Application and development of numerical methods for the modelling of innovative gas cooled fission reactors

Innovative gas cooled reactors, such as the pebble bed reactor (PBR) and the gas cooled fast reactor (GFR) offer higher efficiency and new application areas for nuclear energy. Numerical methods were applied and developed to analyse the specific features of these reactor types with fully three dimensional calculation models. In the first part of this thesis, discrete element method (DEM) was used for a physically realistic modelling of the packing of fuel pebbles in PBR geometries and methods were developed for utilising the DEM results in subsequent reactor physics and thermal-hydraulics calculations. In the second part, the flow and heat transfer for a single gas cooled fuel rod of a GFR were investigated with computational fluid dynamics (CFD) methods. An in-house DEM implementation was validated and used for packing simulations, in which the effect of several parameters on the resulting average packing density was investigated. The restitution coefficient was found out to have the most significant effect. The results can be utilised in further work to obtain a pebble bed with a specific packing density. The packing structures of selected pebble beds were also analysed in detail and local variations in the packing density were observed, which should be taken into account especially in the reactor core thermal-hydraulic analyses. Two open source DEM codes were used to produce stochastic pebble bed configurations to add realism and improve the accuracy of criticality calculations performed with the Monte Carlo reactor physics code Serpent. Russian ASTRA criticality experiments were calculated. Pebble beds corresponding to the experimental specifications within measurement uncertainties were produced in DEM simulations and successfully exported into the subsequent reactor physics analysis. With the developed approach, two typical issues in Monte Carlo reactor physics calculations of pebble bed geometries were avoided. A novel method was developed and implemented as a MATLAB code to calculate porosities in the cells of a CFD calculation mesh constructed over a pebble bed obtained from DEM simulations. The code was further developed to distribute power and temperature data accurately between discrete based reactor physics and continuum based thermal-hydraulics models to enable coupled reactor core calculations. The developed method was also found useful for analysing sphere packings in general. CFD calculations were performed to investigate the pressure losses and heat transfer in three dimensional air cooled smooth and rib roughened rod geometries, housed inside a hexagonal flow channel representing a sub-channel of a single fuel rod of a GFR. The CFD geometry represented the test section of the L-STAR experimental facility at Karlsruhe Institute of Technology and the calculation results were compared to the corresponding experimental results. Knowledge was gained of the adequacy of various turbulence models and of the modelling requirements and issues related to the specific application. The obtained pressure loss results were in a relatively good agreement with the experimental data. Heat transfer in the smooth rod geometry was somewhat under predicted, which can partly be explained by unaccounted heat losses and uncertainties. In the rib roughened geometry heat transfer was severely under predicted by the used realisable k − epsilon turbulence model. An additional calculation with a v2 − f turbulence model showed significant improvement in the heat transfer results, which is most likely due to the better performance of the model in separated flow problems. Further investigations are suggested before using CFD to make conclusions of the heat transfer performance of rib roughened GFR fuel rod geometries. It is suggested that the viewpoints of numerical modelling are included in the planning of experiments to ease the challenging model construction and simulations and to avoid introducing additional sources of uncertainties. To facilitate the use of advanced calculation approaches, multi-physical aspects in experiments should also be considered and documented in a reasonable detail.

Keskijohdon osaaminen strategian toteuttamisessa

Strategian määrittely ja suunnittelu on menestyvän yrityksen elinehto. Strategian toteuttaminen on yhtä tärkeää kuin sen suunnittelu. Tämän tutkimuksen tavoitteena oli selvittää millaisia tehtäviä yrityksen keskijohto tekee toteuttaessaan strategiaa sekä millaista osaamista ja tietoa tehtävät vaativat. Tutkimus suoritettiin laadullisena haastattelututkimuksena ja empiirinen aineisto kerättiin kuudella teemahaastattelulla. Haastateltaviksi valittiin kohdeyrityksen pää-toimialan keskijohto. Tutkimuksen tuloksena selvisi että kolme tärkeintä keskijohdon osaamista strate-gian toteuttamissa on vuorovaikutus ja johtaminen, resurssien allokointi ja muu-tosohjelmien toteuttaminen. Vuorovaikutuksen onnistumisessa on keskeistä keski-johdon sosiaaliset taidot. Keskijohdon tärkein strateginen työkalu on epämuodolli-nen vuorovaikutus. Suurin osa osaamisista sisältää hiljaista tietoa.

Customer orientation of sales personnel: Implications for service quality

Prior customer orientation research has concentrated mainly on studying the economical potential of customer orientation to companies. Service quality research instead has concentrated on emphasizing the evaluation of service quality from the customer’s perspective. This means that the service providers lack important information regarding customer orientation and service quality they would need for managerial purposes such as selecting and training employees. Therefore, there is an emerging need to study how customer orientation and service quality relate to company processes, policies and employees, and this study answers to those calls. The objective of this study was to examine what is the role of sales personnel’s’ customer orientation in quality of service delivery and what features support the development of customer orientation among sales personnel. Also the components customer orientation were studied extensively in order to understand how they relate to service quality. The empiric part of the study was conducted as a qualitative research by interviewing seven sales people from operative, tactical and strategic levels of the case corporation in order to get a broader view for customer orientation. The findings propose that both organizational factors and individual factors are affecting customer orientation construct inseparably. Organizational factors are bundled in this study under standards, support and systems, whereas individual factors are formed of employees’ personal attributes, motivation and self-perceived decision making authority. The findings suggest that in the service delivery process at an operative level, customer orientation appears largely in the employees’ individualistic characteristics. Their social and technical skills and motivation to serve customers are the most identifiable factors for customer orientation and consequently, quality service. However, organizational standards, support and systems are strongly dictating the frames the operative sales people operate in, having an influence on how the employees are experiencing their decision making authority and in the end, customer orientation. When looking at the service delivery process at tactical and strategic levels, customer orientation is affecting mainly in the organizational constructs through setting standards, support and systems. However, tactical and strategic level employees influence the operative level through individual customer orientation components as well. The findings indicate that their emotion and personal interaction skills are affecting the overall service delivery process mainly through supervisor support and motivation of the operative level employees. Based on this study it can be argued that an organization can operate as a facilitator and create certain frames for customer oriented sales behavior through standards, support and systems. However, as the impact of individual customer orientation factors on sales people’s service quality seems decisive, from an organizational perspective it puts pressures on the recruitment.

IT:n ja liiketoiminnan välisen palvelutason hallinta ulkoistetussa IT- palvelumallissa

Knowledge and competence are in important role in today’s demanding business environment where hard competition forces everyone to specialize and concentrate more to core competencies. Companies are outsourcing services, making processes more efficient and utilizing better their staff and available knowledge capital. It requires good strategic planning, process measuring and management and motivated staff, who is willing to continuously learn and absorb new information. This Thesis examines almost total IT service outsourcing to international service provider in situation where company previously had own IT. Work contains problematic situations during the change and suggestions how to improve services and understand the new model in a better way.

Visual analytics for behavioral and niche market segmentation

Companies require information in order to gain an improved understanding of their customers. Data concerning customers, their interests and behavior are collected through different loyalty programs. The amount of data stored in company data bases has increased exponentially over the years and become difficult to handle. This research area is the subject of much current interest, not only in academia but also in practice, as is shown by several magazines and blogs that are covering topics on how to get to know your customers, Big Data, information visualization, and data warehousing. In this Ph.D. thesis, the Self-Organizing Map and two extensions of it – the Weighted Self-Organizing Map (WSOM) and the Self-Organizing Time Map (SOTM) – are used as data mining methods for extracting information from large amounts of customer data. The thesis focuses on how data mining methods can be used to model and analyze customer data in order to gain an overview of the customer base, as well as, for analyzing niche-markets. The thesis uses real world customer data to create models for customer profiling. Evaluation of the built models is performed by CRM experts from the retailing industry. The experts considered the information gained with help of the models to be valuable and useful for decision making and for making strategic planning for the future.

Identification of characteristics for successful university-company partnership development

The importance of university-company collaboration has increased during the last decades. The drivers for that are, on the one hand, changes in business logic of companies and on the other hand the decreased state funding of universities. Many companies emphasize joint research with universities as an enabling input to their development processes, which aim at creating new innovations, products and wealth. These factors have changed universities’ operations and they have adopted several practices of dynamic business organizations, such as strategic planning, monitoring and controlling methods of internal processes etc. The objective of this thesis is to combine different characteristics of successful university-company partnership and its development. The development process starts with identifying potential partners in the university’s interest group, which requires understanding the role of different partners in the innovation system. Next, in order to find a common development basis, matching the policy and strategy between partners is needed. The third phase is to combine the academic and industrial objectives of a joint project, which is a typical form of university-company collaboration. The optimum is a win-win situation where both partners, universities and companies, can get addedvalue. For the companies added value typically means access to new research results before their competitors. For the universities added value offers a possibility to carry on high level scientific work. The research output in the form of published scientific articles is evaluated by the international science community. Because the university-company partnership is often executed by joint projects, the different forms of this kind of projects is discussed in this study. The most challenging form of collaboration is a semi-open project model, which is not based on bilateral activities between universities and companies but on a consortium of several universities, research institutes and companies. The universities and companies are core actors in the innovation system. Thus the discussion of their roles and relations to public operators like publicly funded financiers is important. In the Finnish innovation system there are at least the following doers executing strategies and policies: EU, Academy of Finland and TEKES. In addition to these, Strategic Centres for Science, Technology and Innovation which are owned jointly by companies, universities and research organizations have a very important role in their fields of business. They transfer research results into commercial actions to generate wealth. The thesis comprises two parts. The first part consists of an overview of the study including introduction, literature review, research design, synthesis of findings and conclusions. The second part introduces four original research publications.

User Experience of Geocaching and Its Application to Tourism and Education

Advances in technology have provided new ways of using entertainment and game technology to foster human interaction. Games and playing with games have always been an important part of people’s everyday lives. Traditionally, human-computer interaction (HCI) research was seen as a psychological cognitive science focused on human factors, with engineering sciences as the computer science part of it. Although cognitive science has made significant progress over the past decade, the influence of people’s emotions on design networks is increasingly important, especially when the primary goal is to challenge and entertain users (Norman 2002). Game developers have explored the key issues in game design and identified that the driving force in the success of games is user experience. User-centered design integrates knowledge of users’ activity practices, needs, and preferences into the design process. Geocaching is a location-based treasure hunt game created by a community of players. Players use GPS (Global Position System) technology to find “treasures” and create their own geocaches; the game can be developed when the players invent caches and used more imagination to creations the caches. This doctoral dissertation explores user experience of geocaching and its applications in tourism and education. Globally, based on the Geocaching.com webpage, geocaching has been played about 180 countries and there are more than 10 million registered geocachers worldwide (Geocaching.com, 25.11.2014). This dissertation develops and presents an interaction model called the GameFlow Experience model that can be used to support the design of treasure hunt applications in tourism and education contexts. The GameFlow Model presents and clarifies various experiences; it provides such experiences in a real-life context, offers desirable design targets to be utilized in service design, and offers a perspective to consider when evaluating the success of adventure game concepts. User-centered game designs have adapted to human factor research in mainstream computing science. For many years, the user-centered design approach has been the most important research field in software development. Research has been focusing on user-centered design in software development such as office programs, but the same ideas and theories that will reflect the needs of a user-centered research are now also being applied to game design (Charles et al. 2005.) For several years, we have seen a growing interest in user experience design. Digital games are experience providers, and game developers need tools to better understand the user experience related to products and services they have created. This thesis aims to present what the user experience is in geocaching and treasure hunt games and how it can be used to develop new concepts for the treasure hunt. Engineers, designers, and researchers should have a clear understanding of what user experience is, what its parts are, and most importantly, how we can influence user satisfaction. In addition, we need to understand how users interact with electronic products and people, and how different elements synergize their experiences. This doctoral dissertation represents pioneering work on the user experience of geocaching and treasure hunt games in the context of tourism and education. The research also provides a model for game developers who are planning treasure hunt concepts.

Commitment in Finnish–Japanese strategic alliances

Finnish companies have usually formed a strategic alliance as entry mode when entering the Japanese market. However, these strategic alliances have not been studied in a general level and it remains unknown, what kind cooperation the Finnish companies are operating with their Japanese partners. Especially Finnish companies that aims to penetrate the Japanese market are eager to know more about this. The recent studies on topic have focused on a single industry or company and that is why more general level study was needed. The purpose of this study is to analyze types of Finnish–Japanese strategic alliances from the Finnish point of view. The analysis is conducted by answering the questions what strategic alliance types appear in the strategic alliances between Japanese and Finnish companies, and how commitment affects strategic alliance type. This study also examines how committed Finnish–Japanese strategic alliances are. In this study multiple case study was selected as research method. The data is collected by interviewing six representative of Finnish companies in Japan individually. Multiple case study was chosen for this study, because this study is interested in the topic in general level and this research method is suitable for this kind of research. From the interviews common attributes were pointed out and from them the big picture of the topic was created. Types of strategic alliances were determined by using previous literature on that topic. Two different types of strategic alliance were discovered: supplier alliance which is the most common one and learning alliance. The commitment of strategic alliance was measured visually by utilizing a figure that was modified for this study.The figure is originally based on earlier studies on strategic alliance types and their connection to ownership and commitment. By utilizing the figure it was noticed that commitment affects strategic alliance types: the more there is commitment involved, the more there is cooperation. Finnish–Japanese strategic alliances are not very committed despite they have existed for a long time. However, there is potential to be more committed. That is why Finnish companies should increase the commitment and attract the partners to develop the strategic alliances, because it would possible increase competitive advantage. This would be beneficial to all members within the strategic alliance.

Strateginen materiaalihallinta

Tässä diplomityössä käydään läpi materiaalihallintaa strategisista näkökulmista, joihin kuuluvat strateginen suunnittelu ja johtaminen, hankintatoimi, materiaalihallinta ennustamisen ja varastoimisen kautta sekä yleinen toiminnan kehittäminen. Näiden osa-alueiden kokonaissummasta tulee käsite strateginen materiaalihallinta, jonka avulla tässä työssä yritetään ratkaista tutkimuskohteena olevan yrityksen materiaalihallinnan haasteita. Strateginen materiaalihallinnan suunnittelu pitää aloittaa hahmottamalla oma ympäristö, esimerkiksi portfolioanalyysiä ja Ishikawan kalanruotokaaviota hyväksikäyttäen. Tämän jälkeen omat materiaalihallinnan kyvykkyydet voidaan analysoida, esimerkiksi SWOT-analyysin avulla, jolla pystytään kartoittamaan omat vahvuudet ja heikkoudet, sekä uhat että mahdollisuudet. Vasta kun ympäristö ja omat kyvykkyydet ovat analysoitu, voidaan asettaa päämäärät ja tavoitteet, joilla pyritään tukemaan kyseistä liiketoimintaa strategisen materiaalihallinnan avulla. Näiden tavoitteiden ja päämäärien saavuttamista on tärkeää myös seurata ja mitata. Strategista materiaalihallintaa voidaan optimoida eri tavoin, esimerkiksi erilaisilla hankinta-, varastointi, ja ennustemalleilla. Myös ABC-analyysin avulla voidaan ohjata eri ABC-luokkien materiaalihallintaa. Strateginen materiaalihallinta pyrkii siis tukemaan strategisesti liiketoimintojen päämääriä ja samalla vastaamaan asiakaskysyntään määritetyllä toimituskyvyllä minimi kokonaiskustannuksin.

Collectiveness within startup teams – Leading the way to initiating and managing collective pursuit of opportunities in organizational contexts

While traditional entrepreneurship literature addresses the pursuit of entrepreneurial opportunities to a solo entrepreneur, scholars increasingly agree that new ventures are often founded and operated by entrepreneurial teams as collective efforts especially in hightechnology industries. Researchers also suggest that team ventures are more likely to survive and succeed than ventures founded by the individual entrepreneur although specific challenges might relate to multiple individuals being involved in joint entrepreneurial action. In addition to new ventures, entrepreneurial teams are seen central for organizing work in established organizations since the teams are able to create major product and service innovations that drive organizational success. Acknowledgement of the entrepreneurial teams in various organizational contexts has challenged the notion on the individual entrepreneur. However, considering that entrepreneurial teams represent a collective-level phenomenon that bases on interactions between organizational members, entrepreneurial teams may not have been studied as indepth as could be expected from the point of view of the team-level, rather than the individual or the individuals in the team. Many entrepreneurial team studies adopt the individualized view of entrepreneurship and examine the team members’ aggregate characteristics or the role of a lead entrepreneur. The previous understandings might not offer a comprehensive and indepth enough understanding of collectiveness within entrepreneurial teams and team venture performance that often relates to the team-level issues in particular. In addition, as the collective-level of entrepreneurial teams has been approached in various ways in the existing literatures, the phenomenon has been difficult to understand in research and practice. Hence, there is a need to understand entrepreneurial teams at the collective-level through a systematic and comprehensive perspective. This study takes part in the discussions on entrepreneurial teams. The overall objective of this study is to offer a description and understanding of collectiveness within entrepreneurial teams beyond individual(s). The research questions of the study are: 1) what collectiveness within entrepreneurial teams stands for, what constitutes the basic elements of it, and who are included in it, 2) why, how, and when collectiveness emerges or reinforces within entrepreneurial teams, and 3) why collectiveness within entrepreneurial teams matters and how it could be developed or supported. In order to answer the above questions, this study bases on three approaches, two set of empirical data, two analysis techniques, and conceptual study. The first data set consists of 12 qualitative semi-structured interviews with business school students who are seen as prospective entrepreneurs. The data is approached through a social constructionist perspective and analyzed through discourse analysis. The second data set bases on a qualitative multiplecase study approach that aims at theory elaboration. The main data consists of 14 individual and four group semi-structured thematic interviews with members of core entrepreneurial teams of four team startups in high-technology industries. The secondary data includes publicly available documents. This data set is approached through a critical realist perspective and analyzed through systematic thematic analysis. The study is completed through a conceptual study that aims at building a theoretical model of collective-level entrepreneurship drawing from existing literatures on organizational theory and social-psychology. The theoretical work applies a positivist perspective. This study consists of two parts. The first part includes an overview that introduces the research background, knowledge gaps and objectives, research strategy, and key concepts. It also outlines the existing knowledge of entrepreneurial team literature, presents and justifies the choices of paradigms and methods, summarizes the publications, and synthesizes the findings through answering the above mentioned research questions. The second part consists of five publications that address independent research questions but all enable to answer the research questions set for this study as a whole. The findings of this study suggest a map of relevant concepts and their relationships that help grasp collectiveness within entrepreneurial teams. The analyses conducted in the publications suggest that collectiveness within entrepreneurial teams stands for cognitive and affective structures in-between team members including elements of collective entity, collective idea of business, collective effort, collective attitudes and motivations, and collective feelings. Collectiveness within entrepreneurial teams also stands for specific joint entrepreneurial action components in which the structures are constructed. The action components reflect equality and democracy, and open and direct communication in particular. Collectiveness emerges because it is a powerful tool for overcoming individualized barriers to entrepreneurship and due to collectively oriented desire for, collective value orientation to, demand for, and encouragement to team entrepreneurship. Collectiveness emerges and reinforces in processes of joint creation and realization of entrepreneurial opportunities including joint analysis and planning of the opportunities and strategies, decision-making and realization of the opportunities, and evaluation, feedback, and sanctions of entrepreneurial action. Collectiveness matters because it is relevant for potential future entrepreneurs and because it affects the ways collective ventures are initiated and managed. Collectiveness also matters because it is a versatile, dynamic, and malleable phenomenon and the ideas of it can be applied across organizational contexts that require team work in discovering or creating and realizing new opportunities. This study further discusses how the findings add to the existing knowledge of entrepreneurial team literature and how the ideas can be applied in educational, managerial, and policy contexts.

Investigating the Existence of Business-IT Alignment Trap in Finnish IT Organizations

The overall purpose of this master's thesis is to investigate the existence of business-IT alignment trap in Finnish IT organizations. The alignment trap refers to the inability of IT investments to deliver the expected business benefits. The basis for this investigation is due to the previous knowledge that high level of IT alignment practice with very low efficacy in an organization can lead to alignment trap. The theory which was established on the dimensions of IT-alignment and efficacy of IT as a whole with considerations for cost reduction and revenue growth benefits. This study explored the same dimensions with the previous study but identified additional benefit (profitability). The study was conducted using the Finnish IT barometer data from different IT organizations. A quantitative research method was used in conducting this study which was built on positivist philosophical stance. The empirical data is based on survey data, an excerpt from the Finnish IT barometer data that captured the annual survey results of IT significance to Finnish organizations as evaluated by business and IT professionals. The survey data comprised of 249 respondents and their responses were categorized into high and low IT intensive which form the basis of the statistical analysis conducted. Overall, five analyses were conducted using the variables of cost reductions, revenue growth and profitability in the 2x2 matrix dimensions of IT alignment and efficacy of IT, grouped into alignment trap, maintenance zone, well-oiled IT and IT-enabled growth. The empirical results, revealed a partial existence of alignment trap in Finnish IT organizations. This is due to a very minute number of organizations that were ensnared in the alignment trap zone on the analyses conducted. Although they recorded considerable high performances in terms of revenue growth rate with IT spending below the average companies, their profitability was considered very low. Generally it was observed that Finnish IT organizations with high efficacy of IT practices had good performances, while those with low efficacy of IT experienced low performances, especially in the aspect of profitability, regardless of the degree of IT alignment. The study proposes that organizations should improve on practices that enhance effectiveness of IT more in order for them to realize the full benefits of IT and to avoid alignment trap.

Successful new venturing process implemented by the founding entrepreneur: A case of Finnish sawmill industry

The fundamental purpose of this research is to emphasise a founding entrepreneur’s own role in the construction of a successful business story, with the focus being on the analysis of the entrepreneur’s activities. The theoretical section sheds light on the heterogeneous nature of existing performance research and, thereby, opens the way for the behavioural approach research of entrepreneurs in the field of new venture performance research. This research can be seen to be in line with the latest trends in entrepreneurship research, which question the applicability of different organisational theories in entrepreneurship research. For this reason, the founding entrepreneur has been chosen, instead of the company, to be the unit of analysis in this research in order to lighten the link in question while developing and refining new knowledge in the field of entrepreneurship. The empirical section of this research focuses on the entrepreneur’s own actions or behaviours that can be seen to be associated with the company’s success. Although some of these actions may resemble the strategic actions of a company as defined in strategic management literature, these actions taken by the entrepreneur themselves must be distinguished from the different organisational actions. Usually, an entrepreneur makes decisions rather independently, mainly on basis of their own intuition and prevailing market conditions, whereas organisational actions are very systematic, and each decision involves many different people. For this reason, an entrepreneur’s actions must be distinguished from organisational actions. In additional to different action paths, the empirical data collected for this research also offers almost unambiguous proof that the actions taken by an entrepreneur at the different stages of a company’s development do play a crucial role in the success of the companies studied in this research. In this way, it is possible to identify a significant link between the behavioural approach research of entrepreneurs and new venture performance research. Due to a lack of behavioural research into founding entrepreneurs, this research has utilised a qualitative (hermeneutic) research approach. The researcher strove to establish a particularly close connection with the entrepreneurs that were studied here and, thus, understand the actions taken at the different stages of their companies’ development as well as the motives and fundamental purposes of these actions. It would not have been possible to manage such profound data that focuses on causalities by using quantitative methods. In addition to interviews, this research used corporate histories of the companies for collecting some of the research data. These corporate histories can be considered excellent tools for the researcher to obtain a preliminary understanding and can, thereby, be seen to have laid the ground for more in-depth and diverse analyses.

Facilitating corporate entrepreneurial behavior: A study of corporate entrepreneurial behavior in corporate banking

This study discusses the pronounced importance of corporate entrepreneurial behavior, CEB, facilitation and enablement as a key dimension in the rapidly changing business environment within companies. The research target is a large finance company in Finland, where regulations, compliance and processes restrict and refine extensively business approach. The purpose of this study is to foster the understanding of corporate entrepreneurial behavior and requirements and identify the supporters and inhibitors of facilitation of it. Furthermore, this study examines who should be driving the implementation and offer concrete outcome for the company to get the facilitation started and berth it as part of the organizational culture and values. The theoretical background is constructed from literature related to concept of corporate entrepreneurial behavior, factors supporting and hindering the facilitation based on previous studies and innovation management. Furthermore theoretical framework of middle managers entrepreneurial behavior in facilitation process was researched. Additionally top down and bottom up approach of conversational space building within the organization in order to foster innovation and involving mindset and behavior was in the core literature. The empirical research conducted for the study consists three parts; innovation audit questionnaire, semi-structured interviews and secondary data from previously made research within the case company. Questionnaire and interviews were targeted to eight middle managers within the company, the head of branch regions in corporate segment. The secondary data was collected from over 300 employees in the case company by an external company. Research results were analyzed mainly by themes and source division in adaption with the theoretical framework. The study finds that facilitation of CEB should be a strategic choice and requires strong management support and examples. Behavior should be involved with organizational culture, values, structures and processes. The companies´ willingness to take risks and encourage employees at all levels to participate and be involved by taking ownership and responsibility is in the core. CEB is found to be a key dimension in increasing employee satisfaction and engagement, competitive advantages and economic growth of companies. There is increased interest towards CEB in the case company but there is lack in the mutual consensus of it. CEB is not in the strategy although the mindset and support from management is in place. There is no concrete enablement and space for innovation and CEB although the platform would be receptive. Further research is needed to build shared vision of CEB and how to make it a part of the organizational culture and values in addition to building the conversational space.

Commitment in Finnish–Japanese strategic alliances

Finnish companies have usually formed a strategic alliance as entry mode when entering the Japanese market. However, these strategic alliances have not been studied in a general level and it remains unknown, what kind cooperation the Finnish companies are operating with their Japanese partners. Especially Finnish companies that aims to penetrate the Japanese market are eager to know more about this. The recent studies on topic have focused on a single industry or company and that is why more general level study was needed. The purpose of this study is to analyze types of Finnish–Japanese strategic alliances from the Finnish point of view. The analysis is conducted by answering the questions what strategic alliance types appear in the strategic alliances between Japanese and Finnish companies, and how commitment affects strategic alliance type. This study also examines how committed Finnish–Japanese strategic alliances are. In this study multiple case study was selected as research method. The data is collected by interviewing six representative of Finnish companies in Japan individually. Multiple case study was chosen for this study, because this study is interested in the topic in general level and this research method is suitable for this kind of research. From the interviews common attributes were pointed out and from them the big picture of the topic was created. Types of strategic alliances were determined by using previous literature on that topic. Two different types of strategic alliance were discovered: supplier alliance which is the most common one and learning alliance. The commitment of strategic alliance was measured visually by utilizing a figure that was modified for this study. The figure is originally based on earlier studies on strategic alliance types and their connection to ownership and commitment. By utilizing the figure it was noticed that commitment affects strategic alliance types: the more there is commitment involved, the more there is cooperation. Finnish–Japanese strategic alliances are not very committed despite they have existed for a long time. However, there is potential to be more committed. That is why Finnish companies should increase the commitment and attract the partners to develop the strategic alliances, because it would possible increase competitive advantage. This would be beneficial to all members within the strategic alliance.

Scouring uncharted waters – managing outbound open innovation in maritime industry

This thesis discusses the unexplored opportunities of open innovation, with a special focus on outbound open innovation. The extant literature indicates that the field of outbound open innovation still lacks of research, and especially the managerial issues lack of practicality. Also, the applicability to SME’s and traditional fields has been argued. The purpose of this study is to investigate how the outbound open innovation activities can be managed in maritime industry. By combining existing literature from the field of open innovation and innovation management, this study suggests first a theoretical management model, and contributes how it can be applied to industry- and company specifics; and then develops a practical model by constructing from the case company’s current management processes. As a result, the study synthesises a theoretical model of how the outbound open innovation activities can be managed. This model positions the outbound open innovation activities, the theoretical concepts found from the literature review, R&D processes, and the outbound open innovation implementation stages identified by previous research; and thus responses the need for practical steps for any company planning outbound open innovation activities. Practical tool for managers is also provided by identifying issues that are applied to industry- and company specifics. Then, open-ended case study questions are formulated accordingly and expert interviews selected by chain referral sampling, are conducted. Interviews provide information for the current management processes. By identifying the best practices and main challenges it is possible to outline and evaluate current outbound open innovation management processes and strategic choices in it. The researcher considers also the networks and their spheres of influences for the actors, activities and resources in the processes. Thus, the study provides a novel approach, and practical tools for the researchers and practioners in the field of open innovation. All in all, the study has come up that outbound open innovation is applicable to maritime industry; and the case company indeed has perfected its processes as cost-effective as possible, and so found its balance between the costs and benefits. However, several issues for future development are pointed out, and the study offers proposals for theory building. Findings are piloting in kind, but provide several theoretical and managerial implications, and reveal new research needs for the field.