Alternative Energy Conversion Systems for a Micro Scale Wind Turbine

This Master's thesis deals with a Micro Scale Wind Wind Turbine application. The thesis consists of nine chapters. The first chapter is an introduction to the philosophy of a small scale wind turbine application. The second defines concepts, and lists the requirements. The third presents the whole application for an On-Grid , and for an Off-Grid arrangement, with main concentration on lighting, heating, and energy storage. The fourth deals with the Inverter's technology, which are used for the conversion of the produced power. The fifth chapter presents the available storage technology and it's possibilities. The sixth deals with the system, and the technological means used for the implementation. The seventh presents the PLC device, which was used as the controller for the management of the whole application. The eighth deals with the concept and the control application philosophy that the PLC involves. And the final chapter presents conclusions and ideas for further considerations.

Akku ja vetypolttokenno sähköauton voimanlähteenä

Tässä kandidaatintyössä on käsitelty akkuja ja vetypolttokennoja sähköauton voimanlähteenä. Työssä on esitelty sähköautojen ja niiden voimanlähteiden teknologioiden periaatteita, energiankantajia, hyötysuhteita ja päästöjä. Lisäksi on tarkasteltu polttomoottorikäyttöisiä autotekniikoita vertailukohdan saamiseksi. Työn lopuksi on analysoitu sähköautojen markkinoita ja niiden yleistymiseen vaikuttavia tekijöitä. Sähköautot mahdollistavat vaihtoehtoisten energialähteiden käytön, joka antaa tilaisuuden saasteiden ja päästöjen keskitettyyn vähentämiseen ja talteenottoon. Niiden avulla päästään myös pois öljyriippuvuudesta ja paikallisesti aiheutuneista päästöistä. Nykyisten polttoaineiden helpon käsiteltävyyden, kohtuullisien energiatiheyksien ja laajojen infrastruktuurien vuoksi käytössä olevien tekniikoiden syrjäyttäminen on vaikeaa. Uusien tekniikoiden etuja ja haittoja voidaan tarkastella yksinkertaisilla metodeilla, kuten kustannusten, hyötysuhteiden, päästöjen ja polttoaineiden elinkaarien vertailulla. Vertailua vaikeuttaa tosin hintatasojen ja verotuksen eroavaisuudet eri maissa, ja se on siksi suoritettava osin maakohtaisesti. Suurimpia esteitä uusille tekniikoille ovat tällä hetkellä niiden tuomat lisäkustannukset, infrastruktuurien puuttuminen ja nykyisten polttoaineiden korvaaminen toisella.

Etelä-Karjalan energiaselvitys ja maakunnan energiatalouden tulevaisuus

Diplomityössä on selvitetty Etelä-Karjalan maakunnan energian käyttöä nyt ja tulevaisuudessa. Tavoitteena on selvittää eri energialähteiden hankintavaihtoehtoja, sekä eri energialähteiden käytön kehittymissuunnat seuraavan 10 - 20 vuoden kuluessa. Diplomityö on tehty Etelä-Karjalan liiton toimeksiannosta ja sitä tullaan käyttämään taustaselvityksenä maakuntakaavan laadinnassa sekä maakunnan aluevarauksia määriteltäessä. Tarkoituksena on arvioida miten energiahuollon rakenne tulee muuttumaan tulevaisuudessa ja mikä merkitys tulevaisuuden energiaratkaisuilla on alueiden käyttöön ja aluerakenteeseen liittyen. Etelä-Karjala on osa Euroopan suurinta metsäteollisuuskeskittymää ja maakunta on Suomen suurimpia teollisuuden energian- ja sähkönkäyttäjiä. Etelä-Karjalan vahva metsäteollisuus ja sen käyttämät puupolttoaineet sekä sijainti Venäjän maakaasuvarojen läheisyydessä ja kattava maakaasuverkko vaikuttavat merkittävästi maakunnan energiataseeseen. Vuonna 2007 Etelä-Karjalan primäärienergiankäyttö oli 24,3 TWh, tästä uusiutuvien energialähteiden osuus oli 68 % ja fossiilisten energialähteiden osuus 22 %. Etelä-Karjalan energiatalouden tulevaisuuteen vaikuttaa merkittävästi maakunnan metsäteollisuuden tulevaisuus. Tiukentuvan energia- ja ilmastopolitiikan ja ympäristömääräysten myötä maakunnan energiatehokkuutta on parannettava kaikilla sektoreilla. Maakunnan energiankulutusta voidaan vähentää tehostamalla energiantuotantoa, tiivistämällä yhdyskuntarakennetta ja lisäämällä bioenergian käyttöä energiantuotannossa. Etelä-Karjalassa on myös potentiaalia lisätä vaihtoehtoisten energialähteiden osuutta maakunnan energiatalouden tulevaisuudessa.

Finnish cleantech SMEs in China: Challenges and solutions

The rapid economic growth in China has resulted in environmental challenges ranging from air pollution to water-related issues. Thus supporting clean technology, or cleantech, that encompasses industries that focus on alternative energy, pollution and recycling, power supplies and conservation has become one of the focal points in the Chinese economic policy for the next decade. Simultaneously, the Finnish government has initiated programs to support the internationalisation of domestic cleantech companies in an attempt to spiral the industry into one of the pillars of Finnish economic growth. This study concentrates on the conjunction of these two themes and studies the challenges faced by Finnish cleantech SMEs in the Chinese market. Consequently, the study answers the following sub questions: 1. What human and financial resource-based challenges do Finnish cleantech SMEs face in the Chinese market and what are their solutions? 2. What knowledge-based challenges do Finnish cleantech SMEs face in the Chinese market and how can these difficulties be resolved? 3. What network-based challenges do Finnish cleantech SMEs face in the Chinese market, how do they relate to the resource- and knowledge-based challenges, and how can these difficulties be resolved? This qualitative study is conducted by analysing four semi structured interviews collected from four Finnish SMEs that operate in China. The findings of the study indicate that in human resources the most important challenges are related to the hiring and retaining of employees. In contrast to extant academic literature results distinguish salary and social status as the main solutions to this challenge. Regarding financial resources it is discovered that cleantech companies enjoy a benign business environment in China and benefit from the Chinese government’s support for cleantech industry. Challenges related to knowledge resources can be grouped into categories with the most interesting knowledge flows being the stream of local market knowledge into to the foreign parent company and the outward flow of manufacturing and business practice information into the target venture. The challenge related to the first flow is gathering relevant information and the main solutions are clustering at the foreign location and hiring knowledge prior to internationalisation. Regarding the second flow the main challenge is related to intellectual property rights and the most interesting solution is the purposeful transformation of explicit knowledge into tacit knowledge. Finally, it is discovered that networks, called guanxi in China, greatly affect the business processes. Within the guanxi system there is the concept of face which was found to affect employee propensity to stay as well as, as a novel academic result, employees’ knowledge sharing intention.

Ruostumattoman teräksen käyttö ja käyttövaatimukset LNG:n varasto- ja kuljetusjärjestelmissä

On arvioitu, että koko maailmaa kattava energiantarve nousee 1,2 % vuosinopeudella. Asiaa ei kaunista se tosiasia, että valtaosa tänä päivänä tuotetusta energiasta (85 %) on lähtöisin fossiilisista polttoaineista. Päästöjen on arvioitu lisääntyvän 2005 – 2030 välisenä aikana noin 30 %, vaikka uusiutuvaa energiaa käytettäisiin ja prosessien hyötysuhteet paranisivat. Vuonna 2015 voimaan tuleva rikkidirektiivi on pakottanut asiantuntijat löytämään korvaavan energialähteen, joka vähentäisi päästöjen määrää, ja jota esiintyisi suurissa määrissä. Nesteytetty maakaasu, LNG, toteuttaa edellä mainitut ehdot. Tässä diplomityössä perehdytään LNG-teollisuuden arvoketjuun Suomessa sekä muualla maailmassa. Työssä pääpainona on selvittää ruostumattoman teräksen käyttömahdollisuuksia nykyisessä LNG-teollisuuden arvoketjussa sekä selvittää sen uusia sovelluskohteita LNG-alalla tulevaisuudessa. Diplomityössä on tehty laaja kirjallisuuskatsaus LNG:n arvoketjuun ja uuden EN 1.4420 ruostumattoman teräksen soveltuvuuteen kryogeenisissä lämpötiloissa. Työn aikana on myös tehty useita haastatteluja LNG-teollisuudessa toimivien henkilöiden kanssa. Menetelmäkokeita ja koehitsauksia on suoritettu näiden haastattelujen perusteella.

Experimentation on Wind Powered Hydraulic Heating System

It is common knowledge of the world’s dependency on fossil fuel for energy, its unsustainability on the long run and the changing trend towards renewable energy as an alternative energy source. This aims to cut down greenhouse gas emission and its impact on the rate of ecological and climatic change. Quite remarkably, wind energy has been one of many focus areas of renewable energy sources and has attracted lots of investment and technological advancement. The objective of this research is to explore wind energy and its application in household heating. This research aims at applying experimental approach in real time to study and verify a virtually simulated wind powered hydraulic house heating system. The hardware components comprise of an integrated hydraulic pump, flow control valve, hydraulic fluid and other hydraulic components. The system design and control applies hardware in-the-loop (HIL) simulation setup. Output signal from the semi-empirical turbine modelling controls the integrated motor to generate flow. Throttling the volume flow creates pressure drop across the valve and subsequently thermal power in the system to be outputted using a heat exchanger. Maximum thermal power is achieved by regulating valve orifice to achieve optimum system parameter. Savonius rotor is preferred for its low inertia, high starting torque and ease of design and maintenance characteristics, but lags in power efficiency. A prototype turbine design is used; with power output in range of practical Savonius turbine. The physical mechanism of the prototype turbine’s augmentation design is not known and will not be a focus in this study.

Building Strong Brands with Sponsorship: Case Battery Energy Drink

Tutkimuksen päätavoitteena oli ymmärtää vahvojen brändien ja brändipääoman rakentamisprosessia, painottaen erityisesti sponsoroinnin roolia tässä prosessissa. Tutkimus suoritettiin laadullisena tutkimuksena, jossa käytettiintapaustutkimusmenetelmää. Tutkimuksen aineisto kerättiin suurimmista online artikkelitietokannoista sekä kolmesta henkilökohtaisesta haastattelusta case-yrityksen edustajien kanssa. Tutkimuksen teoreettisen perustan muodosti brändipääoma-käsite ja sen osa-alueet, näiden liittyminen vahvoihin brändeihin ja brändien rakentamiseen, sekä sponsoroinnin strateginen käyttö brändien rakentamisessa. Lisäksi tutkimuksen empiirinen perusta arvio ja testasi näitä oletuksia ja aikaisemmin käsiteltyjä teorioita case-brändi Battery energiajuoman valossa. Tutkimus osoitti, että nykypäivänä kovan kilpailun markkinointiympäristössä, sponsorointi edustaa vaihtoehtoista tapaa rakentaa vahvoja, omalaatuisia ja suotuisia brändejä, joilla on korkea brändipääoma. Sponsoroinnista on tullut yhä tärkeämpi kommunikointiväline brändien rakentamisessa ja erityisesti siellä missä perinteiset menetelmät ovat muuttumassa tehottomiksi. Empiirisessä osassa selvisi, että sponsorointia on käytetty menestyksekkäästi strategisena keinona vahvan ja omalaatuisen Battery brändin ja sen korkean brändipääoman rakentamisessa.

Active Damping and Energy Recovery in a Hydraulic Boom Controlled by an Electric Drive

The aim of the study is to obtain a mathematical description for an alternative variant of controlling a hydraulic circuit with an electrical drive. The electrical and hydraulic systems are described by basic mathematical equations. The flexibilities of the load and boom is modeled with assumed mode method. The model is achieved and proven with simulations. The controller is constructed and proven to decrease oscillations and improve the dynamic response of the system.

Sustainable Waste-to-Energy Production: Performance Evaluation of Distributed Generation fuelled by Landfill Gas

The environmental impact of landfill is a growing concern in waste management practices. Thus, assessing the effectiveness of the solutions implemented to alter the issue is of importance. The objectives of the study were to provide an insight of landfill advantages, and to consolidate landfill gas importance among others alternative fuels. Finally, a case study examining the performances of energy production from a land disposal at Ylivieska was carried out to ascertain the viability of waste to energy project. Both qualitative and quantitative methods were applied. The study was conducted in two parts; the first was the review of literatures focused on landfill gas developments. Specific considerations were the conception of mechanism governing the variability of gas production and the investigation of mathematical models often used in landfill gas modeling. Furthermore, the analysis of two main distributed generation technologies used to generate energy from landfill was carried out. The review of literature revealed a high influence of waste segregation and high level of moisture content for waste stabilization process. It was found that the enhancement in accuracy for forecasting gas rate generation can be done with both mathematical modeling and field test measurements. The result of the case study mainly indicated the close dependence of the power output with the landfill gas quality and the fuel inlet pressure.

Energy Supply of Detached Houses in Russia and Finland

The problem of choosing the heating system is always relevant when building new houses. Type of energy source (solid fuel, liquid fuel, gas, electricity, alternative sources) is the main issue in choosing the heating system. The work gives a comprehensive overview of heating methods, determines their advantages and disadvantages taking into account economical and ecological situations in Finland and Russia. Quantitative contribution of single Finnish and Russian detached houses in the overall level of carbon dioxide emissions is estimated when using each method. Comparison of Russian and Finnish energy markets and their impact on electricity pricing is made in the work. The influence of air pollution on environmental offsets according to Russian and Finnish legislative and normative acts is determined.

Choosing the optimal energy system for buildings and districts

The purpose of this master’s thesis was to develop a method to be used in the selection of an optimal energy system for buildings and districts. The term optimal energy system was defined as the energy system which best fulfils the requirements of the stakeholder on whose preferences the energy systems are evaluated. The most influential stakeholder in the process of selecting an energy system was considered to be the district developer. The selection method consisted of several steps: Definition of the district, calculating the energy consumption of the district and buildings within the district, defining suitable energy system alternatives for the district, definition of the comparing criteria, calculating the parameters of the comparing criteria for each energy system alternative and finally using a multi-criteria decision method to rank the alternatives. For the purposes of the selection method, the factors affecting the energy consumption of buildings and districts and technologies enabling the use of renewable energy were reviewed. The key element of the selection method was a multi-criteria decision making method, PROMETHEE II. In order to compare the energy system alternatives with the developed method, the comparing criteria were defined in the study. The criteria included costs, environmental impacts and technological and technical characteristics of the energy systems. Each criterion was given an importance, based on a questionnaire which was sent for the steering groups of two district development projects. The selection method was applied in two case study analyses. The results indicate that the selection method provides a viable and easy way to provide the decision makers alternatives and recommendations regarding the selection of an energy system. Since the comparison is carried out by changing the alternatives into numeric form, the presented selection method was found to exclude any unjustified preferences over certain energy systems alternatives which would affect the selection.

Developing markets of energy biomass – local and global perspectives

The thesis explores global and national-level issues related to the development of markets for biomass for energy. The thesis consists of five separate papers and provides insights on selected issues. The aim of Paper I was to identify methodological and statistical challenges in assessing international solid and liquid biofuels trade and provide an overview of the Finnish situation with respect to the status of international solid and liquid biofuels trade. We found that, for the Finnish case, it is possible to qualify direct and indirect trade volumes of biofuels. The study showed that indirect trade of biofuels has a highly significant role in Finland and may be a significant sector also in global biofuels trade. The purpose of Paper II was to provide a quantified insight into Finnish prospects for meeting the national 2020 renewable energy targets and concurrently becoming a largescale producer of forest-biomass-based second-generation biofuels for feeding increasing demand in European markets. We found that Finland has good opportunities to realise a scenario to meet 2020 renewable energy targets and for large-scale production of wood-based biofuels. The potential net export of transport biofuels from Finland in 2020 would correspond to 2–3% of European demand. Paper III summarises the global status of international solid and liquid biofuels trade as illuminated by several separate sources. International trade of biofuels was estimated at nearly 1 EJ for 2006. Indirect trade of biofuels through trading of industrial roundwood and material by-products comprises the largest proportion of the trading, with a share of about two thirds. The purpose of Paper IV was to outline a comprehensive picture of the coverage of various certification schemes and sustainability principles relating to the entire value-added chain of biomass and bioenergy. Regardless of the intensive work that has been done in the field of sustainability schemes and principles concerning use of biomass for energy, weaknesses still exist. The objective of Paper V was to clarify the alternative scenarios for the international biomass market until 2020 and identify the underlying steps needed toward a wellfunctioning and sustainable market for biomass for energy purposes. An overall conclusion drawn from this analysis concerns the enormous opportunities related to the utilisation of biomass for energy in the coming decades.

Cyanobacteria from the Baltic Sea and Finnish lakes as an energy source and modulators of bioenergetic pathways

Cyanobacteria are a diverse group of oxygenic photosynthetic bacteria that inhabit in a wide range of environments. They are versatile and multifaceted organisms with great possibilities for different biotechnological applications. For example, cyanobacteria produce molecular hydrogen (H2), which is one of the most important alternatives for clean and sustainable energy. Apart from being beneficial, cyanobacteria also possess harmful characteristics and may become a source of threat to human health and other living organisms, as they are able to form surface blooms that are producing a variety of toxic or bioactive compounds. The University of Helsinki Culture Collection (UHCC) maintains around 1,000 cyanobacterial strains representing a large number of genera and species isolated from the Baltic Sea and Finnish lakes. The culture collection covers different life forms such as unicellular and filamentous, N2-fixing and non-N2-fixing strains, and planktonic and benthic cyanobacteria. In this thesis, the UHCC has been screened to identify potential strains for sustainable biohydrogen production and also for strains that produce compounds modifying the bioenergetic pathways of other cyanobacteria or terrestrial plants. Among the 400 cyanobacterial strains screened so far, ten were identified as high H2-producing strains. The enzyme systems involved in H2 metabolism of cyanobacteria were analyzed using the Southern hybridization approach. This revealed the presence of the enzyme nitrogenase in all strains tested, while none of them are likely to have contained alternative nitrogenases. All the strains tested, except for two Calothrix strains, XSPORK 36C and XSPORK 11A, were suggested to contain both uptake and bidirectional hydrogenases. Moreover, 55 methanol extracts of various cyanobacterial strains were screened to identify potent bioactive compounds affecting the photosynthetic apparatus of the model cyanobacterium, Synechocystis PCC 6803. The extract from Nostoc XPORK 14A was the only one that modified the photosynthetic machinery and dark respiration. The compound responsible for this effect was identified, purified, and named M22. M22 demonstrated a dual-action mechanism: production of reactive oxygen species (ROS) under illumination and an unknown mechanism that also prevailed in the dark. During summer, the Baltic Sea is occupied by toxic blooms of Nodularia spumigena (hereafter referred to as N. spumigena), which produces a hepatotoxin called nodularin. Long-term exposure of the terrestrial plant spinach to nodularin was studied. Such treatment resulted in inhibition of growth and chlorosis of the leaves. Moreover, the activity and amount of mitochondrial electron transfer complexes increased in the leaves exposed to nodularin-containing extract, indicating upregulation of respiratory reactions, whereas no marked changes were detected in the structure or function of the photosynthetic machinery. Nodularin-exposed plants suffered from oxidative stress, evidenced by oxidative modifications of various proteins. Plants initiated strategies to combat the stress by increasing the levels of alpha-tocopherol, mitochondrial alternative oxidase (AOX), and mitochondrial ascorbate peroxidase (mAPX).

Alternative liquid biofuels for lime kilns

Causticizing plant is an important part of kraft pulp mill. It uses green liquor from recovery boiler as a raw material and consumes lime to produce white liquor, which is an important chemical used in pulping. Lime kiln is a part of the causticizing process. It is used to convert lime mud, a by-product obtained from the causticizing back to lime in high temperatures. This conversion requires a lot of energy. The most common fuels used as energy source for lime kiln are heavy fuel oil and natural gas. In a modern pulp mill lime kiln is the only user of significant amount of fossil fuels. Replacing fossil fuels with biofuels can have prominent economical and environmental benefits. Interest in using biofuels as energy source of lime kiln has become a worldwide issue in the recent years. However fuels used for lime kiln have a lot of certain requirements. The purpose of this work is to study the required characteristics from liquid fuels used in pulp mill lime kiln and to map suitable liquid biofuels already available in the markets. Also taxation of liquid biofuels compared to heavy fuel oil in Finland, Sweden and Germany is shortly introduced.

Waste-to-Energy Scenarios in the China Context

Waste incineration plants are increasingly established in China. A low heating value and high moisture content, due to a large proportion of biowaste in the municipal solid waste (MSW), can be regarded as typical characteristics of Chinese MSW. Two incineration technologies have been mainly established in China: stoker grate and circular fluidized bed (CFB). Both of them are designed to incinerate mixed MSW. However, there have been difficulties to reach the sufficient temperature in the combustion process due to the low heating value of the MSW. That is contributed to the usage of an auxiliary fossil fuel, which is often used during the whole incineration process. The objective of this study was to design alternative Waste-to-energy (WTE) scenarios for existing WTE plants with the aim to improve the material and energy efficiency as well as the feasibility of the plants. Moreover, the aim of this thesis was to find the key factors that affect to the feasibility of the scenarios. Five different WTE plants were selected as study targets. The necessary data for calculation was gained from literature as well as received from the operators of the target WTE plants. The created scenarios were based on mechanical-biological treatment (MBT) technologies, in which the produced solid recovered fuel (SRF) was fed as an auxiliary fuel into a WTE plant replacing the fossil fuel. The mechanically separated biowaste was treated either in an anaerobic digestion (AD) plant, a biodrying plant, a thermal drying plant, or a combined AD plant + thermal drying plant. An interactive excel spreadsheet based computation tool was designed to estimate the viability of the scenarios in different WTE cases. The key figures of the improved material and energy efficiency, such as additional electricity generated and avoided waste for landfill, were got as results. Furthermore, economic indicators such as annual profits (or costs), payback period, and internal rate of return (IRR) were gained as results. The results show that the AD scenario was the most profitable in most of the cases. The current heating value of MSW and the tipping fee for the received MSW appeared as the most important factor in terms of feasibility.