Partnering in the Dynamic Environment: The Role of Trust in Asymmetric Technology Partnership Formation

The purpose of this study was to increase the understanding of the role and nature of trust in asymmetric technology partnership formation. In the knowledge-based "learning race" knowledge is considered as a primary source for competitive advantage. In the emerging ICT sector the high pace of technological change, the convergence of technologies and industries as well as the increasing complexity and uncertainty have forced even the largest players to seek cooperation for complementary knowledge and capabilities. Small technology firms need the complementary resources and legitimacy of the large firms to grow and compete in the global market place. Most of the earlier research indicates, however, that partnerships with asymmetric size, managerial resources and cultures have failed. A basic assumption supported by earlier research was that trust is a critical factor in asymmetric technology partnership formation. Asymmetric technology partnership formation is a dynamic and multi-dimensional process, and consequently a holistic research approach was selected. Research issue was approached from different levels: the individual decision-maker, the firm and the relationship between the parties. Also the impact of the dynamic environment and technology content was analyzed. A multitheoretical approach and a qualitative research method with in-depth interviews in five large ICT companies and eight small ICT companies enabled a holistic and rich view of the research issue. Study contributes on the scarce understanding on the nature and evolution of trust in asymmetric technology partnership formation. It sheds also light on the specific nature of asymmetric technology partnerships. The partnerships were found to be tentative and the diverse strategic intent of small and large technology firms appeared as a major challenge. The role of the boundary spanner was highlighted as a possibility to match the incompatible organizational cultures. A shared vision was found to be a pre-condition for individual-based fast trust leading to intuitive decision-making and experimentation. The relationships were tentative and they were continuously re-evaluated through the key actors' sense making of the technology content, asymmetry and the dynamic environment. A multi-dimensional conceptualization for trust was created and propositions on the role and nature of trust for further research are given. The purpose of this study was to increase the understanding of the role and nature of trust in asymmetric technology partnership formation. In the knowledge-based "learning race" knowledge is considered as a primary source for competitive advantage. In the emerging ICT sector the high pace of technological change, the convergence of technologies and industries as well as the increasing complexity and uncertainty have forced even the largest players to seek cooperation for complementary knowledge and capabilities. Small technology firms need the complementary resources and legitimacy of the large firms to grow and compete in the global market place. Most of the earlier research indicates, however, that partnerships with asymmetric size, managerial resources and cultures have failed. A basic assumption supported by earlier research was that trust is a critical factor in asymmetric technology partnership formation. Asymmetric technology partnership formation is a dynamic and multi-dimensional process, and consequently a holistic research approach was selected. Research issue was approached from different levels: the individual decision-maker, the firm and the relationship between the parties. Also the impact of the dynamic environment and technology content was analyzed. A multitheoretical approach and a qualitative research method with in-depth interviews in five large ICT companies and eight small ICT companies enabled a holistic and rich view of the research issue. Study contributes on the scarce understanding on the nature and evolution of trust in asymmetric technology partnership formation. It sheds also light on the specific nature of asymmetric technology partnerships. The partnerships were found to be tentative and the diverse strategic intent of small and large technology firms appeared as a major challenge. The role of the boundary spanner was highlighted as a possibility to match the incompatible organizational cultures. A shared vision was found to be a pre-condition for individual-based fast trust leading to intuitive decision-making and experimentation. The relationships were tentative and they were continuously re-evaluated through the key actors' sense making of the technology content, asymmetry and the dynamic environment. A multi-dimensional conceptualization for trust was created and propositions on the role and nature of trust for further research are given.

Molecular modeling of asymmetric induction in heterogeneously catalyzed hydrogenation of the C=O bond

Modifiering av metallytor med starkt adsorberade kirala organiska molekyler är eventuellt den mest relevanta teknik man vet i dag för att skapa kirala ytor. Den kan utnyttjas i katalytisk produktion av enantiomeriskt rena kirala föreningar som behövs t.ex. som läkemedel och aromkemikalier. Trots många fördelar av asymmetrisk heterogen katalys jämfört med andra sätt för att få kirala föreningar, har den ändå inte blivit ett allmänt verktyg för storskaliga tillämpningar. Detta beror t.ex. på brist på djupare kunskaper i katalytiska reaktionsmekanismer och ursprunget för asymmetrisk induktion. I denna studie användes molekylmodelleringstekniker för att studera asymmetriska, heterogena katalytiska system, speciellt hydrering av prokirala karbonylföreningar till motsvarande kirala alkoholer på cinchona-alkaloidmodifierade Pt-katalysatorer. 1-Fenyl-1,2-propandion (PPD) och några andra föreningar, som innehåller en prokiral C=O-grupp, användes som reaktanter. Konformationer av reaktanter och cinchona-alkaloider (som kallas modifierare) samt vätebundna 1:1-komplex mellan dem studerades i gas- och lösningsfas med metoder som baserar sig på vågfunktionsteori och täthetsfunktionalteori (DFT). För beräkningen av protonaffiniteter användes också högst noggranna kombinationsmetoder såsom G2(MP2). Den relativa populationen av modifierarnas konformationer varierade som funktion av modifieraren, dess protonering och lösningsmedlet. Flera reaktant–modifierareinteraktionsgeometrier beaktades. Slutsatserna på riktning av stereoselektivitet baserade sig på den relativa termodynamiska stabiliteten av de diastereomeriska reaktant–modifierare-komplexen samt energierna hos π- och π*-orbitalerna i den reaktiva karbonylgruppen. Adsorption och reaktioner på Pt(111)-ytan betraktades med DFT. Regioselektivitet i hydreringen av PPD och 2,3-hexandion kunde förklaras med molekyl–yta-interaktioner. Storleken och formen av klustret använt för att beskriva Pt-ytan inverkade inte bara på adsorptionsenergierna utan också på de relativa stabiliteterna av olika adsorptionsstrukturer av en molekyl. Populationerna av modifierarnas konformationer i gas- och lösningsfas korrelerade inte med populationerna på Pt-ytan eller med enantioselektiviteten i hydreringen av PPD på Pt–cinchona-katalysatorer. Vissa modifierares konformationer och reaktant–modifierare-interaktionsgeometrier var stabila bara på metallytan. Teoretiskt beräknade potentialenergiprofiler för hydrering av kirala α-hydroxiketoner på Pt implicerade preferens för parvis additionsmekanism för väte och selektiviteter i harmoni med experimenten. De uppnådda resultaten ökar uppfattningen om kirala heterogena katalytiska system och kunde därför utnyttjas i utvecklingen av nya, mera aktiva och selektiva kirala katalysatorer.

Effect of loading type on the fatigue strength of symmetric and asymmetric welded joints made of ultra high strength steel

In this study, finite element analyses and experimental tests are carried out in order to investigate the effect of loading type and symmetry on the fatigue strength of three different non-load carrying welded joints. The current codes and recommendations do not give explicit instructions how to consider degree of bending in loading and the effect of symmetry in the fatigue assessment of welded joints. The fatigue assessment is done by using effective notch stress method and linear elastic fracture mechanics. Transverse attachment and cover plate joints are analyzed by using 2D plane strain element models in FEMAP/NxNastran and Franc2D software and longitudinal gusset case is analyzed by using solid element models in Abaqus and Abaqus/XFEM software. By means of the evaluated effective notch stress range and stress intensity factor range, the nominal fatigue strength is assessed. Experimental tests consist of the fatigue tests of transverse attachment joints with total amount of 12 specimens. In the tests, the effect of both loading type and symmetry on the fatigue strength is studied. Finite element analyses showed that the fatigue strength of asymmetric joint is higher in tensile loading and the fatigue strength of symmetric joint is higher in bending loading in terms of nominal and hot spot stress methods. Linear elastic fracture mechanics indicated that bending reduces stress intensity factors when the crack size is relatively large since the normal stress decreases at the crack tip due to the stress gradient. Under tensile loading, experimental tests corresponded with finite element analyzes. Still, the fatigue tested joints subjected to bending showed the bending increased the fatigue strength of non-load carrying welded joints and the fatigue test results did not fully agree with the fatigue assessment. According to the results, it can be concluded that in tensile loading, the symmetry of joint distinctly affects on the fatigue strength. The fatigue life assessment of bending loaded joints is challenging since it depends on whether the crack initiation or propagation is predominant.

Systeemihinnan volatiliteetin mallinus Nord Pool -sähkömarkkinoilla

Työssä tarkastellaan, miten Nord Poolin spot-sähkömarkkinoiden systeemihinnan volatiliteetti on kehittynyt kyseisten markkinoiden kehittyessä ja onko volatiliteetin dynamiikkaa mahdollista mallintaa. Systeemihinta toimii referenssihintana sekä itse sähköpörssissä että pörssin ulkopuolella tapahtuvassa johdannaiskaupankäynnissä. Teoriaosassa luodaan katsaus Nord Pool -markkinoiden toimintaan ja systeemihinnan muodostumisen periaatteisiin. Lisäksi tutustutaan sähkön hinta-aikasarjoille tyypillisiin piirteisiin. Volatiliteetin mallinnus tapahtuu autoregressiivistä konditionaalista heteroskedastista (ARCH) mallia sekä sen laajennuksia hyödyntäen. Työn johtopäätöksinä todetaan, että sähkömarkkinoiden volatiliteettia mallinnettaessa tulisi ottaa huomioon hinnan muutosten asymmetrinen vaikutus volatiliteettiin ja volatiliteetin kausittainen vaihtelu. Lisäksi todettiin, etteivätparametrien kertoimet ole vakioita pitkällä aikavälillä tarkasteltaessa volatiliteetin ARCH-mallinnuksessa.

Torque vibration model of axial-flux surface-mounted permanent magnet synchronous machine

In order that the radius and thus ununiform structure of the teeth and otherelectrical and magnetic parts of the machine may be taken into consideration the calculation of an axial flux permanent magnet machine is, conventionally, doneby means of 3D FEM-methods. This calculation procedure, however, requires a lotof time and computer recourses. This study proves that also analytical methods can be applied to perform the calculation successfully. The procedure of the analytical calculation can be summarized into following steps: first the magnet is divided into slices, which makes the calculation for each section individually, and then the parts are submitted to calculation of the final results. It is obvious that using this method can save a lot of designing and calculating time. Thecalculation program is designed to model the magnetic and electrical circuits of surface mounted axial flux permanent magnet synchronous machines in such a way, that it takes into account possible magnetic saturation of the iron parts. Theresult of the calculation is the torque of the motor including the vibrations. The motor geometry and the materials and either the torque or pole angle are defined and the motor can be fed with an arbitrary shape and amplitude of three-phase currents. There are no limits for the size and number of the pole pairs nor for many other factors. The calculation steps and the number of different sections of the magnet are selectable, but the calculation time is strongly depending on this. The results are compared to the measurements of real prototypes. The permanent magnet creates part of the flux in the magnetic circuit. The form and amplitude of the flux density in the air-gap depends on the geometry and material of the magnetic circuit, on the length of the air-gap and remanence flux density of the magnet. Slotting is taken into account by using the Carter factor in the slot opening area. The calculation is simple and fast if the shape of the magnetis a square and has no skew in relation to the stator slots. With a more complicated magnet shape the calculation has to be done in several sections. It is clear that according to the increasing number of sections also the result will become more accurate. In a radial flux motor all sections of the magnets create force with a same radius. In the case of an axial flux motor, each radial section creates force with a different radius and the torque is the sum of these. The magnetic circuit of the motor, consisting of the stator iron, rotor iron, air-gap, magnet and the slot, is modelled with a reluctance net, which considers the saturation of the iron. This means, that several iterations, in which the permeability is updated, has to be done in order to get final results. The motor torque is calculated using the instantaneous linkage flux and stator currents. Flux linkage is called the part of the flux that is created by the permanent magnets and the stator currents passing through the coils in stator teeth. The angle between this flux and the phase currents define the torque created by the magnetic circuit. Due to the winding structure of the stator and in order to limit the leakage flux the slot openings of the stator are normally not made of ferromagnetic material even though, in some cases, semimagnetic slot wedges are used. In the slot opening faces the flux enters the iron almost normally (tangentially with respect to the rotor flux) creating tangential forces in the rotor. This phenomenon iscalled cogging. The flux in the slot opening area on the different sides of theopening and in the different slot openings is not equal and so these forces do not compensate each other. In the calculation it is assumed that the flux entering the left side of the opening is the component left from the geometrical centre of the slot. This torque component together with the torque component calculated using the Lorenz force make the total torque of the motor. It is easy to assume that when all the magnet edges, where the derivative component of the magnet flux density is at its highest, enter the slot openings at the same time, this will have as a result a considerable cogging torque. To reduce the cogging torquethe magnet edges can be shaped so that they are not parallel to the stator slots, which is the common way to solve the problem. In doing so, the edge may be spread along the whole slot pitch and thus also the high derivative component willbe spread to occur equally along the rotation. Besides forming the magnets theymay also be placed somewhat asymmetric on the rotor surface. The asymmetric distribution can be made in many different ways. All the magnets may have a different deflection of the symmetrical centre point or they can be for example shiftedin pairs. There are some factors that limit the deflection. The first is that the magnets cannot overlap. The magnet shape and the relative width compared to the pole define the deflection in this case. The other factor is that a shifting of the poles limits the maximum torque of the motor. If the edges of adjacent magnets are very close to each other the leakage flux from one pole to the other increases reducing thus the air-gap magnetization. The asymmetric model needs some assumptions and simplifications in order to limit the size of the model and calculation time. The reluctance net is made for symmetric distribution. If the magnets are distributed asymmetrically the flux in the different pole pairs will not be exactly the same. Therefore, the assumption that the flux flows from the edges of the model to the next pole pairs, in the calculation model from one edgeto the other, is not correct. If it were wished for that this fact should be considered in multi-pole pair machines, this would mean that all the poles, in other words the whole machine, should be modelled in reluctance net. The error resulting from this wrong assumption is, nevertheless, irrelevant.

Analysis of the voltage source inverter with small DC-link capacitor

IIn electric drives, frequency converters are used to generatefor the electric motor the AC voltage with variable frequency and amplitude. When considering the annual sale of drives in values of money and units sold, the use of low-performance drives appears to be in predominant. These drives have tobe very cost effective to manufacture and use, while they are also expected to fulfill the harmonic distortion standards. One of the objectives has also been to extend the lifetime of the frequency converter. In a traditional frequency converter, a relatively large electrolytic DC-link capacitor is used. Electrolytic capacitors are large, heavy and rather expensive components. In many cases, the lifetime of the electrolytic capacitor is the main factor limiting the lifetime of the frequency converter. To overcome the problem, the electrolytic capacitor is replaced with a metallized polypropylene film capacitor (MPPF). The MPPF has improved properties when compared to the electrolytic capacitor. By replacing the electrolytic capacitor with a film capacitor the energy storage of the DC-linkwill be decreased. Thus, the instantaneous power supplied to the motor correlates with the instantaneous power taken from the network. This yields a continuousDC-link current fed by the diode rectifier bridge. As a consequence, the line current harmonics clearly decrease. Because of the decreased energy storage, the DC-link voltage fluctuates. This sets additional conditions to the controllers of the frequency converter to compensate the fluctuation from the supplied motor phase voltages. In this work three-phase and single-phase frequency converters with small DC-link capacitor are analyzed. The evaluation is obtained with simulations and laboratory measurements.

Vaihtosuuntauksen ja suodatuksen toteuttaminen tasasähkönjakeluverkossa

Pienjännitejakeluverkko Suomessa on toteutettu 400 V:n kolmivaiheisella vaihtosähköllä. Pienestä jännitteestä johtuen 20/0.4 kV:n muuntajat täytyy sijoittaa lähelle kuluttajaa, jotta siirtohäviöt eivät nouse liian suuriksi. Suuremman vaihto- tai tasajännitteen käyttö pienjännitejakelussa kasvattaisi verkon tehonsiirtokapasiteettia ja mahdollistaisi pidempien siirtomatkojen käytön. Käynnissä olevassa tutkimushankkeessa käsitellään vaihtoehtoa, jossa tasajännitettä käytettäisiin 20 kV:n verkon ja kuluttajan välisessä tehonsiirrossa ja kuluttajalla sijaitseva vaihtosuuntaaja muodostaisi tasasähköstä standardien mukaista yksi- tai kolmivaiheista vaihtosähköä. Tässä diplomityössä käsitellään tehoelektroniikan soveltamista kuluttajalle sijoitetussa vaihtosuuntaajassa. Työssä tarkastellaan yksivaiheisia invertteritopologioita, niiden ohjausta ja soveltamista erilaisissa vaihtosuuntaajaratkaisuissa sekä LC- ja LCL-suotimien soveltuvuutta invertterin lähtöjännitteen suodatukseen. Lisäksi esitellään erilaisia rakenneratkaisuja vaihtosuuntauksen toteutukseen ja tarkastellaan näiden järjestelmien vikatilanteita ja sähköturvallisuutta. Lopuksi käsitellään koko järjestelmän häviöitä ja hyötysuhdetta eri suodinkomponenteilla sekä kytkentätaajuuksilla ja esitellään laboratorioprototyyppi. Työssä saatiin selville, että puolisiltainvertteri ei sovellu suurten kondensaattorien vuoksi syöttämään verkkotaajuista kuormaa, vaan joudutaan käyttämään kokosiltainvertteriä. Kokosiltainvertterin ja LC- tai LCL-suotimen käsittävää kokonaisuutta tarkasteltaessa havaittiin, että pienimmät häviöt saavutetaan LC-suotimella 5 %:n ja LCL-suotimella 1 %:n särövaatimuksella. Hyötysuhdekäyrää tarkasteltaessa saatiin sama tulos läpi koko invertterin tehoalueen. Suotimen häviöiden tarkka laskenta on kuitenkin erittäin haasteellista, joten tulokset ovat suuntaa-antavia.

Henkilökohtaisen päätelaitteen käyttö lähimaksujärjestelmässä

Henkilökohtaista luotettavaa päätelaitetta voidaan käyttää maksuvälineenä langattomissa maksujärjestelmissä. Päätelaitteen luotettavuus saadaan aikaan sen sisältämien tietojen salauksen ja käyttäjän tunnistuksen avulla. Kaupankäynnin tietoturvan kannalta järjestelmien tärkeimpiä tehtäviä ovat osapuolten tunnistaminen ja tietoyhteyden suojaaminen. Tässä työssä esitellään automaatti- ja ruokalamaksamisen järjestelmä, jossa käytetään maksuvälineenä Bluetooth-ominaisuudella varustettua kämmentietokonetta. Henkilökohtaisen luotettavan päätelaitteen vaatimuksia ja uhkia käydään läpi. Samoin erilaisia menetelmiä käyttäjän ja laitteiden tunnistukseen sekä tietoyhteyden suojaamiseen. Käyttäjän tunnistus perustuu julkisten avainten varmenteisiin, joihin on sisällytetty tietoa niin asiakkaasta, maksuvälineestä kuin maksumenetelmästäkin. Maksumenetelmäksi on valittu tilien käyttö. Tietoyhteyden suojaamiseen käytetään epäsymmetristä salausta.

Market linkages and volatility spillover: evidence from BRIC countries

The aim of this study is to investigate volatility spillover-effect and market integration between BRIC countries. Motivated by existing literature of market integration between developed and emerging markets, we will investigate market linkages using multivariate asymmetric GARCH BEKK model. The increasing globalization of the financial markets and consequent higher volatility transfer between markets makes it more important to understand market integration between BRIC countries. We investigate the stock market integration and volatility transfer between the BRIC countries form 1998 to 2007, using daily data. The empirical results show that there are international diversification benefits among Brazil, Russia, China and India. U.S. influence to these countries has been week, even though U.S. economy has been leading the global financial markets. From Finnish point of view, diversification benefits are robust but we find some correlation with Russia and China.

Time-varying Risk Premiums and Conditional Market Risk: Empirical Evidence from European Stock Markets

This study investigates the relationship between the time-varying risk premiums and conditional market risk in the stock markets of the ten member countries of Economy and Monetary Union. Second, it examines whether the conditional second moments change over time and are there asymmetric effects in the conditional covariance matrix. Third, it analyzes the possible effects of the chosen testing framework. Empirical analysis is conducted using asymmetric univariate and multivariate GARCH-in-mean models and assuming three different degrees of market integration. For a daily sample period from 1999 to 2007, the study shows that the time-varying market risk alone is not enough to explain the dynamics of risk premiums and indications are found that the market risk is detected only when its price is allowed to change over time. Also asymmetric effects in the conditional covariance matrix, which is found to be time-varying, are clearly present and should be recognized in empirical asset pricing analyses.

Exits - Pääomasijoittajan irtautumisvaihtoehtojen juridista tarkastelua

Pääomasijoittaminen on Suomessa verrattain uusi ilmiö. Tutkielman tarkoitus on ollut tarkastella pääomasijoittajan irtautumista kohdeyhtiöstä juridisesta näkökulmasta. Tutkielman ydin on ollut selvittää pääomasijoittamisen toimijoiden roolien ja niistä johtuvien intressien ristiriitojen vaikutusta irtautumiseen sekä sitä, miten intressiristiriitoja vähennetään erityisesti pääomasijoittajan näkökulmasta. Teoreettisena viitekehyksenä on käytetty päämies-agenttiteoriaa sekä teoriaa asymmetrisestä tiedosta ja moraalisesta uhkapelistä. Toisena tutkimusongelmana on selvitetty pääomasijoittamisen sijoittumista eri oikeudenalojen yhtymäkohtaan sekä luotu katsaus yleisesti pääomasijoittamista koskevaan lainsäädäntöön. Keskeisenä tavoitteena on ollut selvittää, aiheuttaako amerikkalaiseen sopimusmalliin perustuva sopimuskäytäntö ongelmia suomalaisessa juridisessa ympäristössä. Tutkimus on oikeustaloustieteellinen ja tutkimuskohteeseen on tutustuttu alan koti- ja ulkomaisen tutkimuksen ja kirjallisuuden lisäksi teemahaastatteluin. Tutkielman loppupäätelmä on, että pääomasijoittajan irtautumisen turvaamiseksi käytetään juridisesti tehokkaita menetelmiä, joista osakassopimuksen ehdot ovat ennemminkin ennaltaehkäiseviä kuin korjaavia. Intressiristiriitaa vähentämään käytetään myös kannustinjärjestelmä (osakeomistusta, optio-oikeuksia). Tutkimuksessa ei havaittu merkittäviä ongelmia amerikkalaisen sopimusmallin soveltamisessa suomalaiseen käytäntöön.

Essays on pricing of risk and international linkage of Russian stock market

Last two decades have seen a rapid change in the global economic and financial situation; the economic conditions in many small and large underdeveloped countries started to improve and they became recognized as emerging markets. This led to growth in the amounts of global investments in these countries, partly spurred by expectations of higher returns, favorable risk-return opportunities, and better diversification alternatives to global investors. This process, however, has not been without problems and it has emphasized the need for more information on these markets. In particular, the liberalization of financial markets around the world, globalization of trade and companies, recent formation of economic and regional blocks, and the rapid development of underdeveloped countries during the last two decades have brought a major challenge to the financial world and researchers alike. This doctoral dissertation studies one of the largest emerging markets, namely Russia. The motivation why the Russian equity market is worth investigating includes, among other factors, its sheer size, rapid and robust economic growth since the turn of the millennium, future prospect for international investors, and a number of important major financial reforms implemented since the early 1990s. Another interesting feature of the Russian economy, which gives motivation to study Russian market, is Russia’s 1998 financial crisis, considered as one of the worst crisis in recent times, affecting both developed and developing economies. Therefore, special attention has been paid to Russia’s 1998 financial crisis throughout this dissertation. This thesis covers the period from the birth of the modern Russian financial markets to the present day, Special attention is given to the international linkage and the 1998 financial crisis. This study first identifies the risks associated with Russian market and then deals with their pricing issues. Finally some insights about portfolio construction within Russian market are presented. The first research paper of this dissertation considers the linkage of the Russian equity market to the world equity market by examining the international transmission of the Russia’s 1998 financial crisis utilizing the GARCH-BEKK model proposed by Engle and Kroner. Empirical results shows evidence of direct linkage between the Russian equity market and the world market both in regards of returns and volatility. However, the weakness of the linkage suggests that the Russian equity market was only partially integrated into the world market, even though the contagion can be clearly seen during the time of the crisis period. The second and the third paper, co-authored with Mika Vaihekoski, investigate whether global, local and currency risks are priced in the Russian stock market from a US investors’ point of view. Furthermore, the dynamics of these sources of risk are studied, i.e., whether the prices of the global and local risk factors are constant or time-varying over time. We utilize the multivariate GARCH-M framework of De Santis and Gérard (1998). Similar to them we find price of global market risk to be time-varying. Currency risk also found to be priced and highly time varying in the Russian market. Moreover, our results suggest that the Russian market is partially segmented and local risk is also priced in the market. The model also implies that the biggest impact on the US market risk premium is coming from the world risk component whereas the Russian risk premium is on average caused mostly by the local and currency components. The purpose of the fourth paper is to look at the relationship between the stock and the bond market of Russia. The objective is to examine whether the correlations between two classes of assets are time varying by using multivariate conditional volatility models. The Constant Conditional Correlation model by Bollerslev (1990), the Dynamic Conditional Correlation model by Engle (2002), and an asymmetric version of the Dynamic Conditional Correlation model by Cappiello et al. (2006) are used in the analysis. The empirical results do not support the assumption of constant conditional correlation and there was clear evidence of time varying correlations between the Russian stocks and bond market and both asset markets exhibit positive asymmetries. The implications of the results in this dissertation are useful for both companies and international investors who are interested in investing in Russia. Our results give useful insights to those involved in minimising or managing financial risk exposures, such as, portfolio managers, international investors, risk analysts and financial researchers. When portfolio managers aim to optimize the risk-return relationship, the results indicate that at least in the case of Russia, one should account for the local market as well as currency risk when calculating the key inputs for the optimization. In addition, the pricing of exchange rate risk implies that exchange rate exposure is partly non-diversifiable and investors are compensated for bearing the risk. Likewise, international transmission of stock market volatility can profoundly influence corporate capital budgeting decisions, investors’ investment decisions, and other business cycle variables. Finally, the weak integration of the Russian market and low correlations between Russian stock and bond market offers good opportunities to the international investors to diversify their portfolios.

Dimensioning DC-voltage capacitor for a DC-distribution system and dynamic analysis

Technical analysis of Low Voltage Direct Current (LVDC) distribution systems shows that in LVDC transmission the customer voltage quality is higher. One of the problems in LVDC distribution networks that converters both ends of the DC line are required. Because of the converters produce not pure DC voltage, but some fluctuations as well, the huge electrolytic capacitors are required to reduce voltage distortions in the DC-side. This thesis master’s thesis is focused on calculating required DC-link capacitance for LVDC transmission and estimation of the influence of different parameters on the voltage quality. The goal is to investigate the methods of the DC-link capacitance estimation and location in the transmission line.