&D indicators with the help of the different tools and decision support systems, i.e. the research has normative features through providing guidelines by novel types of approaches. The gathering of data and conducting case studies in metal and electronic industry companies, in the information and communications technology (ICT) sector, and in non-profit organizations helped us to formulate a comprehensive picture of the main challenges of R&D performance analysis in different organizations, which is essential, as recognition of the most importantproblem areas is a very crucial element in the constructive research approach utilized in this study. Multiple practical benefits regarding the defined problemareas could be found in the various constructed approaches presented in this dissertation: 1) the selection of R&D measures became more systematic when compared to the empirical analysis, as it was common that there were no systematic approaches utilized in the studied organizations earlier; 2) the evaluation methods or measures of R&D chosen with the help of the developed approaches can be more directly utilized in the decision-making, because of the thorough consideration of the purpose of measurement, as well as other dimensions of measurement; 3) more balance to the set of R&D measures was desired and gained throughthe holistic approaches to the selection processes; and 4) more objectivity wasgained through organizing the selection processes, as the earlier systems were considered subjective in many organizations. Scientifically, this dissertation aims to make a contribution to the present body of knowledge of R&D performance analysis by facilitating dealing with the versatility and challenges of R&D performance analysis, as well as the factors and dimensions influencing the selection of R&D performance measures, and by integrating these aspects to the developed novel types of approaches, methods and tools in the selection processes of R&D measures, applied in real-world organizations. In the whole research, facilitation of dealing with the versatility and challenges in R&D performance analysis, as well as the factors and dimensions influencing the R&D performance measure selection are strongly integrated with the constructed approaches. Thus, the research meets the above-mentioned purposes and objectives of the dissertation from the scientific as well as from the practical point of view.

Disc Filter External Models in an Integrated Simulation Environment

Työssä tutkittiin kiekkosuodattimeen liittyviä ulkoisia simulointimalleja integroidussa simulointiympäristössä. Työn tarkoituksena oli parantaa olemassa olevaa mekanistista kiekkosuodatinmallia. Malli laadittiin dynaamiseen paperiteollisuuden tarpeisiin tehtyyn simulaattoriin (APMS), jossa olevaan alkuperäiseen mekanistiseen malliin tehtiin ulkoinen lisämalli, joka käyttää hyväkseen kiekkosuodatinvalmistajan mittaustuloksia. Laitetiedon saatavuutta suodattimien käyttäjille parannettiin luomalla Internetissä sijaitsevalle palvelimelle kiekkosuodattimen laitetietomäärittelyt. Suodatinvalmistaja voi palvella asiakkaitaan viemällä laitetiedot palvelimelle ja yhdistämällä laitetiedon simulointimalliin. Tämä on mahdollista Internetin ylitse käytettävän integroidun simulointiympäristön avulla, jonka on tarkoitus kokonaisvaltaisesti yhdistää simulointi ja prosessisuunnittelu. Suunnittelijalle tarjotaan työkalut, joilla dynaaminen simulointi, tasesimulointi ja kaavioiden piirtäminen onnistuu prosessilaitetiedon ollessa saatavilla. Nämä työkalut on tarkoitus toteuttaa projektissa nimeltä Galleria, jossa luodaan prosessimalli- ja laitetietopalvelin Internetiin. Gallerian käyttöliittymän avulla prosessisuunnittelija voi käyttää erilaisia simulointiohjelmistoja ja niihin luotuja valmiita malleja, sekä saada käsiinsä ajan tasalla olevaa laitetietoa. Ulkoinen kiekkosuodatinmalli laskee suodosvirtaamat ja suodosten pitoisuudet likaiselle, kirkkaalle ja superkirkkaalle suodokselle. Mallin syöttöparametrit ovat kiekkojen pyörimisnopeus, sisään tulevan syötön pitoisuus, suotautuvuus (freeness) ja säätöparametri, jolla säädetään likaisen ja kirkkaan suodoksen keskinäinen suhde. Suotautuvuus kertoo mistä massasta on kyse. Mitä suurempi suotautuvuus on, sitä paremmin massa suodattuu ja sitä puhtaampia suodokset yleensä ovat. Mallin parametrit viritettiin regressioanalyysillä ja valmistajan palautetta apuna käyttäen. Käyttäjä voi valita haluaako hän käyttää ulkoista vai alkuperäistä mallia. Alkuperäinen malli täytyy ensin alustaa antamalla sille nominaaliset toimintapisteet virtaamille ja pitoisuuksille tietyllä pyörimisnopeudella. Ulkoisen mallin yhtälöitä voi käyttää alkuperäisen mallin alustamiseen, jos alkuperäinen malli toimii ulkoista paremmin. Ulkoista mallia voi käyttää myös ilman simulointiohjelmaa Galleria-palvelimelta käsin. Käyttäjälle avautuu näin mahdollisuus tarkastella kiekkosuodattimien parametreja ja nähdä suotautumistulokset oman työasemansa ääreltä mistä tahansa, kunhan Internetyhteys on olemassa. Työn tuloksena kiekkosuodattimien laitetiedon saatavuus käyttäjille parani ja alkuperäisen simulointimallin rajoituksia ja puutteita vähennettiin.

Integrated Project Portfolio Management as a Tool for Strategic Steering and Business Control

Tutkielman päätavoitteena oli tutkia miten projektisalkun hallinnalla voidaan tukea organisaation strategista ohjausta ja liiketoimintaa. Tämän lisäksi avaintavoitteina oli kuvata projektisalkun hallinnan nykytilanne kohdeyrityksessä, paljastaa erityisiä kehitystarpeita ja lopulta luoda kohdeyrityksen projektisalkunhallinnalle tavoitetila. Kirjallisuuskatsauksessa pohdittiin projektisalkun hallinnan roolia ja tavoitteita, projektisalkun hallinnassa käyttävää prosessia, sekä menetelmiä ja tekniikoita, joilla salkkua hallitaan. Työn empiirisessä osassa syvennyttiin tutkimaan projektinsalkun hallintaan liittyviä erityispiirteitä kohdeyrityksessä. Tutkimustulosten huolellinen analysointi osoitti, että aikaisempi kirjallisuus ei riittävästi huomioi kokonaisvaltaisen, integroidun lähestymistavan tarvetta ja viestinnän tärkeyttä projektisalkun hallinnassa. Tutkimuksen johtopäätöksinä luotiin uusi integroitu projektisalkun hallintamalli ja määriteltiin kohdeyritykselle projektisalkun hallinnan tavoitetila sekä ne kehitysaskeleet, joita yrityksen tulisi lähitulevaisuudessa ottaa.

Supporting Solution Business with an Integrated Enterprise System

Some of the world’s leading companies now compete by providing integrated solutions to identify and solve each customer’s business problem by providing services to design, integrate, operate and finance a product or system during its life cycle. At the same time, because of the requirements of new global economy, companies are implementing new integrated ERP systems. The objective of this thesis was to define how solution offering can be implemented in the integrated ERP system so that it is possible to sell, deliver and maintain solution offering with the new enterprise applications. The research was conducted as a qualitative case study research consisting of literature review, theme-interviews and an analysis phase. For a start this study introduces new insight for combining solution business, offering modeling and modern ERP system theories. The results of this research illustrate the limitations of an integrated ERP system to support solution business and show the need to develop a commercial product model in order to improve the combination of solution offering and IT systems.

Insulation System in an Integrated Motor Compressor

A high-speed and high-voltage solid-rotor induction machine provides beneficial features for natural gas compressor technology. The mechanical robustness of the machine enables its use in an integrated motor-compressor. The technology uses a centrifugal compressor, which is mounted on the same shaft with the high-speed electrical machine driving it. No gearbox is needed as the speed is determined by the frequency converter. The cooling is provided by the process gas, which flows through the motor and is capable of transferring the heat away from the motor. The technology has been used in the compressors in the natural gas supply chain in the central Europe. New areas of application include natural gas compressors working at the wellheads of the subsea gas reservoir. A key challenge for the design of such a motor is the resistance of the stator insulation to the raw natural gas from the well. The gas contains water and heavy hydrocarbon compounds and it is far harsher than the sales gas in the natural gas supply network. The objective of this doctoral thesis is to discuss the resistance of the insulation to the raw natural gas and the phenomena degrading the insulation. The presence of partial discharges is analyzed in this doctoral dissertation. The breakdown voltage of the gas is measured as a function of pressure and gap distance. The partial discharge activity is measured on small samples representing the windings of the machine. The electrical field behavior is also modeled by finite element methods. Based on the measurements it has been concluded that the discharges are expected to disappear at gas pressures above 4 – 5 bar. The disappearance of discharges is caused by the breakdown strength of the gas, which increases as the pressure increases. Based on the finite element analysis, the physical length of a discharge seen in the PD measurements at atmospheric pressure was approximated to be 40 – 120 m. The chemical aging of the insulation when exposed to raw natural gas is discussed based on a vast set of experimental tests with the gas mixture representing the real gas mixture at the wellhead. The mixture was created by mixing dry hydrocarbon gas, heavy hydrocarbon compounds, monoethylene glycol, and water. The mixture was chosen to be more aggressive by increasing the amount of liquid substances. Furthermore, the temperature and pressure were increased, which resulted in accelerated test conditions. The time required to detect severe degradation was thus decreased. The test program included a comparison of materials, an analysis of the e ects of di erent compounds in the gas mixture, namely water and heavy hydrocarbons, on the aging, an analysis of the e ects of temperature and exposure duration, and also an analysis on the e ect of sudden pressure changes on the degradation of the insulating materials. It was found in the tests that an insulation consisting of mica, glass, and epoxy resin can tolerate the raw natural gas, but it experiences some degradation. The key material in the composite insulation is the resin, which largely defines the performance of the insulation system. The degradation of the insulation is mostly determined by the amount of gas mixture di used into it. The di usion was seen to follow Fick’s second law, but the coe cients were not accurately defined. The di usion was not sensitive to temperature, but it was dependent upon the thermodynamic state of the gas mixture, in other words, the amounts of liquid components in the gas. The weight increase observed was mostly related to heavy hydrocarbon compounds, which act as plasticizers in the epoxy resin. The di usion of these compounds is determined by the crosslink density of the resin. Water causes slight changes in the chemical structure, but these changes do not significantly contribute to the aging phenomena. Sudden changes in pressure can lead to severe damages in the insulation, because the motion of the di used gas is able to create internal cracks in the insulation. Therefore, the di usion only reduces the mechanical strength of the insulation, but the ultimate breakdown can potentially be caused by a sudden drop in the pressure of the process gas.

Marketing culture of Finnish research libraries : an analysis of marketing attitude, knowledge and behaviour

The aim of the present dissertation is to investigate the marketing culture of research libraries in Finland and to understand the awareness of the knowledge base of library management concerning modern marketing theories and practices. The study was based onthe notion that a leader in an organisation can have large impact on its culture. Therefore, it was considered important to learn about the market orientation that initiates at the top management and flows throughout the whole organisationthus resulting in a particular kind of library culture. The study attempts to examine the marketing culture of libraries by analysing the marketing attitudes, knowledge (underlying beliefs, values and assumptions), behaviour (market orientation), operational policies and activities, and their service performance (customer satisfaction). The research was based on the assumption that if the top management of libraries has market oriented behaviour, then their marketing attitudes, knowledge, operational policies and activities and service performance should also be in accordance. The dissertation attempts to connect all these theoretical threads of marketing culture. It investigates thirty three academic and special libraries in the south of Finland. The library director and three to ten customers from each library participated as respondents in this study. An integrated methodological approach of qualitative as well as quantitative methods was used to gain knowledge on the pertinent issues lying behind the marketing culture of research libraries. The analysis of the whole dissertation reveals that the concept of marketing has very varied status in the Finnish research libraries. Based on the entire findings, three kinds of marketing cultures were emerged: the strong- the high fliers; the medium- the brisk runners; and the weak- the slow walkers. The high fliers appeared to be modern marketing believers as their marketing approach was customer oriented and found to be closer to the emerging notions of contemporary relational marketing. The brisk runners were found to be traditional marketing advocates as their marketing approach is more `library centred¿than customer defined and thus is in line of `product orientation¿ i.e. traditional marketing. `Let the interested customers come to the library¿ was appeared to be the hallmark of the slow walkers. Application of conscious market orientation is not reflected in the library activities of the slow walkers. Instead their values, ideology and approach to serving the library customers is more in tuneof `usual service oriented Finnish way¿. The implication of the research is that it pays to be market oriented which results in higher customer satisfaction oflibraries. Moreover, it is emphasised that the traditional user based service philosophy of Finnish research libraries should not be abandoned but it needs to be further developed by building a relational based marketing system which will help the libraries to become more efficient and effective from the customers¿ viewpoint. The contribution of the dissertation lies in the framework showing the linkages between the critical components of the marketing culture of a library: antecedents, market orientation, facilitators and consequences. The dissertationdelineates the significant underlying dimensions of market-oriented behaviour of libraries which are namely customer philosophy, inter-functional coordination,strategic orientation, responsiveness, pricing orientation and competition orientation. The dissertation also showed the extent to which marketing attitudes, behaviour, knowledge were related and impact of market orientation on the serviceperformance of libraries. A strong positive association was found to exist between market orientation and marketing attitudes and knowledge. Moreover, it also shows that a higher market orientation is positively connected with the service performance of libraries, the ultimate result being higher customer satisfaction. The analysis shows that a genuine marketing culture represents a synthesis of certain marketing attitudes, knowledge and of selective practices. This finding is particularly significant in the sense that it manifests that marketing culture consists of a certain sets of beliefs and knowledge (which form a specific attitude towards marketing) and implementation of a certain set of activities that actually materialize the attitude of marketing into practice (market orientation) leading to superior service performance of libraries.

Accuracy Analysis of Frequency Converter Estimates in Diagnostic Applications

Transportation of fluids is one of the most common and energy intensive processes in the industrial and HVAC sectors. Pumping systems are frequently subject to engineering malpractice when dimensioned, which can lead to poor operational efficiency. Moreover, pump monitoring requires dedicated measuring equipment, which imply costly investments. Inefficient pump operation and improper maintenance can increase energy costs substantially and even lead to pump failure. A centrifugal pump is commonly driven by an induction motor. Driving the induction motor with a frequency converter can diminish energy consumption in pump drives and provide better control of a process. In addition, induction machine signals can also be estimated by modern frequency converters, dispensing with the use of sensors. If the estimates are accurate enough, a pump can be modelled and integrated into the frequency converter control scheme. This can open the possibility of joint motor and pump monitoring and diagnostics, thereby allowing the detection of reliability-reducing operating states that can lead to additional maintenance costs. The goal of this work is to study the accuracy of rotational speed, torque and shaft power estimates calculated by a frequency converter. Laboratory tests were performed in order to observe estimate behaviour in both steady-state and transient operation. An induction machine driven by a vector-controlled frequency converter, coupled with another induction machine acting as load was used in the tests. The estimated quantities were obtained through the frequency converter’s Trend Recorder software. A high-precision, HBM T12 torque-speed transducer was used to measure the actual values of the aforementioned variables. The effect of the flux optimization energy saving feature on the estimate quality was also studied. A processing function was developed in MATLAB for comparison of the obtained data. The obtained results confirm the suitability of this particular converter to provide accurate enough estimates for pumping applications.

Exploring Customer-Oriented Service Offerings in Public Health: Developing Integrated Health Care Services for Rural Areas

Väestön ikääntyminen pakottaa yhteiskunnan ja julkisen terveydenhuollon muutoksiin. Jotta ikääntyvien ihmisten kotona asuminen voidaan mahdollistaa, palvelujärjestelmän pitää mukautua muuttuvaan tilanteeseen. Tämän diplomityön tarkoituksena on tunnistaa asiakaslähtöisiä lähellä asiakasta tarjottavia palvelukokonaisuuksia. Tutkimuksen teoreettinen viitekehys muodostuu asiakasarvon luomisesta ja palvelutarjoamista. Tarkasteluryhmänä on Etelä-Karjalan alueen 60–90-vuotiaat ja käytetty aineisto on kerätty vastaajilta postitse lähetetyllä kyselyllä. Tutkimus on eksploratiivinen ja tulosten tulkinnassa on hyödynnetty määrällisen tutkimuksen ja verkostoanalyysin menetelmiä. Työn keskeisimmät tulokset ovat tunnistetut asiakassegmentit ja heidän tarpeidensa pohjalta muodostetut palvelupaketit. Tulokset indikoivat asiakkaiden tarpeita ja tuloksia on analysoitu myös tuottajan näkökulmasta. Empiiristen tulosten lisäksi teoriaviitekehystä on kehitetty eteenpäin, jotta palvelukeskeiset teoriat voidaan ymmärtää yritysten näkökulman lisäksi asiakkaan näkökulmasta.

Mobile clinics in public health care: Integrated service offerings for rural elderly

This research is an analysis of the value and content of local service offerings that enable longer periods of living at home for elderly people. Mobile health care and new distribution services have provided an interesting solution in this context. The research aim to shed light on the research question, ‘How do we bundle services based on different customer needs?’ A research process consisting of three main phases was applied for this purpose. During this process, elderly customers were segmented, the importance of services was rated and service offerings were defined. Value creation and service offering provides theoretical framework for the research. The target group is South Karelia’s 60 to 90-year old individuals and the data has been acquired via a postal questionnaire. Research has been conducted as exploratory research utilizing the methods of quantitative and social network analysis. The main results of the report are identified customer segments and service packages that fits to the segments’ needs. The results indicate the needs of customers and the results are additionally analysed from the producer’s point of view. In addition to the empirical results, the used theory framework has been developed further in order for the service-related theories to be seen from the customer’s point of view and not just from the producer’s point of view.

Target audience and message alignment for integrated marketing communication of luxury products: entering the Chinese market

The purpose of this study is to identify opportunities to match marketing communication message strategies with the target audience characteristics in the Chinese luxury market entry context. Therefore, consumer behaviour and psychographic marketing segmentation fields are being reviewed in a holistic view in order to identify the similarities and connection points. Through the analysis of the messages in advertisements placed in a certain luxury and fine living magazine, message creation strategies are being anticipated.

Belt conveyor energy efficiency analysis and energy model development

An energy model of a belt conveyor was designed. Operation of a belt conveyor was researched. Operational indexes were calculated. Energy optimization process and recommendations were presented.

Analysis and modelling of chemical looping combustion process with and without oxygen uncoupling

Effective control and limiting of carbon dioxide (CO₂) emissions in energy production are major challenges of science today. Current research activities include the development of new low-cost carbon capture technologies, and among the proposed concepts, chemical combustion (CLC) and chemical looping with oxygen uncoupling (CLOU) have attracted significant attention allowing intrinsic separation of pure CO₂ from a hydrocarbon fuel combustion process with a comparatively small energy penalty. Both CLC and CLOU utilize the well-established fluidized bed technology, but several technical challenges need to be overcome in order to commercialize the processes. Therefore, development of proper modelling and simulation tools is essential for the design, optimization, and scale-up of chemical looping-based combustion systems. The main objective of this work was to analyze the technological feasibility of CLC and CLOU processes at different scales using a computational modelling approach. A onedimensional fluidized bed model frame was constructed and applied for simulations of CLC and CLOU systems consisting of interconnected fluidized bed reactors. The model is based on the conservation of mass and energy, and semi-empirical correlations are used to describe the hydrodynamics, chemical reactions, and transfer of heat in the reactors. Another objective was to evaluate the viability of chemical looping-based energy production, and a flow sheet model representing a CLC-integrated steam power plant was developed. The 1D model frame was succesfully validated based on the operation of a 150 kWth laboratory-sized CLC unit fed by methane. By following certain scale-up criteria, a conceptual design for a CLC reactor system at a pre-commercial scale of 100 MWth was created, after which the validated model was used to predict the performance of the system. As a result, further understanding of the parameters affecting the operation of a large-scale CLC process was acquired, which will be useful for the practical design work in the future. The integration of the reactor system and steam turbine cycle for power production was studied resulting in a suggested plant layout including a CLC boiler system, a simple heat recovery setup, and an integrated steam cycle with a three pressure level steam turbine. Possible operational regions of a CLOU reactor system fed by bituminous coal were determined via mass, energy, and exergy balance analysis. Finally, the 1D fluidized bed model was modified suitable for CLOU, and the performance of a hypothetical 500 MWth CLOU fuel reactor was evaluated by extensive case simulations.