17 resultados para Earnings and dividend announcements, high frequency data, information asymmetry
em Doria (National Library of Finland DSpace Services) - National Library of Finland, Finland
Resumo:
This study examines the short time price effect of dividend announcements during a boom and a recession. The data being used here is gathered from the years of 2000 - 2002 when it was a recession after the techno bubble burst and from the years 2005 - 2007 when investors experienced large capital gains all around the world. The data consists of dividend increases and intact observations. The aim is to find out differences in abnormal returns between a boom and a recession. Second, the study examines differences between different dividend yield brackets. Third, Finnish extra dividends, mainly being delivered to shareholders in 2004 are included to the empirical test. Generally stated, the aim is to find out do investors respect dividends more during a recession than a boom and can this be proved by using dividend yield brackets. The empirical results from U.S shows that the abnormal returns of dividend increase announcements during the recession in the beginning of this decade were larger than during the boom. Thus, investors seem to respect dividend increases more when stock prices are falling. Substantial abnormal returns of dividend increases during the time period of 2005 - 2007 could not be found. The results from the overall samples state that the abnormal returns during the recession were positively slightly higher than during the boom. No clear and strong evidence was found between different dividend yield brackets. In Finland, there were substantial abnormal returns on the announcement day of the extra dividends. Thus, indicating that investors saw the extra dividends as a good thing for shareholders' value. This paper is mostly in line with the theory that investors respect dividends more during bad times than good times.
Resumo:
Tutkimuksen tavoitteena on tutkia epänormaalien tuottojen esiintymistä nousu- ja laskusuhdanteen aikana osingonilmoituspäivän ympärillä. Osinkoilmoitukset ovat kerätty Yhdysvaltojen markkinalta (NYSE) ajanjaksoilta 2000 - 2002, jolloin pörssit laskivat teknokuplan jälkeen ja 2005 - 2007, jolloin sijoittajat kokivat suuria kurssivoittoja. Osinkoilmoitushavainnot koostuvat yhtiöistä, jotka nostivat tai pitivät osinko per osake paikallaan. Tavoitteena on tutkia eroja epänormaaleissa tuotoissa näiden kahden ajanjakson välillä. Toiseksi, tavoitteena on tutkia miten epänormaalit tuotot poikkeavat toisistaan eri osinkotuottoluokissa. Kolmanneksi, tavoitteena on tutkia esiintyikö markkinoilla epänormaaleja tuottoja kun suomalaiset yritykset ilmoittivat ylimääräisistä osingoista, pääasiassa vuonna 2004. Yksinkertaisesti ja lyhyesti sanottuna tavoitteena on tutkia arvostavatko sijoittajat osinkoja enemmän laskukauden vai nousukauden aikana. Rahoitusteorian mukaan sijoittajien tulisi arvostaa laskukauden aikana enemmän yhtiöitä, jotka pystyvät maksamaan huonosta taloustilanteesta huolimatta hyvää osinkoa. Empiiriset testit Yhdysvalloista osoittavat, että osingon nostamisesta johtuvat epänormaalit tuotot olivat suuremmat laskusuhdanteen aikana kuin noususuhdanteen aikana. Tämä on linjassa teorian kanssa. Osingon-nostot aiheuttivat nousukauden aikana vähäisiä epänormaaleja tuottoja. Selviä eroja eri osingontuottoluokkien välillä ei pystytty havaitsemaan. Tulokset yhdistetystä aineistosta osoittavat, että sijoittajat kokivat vähäisiä positiivisia epänormaaleja tuottoja laskukauden aikana. Nousukautena tuotot olivat lähellä nollaa. Suomen markkinoilla havaittiin selvä epänormaalituotto osingonilmoituspäivänä. Tulokset ovat pääpiirteittäin linjassa teorian kanssa. Sijoittajat arvostavat osinkoja hieman enemmän lasku- kuin noususuhdanteen aikana.
Resumo:
Education in Finland plays a significant role. International students are becoming an essential part of Finnish Educational system. The study was meant to examine their expectations and experiences in a Finnish University. As a case, Lappeenranta University of Technology (LUT) was chosen and, in particular, Information Technology (IT) Department. The main objectives of the study were to examine students’ satisfaction of their study experiences, their evaluation of the teaching quality of courses and last but not least the cultural impact on those. Data for the study were mainly collected with the help of three Internet surveys from a sample of 50 students – currently studying at LUT or already graduated. Response rate from questionnaire to questionnaire varied, however, still close to average and was considered as good and relevant enough. The study was initially meant as qualitative, however, a number of quantitative data analysis methods were used as well. Most of students’ expectations appear to become true, majority of students are satisfied with their experiences. Results show that teaching quality in LUT is evaluated as ‘good’. Nevertheless, students prefer particular courses to the other ones. In conclusion, it can be said that culture does affect students’ expectations, experiences, perception of the world, however, cultural differences do not cause any serious problems.
Resumo:
Tourism is one of the biggest industry branches with billions of tourists traveling every year around the world. Therefore, solutions providing tourist information have to be up to date with both changes in the industry and the world’s technological progress. The aim of this thesis is to present a design and a prototype of a tourist mobile service which is individual-oriented, cost-free for the end user, and secure. On the information providers’ side, the solution is implemented as a Webbased database. The end users access the information through a Bluetooth application on their mobile devices. The Bluetooth-based solution allows to avoid any costs for the end users, that is tourists. The study shows that, even with small data transfers, the tourists could save significantly when compared to possible roaming charges for data transfer. Also, the proposed mobile service is not intrusive, as it is provided through an application installed by tourists voluntarily on their mobile devices. Through design and implementation this work shows that it is possible to build a system which can be used to provide information services to tourists through mobile phones. The work achieved a successful ongoing synchronization between the client and the server databases. Implementation and usage were limited to smart phones only, as they provide better technological support for the solution having features like maps, GPS, Wi-Fi, Bluetooth and Databases. Moreover, the design of this system shows how Bluetooth technology can be used effectively as a means of communication while minimizing its shortcomings and risks, such as security, by bypassing Bluetooth server service discovery protocol (SDP) and connecting directly to the device. Apart from showing the design and implementation of the end-user costfree mobile information service, the results of this work also highlight the possible business opportunities to the provider of the service.
Resumo:
Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014
Resumo:
A high-frequency cyclonverter acts as a direct ac-to-ac power converter circuit that does not require a diode bidge rectifier. Bridgeless topology makes it possible to remove forward voltage drop losses that are present in a diode bridge. In addition, the on-state losses can be reduced to 1.5 times the on-state resistance of switches in half-bridge operation of the cycloconverter. A high-frequency cycloconverter is reviewed and the charging effect of the dc-capacitors in ``back-to-back'' or synchronous mode operation operation is analyzed. In addition, a control method is introduced for regulating dc-voltage of the ac-side capacitors in synchronous operation mode. The controller regulates the dc-capacitors and prevents switches from reaching overvoltage level. This can be accomplished by variating phase-shift between the upper and the lower gate signals. By adding phase-shift between the gate signal pairs, the charge stored in the energy storage capacitors can be discharged through the resonant load and substantially, the output resonant current amplitude can be improved. The above goals are analyzed and illustrated with simulation. Theory is supported with practical measurements where the proposed control method is implemented in an FPGA device and tested with a high-frequency cycloconverter using super-junction power MOSFETs as switching devices.
Resumo:
Our surrounding landscape is in a constantly dynamic state, but recently the rate of changes and their effects on the environment have considerably increased. In terms of the impact on nature, this development has not been entirely positive, but has rather caused a decline in valuable species, habitats, and general biodiversity. Regardless of recognizing the problem and its high importance, plans and actions of how to stop the detrimental development are largely lacking. This partly originates from a lack of genuine will, but is also due to difficulties in detecting many valuable landscape components and their consequent neglect. To support knowledge extraction, various digital environmental data sources may be of substantial help, but only if all the relevant background factors are known and the data is processed in a suitable way. This dissertation concentrates on detecting ecologically valuable landscape components by using geospatial data sources, and applies this knowledge to support spatial planning and management activities. In other words, the focus is on observing regionally valuable species, habitats, and biotopes with GIS and remote sensing data, using suitable methods for their analysis. Primary emphasis is given to the hemiboreal vegetation zone and the drastic decline in its semi-natural grasslands, which were created by a long trajectory of traditional grazing and management activities. However, the applied perspective is largely methodological, and allows for the application of the obtained results in various contexts. Models based on statistical dependencies and correlations of multiple variables, which are able to extract desired properties from a large mass of initial data, are emphasized in the dissertation. In addition, the papers included combine several data sets from different sources and dates together, with the aim of detecting a wider range of environmental characteristics, as well as pointing out their temporal dynamics. The results of the dissertation emphasise the multidimensionality and dynamics of landscapes, which need to be understood in order to be able to recognise their ecologically valuable components. This not only requires knowledge about the emergence of these components and an understanding of the used data, but also the need to focus the observations on minute details that are able to indicate the existence of fragmented and partly overlapping landscape targets. In addition, this pinpoints the fact that most of the existing classifications are too generalised as such to provide all the required details, but they can be utilized at various steps along a longer processing chain. The dissertation also emphases the importance of landscape history as an important factor, which both creates and preserves ecological values, and which sets an essential standpoint for understanding the present landscape characteristics. The obtained results are significant both in terms of preserving semi-natural grasslands, as well as general methodological development, giving support to science-based framework in order to evaluate ecological values and guide spatial planning.
Resumo:
The goal of this thesis is to gain more in-depth understanding of employer branding and offer suggestions on how this knowledge could be utilized in the case company. More in detail, the purpose of this research is to provide tools for improving Lindström’s organizational attractiveness and boosting the recruitment and retention of the segment of high-performing sales professionals. A strategy for reaching this particular segment has not been previously drawn and HR-managers believe strongly that it would be very beneficial for the company’s development and growth. The topic of this research is very current for Lindström, but also contributes on general level as companies are competing against each other in attracting, recruiting and retention of skilled workforce in the times of labor shortage. The research is conducted with qualitative methods and the data collection includes primary data through interviews as well as secondary data in the form of analysis on previous research, websites, recruitment material and discussions with Lindström’s HR department. This research provides a good basis for broader examination on the topic and presents development suggestions for the identified challenges. Based on the key findings Lindström’s HR department was advised to increase firm’s visibility, broaden recruitment channels, provide more hands-on knowledge about the sales positions and investigate their possibilities of developing sales reward systems.
Resumo:
The purpose of this thesis is to study factors that explain the bilateral fiber trade flows. This is done by analyzing bilateral trade flows during 1990-2006. It will be studied also, whether there are differences between fiber types. This thesis uses a gravity model approach to study the trade flows. Gravity model is mostly used to study the aggregate data between trading countries. In this thesis the gravity model is applied to single fibers. This model is then applied to panel data set. Results from the regression show clearly that there are benefits in studying different fibers in separate. The effects differ considerably from each other. Furthermore, this thesis speaks for the existence of Linder’s effect in certain fiber types.
Resumo:
In many industrial applications, accurate and fast surface reconstruction is essential for quality control. Variation in surface finishing parameters, such as surface roughness, can reflect defects in a manufacturing process, non-optimal product operational efficiency, and reduced life expectancy of the product. This thesis considers reconstruction and analysis of high-frequency variation, that is roughness, on planar surfaces. Standard roughness measures in industry are calculated from surface topography. A fast and non-contact method to obtain surface topography is to apply photometric stereo in the estimation of surface gradients and to reconstruct the surface by integrating the gradient fields. Alternatively, visual methods, such as statistical measures, fractal dimension and distance transforms, can be used to characterize surface roughness directly from gray-scale images. In this thesis, the accuracy of distance transforms, statistical measures, and fractal dimension are evaluated in the estimation of surface roughness from gray-scale images and topographies. The results are contrasted to standard industry roughness measures. In distance transforms, the key idea is that distance values calculated along a highly varying surface are greater than distances calculated along a smoother surface. Statistical measures and fractal dimension are common surface roughness measures. In the experiments, skewness and variance of brightness distribution, fractal dimension, and distance transforms exhibited strong linear correlations to standard industry roughness measures. One of the key strengths of photometric stereo method is the acquisition of higher frequency variation of surfaces. In this thesis, the reconstruction of planar high-frequency varying surfaces is studied in the presence of imaging noise and blur. Two Wiener filterbased methods are proposed of which one is optimal in the sense of surface power spectral density given the spectral properties of the imaging noise and blur. Experiments show that the proposed methods preserve the inherent high-frequency variation in the reconstructed surfaces, whereas traditional reconstruction methods typically handle incorrect measurements by smoothing, which dampens the high-frequency variation.
Resumo:
Lappeenrannan teknillisen yliopiston Tietotekniikan kandidaatin ja maisterin tutkinto-ohjelmien itsearviointi toteutettiin v. 2012 kansainvälistä akkreditointia varten. Itsearviointiraportissa kuvataan tutkinto-ohjelmien tavoitteet, toteutus ja arviointimenettelyt sekä tulokset.