Preparing for CRIS: Challenges and Opportunities for Systems Integration at Finnish Universities

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Exploring the Impact of Mental Health Education on Adolescents’ Perceptions About Mental Health and Mental Illness. Improving community health

The purpose of this study was to explore perceptions of mental health and mental illness as well as the perceptions towards people with mental illness among adolescents, and further to examine the impact that a mental health educational intervention has on these perceptions. The review of the literature revealed a small number of publications on mental health educational interventions among adolescents which aimed at increasing knowledge and affecting attitudes towards mental illness with positive results. Fifty nine pupils (13-16 years old) from two randomly selected secondary schools around Athens, Greece, participated in this study. These schools were randomly selected as the experimental group (n=28) which participated in the mental health educational intervention, and the comparison group (n=31), which did not receive any intervention. Data were collected using individual interviews with open-ended questions, drawings and a questionnaire (Opinions about Mental Illness - O.M.I. scale). The participants described mental health and mental illness before and after the intervention, using the same expressions for both terms. Among the experimental group, changes were seen within the same expressions after the intervention, although some descriptions did not change. However, after the intervention, participants in the experimental group did not confuse mental health with mental illness and they also included specific diagnostic examples or stated that mental illness can happen to anyone and it can be managed. Moreover, they expressed positive attitudes towards mentally ill people, which they had not done before the intervention. The analysis of the drawings before the intervention showed that mentally ill persons were drawn similarly in both groups. After the intervention, the drawings of the participants in the experimental group changed, including fewer negative elements, while the drawings of the comparison group did not change. Regarding the results on the O.M.I. scale, it was found that the score on the Social Discrimination factor significantly decreased from pre-test to post-test in both study groups. The experimental group had higher levels on Social Discrimination at pre-test compared to the comparison group, but this difference was not significant at post-test. No significant changes were found for the Social Restriction factor for either study group. Scores of the Social Care and Social Integration factors increased significantly only in the intervention group. Overall, the results of this study indicate that the mental health educational intervention had a positive impact on the perceptions about mental health and mental illness among adolescents, and (mental) health professionals can use these results for implementing similar interventions and further research.

Susteinable steelmaking by process integration

Environmental issues, including global warming, have been serious challenges realized worldwide, and they have become particularly important for the iron and steel manufacturers during the last decades. Many sites has been shut down in developed countries due to environmental regulation and pollution prevention while a large number of production plants have been established in developing countries which has changed the economy of this business. Sustainable development is a concept, which today affects economic growth, environmental protection, and social progress in setting up the basis for future ecosystem. A sustainable headway may attempt to preserve natural resources, recycle and reuse materials, prevent pollution, enhance yield and increase profitability. To achieve these objectives numerous alternatives should be examined in the sustainable process design. Conventional engineering work cannot address all of these substitutes effectively and efficiently to find an optimal route of processing. A systematic framework is needed as a tool to guide designers to make decisions based on overall concepts of the system, identifying the key bottlenecks and opportunities, which lead to an optimal design and operation of the systems. Since the 1980s, researchers have made big efforts to develop tools for what today is referred to as Process Integration. Advanced mathematics has been used in simulation models to evaluate various available alternatives considering physical, economic and environmental constraints. Improvements on feed material and operation, competitive energy market, environmental restrictions and the role of Nordic steelworks as energy supplier (electricity and district heat) make a great motivation behind integration among industries toward more sustainable operation, which could increase the overall energy efficiency and decrease environmental impacts. In this study, through different steps a model is developed for primary steelmaking, with the Finnish steel sector as a reference, to evaluate future operation concepts of a steelmaking site regarding sustainability. The research started by potential study on increasing energy efficiency and carbon dioxide reduction due to integration of steelworks with chemical plants for possible utilization of available off-gases in the system as chemical products. These off-gases from blast furnace, basic oxygen furnace and coke oven furnace are mainly contained of carbon monoxide, carbon dioxide, hydrogen, nitrogen and partially methane (in coke oven gas) and have proportionally low heating value but are currently used as fuel within these industries. Nonlinear optimization technique is used to assess integration with methanol plant under novel blast furnace technologies and (partially) substitution of coal with other reducing agents and fuels such as heavy oil, natural gas and biomass in the system. Technical aspect of integration and its effect on blast furnace operation regardless of capital expenditure of new operational units are studied to evaluate feasibility of the idea behind the research. Later on the concept of polygeneration system added and a superstructure generated with alternative routes for off-gases pretreatment and further utilization on a polygeneration system producing electricity, district heat and methanol. (Vacuum) pressure swing adsorption, membrane technology and chemical absorption for gas separation; partial oxidation, carbon dioxide and steam methane reforming for methane gasification; gas and liquid phase methanol synthesis are the main alternative process units considered in the superstructure. Due to high degree of integration in process synthesis, and optimization techniques, equation oriented modeling is chosen as an alternative and effective strategy to previous sequential modelling for process analysis to investigate suggested superstructure. A mixed integer nonlinear programming is developed to study behavior of the integrated system under different economic and environmental scenarios. Net present value and specific carbon dioxide emission is taken to compare economic and environmental aspects of integrated system respectively for different fuel systems, alternative blast furnace reductants, implementation of new blast furnace technologies, and carbon dioxide emission penalties. Sensitivity analysis, carbon distribution and the effect of external seasonal energy demand is investigated with different optimization techniques. This tool can provide useful information concerning techno-environmental and economic aspects for decision-making and estimate optimal operational condition of current and future primary steelmaking under alternative scenarios. The results of the work have demonstrated that it is possible in the future to develop steelmaking towards more sustainable operation.

Value of Information Logistics Integration in Digital Business Ecosystem

Digital business ecosystems (DBE) are becoming an increasingly popular concept for modelling and building distributed systems in heterogeneous, decentralized and open environments. Information- and communication technology (ICT) enabled business solutions have created an opportunity for automated business relations and transactions. The deployment of ICT in business-to-business (B2B) integration seeks to improve competitiveness by establishing real-time information and offering better information visibility to business ecosystem actors. The products, components and raw material flows in supply chains are traditionally studied in logistics research. In this study, we expand the research to cover the processes parallel to the service and information flows as information logistics integration. In this thesis, we show how better integration and automation of information flows enhance the speed of processes and, thus, provide cost savings and other benefits for organizations. Investments in DBE are intended to add value through business automation and are key decisions in building up information logistics integration. Business solutions that build on automation are important sources of value in networks that promote and support business relations and transactions. Value is created through improved productivity and effectiveness when new, more efficient collaboration methods are discovered and integrated into DBE. Organizations, business networks and collaborations, even with competitors, form DBE in which information logistics integration has a significant role as a value driver. However, traditional economic and computing theories do not focus on digital business ecosystems as a separate form of organization, and they do not provide conceptual frameworks that can be used to explore digital business ecosystems as value drivers—combined internal management and external coordination mechanisms for information logistics integration are not the current practice of a company’s strategic process. In this thesis, we have developed and tested a framework to explore the digital business ecosystems developed and a coordination model for digital business ecosystem integration; moreover, we have analysed the value of information logistics integration. The research is based on a case study and on mixed methods, in which we use the Delphi method and Internetbased tools for idea generation and development. We conducted many interviews with key experts, which we recoded, transcribed and coded to find success factors. Qualitative analyses were based on a Monte Carlo simulation, which sought cost savings, and Real Option Valuation, which sought an optimal investment program for the ecosystem level. This study provides valuable knowledge regarding information logistics integration by utilizing a suitable business process information model for collaboration. An information model is based on the business process scenarios and on detailed transactions for the mapping and automation of product, service and information flows. The research results illustrate the current cap of understanding information logistics integration in a digital business ecosystem. Based on success factors, we were able to illustrate how specific coordination mechanisms related to network management and orchestration could be designed. We also pointed out the potential of information logistics integration in value creation. With the help of global standardization experts, we utilized the design of the core information model for B2B integration. We built this quantitative analysis by using the Monte Carlo-based simulation model and the Real Option Value model. This research covers relevant new research disciplines, such as information logistics integration and digital business ecosystems, in which the current literature needs to be improved. This research was executed by high-level experts and managers responsible for global business network B2B integration. However, the research was dominated by one industry domain, and therefore a more comprehensive exploration should be undertaken to cover a larger population of business sectors. Based on this research, the new quantitative survey could provide new possibilities to examine information logistics integration in digital business ecosystems. The value activities indicate that further studies should continue, especially with regard to the collaboration issues on integration, focusing on a user-centric approach. We should better understand how real-time information supports customer value creation by imbedding the information into the lifetime value of products and services. The aim of this research was to build competitive advantage through B2B integration to support a real-time economy. For practitioners, this research created several tools and concepts to improve value activities, information logistics integration design and management and orchestration models. Based on the results, the companies were able to better understand the formulation of the digital business ecosystem and the importance of joint efforts in collaboration. However, the challenge of incorporating this new knowledge into strategic processes in a multi-stakeholder environment remains. This challenge has been noted, and new projects have been established in pursuit of a real-time economy.

Social Solidarity and Fear of Crime - Community and Individual Approaches in Responses to Mass Violence after School Shootings

The aim of this study was to examine community and individual approaches in responses to mass violence after the school shooting incidents in Jokela (November 2007) and Kauhajoki (September 2008), Finland. In considering the community approach, responses to any shocking criminal event may have integrative, as well as disintegrative effects, within the neighborhood. The integration perspective argues that a heinous criminal event within one’s community is a matter of offence to collectively held feelings and beliefs, and increases perceived solidarity; whereas the disintegration perspective suggests that a criminal event weakens the social fabric of community life by increasing fear of crime and mistrust among locals. In considering the individual approach, socio-demographic factors, such as one’s gender, are typically significant indicators, which explain variation in fear of crime. Beyond this, people are not equally exposed to violent crime and therefore prior victimization and event related experiences may further explain why people differ in their sensitivity to risk from mass violence. Finally, factors related to subjective mental health, such as depressed mood, are also likely to moderate individual differences in responses to mass violence. This study is based on the correlational design of four independent cross-sectional postal surveys. The sampling frames (N=700) for the surveys were the Finnish speaking adult population aged 18–74-years. The first mail survey in Jokela (n=330) was conducted between May and June 2008, approximately six months from the shooting incident at the local high-school. The second Jokela survey (n=278) was conducted in May–June of 2009, 18 months removed from the incident. The first survey in Kauhajoki (n=319) was collected six months after the incident at the local University of Applied Sciences, March– April 2009, and the second (n=339) in March–April 2010, approximately 18 months after the event. Linear and ordinal regression and path analysis are used as methods of analyses. The school shootings in Jokela and Kauhajoki were extremely disturbing events, which deeply affected the communities involved. However, based on the results collected, community responses to mass violence between the two localities were different. An increase in social solidarity appears to apply in the case of the Jokela community, but not in the case of the Kauhajoki community. Thus a criminal event does not necessarily impact the wider community. Every empirical finding is most likely related to different contextual and event-specific factors. Beyond this, community responses to mass violence in Jokela also indicated that the incident was related to a more general sense of insecurity and was also associating with perceived community deterioration and further suggests that responses to mass violence may have both integrating and disintegrating effects. Moreover, community responses to mass violence should also be examined in relation to broader social anxieties and as a proxy for generalized insecurity. Community response is an emotive process and incident related feelings are perhaps projected onto other identifiable concerns. However, this may open the door for social errors and, despite integrative effects, this may also have negative consequences within the neighborhood. The individual approach suggests that women are more fearful than men when a threat refers to violent crime. Young women (aged 18–34) were the most worried age and gender group as concerns perception of threat from mass violence at schools compared to young men (aged 18–34), who were also the least worried age and gender group when compared to older men. It was also found that concerns about mass violence were stronger among respondents with the lowest level of monthly household income compared to financially better-off respondents. Perhaps more importantly, responses to mass violence were affected by the emotional proximity to the event; and worry about the recurrence of school shootings was stronger among respondents who either were a parent of a school-aged child, or knew a victim. Finally, results indicate that psychological wellbeing is an important individual level factor. Respondents who expressed depressed mood consistently expressed their concerns about mass violence and community deterioration. Systematic assessments of the impact of school shooting events on communities are therefore needed. This requires the consolidation of community and individual approaches. Comparative study designs would further benefit from international collaboration across disciplines. Extreme school violence has also become a national concern and deeper understanding of crime related anxieties in contemporary Finland also requires community-based surveys.

Integration of biofuel production. How pyrolysis and torrefaction can be integrated

The main goal of this work is to clarify the idea of two thermochemical conversion processes of biomass - pyrolysis and torrefaction and to identify possible ways how and where exactly these processes can be integrated. Integration into CHP power plant process was chosen as one of the most promising ways. Multiple product development was determined by means of this integration concept. The analysis of the possible pros and cons was made based on some experimental data collected from the previous studies related to the topic of my work. In addition, one real integrated case was represented in the last part of the work. Finally, to highlight the main idea brief summarizing was done.

Innovation process development and business process integration - a multiple case study

The main objective of this study was to find out the bases for innovation model formulation in an existing organization based on cases. Innovation processes can be analyzed based on their needs and based on their emphasis on the business model development or R&D. The research was conducted in energy sector within one company by utilizing its projects as cases for the study. It is typical for the field of business that development is slow, although the case company has put emphasis on its innovation efforts. Analysis was done by identifying the cases’ needs and comparing them. The results were that because of the variances in the needs of the cases, the applicability of innovation process models varies. It was discovered that by dividing the process into two phases, a uniform model could be composed. This model would fulfill the needs of the cases and potential future projects as well.

Organization of the marketing communication activities after fusion - the integration and the decision making processes

This master’s thesis was made in order to gain answers to the question of how the integration of the marketing communications and the decision making related to it in a geographically dispersed service organization could be improved in a situation where an organization has gone through a merger. The effects of the organizational design dimensions towards the integration of the marketing communications and the decision making related to it was the main focus. A case study as a research strategy offered a perfect frames for an exploratory study and the data collection was conducted by semi-structured interviews and observing. The main finding proved that from the chosen design dimensions, decentralization, coordination and power, could be found specific factors that in a geographically dispersed organization are affecting the integration of the marketing communications negatively. The effects can be seen mostly in the decision making processes, roles and in the division of responsibility, which are affecting the other dimensions and by this, the integration. In a post-merger situation, the coordination dimension and especially the information asymmetry and the information flow seem to have a largest affect towards the integration of the marketing communications. An asymmetric information distribution with the lack of business and marketing education resulted in low self-assurance and at the end in fragmented management and to the inability to set targets and make independent decisions. As conclusions it can be stated, that with the organizational design dimensions can the effects of a merger towards the integration process of the marketing communications to be evaluated.

Economics of Power-to-Gas integration to wastewater treatment plant

Solar and wind power produce electricity irregularly. This irregular power production is problematic and therefore production can exceed the need. Thus sufficient energy storage solutions are needed. Currently there are some storages, such as flywheel, but they are quite short-term. Power-to-Gas (P2G) offers a solution to store energy as a synthetic natural gas. It also improves nation’s energy self-sufficiency. Power-to-Gas can be integrated to an industrial or a municipal facility to reduce production costs. In this master’s thesis the integration of Power-to-Gas technologies to wastewater treatment as a part of the VTT’s Neo-Carbon Energy project is studied. Power-to-Gas produces synthetic methane (SNG) from water and carbon dioxide with electricity. This SNG can be considered as stored energy. Basic wastewater treatment technologies and the production of biogas in the treatment plant are studied. The utilisation of biogas and SNG in heat and power production and in transportation is also studied. The integration of the P2G to wastewater treatment plant (WWTP) is examined mainly from economic view. First the mass flows of flowing materials are calculated and after that the economic impact based on the mass flows. The economic efficiency is evaluated with Net Present Value method. In this thesis it is also studied the overall profitability of the integration and the key economic factors.

Impacts of capacity remunerative mechanisms on cross-border trade

The European ambitious targets to increase the share of renewable generation pose a challenge to the generation adequacy. Many European member states are concerned that energy-only markets alone might not be able to deliver sufficient capacity required to meet the future electricity demand and back up shortfalls of energy from renewable energy sources (RES) during periods of low wind and sun. Many EU members consider to re-design their energy-only markets and establish different forms of capacity remunerative mechanisms (CRMs) to maintain the security of supply. There is a certain concern that market design changes at the level of EU member countries might conflict with the European goal of a single market. As soon as many European markets are highly interconnected, uncoordinated CRMs might create negative crossborder effects and hinder the achievement of the Internal Electricity Market in Europe. The pros and cons of capacity markets are well examined at the national level. However, the cross-border effects of capacity markets within the European market aiming at higher integration have received less attention. This doctoral dissertation examines the cross-border effects of unilateral implementation of CRMs applying both theoretical and case study analyses. The results show that capacity remunerative mechanisms (CRMs) may cause negative cross-border effects, especially if they are implemented unilaterally.

Integration of marketing research data in new product development. Case study: Food industry company

The aim of this master’s thesis is to provide a real life example of how marketing research data is used by different functions in the NPD process. In order to achieve this goal, a case study in a company was implemented where gathering, analysis, distribution and synthesis of marketing research data in NPD were studied. The main research question was formulated as follows: How is marketing research data integrated and used by different company functions in the NPD process? The theory part of the master’s thesis was focused on the discussion of the marketing function role in NPD, use of marketing research particularly in the food industry, as well as issues related to the marketing/R&D interface during the NPD process. The empirical part of the master’s thesis was based on qualitative explanatory case study research. Individual in-depth interviews with company representatives, company documents and online research were used for data collection and analyzed through triangulation method. The empirical findings advocate that the most important marketing data sources at the concept generation stage of NPD are: global trends monitoring, retailing audit and consumers insights. These data sets are crucial for establishing the potential of the product on the market and defining the desired features for the new product to be developed. The findings also suggest the example of successful crossfunctional communication during the NPD process with formal and informal communication patterns. General managerial recommendations are given on the integration in NPD of a strategy, process, continuous improvement, and motivated cross-functional product development teams.