Water circulations for effective bleaching of high-brightness mechanical pulps

The amount of water available is usually restricted, which leads to a situation where a complete understanding of the process, including water circulations and the influence of water components, is essential. The main aim of this thesis was to clarify the possibilities for the efficient use of residual peroxide by means of water circulation rearrangements. Rearranging water circulations and the reduction of water usage may cause new problems, such as metal induced peroxide decomposition that needs to be addressed. This thesis introduces theoretical methods of water circulations to combine two variables; effective utilization of residual peroxide and avoiding manganese in the alkaline peroxide bleaching stage. Results are mainly based on laboratory and mill site experiments concerning the utilization of residual peroxide. A simulation model (BALAS) was used to evaluate the manganese contents and residual peroxide doses. It was shown that with optimum recirculation of residual peroxide the brightness can be improved or chemical costs can be decreased. From the scientific perspective, it was also very important to discover that recycled peroxide was more effective pre-bleaching agent compared to fresh peroxide. This can be due to the organic acids i.e. per acetic acid in wash press filtrate that have been formed in alkaline bleaching stage. Even short retention time was adequate and the activation of residual peroxide using sodium hydroxide was not necessary. There are several possibilities for using residual peroxide in practice regarding bleaching. A typical modern mechanical pulping process line consist of defibering, screening, a disc filter, a bleach press, high consistency (HC) peroxide bleaching and a wash press. Furthermore there usually is not a particular medium consistency (MC) pre-bleaching stage that includes additional thickening equipment. The most advisable way to utilize residual peroxide in this kind of process is to recycle the wash press filtrate to the dilution of disc filter pulp (low MC pre-bleaching stage). An arrangement such as this would be beneficial in terms of the reduced convection of manganese to the alkaline bleaching stage. Manganese originates from wood material and will be removed to the water phase already in the early stages of the process. Recycling residual peroxide prior to the disc filter is not recommended because of low consistencies. Regarding water circulations, the novel point of view is that, it would be beneficial to divide water circulations into two sections and the critical location for the division is the disc filter. Both of these two sections have their own priority. Section one before the disc filter: manganese removal. Section two after the disc filter: brightening of pulp. This division can be carried out if the disc filter pulp is diluted only by wash press filtrate before the MC storage tower. The situation is even better if there is an additional press after the disc filter, which will improve the consistency of the pulp. This has a significant effect on the peroxide concentration in the MC pre-bleaching stage. In terms of manganese content, it is essential to avoid the use of disc filter filtrate in the bleach press and wash press showers. An additional cut-off press would also be beneficial for manganese removal. As a combination of higher initial brightness and lower manganese content, the typical brightness increase varies between approximately 0.5 and 1% ISO units after the alkaline peroxide bleaching stage. This improvement does not seem to be remarkable, but as it is generally known, the final brightness unit is the most expensive and difficult to achieve. The estimation of cost savings is not unambiguous. For example in GW/TMP mill case 0.6% ISO units higher final brightness gave 10% savings in the costs of bleaching chemicals. With an hypothetical 200 000 ton annual production, this means that the mill could save in the costs of bleaching chemicals more than 400 000 euros per year. In general, it can be said that there were no differences between the behavior of different types of processes (GW, PGW, TMP and BCTMP). The enhancement of recycling gave a similar response in all cases. However, we have to remember that the utilization of residual peroxide in older mills depends a great deal on the process equipment, the amount of water available and existing pipeline connections. In summary, it can be said that processes are individual and the same solutions cannot be applied to all cases.

Optimization of energy in a pulp mill

This study presents examination of ways to increase power generation in pulp mills. The main purpose was to identify and verify the best ways of power generation growth. The literature part of this study presented operation of energy pulp mill departments, energy consumption and generation by the recovery and power boilers. The second chapter of this part described the main directions for increase of electricity generation rise of black liquor dry solid content, increase of main steam parameters, flue gas heat recovery technologies, feed water and combustion air preheating. The third chapter of the literature part presented possible technical, environment and corrosion risks appeared from described alternatives. In the experimental part of this study, calculations and results of possible models with alternatives was presented. The possible combinations of alternatives were generated in 44 `models of energy pulp mill. The target of this part was define extra electricity generation after alternatives using and estimate profitability of generated models. The calculations were made by computer programme PROSIM. In the conclusions, the results were estimated on the basis of extra electricity generation and equipment design data of models. The profitability of cases was verified by their payback periods and additional incomes.

Vaihtelun vähentäminen kehäpyörien kovasorvauksen vaiheajoissa

Tämän työn tarkoituksena oli selvittää miksi kohdeyrityksen erään avainkomponentin, kehäpyörän, kovasorvauksen vaiheajoissa on niin paljon vaihtelua ja kuinka sitä saataisiin vähennettyä. Samalla pyrittiin lyhentämään keskimääräisiä vaiheaikoja. Tutkimus aloitettiin tuotannon nykytilan kartoituksella, jossa selvitettiin yrityksen toimintatapoja ja tuotannon tehokkuutta heikentäviä ongelmia. Tämän jälkeen aloitettiin varsinainen kehitysprojekti, joka perustui Lean-ajatteluun. Lean-ajattelu on tuotannon kehittämiseen tähtäävä filosofia, jossa pyritään tekemään enemmän vähemmällä, poistamalla tuotannosta kaikki ylimääräinen arvoa lisäämätön toiminta. Tuotantoon pyritään saamaan aikaiseksi tuotteiden jatkuva virtaus tuotantoa tahdistamalla. Erinomaisuutta tavoitellaan jatkuvalla parantamisella. Kohdeyrityksen tuotannon ongelmien tarkemmaksi selvittämiseksi toteutettiin erilaisia seurantoja, niin paikan päällä tuotannossa, kuin automaattista tiedonkeruuohjelmistoa hyväksi käyttäen. Seurantojen tuloksena selvisi, että pääsyyt tuotannon vaiheaikojen vaihteluun löytyvät teknisen järjestelmän sijaan ihmisten asenteista ja osaamisesta. Kun kehitystyön tuloksena toteutetaan muutoksia, kohdataan usein muutosvastarintaa. Tällöin tarvitaan tehokasta muutosjohtamista. Muutostyössä on tärkeä hallita tietoa sen jakamisen lisäksi myös sen keräämisessä. Muutoksiin johtavan tiedon tulee olla aina relevanttia ja faktapohjaista. Muutosjohtamisen tavoitteena on saada aikaiseksi tietoa luova organisaatio, joka kestää itsekritiikkiä ja jolla on poisoppimisen taito. Työsuoritusten parantamiseksi toteutettiin pilottihanke, jossa testattiin tässä työssä kehitettyä palautejärjestelmää. Palaute perustui automaattisen tiedonkeruuohjelmiston keräämään dataan. Samalla selvitettiin työtä hidastaneita ongelmia yhteistyössä työntekijöiden kanssa. Pilottihankkeen tulokset ovat lupaavia, sillä seurannassa olleen kehäpyörämallin viikoittaisten vaiheaikojen keskiarvo laski 32,6 % ja kehäpyörän puolikkaiden kovasorvauksen vaiheaikojen vaihtelut vähenivät 18,1 ja 26,8 %. Tämän tutkimuksen tulosten perusteella päivittäisten työmäärien tarkempaa seurantaa kannattaa jatkaa ja palautejärjestelmää kehittää edelleen.

Development of Russian Ports in The Gulf of Finland

Russia has been one of the fastest developing economic areas in the world. Based on the GDP, the Russian economy grew evenly since the crisis in 1998 up till 2008. The growth in the gross domestic product has annually been some 5–10%. In 2007, the growth reached 8.1%, which is the highest figure after the 10% growth in 2000. Due to the growth of the economy and wage levels, purchasing power and consumption have been strongly increasing. The growing consumption has especially increased the imports of durables, such as passenger cars, domestic appliances and electronics. The Russian ports and infrastructure have not been able to satisfy the growing needs of exports and imports, which is why quite a large share of Russian foreign trade is going through third countries as transit transports. Finnish ports play a major role in transit transports to and from Russia. About 15% of the total value of Russian imports was transported through Finland in 2008. The economic recession that started in autumn 2008 and continues to date has had an impact on the economic development of Russia. The export income has decreased, mainly due to the reduced world market prices of energy products (oil and gas) and raw minerals. Investments have been postponed, getting credit is more difficult than before, and the ruble has weakened in relation to the euro and the dollar. The imports are decreasing remarkably, and are not forecast to reach the 2008 volumes even in 2012. The economic crisis is reflected in Finland's transit traffic. The volume of goods transported through Finland to and from Russia has decreased almost in the same proportion as the imports of goods to Russia. The biggest risk threatening the development of the Russian economy over long term is its dependence on export income from oil, gas, metals, minerals and forest products, as well as the trends of the world market prices of these products. Nevertheless, it is expected that the GDP of Russia will start to grow again in the forthcoming years due to the increased demand for energy products and raw minerals in the world. At the same time, it is obvious that the world market prices of these products will go up with the increasing demand. The increased income from exports will lead to a growth of imports, especially those of consumer goods, as the living standard of Russian citizens rises. The forecasts produced by the Russian Government concerning the economic development of Russia up till 2030 also indicate a shift in exported goods from raw materials to processed products, which together with energy products will become the main export goods of Russia. As a consequence, Russia may need export routes through third countries, which can be seen as an opportunity for increased transit transports through the ports of Finland. The ports competing with the ports of Finland for Russian foreign trade traffic are the Russian Baltic Sea ports and the ports of the Baltic countries. The strongest competitors are the Baltic Sea ports handling containers. On the Russian Baltic Sea, these ports include Saint Petersburg, Kaliningrad and, in the near future, the ports of Ust-Luga and possibly Vyborg. There are plans to develop Ust-Luga and Vyborg as modern container ports, which would become serious competitors to the Finnish ports. Russia is aiming to redirect as large a share as possible of foreign trade traffic to its own ports. The ports of Russia and the infrastructure associated with them are under constant development. On the other hand, the logistic capacity of Russia is not able to satisfy the continually growing needs of the Russian foreign trade. The capacity problem is emphasized by a structural incompatibility between the exports and imports in the Russian foreign trade. Russian exports can only use a small part of the containers brought in with imports. Problems are also caused by the difficult ice conditions and narrow waterways leading to the ports. It is predicted that Finland will maintain its position as a transit route for the Russian foreign trade, at least in the near future. The Russian foreign trade is increasing, and Russia will not be able to develop its ports in proportion with the increasing foreign trade. With the development of port capacity, cargo flows through the ports of Russia will grow. Structural changes in transit traffic are already visible. Firms are more and more relocating their production to Russia, for example as regards the assembly of cars and warehousing services. Simultaneously, an increasing part of transit cargoes are sent directly to Russia without unloading and reloading in Finland. New product groups have nevertheless been transported through Finland (textile products and tools), replacing the lost cargos. The global recession that started in autumn 2008 has influenced the volume of Russian imports and, consequently, the transit volumes of Finland, but the recession is not expected to be of long duration, and will thus only have a short-term impact on transit volumes. The Finnish infrastructure and services offered by the logistic chain should also be ready to react to the changes in imported product groups as well as to the change in Russian export products in the future. If the development plans of the Russian economy are realized, export products will be more refined, and the share of energy and raw material products will decrease. The other notable factor to be taken into consideration is the extremely fast-changing business environment in Russia. Operators in the logistic chain should be flexible enough to adapt to all kinds of changes to capitalise on business opportunities offered by the Russian foreign trade for the companies and for the transit volumes of Finnish ports, also in the future.

Populaatiodynamiikan perusteet sanoin ja numeroin

Kirjallisuusarvostelu

Unitizing in Supply Chain – Case SECU Container

The aim of this thesis is to analyze how increasing the level of unitizing affects to the costs in the transport system of a Finnish paper and board company. The parts of the supply chain where costs are analyzed are limited to domestic inland transport and port operations. Supply Chain management is important aspect of modern day companies’ strategies. Intermodal transport and different transport systems are the key items which are studied in the theory part of this thesis. In the case study the payload simulations for SECU container (Stora Enso Cargo Unit) stuffed in mills sites are base of the cost analyze of this thesis. Thesis also makes a glance for the restrictions and development trends in Finnish railroads. In analyze SECU containers are moved up to the mill site for stuffing. This increases the level of unitizing in supply chain. Analyze is made for three variation of current traffic lines. Analyze shows that when idea of intermodalism is well used there is considerable cost savings to gather in pre-transportation and port operations. But also effects to mill sites and destination ports needs to be take under considering. In analyze the effects of increased axle weight for SECU container transportation in Finnish railroads is studied. When transport unit is stuffed in earliest possible point supply chain and unloaded the last possible point the savings made in chain can be considerable. In case study of this thesis almost 40% savings in total costs could be reached in pre transportation and port operations when unitizing level is increased in supply chain.

The oxygenation in biological wastewater treatment of pulp and paper industry

The UPM-Kymmene Oyj Pietarsaari pulp and paper Mill biological wastewater treatment plant was built in the 1980's and the plant has been in use ever since. During the past years there have been problems with deviations. The wastewater treatment plant needs update, especially the aeration basin, where the old surface aerators cannot produce enough mixing and indroduce oxygen enough to the wastewater. In this thesis how extra aeration with oxygen affects the wastewater treatment plant effluent was studied. In the literature part the main focus is in aeration devices, which can be used in biological wastewater treatment. The target is to compare different kind of aerators, which are suitable for pulp and paper wastewater treatment. Studies show, that EDI-aerators are commonly used and also most suitable. In the experimental part, the focus is on the Pietarsaari Mills wastewater treatment plant and oxygen aeration during autumn 2008. This thesis presents the results of the trial run. Studies show, that extra oxygen devices can produce lot a of mixing and the oxygenation capacity was more than what the micro-organisms needed. The effect on sludge quality could not been seen during the trial runs.

Effect of forest-based biofuels production on carbon footprint, Case: Integrated LWC paper mill

International energy and climate strategies also set Finland’s commitments to increasing the use of renewable energy sources and reducing greenhouse gas emissions. The target can be achieved by, for example, increasing the use of energy wood. Finland’s forest biomass potential is significant compared with current use. Increased use will change forest management and wood harvesting methods however. The thesis examined the potential for integrated pulp and paper mills to increase bioenergy production. The effects of two bioenergy production technologies on the carbon footprint of an integrated LWC mill were studied at mill level and from the cradle-to-customer approach. The LignoBoost process and FT diesel production were chosen as bioenergy cases. The data for the LignoBoost process were obtained from Metso and for the FT diesel process from Neste Oil. The rest of the information is based on the literature and databases of the KCL-ECO life-cycle computer program and Ecoinvent. In both case studies, the carbon footprint was reduced. From the results, it can be concluded that it is possible to achieve a fossil-fuel-free pulp mill with the LignoBoost process. By using steam from the FT diesel process, the amount of auxiliary fuel can be reduced considerably and the bark boiler can be replaced. With a choice of auxiliary fuels for use in heat production in the paper mill and the production methods for purchased electricity, it is possible to affect the carbon footprints even more in both cases.

VOC emissions and control techniques in softwood veneer dryers

The objective in this Master’s Thesis was to determine VOC emissions from veneer drying in softwood plywood manufacturing. Emissions from plywood industry have become an important factor because of the tightened regulations worldwide. In this Thesis is researched quality and quantity of the VOCs from softwood veneer drying. One of the main objectives was to find out suitable cleaning techniques for softwood VOC emissions. In introduction part is presented veneer drying machines, wood mechanical and chemical properties. VOC control techniques and specified VOC limits are introduced also in the introduction part. Plywood mills have not had interest to VOC emissions previously nevertheless nowadays plywood mills worldwide must consider reduction of the emissions. This Thesis includes measuring of emissions from softwood veneer dryer, analyzation of measured test results and reviewing results. Different air conditions inside of the dryer were considered during planning of the measurements. Results of the emissions measurements were compared to the established laws. Results from this Thesis were softwood veneer dryer emissions in different air conditions. Emission control techniques were also studied for softwood veneer dryer emissions for further specific research.

Training system for conceptual design and evaluation for wastewater treatment

Rising population, rapid urbanisation and growing industrialisation have severely stressed water quality and its availability in Malawi. In addition, financial and institutional problems and the expanding agro industry have aggravated this problem. The situation is worsened by depleting water resources and pollution from untreated sewage and industrial effluent. The increasing scarcity of clean water calls for the need for appropriate management of available water resources. There is also demand for a training system for conceptual design and evaluation for wastewater treatment in order to build the capacity for technical service providers and environmental practitioners in the country. It is predicted that Malawi will face a water stress situation by 2025. In the city of Blantyre, this situation is aggravated by the serious pollution threat from the grossly inadequate sewage treatment capacity. This capacity is only 23.5% of the wastewater being generated presently. In addition, limited or non-existent industrial effluent treatment has contributed to the severe water quality degradation. This situation poses a threat to the ecologically fragile and sensitive receiving water courses within the city. This water is used for domestic purposes further downstream. This manuscript outlines the legal and policy framework for wastewater treatment in Malawi. The manuscript also evaluates the existing wastewater treatment systems in Blantyre. This evaluation aims at determining if the effluent levels at the municipal plants conform to existing standards and guidelines and other associated policy and regulatory frameworks. The raw material at all the three municipal plants is sewage. The typical wastewater parameters are Biochemical Oxygen Demand (BOD5), Chemical Oxygen Demand (COD), and Total Suspended Solids (TSS). The treatment target is BOD5, COD, and TSS reduction. Typical wastewater parameters at the wastewater treatment plant at MDW&S textile and garments factory are BOD5 and COD. The treatment target is to reduce BOD5 and COD. The manuscript further evaluates a design approach of the three municipal wastewater treatment plants in the city and the wastewater treatment plant at Mapeto David Whitehead & Sons (MDW&S) textile and garments factory. This evaluation utilises case-based design and case-based reasoning principles in the ED-WAVE tool to determine if there is potential for the tool in Blantyre. The manuscript finally evaluates the technology selection process for appropriate wastewater treatment systems for the city of Blantyre. The criteria for selection of appropriate wastewater treatment systems are discussed. Decision support tools and the decision tree making process for technology selection are also discussed. Based on the treatment targets and design criteria at the eight cases evaluated in this manuscript in reference to similar cases in the ED-WAVE tool, this work confirms the practical use of case-based design and case-based reasoning principles in the ED-WAVE tool in the design and evaluation of wastewater treatment 6 systems in sub-Sahara Africa, using Blantyre, Malawi, as the case study area. After encountering a new situation, already collected decision scenarios (cases) are invoked and modified in order to arrive at a particular design alternative. What is necessary, however, is to appropriately modify the case arrived at through the Case Study Manager in order to come up with a design appropriate to the local situation taking into account technical, socio-economic and environmental aspects. This work provides a training system for conceptual design and evaluation for wastewater treatment.

Under ytan, vid ytan och ovanför ytan : analys av tanken bakom tre läromedel i slöjd

This thesis is based on the personal experience gained related to the planning and production of three web-based teaching materials for the teaching subject knownas sloyd at the comprehensive school in Finland. After the teaching materials had been produced and published on the Internet at the Finnish textile teachers' website KässäBoxi, the idea for this thesis emanated from the questions: Why do the three teaching materials look the way they do and why do other textile teachers comment that they are different? In earlier sloyd educational research it has been stated that a scientific paradigm affects the individual ideology of a sloyd teacher. The aimfor my doctoral thesis is to continue on the topic. As the area of interest comprises the thought behind three teaching materials in sloyd, the aim of the thesis is to show how teaching and educational ideologies in sloyd appear in the teaching materials at hand. The research approach has parallels to research about another, tangible phenomena, namely the iceberg. In a similar way as an iceberg, a teaching material has a profound base, but the base is not always completely visible to the user of the teaching material. In this thesis I strive to show what there is under the surface, on the surface and above the surface of three teaching materials in sloyd. The research approach is defined as qualitative and phenomenologic-hermeneutic. The analysis results in knowledge about how the producer of a teaching material affects the character of a teaching material by choices concerning for example the form, structure, language and illustrations of the teaching material. The analysis also shows how the producers' individual educational and teaching ideologies within the teaching subject at hand appear by means of traces concerning the view on the pupil and the teacher, and the view on planning and conducting teaching in sloyd. The thesis also results in knowledge about how sloyd educational scientific theories and demands from society, as they are stated in the national core curriculum, appear in the three teaching materials. The application of the sloyd educational scientific theory of individual sloyd activity as a holistic educative system is also widened in the thesis. This thesis contributes to future research on producing teaching materials by information about what aspects a producer of teaching materials needs to consider and how the aspects become visible in the teaching materials. This kind of knowledge is valuable to teacher students in sloyd, to teachers in sloyd who intend to plan and produce teaching materials and to teachers who tutor the planning and production of teaching materials.

Tukkusähkön hintapiikkeihin reagoinnin keinot sellu- ja kartonkitehtaalla.

Sähkön tukkuhinnat vaihtelivat hyvin voimakkaasti talvella 2009–2010. Työssä on esitetty rajahyötytarkasteluna yhdistetyn sellu- ja paperitehtaan mahdollisuudet lisätä vastapainesähkön tuotantoa sekä leikata sähkön kulutusta aikana, jolloin sähkön tuntihinta on korkea. Työssä tarkastellaan myös erilaisia sähkömarkkinaoperaatioita. Työn ensimmäisessä osiossa esitellään Stora Enson Imatran tehtaat. Myöhemmissä kappaleissa perehdytään pohjoismaisten sähkömarkkinoiden sekä kaasupörssin toimintaan. Jotta korkeista sähkön hinnoista voitaisiin hyötyä, tulee sähkön myyntitarjoukset jättää sähköpörssi Nord Poolin kaupankäyntijärjestelmään toimitusvuorokautta edeltävänä päivänä. Tässä työssä on määritetty sähköenergian mahdolliset myyntivolyymit sekä hinnat eri tuotantotilanteissa. Työssä pyritään parantamaan tehtaan sähkökaupankäynnin kannattavuutta käyttämällä eri sähkökaupan tuotteita. Työssä esitetään malleja, joiden avulla korkeita sähkön markkinahintoja voidaan pyrkiä hyödyntämään. Eri sähkömarkkinatuotteet soveltuvat myös riskienhallintaan voimakkaasti vaihtelevilla sähkömarkkinoilla