Market Opportunities for Paper Industry in Radio Frequency Identification

The paper industry has been experiencing remarkable structural changes since paper demand growth has ceased and some markets are declining. One reason behind the declined demand is the Internet, which has partially substituted the newspaper as a source of information. Paper products alone can no longer provide livelihood, and the paper industry has to find new business areas. In this research, we studied radio frequency identification (RFID), and the market opportunities it could provide for paper industry. The research combined a quantitative industry analysis and qualitative interviews. RFID is a growing industry in the beginning of its life cycle, in which value chains and technologies still evolve significantly. The industry is going to concentrate on the future, and in the long term RFID-identifiers will probably be printed on paper substrate or directly onto products. Paper industry has the chance to enter the RFID industry, but it has to obtain the required competences, for example through acquisitions. The business potential RFID offers to paper industry is inadequate, and while reviewing new strategic options, the paper industry must consider more options, for example the entire printed intelligence.

Radio Frequency Measurement Method for Detecting Bearing Currents in Induction Motors

Induction motors are widely used in industry, and they are generally considered very reliable. They often have a critical role in industrial processes, and their failure can lead to significant losses as a result of shutdown times. Typical failures of induction motors can be classified into stator, rotor, and bearing failures. One of the reasons for a bearing damage and eventually a bearing failure is bearing currents. Bearing currents in induction motors can be divided into two main categories; classical bearing currents and inverter-induced bearing currents. A bearing damage caused by bearing currents results, for instance, from electrical discharges that take place through the lubricant film between the raceways of the inner and the outer ring and the rolling elements of a bearing. This phenomenon can be considered similar to the one of electrical discharge machining, where material is removed by a series of rapidly recurring electrical arcing discharges between an electrode and a workpiece. This thesis concentrates on bearing currents with a special reference to bearing current detection in induction motors. A bearing current detection method based on radio frequency impulse reception and detection is studied. The thesis describes how a motor can work as a “spark gap” transmitter and discusses a discharge in a bearing as a source of radio frequency impulse. It is shown that a discharge, occurring due to bearing currents, can be detected at a distance of several meters from the motor. The issues of interference, detection, and location techniques are discussed. The applicability of the method is shown with a series of measurements with a specially constructed test motor and an unmodified frequency-converter-driven motor. The radio frequency method studied provides a nonintrusive method to detect harmful bearing currents in the drive system. If bearing current mitigation techniques are applied, their effectiveness can be immediately verified with the proposed method. The method also gives a tool to estimate the harmfulness of the bearing currents by making it possible to detect and locate individual discharges inside the bearings of electric motors.

The radio frequency identification technology in the supply chain management: a case of a big logistics company

Nowadays global business trends force the adoption of innovative ICTs into the supply chain management (SCM). Particularly, the RFID technology is on high demand among SCM professionals due to its business advantages such as improving of accuracy and veloc-ity of SCM processes which lead to decrease of operational costs. Nevertheless, a question of the RFID technology impact on the efficiency of warehouse processes in the SCM re-mains open. The goal of the present study is to experiment the possibility of improvement order picking velocity in a warehouse of a big logistics company with the use of the RFID technology. In order to achieve this goal the following objectives have been developed: 1) Defining the scope of the RFID technology applications in the SCM; 2) Justification of the RFID technology impact on the SCM processes; 3) Defining a place of the warehouse order picking process in the SCM; 4) Identification and systematization of existing meth-ods of order picking velocity improvement; 5) Choosing of the study object and gathering of the empirical data about number of orders, number of hours spent per each order line daily during 5 months; 6) Processing and analysis of the empirical data; 7) Conclusion about the impact of the RFID technology on the speed of order picking process. As a result of the research it has been found that the speed of the order picking processes has not been changed as time has gone after the RFID adoption. It has been concluded that in order to achieve a positive effect in the speed of order picking process with the use of the RFID technology it is necessary to simultaneously implement changes in logistics and organizational management in 3PL logistics companies. Practical recommendations have been forwarded to the management of the company for further investigation and procedure.

Radio-frequency-based measurement methods for bearing current analysis in induction motors

The most common reason for a low-voltage induction motor breakdown is a bearing failure. Along with the increasing popularity of modern frequency converters, bearing failures have become the most important motor fault type. Conditions in which bearing currents are likely to occur are generated as a side effect of fast du/dt switching transients. Once present, different types of bearing currents can accelerate the mechanical wear of bearings by causing deformation of metal parts in the bearing and degradation of the lubricating oil properties.The bearing current phenomena are well known, and several bearing current measurement and mitigation methods have been proposed. Nevertheless, in order to develop more feasible methods to measure and mitigate bearing currents, better knowledge of the phenomena is required. When mechanical wear is caused by bearing currents, the resulting aging impact has to be monitored and dealt with. Moreover, because of the stepwise aging mechanism, periodically executed condition monitoring measurements have been found ineffective. Thus, there is a need for feasible bearing current measurement methods that can be applied in parallel with the normal operation of series production drive systems. In order to reach the objectives of feasibility and applicability, nonintrusive measurement methods are preferred. In this doctoral dissertation, the characteristics and conditions of bearings that are related to the occurrence of different kinds of bearing currents are studied. Further, the study introduces some nonintrusive radio-frequency-signal-based approaches to detect and measure parameters that are associated with the accelerated bearing wear caused by bearing currents.

Tuning the design procedures for laser processed microwave mechanics

This research has been focused at the development of a tuned systematic design methodology, which gives the best performance in a computer aided environment and utilises a cross-technological approach, specially tested with and for laser processed microwave mechanics. A tuned design process scheme is also presented. Because of the currently large production volumes of microwave and radio frequency mechanics even slight improvements of design methodologies or manufacturing technologies would give reasonable possibilities for cost reduction. The typical number of required iteration cycles could be reduced to one fifth of normal. The research area dealing with the methodologies is divided firstly into a function-oriented, a performance-oriented or a manufacturability-oriented product design. Alternatively various approaches can be developed for a customer-oriented, a quality-oriented, a cost-oriented or an organisation-oriented design. However, the real need for improvements is between these two extremes. This means that the effective methodology for the designers should not be too limited (like in the performance-oriented design) or too general (like in the organisation-oriented design), but it should, include the context of the design environment. This is the area where the current research is focused. To test the developed tuned design methodology for laser processing (TDMLP) and the tuned optimising algorithm for laser processing (TOLP), seven different industrial product applications for microwave mechanics have been designed, CAD-modelled and manufactured by using laser in small production series. To verify that the performance of these products meets the required level and to ensure the objectiveness ofthe results extensive laboratory tests were used for all designed prototypes. As an example a Ku-band horn antenna can be laser processed from steel in 2 minutes at the same time obtaining a comparable electrical performance of classical aluminium units or the residual resistance of a laser joint in steel could be limited to 72 milliohmia.

Wireless Applications Evaluation and Development Process: Case -Paper Industry Logistics

Sähköisen liiketoiminnan ja mobiliteetin konvergenssi yhdessä teknologisen innovaation kiihtyvän vauhdin kanssa ovat saaneet aikaan kiinnostusta langattomia liiketoimintaratkaisuja kohtaan. Tämän diplomityön tavoitteena oli tutkia sähköisen liiketoiminnan langattomien sovellusten arviointi- ja kehitysprosessia. Työ keskittyy tarkastelemaan paperiteollisuuden toimitusketjun langatonta seurantaa. Tutkimuksessa esitetään langattoman sähköisen liiketoiminnan määritelmä, kuvaillaan langattomuuden eri sovellusalueita ja sovellusten arviointi- ja kehitysprosessin strategisia sekä teknologisia ulottuvuuksia. Työ luo viitekehyksen, jonka avulla tarkastella langattomien teknologioiden merkitystä logistiikassa. Tutkimuksen merkittävin tulos on prosessimalli sovellusten arvioimiseksi ja kehittämiseksi. Mallilla kehitetty langaton sovellus osoittautui tarkastelussa hyödylliseksi toimitusketjun hallinnassa.

Digital Audio Broadcasting: Technology and Prospects

The subject of the thesis was the digital audio broadcasting technology developed in the Eureka project 147. The research was based on the literature on the subject. At first, some reasons for the digitisation of broadcasting technology were given. Next, the channel multiplexing and channel coding methods employed by digital radio were discussed. The design of these methods is based on certain phenomena related to the propagation of radio-frequency signals, and these phenomena were also described. After that, audio and data transfer mechanisms as well as the structure of digital radio network were explained. Furthermore, digital audio and data services were considered. Finally, the digital radio was examined from marketing and administrative aspects. From a merely technical point of view, the digital radio technology offers several improvements in comparison with analogue technology. However, the digital radio has not become as widespread as it was perhaps originally expected during its development.

Mobiiliteknologioiden hyödyntäminen rakennusteollisuudessa

Mobilding-hanke toteutettiin Lappeenrannan teknillisen yliopiston tietoliikennetekniikan laitoksella vuosien 2006 – 2008 aikana. Hankkeen alkuperäisenä tavoitteena oli selvittää, millä menetelmillä voidaan hallita rakennukseen liittyvät tiedot koko sen elinkaaren ajalta alkaen suunnittelusta, jatkuen läpi elementtivalmistuksen ja rakennusvaiheen sekä myöhemmin koko rakennuksen käyttöiän. Myöhemmin hankkeessa tehtiin kuitenkin elinkaaren osalta rajaus niin, että tarkasteltava elementtien elinkaari katsotaan alkavaksi rakennuksen suunnittelusta ja tarkasteltava elinkaari päättyy rakennuksen valmistumiseen, kun elementit ovat asennettu niille kuuluville paikoilleen ja jälkitarkastus on suoritettu. Yksi hankkeen johtavia ajatuksia oli aiemmin Etap II-hankkeen yhteydessä testatun RFID-etätunnistustekniikan (Radio Frequency Identification) hyödyntäminen rakennuselementtien tunnistamiseen. Kiinteänä osana tähän liittyy tiedon kerääminen ja sen hyödyntäminen mobiililaitteiden avulla. Tämä tieto voi olla esimerkiksi elementin dimensio-, paikka tai tilatietoa. Jotta tuotettavaa tietoa pystytään hyödyntämään ja jakamaan hankkeen muille osapuolille, toteutettiin keskitetty Mobilding-tietojärjestelmä, joka sisältää erillisiä rajapintoja myös muihin elementin ja rakennushankkeen elinkaaren aikana käytettäviin järjestelmiin.

Implementation and Integration of New Baggage Logistic Centre at HelsinkiVantaa Airport

This thesis deals with improving international airport baggage supply chain management (SCM) by means of information technology and new baggage handling system. This study aims to focus on supply chain visibility in practice and to suggest different ways to improve the supply chain performance through information sharing. The objective is also to define how radio frequency identification (RFID) and enterprise resource planning (ERP) can make processes more transparent. In order to get full benefits from processes, effective business process management and monitoring as well as the key performance indicators must be defined, implemented and visualized through e.g. dashboard views for different roles. As an outcome of the research the need for the use of information technology systems and more advanced technologies, e.g. RFID in the supply chain management is evident. Sophisticated ERP is crucial in boosting SCM business processes and profitability. This would be beneficial for dynamic decision making as well in the airport and airline supply chain management. In the long term, economic aspects support the actions I have suggested in order to make production more flexible in reacting to quick changes.

Antenna Design for Contactless IC Card Applications

Contactless integrated circuit cards are one form of application of radio frequency identification. They are used in applications such as access control, identification, and payment in public transport. The contactless IC cards are passive which means that both the data and the energy are transferred to the card without contact using inductive coupling. Antenna design and optimization of the design for contactless IC cards defined by ISO/IEC14443 is studied. The basic operation principles of contactless system are presented and the structure of contactless IC card is illustrated. The structure was divided between the contactless chip and the antenna. The operation of the antenna was covered in depth and the parameters affecting to the performance of the antenna were presented. Also the different antenna technologies and connection technologies were provided. The antenna design process with the parameters and the design tools isillustrated and optimization of the design is studied. To make the design process more ideal a target of development was discovered, which was the implementation of test application. The optimization of the antenna design was presented based on the optimization criteria defined in this study. The solution for the implementation of these criteria and the effect of each criterion was found. For enhancing the performance of the antenna a focus for future study was proposed.

Hiontarobotti-solun tietojärjestelmä

Hiontarobotteja käytetään nopeuttamaan hiontaprosessia ja vähentämään henkilöiden tarvetta tehdä kuluttavaa ja raskasta työtä. Yleensä hiottavat kappaleet ovat suuria, jolloin hionta robotillakin kestää kauan. Kun hiottavat kappaleet ovat pieniä, robotti hioo kappaleen nopeasti. Tällöin tarvitaan automaattinen varastointi, jotta hiontarobotti pystyy jatkamaan nopeasti seuraavan kappaleen hiontaa. Automaattinen varastointi tarvitsee tiedonhallintajärjestelmän, jolla hallitaan varastossa olevien kappaleiden tietoja. Hiottava kappale täytyy esimerkiksi pystyä tunnistamaan ennen hionnan aloittamista. Yhtenä tunnistusmenetelmänä voidaan käyttää radiotaajuudella toimivia RFID-tunnisteita. Kun kappale tunnistetaan ennen hiontaa niin voidaan varmistua, että robotti suorittaa oikean hiontaohjelman kappaleelle. Diplomityö liittyy Master Automation Groupin ensimmäiseen automaattista varastoa hyödyntävään FlexMill™-hiontarobotti-soluun. Työssä on suunniteltu ja toteutettu tietokanta ja siihen liittyvä tietojärjestelmä. Kehitettävä ohjelma toimii solun toiminnasta vastaavan soluohjaimen tiedonhallintaosana. Ohjelma hyödyntää RFID-laitteita kappaleiden tunnistuksessa.

Spin-Dynamics in Cold Gases of 87Rb and Atomic Hydrogen. The spins they are a-changin’

In this thesis the dynamics of cold gaseous atoms is studied. Two different atomic species and two different experimental techniques have been used. In the first part of the thesis experiments with Bose-Einstein condensates of Rb-87 are presented. In these experiments the methods of laser cooling and magnetic trapping of atoms were utilized. An atom chip was used as the experimental technique for implementation of magnetic trapping. The atom chip is a small integrated instrument allowing accurate and detailed manipulation of the atoms. The experiments with Rb-87 probed the behaviour of a falling beam of atoms outcoupled from the Bose-Einstein condensate by electromagnetic field induced spin flips. In the experiments a correspondence between the phases of the outcoupling radio frequency field and the falling beam of atoms was found. In the second part of the thesis experiments of spin dynamics in cold atomic hydrogen gas are discussed. The experiments with atomic hydrogen are conducted in a cryostat using a dilution refrigerator as the cooling method. These experiments concentrated on explaining and quantifying modulations in the electron spin resonance spectra of doubly polarized atomic hydrogen. The modifications to the previous experimental setup are described and the observation of electron spin waves is presented. The observed spin wave modes were caused by the identical spin rotation effect. These modes have a strong dependence on the spatial profile of the polarizing magnetic field. We also demonstrated confinement of these modes in regions of strong magnetic field and manipulated their spatial distribution by changing the position of the field maximum.

RFID-teknologia kulunvalvonnassa

Tämä kandidaatintutkielma on kirjallisuuskatsaus, joka käsittelee RFID-teknologian hyöndyntämistä kulunvalvonnassa. Työssä perehdytään pintapuolisesti itse teknologiaan, ja luodaan katsaus kulunvalvontaan. Työn pääaihe on kuitenkin kulunvalvonnan ja RFID:n yhdistyminen: miten RFID:tä hyödynnetään kulunvalvonnan toteutuksissa ympäri maailmaa. Työssä tarkastellaan RFID:n vahvuuksia, sekä heikkouksia kulunvalvonnan suhteen. Tämän lisäksi pyritään luomaan kuva nykyisistä ja tulevista implementaatioista. Viimeinen tärkeä työn osa-alue on turvallisuus. RFID:tä käytetään korkeankin turvatason kulunvalvontaratkaisuissa ja tällöin turvallisuuden maksimoiminen on ensiarvoisen tärkeää.

Power Electronic Converters in Low-Voltage Direct Current Distribution – Analysis and Implementation

Over the recent years, smart grids have received great public attention. Many proposed functionalities rely on power electronics, which play a key role in the smart grid, together with the communication network. However, “smartness” is not the driver that alone motivates the research towards distribution networks based on power electronics; the network vulnerability to natural hazards has resulted in tightening requirements for the supply security, set both by electricity end-users and authorities. Because of the favorable price development and advancements in the field, direct current (DC) distribution has become an attractive alternative for distribution networks. In this doctoral dissertation, power electronic converters for a low-voltage DC (LVDC) distribution system are investigated. These include the rectifier located at the beginning of the LVDC network and the customer-end inverter (CEI) on the customer premises. Rectifier topologies are introduced, and according to the LVDC system requirements, topologies are chosen for the analysis. Similarly, suitable CEI topologies are addressed and selected for study. Application of power electronics into electricity distribution poses some new challenges. Because the electricity end-user is supplied with the CEI, it is responsible for the end-user voltage quality, but it also has to be able to supply adequate current in all operating conditions, including a short-circuit, to ensure the electrical safety. Supplying short-circuit current with power electronics requires additional measures, and therefore, the short-circuit behavior is described and methods to overcome the high-current supply to the fault are proposed. Power electronic converters also produce common-mode (CM) and radio-frequency (RF) electromagnetic interferences (EMI), which are not present in AC distribution. Hence, their magnitudes are investigated. To enable comprehensive research on the LVDC distribution field, a research site was built into a public low-voltage distribution network. The implementation was a joint task by the LVDC research team of Lappeenranta University of Technology and a power company Suur-Savon S¨ahk¨o Oy. Now, the measurements could be conducted in an actual environment. This is important especially for the EMI studies. The main results of the work concern the short-circuit operation of the CEI and the EMI issues. The applicability of the power electronic converters to electricity distribution is demonstrated, and suggestions for future research are proposed.

Tunable lumped-element bandpass filters for Cognitive Radio application

In this thesis the design of bandpass filters tunable at 400 MHz – 800 MHz was under research. Microwave filters are vital components which provide frequency selectivity in wide variety of electronic systems operating at high frequencies. Due to the occurrence of multi-frequency bands communication and diverse applications of wireless devices, requirement of tunable filters exists. The one of potential implementation of frequency-agile filters is frontends and spectrum sensors in Cognitive Radio (CR). The principle of CR is to detect and operate at a particular available spectrum without interfering with the primary user’s signals. This new method allows improving the efficiency of utilizing allocated spectrum such as TV band (400 MHz – 800 MHz). The focus of this work is development of sufficiently compact, low cost tunable filters with quite narrow bandwidth using currently available lumped-element components and PCB board technology. Filter design, different topologies and methods of tuning of bandpass filters are considered in this work. As a result, three types of topologies of bandpass filter were simulated and realised. They use digitally tunable capacitors (DTCs) for adjusting central frequency at TV "white space" spectrum. Measurements revealed that schematics presented in this work have proper output response and filters are successfully tuned by DTCs.