Comprehensive Study of Crystal Growth from Solution

Crystal growth is an essential phase in crystallization kinetics. The rate of crystal growth provides significant information for the design and control of crystallization processes; nevertheless, obtaining accurate growth rate data is still challenging due to a number of factors that prevail in crystal growth. In industrial crystallization, crystals are generally grown from multi-componentand multi-particle solutions under complicated hydrodynamic conditions; thus, it is crucial to increase the general understanding of the growth kinetics in these systems. The aim of this work is to develop a model of the crystal growth rate from solution. An extensive literature review of crystal growth focuses on themodelling of growth kinetics and thermodynamics, and new measuring techniques that have been introduced in the field of crystallization. The growth of a singlecrystal is investigated in binary and ternary systems. The binary system consists of potassium dihydrogen phosphate (KDP, crystallizing solute) and water (solvent), and the ternary system includes KDP, water and an organic admixture. The studied admixtures, urea, ethanol and 1-propanol, are employed at relatively highconcentrations (of up to 5.0 molal). The influence of the admixtures on the solution thermodynamics is studied using the Pitzer activity coefficient model. Theprediction method of the ternary solubility in the studied systems is introduced and verified. The growth rate of the KDP (101) face in the studied systems aremeasured in the growth cell as a function of supersaturation, the admixture concentration, the solution velocity over a crystal and temperature. In addition, the surface morphology of the KDP (101) face is studied using ex situ atomic force microscopy (AFM). The crystal growth rate in the ternary systems is modelled on the basis of the two-step growth model that contains the Maxwell-Stefan (MS) equations and a surface-reaction model. This model is used together with measuredcrystal growth rate data to develop a new method for the evaluation of the model parameters. The validation of the model is justified with experiments. The crystal growth rate in an imperfectly mixed suspension crystallizer is investigatedusing computational fluid dynamics (CFD). A solid-liquid suspension flow that includes multi-sized particles is described by the multi-fluid model as well as by a standard k-epsilon turbulence model and an interface momentum transfer model. The local crystal growth rate is determined from calculated flow information in a diffusion-controlled crystal growth regime. The calculated results are evaluated experimentally.

The Association between Growth and Neurodevelopment in Very Preterm Infants – A Follow-up Study in the PIPARI Study

Placental insufficiency is one major cause of intrauterine growth restriction and also relates to neurodevelopment. Preterm infants with very low birth weight are at risk of postnatal growth restriction as well as neurodevelopmental impairments. However, the optimal postnatal growth for long-term neurodevelopment is still unclear. The objective of this study was thus to investigate the association between growth and neurodevelopment in very preterm infants. The study populations consisted of 83 (I), 55 (II), 36 (III) and 181 (IV) infants with very low birth weight (below 1501 grams), and very or extremely low gestational age (below 32 and 26 weeks). Foetal blood circulation in relation to two-year neurodevelopment and the association between early growth and brain maturation at term age were studied. Postnatal growth, and its association with five-year cognitive outcome, was analysed. Changes in foetal blood circulation related to placental insufficiency associated with an adverse two-year cognitive outcome. Early postnatal growth in extremely preterm infants was comparable to a similar Swedish cohort. Preterm infants with slow intrauterine growth had less mature brains at term age; rapid catch-up growth until term age did not eliminate this difference. Weight gain and head circumference growth from birth until two years of age associated positively with five-year cognitive outcome in appropriate for gestational age infants. In small for gestational age infants, head circumference growth from term age to four months (corrected age) associated positively with their five-year cognitive outcome. The association between postnatal growth and neurodevelopment was different for prenatally normally grown versus slow grown preterm infants.

A modified structural stress method for fatigue assessment of welded structures

Fatigue life assessment of weldedstructures is commonly based on the nominal stress method, but more flexible and accurate methods have been introduced. In general, the assessment accuracy is improved as more localized information about the weld is incorporated. The structural hot spot stress method includes the influence of macro geometric effects and structural discontinuities on the design stress but excludes the local features of the weld. In this thesis, the limitations of the structural hot spot stress method are discussed and a modified structural stress method with improved accuracy is developed and verified for selected welded details. The fatigue life of structures in the as-welded state consists mainly of crack growth from pre-existing cracks or defects. Crack growth rate depends on crack geometry and the stress state on the crack face plane. This means that the stress level and shape of the stress distribution in the assumed crack path governs thetotal fatigue life. In many structural details the stress distribution is similar and adequate fatigue life estimates can be obtained just by adjusting the stress level based on a single stress value, i.e., the structural hot spot stress. There are, however, cases for which the structural stress approach is less appropriate because the stress distribution differs significantly from the more common cases. Plate edge attachments and plates on elastic foundations are some examples of structures with this type of stress distribution. The importance of fillet weld size and weld load variation on the stress distribution is another central topic in this thesis. Structural hot spot stress determination is generally based on a procedure that involves extrapolation of plate surface stresses. Other possibilities for determining the structural hot spot stress is to extrapolate stresses through the thickness at the weld toe or to use Dong's method which includes through-thickness extrapolation at some distance from the weld toe. Both of these latter methods are less sensitive to the FE mesh used. Structural stress based on surface extrapolation is sensitive to the extrapolation points selected and to the FE mesh used near these points. Rules for proper meshing, however, are well defined and not difficult to apply. To improve the accuracy of the traditional structural hot spot stress, a multi-linear stress distribution is introduced. The magnitude of the weld toe stress after linearization is dependent on the weld size, weld load and plate thickness. Simple equations have been derived by comparing assessment results based on the local linear stress distribution and LEFM based calculations. The proposed method is called the modified structural stress method (MSHS) since the structural hot spot stress (SHS) value is corrected using information on weld size andweld load. The correction procedure is verified using fatigue test results found in the literature. Also, a test case was conducted comparing the proposed method with other local fatigue assessment methods.

Aasian toinen todellisuus - Suomen suurlähetystöjen monikulttuurisen johtamisen haasteet

Monikulttuurinen johtaminen on globalisaation ja nopean kansainvälistymisen takia erittäin ajankohtainen aihe. Suomessa sitä on kuitenkin tutkittu vasta vähän. Tämän tutkimuksen tarkoituksena on tutkia Suomen suurlähetystöjenmonikulttuurista johtamista Aasian eri kohdemaissa ja kulttuureissa sekä ottaa osaa tieteelliseen keskusteluun monikulttuurisesta johtamisesta. Tutkimuksen kohdemaiksi on valittu neljä Aasian maata, jotka ovat tällä hetkellä hyvin ajankohtaisia nopean talouskasvunsa takia. Itä-Aasiasta mukana ovat Etelä-Korea (Korean tasavalta), Japani ja Kiinan kansantasavalta sekä Kaakkois-Aasiasta tutkimuksessa mukana on Malesia. Tämä tutkimus on laadullinen tutkimus, jonka aineisto koostuu kahdesta laadulliselle tutkimukselle poikkeuksellisesta avoimesta kyselystä, jotka on lähetetty edellä mainittujen maiden suurlähettiläille eri kohdemaihin. Analyysissä menetelmänä on käytetty teemoittelua, jonka avulla on voitu jäsentää saatua aineistoa. Näin teemojen vertailu on myös ollut helpompaa. Tutkimuksen tuloksista kävi ilmi, että monikulttuurinen johtaminen on erittäin haasteellista kansallisten kulttuurien eroista johtuen. Arvot ovat hyvin keskeisessä osassa kulttuuria tutkittaessa ja niiden erot voivat vaikeuttaa kanssakäymistä eri kulttuureista tulevien ihmisten kesken, koska asioiden merkitykset jäävät usein arvoituksiksi vieraasta kulttuurista tuleville henkilöille. Kansallisen kulttuurin tekijöistä kieli, arvot ja uskonto ovat merkittäviä monikulttuurisen johtamisen kannalta. Tutkimuksesta kävi myös ilmi, että Itä- Aasian maissa konfutselaisuudella on suuri merkitys yhteiskuntafilosofiana. Se on muokannut yhteiskunnan arvoja, tapoja ja rakenteita. Vanhempien ja ylempiarvoisten ihmisten arvostus ja vahvasti hierarkkinen yhteiskuntarakenne ovat tyypillisiä konfutselaisuuden piirteitä. Kulttuurin ulottuvuuksista merkityksellisempiä tämän tutkimuksen kannalta ovat yksilöllisyys vs. kollektiivisuus, valtaetäisyys ja konfutselaisuuden dynamiikka (lyhyen vs. pitkän aikavälin suuntautuminen). Kaikki tämän tutkimuksen maat ovat kollektiivisia sekä niissä valtaetäisyys on myös korkea. Tämä tuo haasteita monikulttuuriseen johtamiseen Suomen suurlähetystöissä, koska suomalainen kulttuuri on useimpien länsimaiden tapaan yksilöllinen ja valtaetäisyys on suhteellisen matala. Konfutselaisuuden dynamiikka vaikuttaa lähinnä vain Itä-Aasian maissa tuoden mukanaan erittäin vahvan hierarkian, jota ei voi sivuuttaa. Tutkimuksen aineistoa käsitellään näytenäkökulmasta, eikä sitä ei voisuoraan verrata muihin organisaatioihin tai kulttuureihin. Toisaalta jokaisen kansallisen kulttuurin ihmiset toimivat tietyllä tavalla tietyssä kontekstissa, riippumatta siitä, missä organisaatiossa he työskentelevät. Kulttuuri ohjaa ihmisen toimintaa ja kansallinen kulttuuri on yrityskulttuuria voimakkaampi tekijä.

Treatment of NI-containing acidic mine waters with calcite side-stones

Acid mine drainage (AMD) presents a serious problem for the environment for the massive formation of acidic leachates containing heavy metals. The present work deals with the AMD treatment using neutralizing limestone side-products. The conventional methods for prevention, mitigating and control of AMD formation are described. The experimental testing of Nordkalk Oy calcite-containing side-stones for acid neutralizing and removal of nickel from solutions presents the research objective. The batch experiments in acid neutralizing with subsequent metal content analysis were carried out. The results showed the dependence of pH on the dose of neutralizing material and the exposure time. The nickel removal, unlike iron, within the pH range from 1.2 to 6.0 appeared to be inadequate. The further research on nickel co-precipitation with iron and aluminium may appear to be necessary together with testing of alkalinity strengthening materials.

Genetic, prenatal and postnatal determinants of weight gain and obesity in young children – The STEPS Study

Genetic, Prenatal and Postnatal Determinants of Weight Gain and Obesity in Young Children – The STEPS Study University of Turku, Faculty of Medicine, Department of Paediatrics, University of Turku Doctoral Program of Clinical Investigation (CLIPD), Turku Institute for Child and Youth Research. Conditions of being overweight and obese in childhood are common health problems with longlasting effects into adulthood. Currently 22% of Finnish boys and 12% of Finnish girls are overweight and 4% of Finnish boys and 2% of Finnish girls are obese. The foundation for later health is formed early, even before birth, and the importance of prenatal growth on later health outcomes is widely acknowledged. When the mother is overweight, had high gestational weight gain and disturbances in glucose metabolism during pregnancy, an increased risk of obesity in children is present. On the other hand, breastfeeding and later introduction of complementary foods are associated with a decreased obesity risk. In addition to these, many genetic and environmental factors have an effect on obesity risk, but the clustering of these factors is not extensively studied. The main objective of this thesis was to provide comprehensive information on prenatal and early postnatal factors associated with weight gain and obesity in infancy up to two years of age. The study was part of the STEPS Study (Steps to Healthy Development), which is a follow-up study consisting of 1797 families. This thesis focused on children up to 24 months of age. Altogether 26% of boys and 17% of girls were overweight and 5% of boys and 4% of girls were obese at 24 months of age according to New Finnish Growth references for Children BMI-for-age criteria. Compared to children who remained normal weight, the children who became overweight or obese showed different growth trajectories already at 13 months of age. The mother being overweight had an impact on children’s birth weight and early growth from birth to 24 months of age. The mean duration of breastfeeding was almost 2 months shorter in overweight women in comparison to normal weight women. A longer duration of breastfeeding was protective against excessive weight gain, high BMI, high body weight and high weight-for-length SDS during the first 24 months of life. Breast milk fatty acid composition differed between overweight and normal weight mothers, and overweight women had more saturated fatty acids and less n-3 fatty acids in breast milk. Overweight women also introduced complementary foods to their infants earlier than normal weight mothers. Genetic risk score calculated from 83 obesogenic- and adiposity-related single nucleotide polymorphisms (SNPs) showed that infants with a high genetic risk for being overweight and obese were heavier at 13 months and 24 months of age than infants with a low genetic risk, thus possibly predisposing to later obesity in obesogenic environment. Obesity Risk Score showed that children with highest number of risk factors had almost 6-fold risk of being overweight and obese at 24 months compared to children with lowest number of risk factors. The accuracy of the Obesity Risk Score in predicting overweight and obesity at 24 months was 82%. This study showed that many of the obesogenic risk factors tend to cluster within children and families and that children who later became overweight or obese show different growth trajectories already at a young age. These results highlight the importance of early detection of children with higher obesity risk as well as the importance of prevention measures focused on parents. Keywords: Breastfeeding, Child, Complementary Feeding, Genes, Glucose metabolism, Growth, Infant Nutrition Physiology, Nutrition, Obesity, Overweight, Programming

Suorituskyvyn mittaaminen valmistavan yrityksen logistiikkatoiminnoissa

Yrityksen hakiessa kasvua vientimarkkinoilta sen logistiikka nousee entistä tärkeämpään rooliin. Jotta tuotteet ovat kilpailukykyisiä kansainvälisillä markkinoilla, tulee tuotteen hinta – laatu – suhde olla kohdallaan, jolloin logistiikan kustannusten pienentäminen ja laadukas toimitusketju ovat varsin keskeisiä tavoitteita. Toimitusketjun eri vaiheiden laatu korostuu, kun kyseessä on räätälöity tuote, jota ei voida korvata varastossa olevalla tuotteella. Näiden tavoitteiden saavuttaminen edellyttää logistiikkaprosessien suorituskyvyn mittaamista ja kehittämistä. Suorituskyvyn mittaamisen avulla voidaan viestiä logistiikalle asetetut tavoitteet ja seurata tavoitteiden toteutumista Tämän työn tavoitteena oli selvittää, miten suorituskykyä voidaan mitata valmistavan yrityksen logistiikkatoiminnoissa. Tarkasteltavana olivat logistiikan prosessit tilauksen vahvistamisesta valmiin tuotteen toimittamiseen asiakkaalle. Työn alussa käytiin läpi suorituskyvyn mittaamista yleisellä tasolla sekä logistiikan mittaamista ja mittareita. Tämän jälkeen aloitettiin mittausjärjestelmän suunnittelu kohdeyrityksen logistiikkaosastolle, sen vision ja strategian pohjalta. Työn tuloksena kohdeyrityksen logistiikkaosastolle kehitettiin suorituskykymittaristo mittareineen. Mittareita eri logistiikkatoimintojen mittaamiseen on varsin runsaasti, ja kaikkia niitä ei ole järkevä liittää osaksi mittaristoa, mutta tilanteiden muuttuessa niitä voidaan vaihtaa tai lisätä tarpeen mukaan.

Boron, phosphorus and nitrogen fertilization in Norway spruce stands suffering from growth disturbances

Abstract

Discription of a New Calculation Method for Determination of Stoichiometric Dissociation Constants of WeakAcid in Salt Solutions from Potentiometric Titration Data

A recently developed calculation method to determine stoichiometric dissociation constants of weak acids from potentiometric titration data is described. The titration data from three different weak acids in aqueous salt solutions at 25 °C were used as examples of the use of the method. The salt alone determined the ionic strength of the solutions considered in this study, and salt molalities up to 0,5 mol kg -1 were used.

Potentiometric titration as a method of determining the stoichiometric dissociation constants of weak acids from the thermodynamic dissociation constants of aqueous solutions at 298.15 K

The simple single-ion activity coefficient equation originating from the Debye-Hückel theory was used to determine the thermodynamic and stoichiometric dissociation constants of weak acids from data concerning galvanic cells. Electromotive force data from galvanic cells without liquid junctions, which was obtained from literature, was studied in conjuction with the potentiometric titration data relating to aqueous solutions at 298.15 K. The dissociation constants of weak acids could be determined by the presented techniques and almost all the experimental data studied could be interpreted within the range of experimental error. Potentiometric titration has been used here and the calculation methods were developed to obtain the thermodynamic and stoichiometric dissociation constants of some weak acids in aqueous solutions at 298.15 K. The ionic strength of titrated solutions were adjusted using an inert electrolyte, namely, sodium or potassium chloride. Salt content alonedetermines the ionic strength. The ionic strength of the solutions studied varied from 0.059 mol kg-1 to 0.37 mol kg-1, and in some cases up to 1.0 mol kg-1. The following substances were investigated using potentiometric titration: aceticacid, propionic acid, L-aspartic acid, L-glutamic acid and bis(2,2-dimethyl-3-oxopropanol) amine.

Adsorptive removal of harmful organic compound from aqueous solutions

Adsorption is one of the most commonly used methods in water treatment processes. It is attractive due to it easy operation and the availability of a wide variety of commercial adsorbents. This doctoral thesis focuses on investigating and explaining the influence of external phase conditions (temperature, pH, ionic strength, acidity, presence of cosolutes) on adsorption phenomena. In order to cover a wide range of factors and phenomena, case studies were chosen from various fields where adsorption is applied. These include the adsorptive removal of surface active agents (used in cleaning chemicals, for example) from aqueous effluents, the removal of hormones (estradiol) from drinking water, and the adsorption of antibiotics onto silica. The latter can beused to predict the diffusion of antibiotics in the aquatic system if they are released into the environment. Also the adsorption of living cells on functionalized polymers to purify infected water streams was studied. In addition to these examples, the adsorptive separation of harmful compounds from internal water streams within a chemical process was investigated. The model system was removal of fermentation inhibitors from lignocelluloses hydrolyzates. The detoxification of the fermentation broth is an important step in the manufacture of bioethanol from wood, but has not been studied previously in connection with concentrated acid hydrolyzates. New knowledge on adsorption phenomena was generated for all of the applications investigated. In most cases, the results could be explained by combining classical theories for individual phenomena. As an example, it was demonstrated how liquid phase aggregation could explain abnormal-looking adsorption equilibrium data. In addition to the fundamental phenomena, also process performance was of interest. This aspect is often neglected in adsorption studies. It was demonstrated that adsorbents should not be selected for a target application based on their adsorption properties only, but regeneration of the spent adsorbent must be considered. It was found that using a suitable amount of organic co-solvent in the regeneration can significantly improve the productivity of the process.

Recovery of carboxylic acids from aqueous solutions

Carboxylic acids are commonly used organic acids and have many applications in industries producing food and pharmaceutical products, surfactants and detergents. Especially formic, acetic, propionic and butyric acid are important organic chemicals. These compounds can be found in many side streams and plant effluents. Recovery costs of carboxylic acids are high when they are removed from dilute solution. Conventional processes for the recovery of carboxylic acids from aqueous solutions are classical distillation or extractive distillation, azeotropic distillation or liquid-liquid extraction. The literature part of this Master’s of Science Thesis comprises possible extractants in liquid-liquid extraction of carboxylic acids from aqueous solutions and methods for their regeneration form the extract. The experimental part of this Thesis investigates liquid-liquid extraction of carboxylic acids from aqueous solutions. The aim of this work was to find a suitable extractant for liquid-liquid extraction and suitable process conditions to recover carboxylic acids from aqueous solutions. Also, back extraction of carboxylic acids and their thermal decomposition in relation to distillation of were. Experiments showed that there is more than one possible extractant for liquid-liquid extraction of carboxylic acids. Results also showed that it is possible to separate carboxylic acids and regenerate all the used extractants by vacuum distillation at suitable temperature.

EDTA- and DTPA-functionalized silica gel and chitosan adsorbents for the removal of heavy metals from aqueous solutions

Adsorbents functionalized with chelating agents are effective in removal of heavy metals from aqueous solutions. Important properties of such adsorbents are high binding affinity as well as regenerability. In this study, aminopolycarboxylic acid, EDTA and DTPA, were immobilized on the surface of silica gel, chitosan, and their hybrid materials to achieve chelating adsorbents for heavy metals such as Co(II), Ni(II), Cd(II), and Pb(II). New knowledge about the adsorption properties of EDTA- and DTPA-functionalizedadsorbents was obtained. Experimental work showed the effectiveness, regenerability, and stability of the studied adsorbents. Both advantages and disadvantages of the adsorbents were evaluated. For example, the EDTA-functionalized chitosan-silica hybrid materials combined the benefits of the silica gel and chitosan while at the same time diminishing their observed drawbacks. Modeling of adsorption kinetics and isotherms is an important step in design process. Therefore, several kinetic and isotherm models were introduced and applied in this work. Important aspects such as effect of error function, data range, initial guess values, and linearization were discussed and investigated. The selection of the most suitable model was conducted by comparing the experimental and simulated data as well as evaluating the correspondence between the theory behind the model and properties of the adsorbent. In addition, modeling of two-component data was conducted using various extended isotherms. Modeling results for both one- and twocomponent systems supported each other. Finally, application testing of EDTA- and DTPA-functionalized adsorbents was conducted. The most important result was the applicability of DTPA-functionalized silica gel and chitosan in the capturing of Co(II) from its aqueous EDTA-chelate. Moreover, these adsorbents were efficient in various solution matrices. In addition, separation of Ni(II) from Co(II) and Ni(II) and Pb(II) from Co(II) and Cd(II) was observed in two- and multimetal systems. Lastly, prior to their analysis, EDTA- and DTPA-functionalized silica gels were successfully used to preconcentrate metal ions from both pure and salty waters