Radio-frequency-based measurement methods for bearing current analysis in induction motors

The most common reason for a low-voltage induction motor breakdown is a bearing failure. Along with the increasing popularity of modern frequency converters, bearing failures have become the most important motor fault type. Conditions in which bearing currents are likely to occur are generated as a side effect of fast du/dt switching transients. Once present, different types of bearing currents can accelerate the mechanical wear of bearings by causing deformation of metal parts in the bearing and degradation of the lubricating oil properties.The bearing current phenomena are well known, and several bearing current measurement and mitigation methods have been proposed. Nevertheless, in order to develop more feasible methods to measure and mitigate bearing currents, better knowledge of the phenomena is required. When mechanical wear is caused by bearing currents, the resulting aging impact has to be monitored and dealt with. Moreover, because of the stepwise aging mechanism, periodically executed condition monitoring measurements have been found ineffective. Thus, there is a need for feasible bearing current measurement methods that can be applied in parallel with the normal operation of series production drive systems. In order to reach the objectives of feasibility and applicability, nonintrusive measurement methods are preferred. In this doctoral dissertation, the characteristics and conditions of bearings that are related to the occurrence of different kinds of bearing currents are studied. Further, the study introduces some nonintrusive radio-frequency-signal-based approaches to detect and measure parameters that are associated with the accelerated bearing wear caused by bearing currents.

Stability Analysis in Multicriteria Discrete Portfolio Optimization.

Almost every problem of design, planning and management in the technical and organizational systems has several conflicting goals or interests. Nowadays, multicriteria decision models represent a rapidly developing area of operation research. While solving practical optimization problems, it is necessary to take into account various kinds of uncertainty due to lack of data, inadequacy of mathematical models to real-time processes, calculation errors, etc. In practice, this uncertainty usually leads to undesirable outcomes where the solutions are very sensitive to any changes in the input parameters. An example is the investment managing. Stability analysis of multicriteria discrete optimization problems investigates how the found solutions behave in response to changes in the initial data (input parameters). This thesis is devoted to the stability analysis in the problem of selecting investment project portfolios, which are optimized by considering different types of risk and efficiency of the investment projects. The stability analysis is carried out in two approaches: qualitative and quantitative. The qualitative approach describes the behavior of solutions in conditions with small perturbations in the initial data. The stability of solutions is defined in terms of existence a neighborhood in the initial data space. Any perturbed problem from this neighborhood has stability with respect to the set of efficient solutions of the initial problem. The other approach in the stability analysis studies quantitative measures such as stability radius. This approach gives information about the limits of perturbations in the input parameters, which do not lead to changes in the set of efficient solutions. In present thesis several results were obtained including attainable bounds for the stability radii of Pareto optimal and lexicographically optimal portfolios of the investment problem with Savage's, Wald's criteria and criteria of extreme optimism. In addition, special classes of the problem when the stability radii are expressed by the formulae were indicated. Investigations were completed using different combinations of Chebyshev's, Manhattan and Hölder's metrics, which allowed monitoring input parameters perturbations differently.

Fuzzy real option analysis in patent related decision making and patent valuation

The shift towards a knowledge-based economy has inevitably prompted the evolution of patent exploitation. Nowadays, patent is more than just a prevention tool for a company to block its competitors from developing rival technologies, but lies at the very heart of its strategy for value creation and is therefore strategically exploited for economic pro t and competitive advantage. Along with the evolution of patent exploitation, the demand for reliable and systematic patent valuation has also reached an unprecedented level. However, most of the quantitative approaches in use to assess patent could arguably fall into four categories and they are based solely on the conventional discounted cash flow analysis, whose usability and reliability in the context of patent valuation are greatly limited by five practical issues: the market illiquidity, the poor data availability, discriminatory cash-flow estimations, and its incapability to account for changing risk and managerial flexibility. This dissertation attempts to overcome these impeding barriers by rationalizing the use of two techniques, namely fuzzy set theory (aiming at the first three issues) and real option analysis (aiming at the last two). It commences with an investigation into the nature of the uncertainties inherent in patent cash flow estimation and claims that two levels of uncertainties must be properly accounted for. Further investigation reveals that both levels of uncertainties fall under the categorization of subjective uncertainty, which differs from objective uncertainty originating from inherent randomness in that uncertainties labelled as subjective are highly related to the behavioural aspects of decision making and are usually witnessed whenever human judgement, evaluation or reasoning is crucial to the system under consideration and there exists a lack of complete knowledge on its variables. Having clarified their nature, the application of fuzzy set theory in modelling patent-related uncertain quantities is effortlessly justified. The application of real option analysis to patent valuation is prompted by the fact that both patent application process and the subsequent patent exploitation (or commercialization) are subject to a wide range of decisions at multiple successive stages. In other words, both patent applicants and patentees are faced with a large variety of courses of action as to how their patent applications and granted patents can be managed. Since they have the right to run their projects actively, this flexibility has value and thus must be properly accounted for. Accordingly, an explicit identification of the types of managerial flexibility inherent in patent-related decision making problems and in patent valuation, and a discussion on how they could be interpreted in terms of real options are provided in this dissertation. Additionally, the use of the proposed techniques in practical applications is demonstrated by three fuzzy real option analysis based models. In particular, the pay-of method and the extended fuzzy Black-Scholes model are employed to investigate the profitability of a patent application project for a new process for the preparation of a gypsum-fibre composite and to justify the subsequent patent commercialization decision, respectively; a fuzzy binomial model is designed to reveal the economic potential of a patent licensing opportunity.

Assessment of genetic diversity using RAPD analysis in a germplasm collection of sea buckthorn

Selostus: Tyrnin geneettisen monimuotoisuuden arviointi RAPD analyysillä

Value chain analysis in graphical boards business

Tällä tutkielmalla oli kaksi tavoitetta. Ensimmäinen tavoite oli selvittää, kuinka valittujen tuotteiden arvoa asiakkaiden silmissä voisi lisätä. Toisena tavoitteena oli selvittää tuotteiden arvon lisääntyminen arvoketjun jokaisella portaalla kartonkitehtaaltaloppuasiakkaalle. Tutkimuksen kohteena oli kolme erilaista arvoketjua. Tutkimusoli luonteeltaan kvalitatiivinen ja tarvittavat tiedot kerättiin haastatteluilla. Tutkimuksen tuloksena voidaan mainita, että asiakkaat arvostavat laskua kustannuksissa enemmän kuin lisähyötyjä. Myös prosentuaalinen arvonlisäys valittuihintuotteisiin arvoketjun eri portaissa saatiin selville. Tästä työstä on tehty kaksi versiota; tämä versio, joka tulee julkiseksi neljän vuoden salassapitoajan jälkeen, ja toinen versio, joka sisältää arkaluontoisempaa kustannusinformaatiotaja on siitä syystä kokonaan salainen.

Scenario analysis in evaluation of emerging technology - Case Bluetooth

Tutkimuksen tavoitteena oli selvittää millaisia ympäristöskenaarioita tietoliikenteelle toimialana voidaan rakentaa ja mitkä näistä skenaarioista suosivat Bluetoothin diffuusiota ja kehittymistä nykyisten tuote- ja palvelunäkemysten valossa. Lisäksi pyrittiin arvioimaan, mitkä ympäristötekijät ja suuntaukset saattavat vaikuttaa Bluetoothin diffuusioon. Tutkimus rajoittui eurooppalaisen tietoliikenneympäristön tarkasteluun viiden vuoden aikana. Tietoliikennetoimialan nykytilaa ja tulevaisuutta koskevan kirjallisuuden pohjalta luotiin kolme alustavaa skenaariorunkoa. Näitä runkoja arvioitiin asiantuntijahaastattelujen avulla, jotta skenaarioista saataisiin monipuolisempia ja niiden johdonmukaisuutta voitaisiin parantaa. Lopullisia skenaarioita verrattiin Bluetoothin käyttökohteista esitettyihin näkemyksiin. Skenaarioiden teemat olivat “Fokusoidut bisnessovellukset”, “Viihdettä massoille” sekä “Tietoa kaikille”. Havaittiin, että Bluetoothin omaksumiseen vaikuttavat eniten seuraavat tekijät: teknologian sosiaalinen hyväksyntä, toimialan halukkuus teknologian edistämiseen sekä Bluetoothin ja sen kilpailijoiden kehittyminen jatkossa.

Competitor Analysis in a Finnish Forest Industry Company

Työn tavoitteena oli analysoida yhden metsäteollisuusyrityksen tuotantolaitosta; sen heikkouksia ja vahvuuksia sekä määrittää tarvittavat kilpailukeinot. Työ perustuu Porterin kilpailija-analyysin viitekehykseen. Tarvittava kilpailijatieto on kerätty pääosin julkisista lähteistä, yrityksen tietokannoista, ja työntekijöiltä sekä tuotetestauksella. Kilpailijan analysointi koostuu lähinnä kilpailijan tuotantoresurssien, palveluiden ja tuotteiden analysoinnista. Lisäksi työssä käydään läpi kilpailijan strategiaa ja tavoitteita sekä kilpailijan olettamuksia itsestään ja kilpailijoistaan. Ennen varsinaista kilpailija-analyysia työssä tutustutaan metsäteollisuuden kasvuodotuksiin ja tulevaisuuden markkinatrendeihin, joita hyödynnetään johtopäätöksissä. Vaikkakin kilpailija keskittyy eri loppukäyttösegmentille kuin tutkimuksen teettänyt yritys, on se varteenotettava kilpailija tiettyjen tuoteominaisuuksien ansiosta. Kuitenkaan nykyisellä palvelutasolla ja resursseilla kilpailija ei ole tällä hetkellä suuri uhka yritykselle. Sen vuoksi toimenpide-ehdotukset ovat vähäiset ja liittyvät lähinnä markkinoinnillisiin näkökohtiin.

Wavelet Analysis in Turbulence

The objective of this thesis is to study wavelets and their role in turbulence applications. Under scrutiny in the thesis is the intermittency in turbulence models. Wavelets are used as a mathematical tool to study the intermittent activities that turbulence models produce. The first section generally introduces wavelets and wavelet transforms as a mathematical tool. Moreover, the basic properties of turbulence are discussed and classical methods for modeling turbulent flows are explained. Wavelets are implemented to model the turbulence as well as to analyze turbulent signals. The model studied here is the GOY (Gledzer 1973, Ohkitani & Yamada 1989) shell model of turbulence, which is a popular model for explaining intermittency based on the cascade of kinetic energy. The goal is to introduce better quantification method for intermittency obtained in a shell model. Wavelets are localized in both space (time) and scale, therefore, they are suitable candidates for the study of singular bursts, that interrupt the calm periods of an energy flow through various scales. The study concerns two questions, namely the frequency of the occurrence as well as the intensity of the singular bursts at various Reynolds numbers. The results gave an insight that singularities become more local as Reynolds number increases. The singularities become more local also when the shell number is increased at certain Reynolds number. The study revealed that the singular bursts are more frequent at Re ~ 107 than other cases with lower Re. The intermittency of bursts for the cases with Re ~ 106 and Re ~ 105 was similar, but for the case with Re ~ 104 bursts occured after long waiting time in a different fashion so that it could not be scaled with higher Re.

Offering Analysis in New Product Launch and Sales Planning

This Master's Thesis has been written for Stora Enso Flexible Packaging Papers business unit. In the North-American mills, the business unit has developed a range of new flexible packaging paper grades. The Master's Thesis researches opportunities for sales of these new flexible packaging papers in selected Western-European markets. This study consists of theoretical and empirical part. Theoretical part presents supply chain of flexible packaging, discovering of customer requirements, concept of an offering, general market analysis, customer analysis and basis for sales planning. Empirical part includes preliminary market analysis based on secondary sources, results of lead user interviews and conclusions and recommendations. Potential customers' technical and commercial requirements were found and these were compared to current Stora Enso Flexible Packaging Papers offering. Also a list of potential new customers was made and sales action suggestions were presented in order to gain new accounts.

Use of scenario analysis in studying emerging technology – Case Grid computing

Tutkimuksen selvitettiin miten skenaarioanalyysia voidaan käyttää uuden teknologian tutkimisessa. Työssä havaittiin, että skenaarioanalyysin soveltuvuuteen vaikuttaa eniten teknologisen muutoksen taso ja saatavilla olevan tiedon luonne. Skenaariomenetelmä soveltuu hyvin uusien teknologioiden tutkimukseen erityisesti radikaalien innovaatioiden kohdalla. Syynä tähän on niihin liittyvä suuri epävarmuus, kompleksisuus ja vallitsevan paradigman muuttuminen, joiden takia useat muut tulevaisuuden tutkimuksen menetelmät eivät ole tilanteessa käyttökelpoisia. Työn empiirisessä osiossa tutkittiin hilaverkkoteknologian tulevaisuutta skenaarioanalyysin avulla. Hilaverkot nähtiin mahdollisena disruptiivisena teknologiana, joka radikaalina innovaationa saattaa muuttaa tietokonelaskennan nykyisestä tuotepohjaisesta laskentakapasiteetin ostamisesta palvelupohjaiseksi. Tällä olisi suuri vaikutus koko nykyiseen ICT-toimialaan erityisesti tarvelaskennan hyödyntämisen ansiosta. Tutkimus tarkasteli kehitystä vuoteen 2010 asti. Teorian ja olemassa olevan tiedon perusteella muodostettiin vahvaan asiantuntijatietouteen nojautuen neljä mahdollista ympäristöskenaariota hilaverkoille. Skenaarioista huomattiin, että teknologian kaupallinen menestys on vielä monen haasteen takana. Erityisesti luottamus ja lisäarvon synnyttäminen nousivat tärkeimmiksi hilaverkkojen tulevaisuutta ohjaaviksi tekijöiksi.

GPRS/EDGE Session Tracing and Analysis in Abis and AGPRS Interfaces

Efficient problem solving in cellular networks is important when enhancing the network performance and liability. Analysis of calls and packet switched sessions in protocol level between the network elements is an important part of this process. They can provide very detailed information about error situations which otherwise would be difficult to recognise. In this thesis we seek solutions for monitoring GPRS/EDGE sessions in two specific interfaces simultaneously in such manner that all information important to the users will be provided in easily understandable form. This thesis focuses on Abis and AGPRS interfaces of GSM radio network and introduces a solution for managing the correlation between these interfaces by using signalling messages and common parameters as linking elements. ~: Finally this thesis presents an implementation of GPRS/EDGE session monitoring application for Abis and AGPRS interfaces and evaluates its benefits to the end users. Application is implemented as a part of Windows based 3G/GSM network analyser.

The Use of Radiostereometric Analysis in Fractures of the Distal Radius: From Phantom Models to Clinical Application

Radiostereometric analysis (RSA) is a highly accurate method for the measurement of in vivo micromotion of orthopaedic implants. Validation of the RSA method is a prerequisite for performing clinical RSA studies. Only a limited number of studies have utilised the RSA method in the evaluation of migration and inducible micromotion during fracture healing. Volar plate fixation of distal radial fractures has increased in popularity. There is still very little prospective randomised evidence supporting the use of these implants over other treatments. The aim of this study was to investigate the precision, accuracy, and feasibility of using RSA in the evaluation of healing in distal radius fractures treated with a volar fixed-angle plate. A physical phantom model was used to validate the RSA method for simple distal radius fractures. A computer simulation model was then used to validate the RSA method for more complex interfragmentary motion in intra-articular fractures. A separate pre-clinical investigation was performed in order to evaluate the possibility of using novel resorbable markers for RSA. Based on the validation studies, a prospective RSA cohort study of fifteen patients with plated AO type-C distal radius fractures with a 1-year follow-up was performed. RSA was shown to be highly accurate and precise in the measurement of fracture micromotion using both physical and computer simulated models of distal radius fractures. Resorbable RSA markers demonstrated potential for use in RSA. The RSA method was found to have a high clinical precision. The fractures underwent significant translational and rotational migration during the first two weeks after surgery, but not thereafter. Maximal grip caused significant translational and rotational interfragmentary micromotion. This inducible micromotion was detectable up to eighteen weeks, even after the achievement of radiographic union. The application of RSA in the measurement of fracture fragment migration and inducible interfragmentary micromotion in AO type-C distal radius fractures is feasible but technically demanding. RSA may be a unique tool in defining the progress of fracture union.