Design and implementation of a multipurpose reactor for scale-up studies

In the theoretical part, the different polymerisation catalysts are introduced and the phenomena related to mixing in the stirred tank reactor are presented. Also the advantages and challenges related to scale-up are discussed. The aim of the applied part was to design and implement an intermediate-sized reactor useful for scale-up studies. The reactor setting was tested making one batch of Ziegler–Natta polypropylene catalyst. The catalyst preparation with a designed equipment setting succeeded and the catalyst was analysed. The analyses of the catalyst were done, because the properties of the catalyst were compared to the normal properties of Ziegler–Natta polypropylene catalyst. The total titanium content of the catalyst was slightly higher than in normal Ziegler–Natta polypropylene catalyst, but the magnesium and aluminium content of the catalyst were in the normal level. By adjusting the siphonation tube and adding one washing step the titanium content of the catalyst could be decreased. The particle size of the catalyst was small, but the activity was in a normal range. The size of the catalyst particles could be increased by decreasing the stirring speed. During the test run, it was noticed that some improvements for the designed equipment setting could be done. For example more valves for the chemical feed line need to be added to ensure inert conditions during the catalyst preparation. Also nitrogen for the reactor needs to separate from other nitrogen line. With this change the pressure in the reactor can be kept as desired during the catalyst preparation. The proposals for improvements are presented in the applied part. After these improvements are done, the equipment setting is ready for start-up. The computational fluid dynamics model for the designed reactor was provided by cooperation with Lappeenranta University of Technology. The experiments showed that for adequate mixing with one impeller, stirring speed of 600 rpm is needed. The computational fluid dynamics model with two impellers showed that there was no difference in the mixing efficiency if the upper impeller were pumping downwards or upwards.

Multilevel converter modulation: implementation and analysis

Multilevel converters provide an attractive solution to bring the benefits of speed-controlled rotational movement to high-power applications. Therefore, multilevel inverters have attracted wide interest in both the academic community and in the industry for the past two decades. In this doctoral thesis, modulation methods suitable especially for series connected H-bridge multilevel inverters are discussed. A concept of duty cycle modulation is presented and its modification is proposed. These methods are compared with other well-known modulation schemes, such as space-vector pulse width modulation and carrier-based modulation schemes. The advantage of the modified duty-cycle modulation is its algorithmic simplicity. A similar mathematical formulation for the original duty cycle modulation is proposed. The modified duty cycle modulation is shown to produce well-formed phase-to-neutral voltages that have lower total harmonic distortion than the space-vector pulse width modulation and the duty cycle modulation. The space-vector-based solution and the duty cycle modulation, on the other hand, result in a better-quality line-to-line voltage and current waveform. The voltage of the DC links in the modules of the series-connected H-bridge inverter are shown to fluctuate while they are under load. The fluctuation causes inaccuracies in the voltage production, which may result in a failure of the flux estimator in the controller. An extension for upper-level modulation schemes, which changes the switching instants of the inverter so that the output voltage meets the reference voltage accurately regardless of the DC link voltages, is proposed. The method is shown to reduce the error to a very low level when a sufficient switching frequency is used. An appropriate way to organize the switching instants of the multilevel inverter is to make only one-level steps at a time. This causes restrictions on the dynamical features of the modulation schemes. The produced voltage vector cannot be rotated several tens of degrees in a single switching period without violating the above-mentioned one-level-step rule. The dynamical capabilities of multilevel inverters are analyzed in this doctoral thesis, and it is shown that the multilevel inverters are capable of operating even in dynamically demanding metal industry applications. In addition to the discussion on modulation schemes, an overvoltage in multilevel converter drives caused by cable reflection is addressed. The voltage reflection phenomenon in drives with long feeder cables causes premature insulation deterioration and also affects the commonmode voltage, which is one of the main reasons for bearing currents. Bearing currents, on the other hand, cause fluting in the bearings, which results in premature bearing failure. The reflection phenomenon is traditionally prevented by filtering, but in this thesis, a modulationbased filterless method to mitigate the overvoltage in multilevel drives is proposed. Moreover, the mitigation method can be implemented as an extension for upper-level modulation schemes. The method exploits the oscillations caused by two consecutive voltage edges so that the sum of the oscillations results in a mitigated peak of the overvoltage. The applicability of the method is verified by simulations together with experiments with a full-scale prototype.

Usability Centered Implementation of a Web Based Value Added Module

Customer specific functionalities are a challenging part of procurement and invoice automation environments. In Basware Enterprise Purchase to Payment product family the customer specific reports are supported only in a basic level without any seamless interface between all EPP products. Also other customer specific functionalities are not supported as there is no customizable interface between the applications and only the most common features are implemented to the products themselves. In this thesis foundations are created for a new web based value added module where it is possible to create seamless customer specific functionalities throughout the whole EPP product family. The work is implemented in a Proof of Concept type of piloting. The system is created in user centered way where the users are able to explain their requests and determine their needs. The result is an excellent foundation for a module that can be developed further.

Regional potential for collaborative implementation of small CHP plants in bioenergy technology

This thesis is a preliminary study targeting South-Eastern Finland. The objective was to find out the financial and functional readiness and willingness of the small and medium-sized enterprises of the region to manufacture and sell distributed bioenergy solutions collaboratively as a business network. In this case these solutions mean small-scale (0.5 - 3 MW) woodchips-operated combined heat and power (CHP) plants. South-Eastern Finland has suffered from a decline in the recent years, mostly due to the problems of the traditionally strong industrial know-how area of the region, the paper industry. Local small and medium-sized companies will have to find new ways to survive the toughening competition. A group of 40 companies from suitable industries were selected and financial and comparative analysis was performed on them. Additionally 19 managing directors of the companies were selected for an interview to find out their views on networking, its requirements, advantages and the general interest in it. The studied companies were found to be generally in fairly good financial condition and in that sense, fit for networking activities. The interviews revealed that the companies were capable of producing all the needed elements for the plants in question, and the managers appeared to be very interested in and have a positive attitude towards such business networks. Thus it can be said that the small and medium-sized companies of the region are capable of and interested in manufacturing small bio-CHP plants as a production network.

Design and Implementation of MUPE Server Context Tool for Eclipse IDE

The development of software tools begun as the first computers were built. The current generation of development environments offers a common interface to access multiple software tools and often also provide a possibility to build custom tools as extensions to the existing development environment. Eclipse is an open source development environment that offers good starting point for developing custom extensions. This thesis presents a software tool to aid the development of context-aware applications on Multi-User Publishing Environment (MUPE) platform. The tool is implemented as an Eclipse plug-in. The tool allows developer to include external server side contexts to their MUPE applications. The tool allows additional context sources to be added through the Eclipse's extension point mechanism. The thesis describes how the tool was designed and implemented. The implementation consists of tool core component part and an additional context source extension part. Tool core component is responsible for the actual context addition and also provides the needed user interface elements to the Eclipse workbench. Context source component provides the needed context source related information to the core component. As part of the work an update site feature was also implemented for distributing the tool through Eclipse update mechanism.

The determination of EONIA rate: The impact of the financial crisis and the effects of the changes in the monetary policy implementation framework

EONIA is a market based overnight interest rate, whose role as the starting point of the yield curve makes it critical from the perspective of the implementation of European Central Bank´s common monetary policy in the euro area. The financial crisis that started in 2007 had a large impact on the determination mechanism of this interest rate, which is considered as the central bank´s operational target. This thesis examines the monetary policy implementation framework of the European Central Bank and changes made to it. Furthermore, we discuss the development of the recent turmoil in the money market. EONIA rate is modelled by means of a regression equation using variables related to liquidity conditions, refinancing need, auction results and calendar effects. Conditional volatility is captured by an EGARCH model, and autocorrelation is taken into account by employing an autoregressive structure. The results highlight how the tensions in the initial stage of the market turmoil were successfully countered by ECB´s liquidity policy. The subsequent response of EONIA to liquidity conditions under the full allotment liquidity provision procedure adopted after the demise of Lehman Brothers is also established. A clear distinction in the behavior of the interest rate between the sub-periods was evident. In the light of the results obtained, some of the challenges posed by the exit-strategy implementation will be addressed.

Role of culture in knowledge transfer and sharing - case ERP implementation

The main objective of this study was to examine how culture influences knowledge transfer and sharing within multicultural ERP project implementation in China. The main interest was to explain how national culture and knowledge are linked by understanding how culture influences knowledge transfer and sharing in a project organization. The other objective of this work was to discuss what Chinese cultural characteristic inhibit and en-hance knowledge sharing in ERP project. The perspective of this study was qualitative and the empirical material was collected from theme interviews among Stora Enso employees. Conclusion of this thesis is that Finns have a very direct style of communication and sharing knowledge whereas Chinese respect face shaving and indirect communication. Another conclusion is that knowledge sharing does not “just happen”, it is needed that project members understand national culture to get all project members commitment to project. In China most important is understand local business processes and understand role of trust and guanxi.

A practice perspective on organizational implementation of information technology

Implementering av ett informationssystem ur en organisatorisk synvinkel initieras av en idé om ett system och avslutas då användningen av det inte längre kräver en medveten ansträngning. Ifall tolkningen av implementering är denna, är det fråga om en långsam och komplicerad process, som berör organisationens alla parter. Ny informationsteknologi anses påverka flertalet arbetsprocesser och organiseringen av det dagliga arbetet. Möjligheterna att ta i bruk systemet och utnyttja det är många. I avhandlingen undersöks implementering av ett system för att administrera hemvårdsbesök där hemvårdare använde handdatorer för att registrera information om besökens längd och innehåll. I avhandlingen observeras vilka förändringar som sker i arbetets praxis p.g.a. det nya systemet och hur dessa förändringar påverkar vårdarbetet. Forskningen inleds med att strukturera teorier om arbetspraxis för kommande analys. Arbetspraxis är inarbetade och rutinmässiga arbetssätt i arbetets sociomateriella omgivning. Arbetspraxis i avhandlingen innebär hemvårdarens praxis och upplevd erfarenhet, där verksamheten informeras av gemensamma arbetssätt, projekt, identiteter och intressen. Organisationens auktoritet kommer även fram i den förverkligade arbetspraxisen. Forskningen genomfördes som en etnografisk longitudinell studie under åren 2001-2004. I studien observerades hur nyttjandet av handdatorerna framskred ur ett organisatoriskt perspektiv. Hemvårdares arbete och verksamhet (arbetspraxis) observerades både under vårdsbesök och under pauser. Därtill intervjuades hemvårdarna för att erhålla en bättre förståelse för de rationaliteter som styr arbetet och hur systemet togs i bruk. Dokument relaterade till projektet att införa ett nytt system och administrativa dokument har utnyttjats som källmaterial. Analysen av källmaterialet styrdes av det teoretiska tillvägagångssättet att undersöka arbetspraxis. Problem som identifierades i samband med införandet av systemet och de förändringar som det medförde analyserades i detalj. Parallellt analyserades organisatorisk makt, kontroll och arbetsidentitet. Undersökningen beskriver hur det nya systemet gradvis anpassades till hemvården efter ett initialt motstånd. Under själva implementering av systemet ifrågasattes tidigare arbetspraxis och inställningen till den eftersom arbetspraxisens materiella omgivning förändrades. Det teoretiska tillvägagångssättet i att undersöka arbetspraxis framhäver vårdarens agerande i förändringsprocessen. Resultatet av forskningen visar vikten av realistiska målsättningar, givande av gruppstöd med återkoppling samt förmåga att anpassa sig till det oväntade vid införande av informationssystem.

Consistency and change in Finnish broadcasting policy : the implementation of digital television and lessons from the Canadian experience

Konsistens och förändring i finländsk etermediapolitik. Implementering av digital television och en jämförelse med Kanada Avhandlingen handlar om hur det finländska televisionssystemet förändrades i slutet av 1990-talet från en nationell institution till ett dualistiskt system som präglas av stark marknadsorientering. Syftet med avhandlingen är att förstå på vilket sätt en så snabb förändring kunde ske och analysera de institutionella faktorerna bakom utvecklingen. På teoretisk nivå diskuteras tesen om det nära sambandet mellan statliga politiska institutioner och rundradioverksamhetens institutioner. Avhandlingen består av två fallstudier. Den första sätter fokus på de första åren av den finländska televisionens digitaliseringsprocess som startade med starka industriell-nationalistiska motiveringar. Analysen, som baserar på offentliga dokument, sträcker sig framtill hösten 2001 då de digitala televisionssändningarna startade och regeringspropositionen om den nya kommunikationsmarknadslagen lämnades till riksdagen. Dessa policy-processer analyseras som en ”marknadisering” av de traditionella styrningsprinciper och idéer gällande finländsk rundradioverksamheten. En jämförelse mellan Finlands och Kanadas nationella rundradiopolitik gör att man kan koppla slutsatserna till den internationella utvecklingen. Jämförelsen visar hur kommunikationspolitiska linjen i de två länderna har kommit att likna varandra trots att ländernas tv-system och deras styrordningar är mycket olika. Exemplet med Kanada visar att den särskilda teknologin inte är viktig utan snarare de kommersiella intressen som står bakom och som beslutsfattare gärna döljer i en nationalistisk retorik. Studien visar att det är viktigt att beakta vilken tyngd man i politiken ger de två sidor som rundradioverksamheten består av: sändningsteknologin och verksamheten som en speciell kulturform. Nationalstatens handlingsutrymme minskar inom fältet om målet är att vara framgångsrik i konkurrensen i den nya internationella ekonomin. Enligt de nyliberalistiska principer som det politiska systemet överlag har tillägnat sig det är önskvärd men också helt inhemska institutionella traditioner och praxis som följdes i den finländska digitaliseringsprocessen främjade utvecklingen som ledde till att nästan alla ursprungliga nationella syften föll sönder.

CRM system implementation for managing customer relationships in business-to-business markets

Tutkielman tavoitteena oli selvittää, kuinka CRM-järjestelmä otetaan käyttöön asiakkuuksienhallinnan tueksi yritysten välisillä markkinoilla. Tutkielma keskittyy erityisesti käyttöönoton varhaisiin vaiheisiin selvittämällä, mikä on järjestelmien rooli asiakkuudenhallinnassa ja miten ne tukevat erilaisia käyttäjätasoja, jotka työssä jaettiin strategiseksi, operatiiviseksi ja analyyttiseksi tasoksi. Lisäksi työ esittelee käyttöönottoon yleisimmin liittyviä sudenkuoppia. Tutkielma on laadullinen tutkimus ja siinä on kuvattu CRM-järjestelmän käyttöönottoon liittyviä kysymyksiä yritysten välisillä markkinoilla toimivan caseyrityksen näkökulmasta. Tutkimuksessa havaittiin, että CRM-järjestelmän onnistunut käyttöönotto vaatii mahdollisimman yksinkertaista ja helppokäyttöistä järjestelmää. Käyttöönoton ei myöskään tulisi vaatia monimutkaista koulutusta, vaikkakin koulutusten tärkeys tunnistettiin. Tutkimus osoitti, että vaikka tämänhetkiset CRM-järjestelmät keskittyvät enemmän yksityiskohtaisten asiakasanalyysien tekoon, järjestelmä voi myös palvella asiakkaisiin liittyvän tiedon yhteisenä tallennus- ja jakamispaikkana. Lisäksi tutkimuksessa todettiin, että useimmiten potentiaaliset sudenkuopat olivat luonteeltaan hyvin käytännönläheisiä, kuten järjestelmän käyttämättömyys sekä huono motivointi ja sitouttaminen.

The effects of national legislation on the implementation of IFRS in Finland and Russia

This study examines the possible differences in IFRS implementation between Finnish and Russian companies as well as reasons behind them by theoretical means as well as by incorporating a case study of two companies.

Exploring Adaptive Implementation of On-Chip Networks

As technology geometries have shrunk to the deep submicron regime, the communication delay and power consumption of global interconnections in high performance Multi- Processor Systems-on-Chip (MPSoCs) are becoming a major bottleneck. The Network-on- Chip (NoC) architecture paradigm, based on a modular packet-switched mechanism, can address many of the on-chip communication issues such as performance limitations of long interconnects and integration of large number of Processing Elements (PEs) on a chip. The choice of routing protocol and NoC structure can have a significant impact on performance and power consumption in on-chip networks. In addition, building a high performance, area and energy efficient on-chip network for multicore architectures requires a novel on-chip router allowing a larger network to be integrated on a single die with reduced power consumption. On top of that, network interfaces are employed to decouple computation resources from communication resources, to provide the synchronization between them, and to achieve backward compatibility with existing IP cores. Three adaptive routing algorithms are presented as a part of this thesis. The first presented routing protocol is a congestion-aware adaptive routing algorithm for 2D mesh NoCs which does not support multicast (one-to-many) traffic while the other two protocols are adaptive routing models supporting both unicast (one-to-one) and multicast traffic. A streamlined on-chip router architecture is also presented for avoiding congested areas in 2D mesh NoCs via employing efficient input and output selection. The output selection utilizes an adaptive routing algorithm based on the congestion condition of neighboring routers while the input selection allows packets to be serviced from each input port according to its congestion level. Moreover, in order to increase memory parallelism and bring compatibility with existing IP cores in network-based multiprocessor architectures, adaptive network interface architectures are presented to use multiple SDRAMs which can be accessed simultaneously. In addition, a smart memory controller is integrated in the adaptive network interface to improve the memory utilization and reduce both memory and network latencies. Three Dimensional Integrated Circuits (3D ICs) have been emerging as a viable candidate to achieve better performance and package density as compared to traditional 2D ICs. In addition, combining the benefits of 3D IC and NoC schemes provides a significant performance gain for 3D architectures. In recent years, inter-layer communication across multiple stacked layers (vertical channel) has attracted a lot of interest. In this thesis, a novel adaptive pipeline bus structure is proposed for inter-layer communication to improve the performance by reducing the delay and complexity of traditional bus arbitration. In addition, two mesh-based topologies for 3D architectures are also introduced to mitigate the inter-layer footprint and power dissipation on each layer with a small performance penalty.

The Progress and Challenges of the e-Government Initiatives and Implementation in the Kurdistan Region of Iraq

The Electronic Government (e-Government) means delivering the services and information to the citizens and businesses through the use of Information and Communication Technology (ICT) in order to enable them to interact more effectively with the government, and to increase the quality of the services. As many other governments in the developed and developing countries, the Kurdistan Regional Government (KRG) has embarked on the e-Government initiatives. This study revealed that there are various challenges which affect the e-Government in the Kurdistan Region of Iraq (KRI), but also a lot of e-Government progress has happened. In addition, based on the United Nations’ e-Government maturity level benchmarking, the e-Government in the KRI is at the interactive stage. In this study the services that the citizens want from the government in order to implement an appropriate e-Government were also identified.

Automation Concept for Electrically Excited LV Synchronous Motor: Implementation into AC500 Programmable Logic Environment

This bachelor’s thesis is a part of the research project realized in the summer 2011 in Lappeenranta University of Technology. The goal of the project was to develop an automation concept for controlling the electrically excited synchronous motor. Thesis concentrates on the implementation of the automation concept into the ABB’s AC500 programmable logic enviroment. The automation program was developed as a state machine with the ABB’s PS501 Control Builder software. For controlling the automation program is developed a fieldbus control and with CodeSys Visualization Tool a local control with control panel. The fieldbus control is done to correspond the ABB drives communication profile and the local control is implemented with a function block which feeds right control words into the statemachine. A field current control of the synchronous motor is realized as a method presented in doctoral thesis of Olli Pyrhönen (Pyrhönen 1998). The Method combines stator flux and torque based openloop control and power factor based feedback control.