Palvelun laadun dimensiot ja asiakastyytyväisyys osuuskuntamuotoisissa opinnoissa

Saimaan ammattikorkeakoulun uudessa Luotsi-toimintamallissa opiskelijat oppivat yritysten antamia toimeksiantoja toteuttamalla. Opiskelijat perustavat oman osuuskuntamuotoisen tiimiyrityksen. Suuri osa opetussuunnitelman opintojaksoista toteutetaan tehden asiakasprojekteja. Tutkielman päätavoitteena on selvittää, mitkä ovat palvelun laadun dimensiot osuuskuntamuotoisissa opinnoissa ja millaisina opiskelijat ne kokevat. Tavoitteina on myös käsitellä tapaa, joilla palvelun laatu muodostuu korkeakouluissa sekä tutkia miksi asiakastyytyväisyyttä mitataan ja millaiseksi se koetaan. Teorian pohjalta päädytään tarkastelemaan viittä koulutuksen dimensiota, jotka ovat osa korkeakoulun palvelun laatua ja vaikuttavat asiakastyytyväisyyteen: opetussuunnitelma, oppimisympäristöt, opetusmenetelmät, ohjaus ja opetus sekä osaamisen arviointi. Empiirisen tutkimuksen kohderyhmänä on Luotsi-mallissa aloittanut liiketalouden pilottiryhmä. Tutkimuksessa käytetään kyselylomaketta sekä teemahaastattelua ryh-mälle. Kyselylomake koostuu 108 kysymyksestä, jotka on jaettu kolmeen osaan: tärkeyden, odotusten ja nykytilan arviointiin seitsenportaisella Li-kert-asteikolla. Haastattelun avulla syvennetään aineistoa. Tulokseksi saadaan attribuuttien ja dimensioiden tärkeysjärjestys sekä arvot nykytilalle, odotuksille ja niiden erotukselle. Tulosten pohjalta nostetaan esiin attribuutit, jotka tarvitsevat eniten kehitystoimia. Tutkimusten perusteella voidaan todeta, että eniten kehitystä vaatii ope-tussuunnitelma ja siihen välillisesti liittyvät attribuutit muista dimensioista. Suurin kynnys Luotsi-toimintamallin onnistumiselle on saavuttaa opiskelijoiden ja opettajien välille toimiva keskusteluyhteys sekä kehittää jatkuvasti opetussuunnitelmaa työelämälähtöisemmäksi.

Complexity Optimization in Product Development with Modularization

A company’s competence to manage its product portfolio complexity is becoming critically important in the rapidly changing business environment. The continuous evolvement of customer needs, the competitive market environment and internal product development lead to increasing complexity in product portfolios. The companies that manage the complexity in product development are more profitable in the long run. The complexity derives from product development and management processes where the new product variant development is not managed efficiently. Complexity is managed with modularization which is a method that divides the product structure into modules. In modularization, it is essential to take into account the trade-off between the perceived customer value and the module or component commonality across the products. Another goal is to enable the product configuration to be more flexible. The benefits are achieved through optimizing complexity in module offering and deriving the new product variants more flexibly and accurately. The developed modularization process includes the process steps for preparation, mapping the current situation, the creation of a modular strategy and implementing the strategy. Also the organization and support systems have to be adapted to follow-up targets and to execute modularization in practice.

Functional studies on bacterial nucleotide-regulated inorganic pyrophosphatases

CBS domains are ~60 amino acid tandemly repeated regulatory modules forming a widely distributed domain superfamily. Found in thousands of proteins from all kingdoms of life, CBS domains have adopted a variety of functions during evolution, one of which is regulation of enzyme activity through binding of adenylate-containing compounds in a hydrophobic cavity. Mutations in human CBS domain-containing proteins cause hereditary diseases. Inorganic pyrophosphatases (PPases) are ubiquitous enzymes, which pull pyrophosphate (PPi) producing reactions forward by hydrolyzing PPi into phosphate. Of the two nonhomologous soluble PPases, dimeric family II PPases, belonging to the DHH family of phosphoesterases, require a transition metal and magnesium for maximal activity. A quarter of the almost 500 family II PPases, found in bacteria and archaea, contain a 120-250 amino acid N-terminal insertion, comprised of two CBS domains separated in sequence by a DRTGG domain. These enzymes are thus named CBS-PPases. The function of the DRTGG domain in proteins is unknown. The aim of this PhD thesis was to elucidate the structural and functional differences of CBS-PPases in comparison to family II PPases lacking the regulatory insert. To this end, we expressed, purified and characterized the CBS-PPases from Clostridium perfringens (cpCBS-PPase) and Moorella thermoacetica (mtCBS-PPase), the latter lacking a DRTGG domain. Both enzymes are homodimers in solution and display maximal activity against PPi in the presence of Co2+ and Mg2+. Uniquely, the DRTGG domain was found to enable tripolyphosphate hydrolysis at rates similar to that of PPi. Additionally, we found that AMP and ADP inhibit, while ATP and AP4A activate CBSPPases, thus enabling regulation in response to changes in cellular energy status. We then observed substrate- and nucleotide-induced conformational transitions in mtCBS-PPase and found that the enzyme exists in two differentially active conformations, interconverted through substrate binding and resulting in a 2.5-fold enzyme activation. AMP binding was shown to produce an alternate conformation, which is reached through a different pathway than the substrate-induced conformation. We solved the structure of the regulatory insert from cpCBS-PPase in complex with AMP and AP4A and proposed that conformational changes in the loops connecting the catalytic and regulatory domains enable activity regulation. We examined the effects of mutations in the CBS domains of mtCBS-PPase on catalytic activity, as well as, nucleotide binding and inhibition.

Kuorman tasaus web-palvelimissa

Web-palvelussa sivuston suorituskyky muodostaa suuren osan käyttökokemuksen mielekkyydestä. Sivuston ollessa kuormitetumpi kuin normaalisti, saattaa se toimia tavallista hitaammin. Tasaamalla yhden web-palvelimen kuormaa muille palvelimille, joko laitteisto tai ohjelmistopohjaisella kuormantasauksella, voidaan saavuttaa merkittäviä suorituskykyparannuksia koko palvelulle. Teoriaosassa selvitettiin kuormantasaukseen soveltuvien algoritmien toimintaa sekä tietokantapohjaista replikaatiota, joka välittää saamansa tiedon lähes välittömästi toiselle palvelimelle. Apachen kuormantasausmoduuliin sekä sen sisältämiin algoritmeihin luotiin myös katsaus teoriaosassa. Varsinaisessa työssä luotiin Apachen kuormantasauspalvelimen ja kahden suorituspalvelimen avulla toimiva palvelinjärjestelmä. Kuormantasaimeen asennettiin käyttöön tahmeat sessiot, joiden toimintaa selvitettiin Drupal-ohjelman avulla. Apachessa on ollut ongelmia tahmeiden sessioiden kanssa, mutta työssä huomattiin kaiken toimivan mainiosti. Kuormantasaus ja tietokantojen replikaatio toimi, kuten odotettiin.

Software for design of experiments and response modelling of cake ltration applications

Filtration is a widely used unit operation in chemical engineering. The huge variation in the properties of materials to be ltered makes the study of ltration a challenging task. One of the objectives of this thesis was to show that conventional ltration theories are di cult to use when the system to be modelled contains all of the stages and features that are present in a complete solid/liquid separation process. Furthermore, most of the ltration theories require experimental work to be performed in order to obtain critical parameters required by the theoretical models. Creating a good overall understanding of how the variables a ect the nal product in ltration is somewhat impossible on a purely theoretical basis. The complexity of solid/liquid separation processes require experimental work and when tests are needed, it is advisable to use experimental design techniques so that the goals can be achieved. The statistical design of experiments provides the necessary tools for recognising the e ects of variables. It also helps to perform experimental work more economically. Design of experiments is a prerequisite for creating empirical models that can describe how the measured response is related to the changes in the values of the variable. A software package was developed that provides a ltration practitioner with experimental designs and calculates the parameters for linear regression models, along with the graphical representation of the responses. The developed software consists of two software modules. These modules are LTDoE and LTRead. The LTDoE module is used to create experimental designs for di erent lter types. The lter types considered in the software are automatic vertical pressure lter, double-sided vertical pressure lter, horizontal membrane lter press, vacuum belt lter and ceramic capillary action disc lter. It is also possible to create experimental designs for those cases where the variables are totally user de ned, say for a customized ltration cycle or di erent piece of equipment. The LTRead-module is used to read the experimental data gathered from the experiments, to analyse the data and to create models for each of the measured responses. Introducing the structure of the software more in detail and showing some of the practical applications is the main part of this thesis. This approach to the study of cake ltration processes, as presented in this thesis, has been shown to have good practical value when making ltration tests.

Improving Transportation and Warehousing Efficiency with Simulation-Based Decision Support Systems

Transportation and warehousing are large and growing sectors in the society, and their efficiency is of high importance. Transportation also has a large share of global carbondioxide emissions, which are one the leading causes of anthropogenic climate warming. Various countries have agreed to decrease their carbon emissions according to the Kyoto protocol. Transportation is the only sector where emissions have steadily increased since the 1990s, which highlights the importance of transportation efficiency. The efficiency of transportation and warehousing can be improved with the help of simulations, but models alone are not sufficient. This research concentrates on the use of simulations in decision support systems. Three main simulation approaches are used in logistics: discrete-event simulation, systems dynamics, and agent-based modeling. However, individual simulation approaches have weaknesses of their own. Hybridization (combining two or more approaches) can improve the quality of the models, as it allows using a different method to overcome the weakness of one method. It is important to choose the correct approach (or a combination of approaches) when modeling transportation and warehousing issues. If an inappropriate method is chosen (this can occur if the modeler is proficient in only one approach or the model specification is not conducted thoroughly), the simulation model will have an inaccurate structure, which in turn will lead to misleading results. This issue can further escalate, as the decision-maker may assume that the presented simulation model gives the most useful results available, even though the whole model can be based on a poorly chosen structure. In this research it is argued that simulation- based decision support systems need to take various issues into account to make a functioning decision support system. The actual simulation model can be constructed using any (or multiple) approach, it can be combined with different optimization modules, and there needs to be a proper interface between the model and the user. These issues are presented in a framework, which simulation modelers can use when creating decision support systems. In order for decision-makers to fully benefit from the simulations, the user interface needs to clearly separate the model and the user, but at the same time, the user needs to be able to run the appropriate runs in order to analyze the problems correctly. This study recommends that simulation modelers should start to transfer their tacit knowledge to explicit knowledge. This would greatly benefit the whole simulation community and improve the quality of simulation-based decision support systems as well. More studies should also be conducted by using hybrid models and integrating simulations with Graphical Information Systems.

Software for design of experiments and response modelling of cake filtration applications

Filtration is a widely used unit operation in chemical engineering. The huge variation in the properties of materials to be ltered makes the study of ltration a challenging task. One of the objectives of this thesis was to show that conventional ltration theories are di cult to use when the system to be modelled contains all of the stages and features that are present in a complete solid/liquid separation process. Furthermore, most of the ltration theories require experimental work to be performed in order to obtain critical parameters required by the theoretical models. Creating a good overall understanding of how the variables a ect the nal product in ltration is somewhat impossible on a purely theoretical basis. The complexity of solid/liquid separation processes require experimental work and when tests are needed, it is advisable to use experimental design techniques so that the goals can be achieved. The statistical design of experiments provides the necessary tools for recognising the e ects of variables. It also helps to perform experimental work more economically. Design of experiments is a prerequisite for creating empirical models that can describe how the measured response is related to the changes in the values of the variable. A software package was developed that provides a ltration practitioner with experimental designs and calculates the parameters for linear regression models, along with the graphical representation of the responses. The developed software consists of two software modules. These modules are LTDoE and LTRead. The LTDoE module is used to create experimental designs for di erent lter types. The lter types considered in the software are automatic vertical pressure lter, double-sided vertical pressure lter, horizontal membrane lter press, vacuum belt lter and ceramic capillary action disc lter. It is also possible to create experimental designs for those cases where the variables are totally user de ned, say for a customized ltration cycle or di erent piece of equipment. The LTRead-module is used to read the experimental data gathered from the experiments, to analyse the data and to create models for each of the measured responses. Introducing the structure of the software more in detail and showing some of the practical applications is the main part of this thesis. This approach to the study of cake ltration processes, as presented in this thesis, has been shown to have good practical value when making ltration tests.

Tuotannonohjausjärjestelmän kehittäminen PK-yrityksessä

Työn tarkoitus on kehittää pk-konepajayrityksen tuotannonohjausta ja toteuttaa tuotannonohjausjärjestelmän hallittu käyttöönotto. Tavoitteena on parantaa yrityksen kapasiteetin hallintaa ja toimitusaikapitävyyttä sekä kehittää tuotannon päivittäisohjausta ja koordinointia. Työssä on sovellettu prosessijohtamisen kuvausmenetelmiä ja prosessin kehittämistyökaluja tuotannonohjausprosessin kehittämiseen ja tuotannonohjausjärjestelmän käyttöönottoon. Lisäksi työssä on lähdekirjallisuuden avulla tutkittu eri tuotannonohjausperiaatteiden soveltuvuutta asiakasohjautuvaan joustavaan konepajatuotantoon. Työ on toteutettu kvalitatiivisena toimintatutkimuksena. Tuotannonohjausjärjestelmän käyttöönoton avulla on mahdollista kehittää tuotannon kapasiteetin ohjausta ja tuotannonkoordinaatiota. Tämä kuitenkin edellyttää tuotannonohjausprosessin kuvaamista sekä ohjaukseen osallistuvien henkilöiden roolien ja vastuiden selkeää määrittelyä. Erityisen kriittistä on saada koko organisaatio suhtautumaan muutokseen positiivisesti.

Dynamiikan simulointi poralaitteiden tuotekehityksessä

Diplomityö käsittelee kallioporalaitteen eliniän kuormitusten arviointiin tarkoitetun simulointimallin rakentamista. Työssä luotiin modulaarinen malli, jolla voidaan simuloida dynaamisesti esteen yliajo. Esteen yliajo on perinteinen tehdastesti uusien laitteiden prototyypeille. Sillä pyritään saamaan selville laitteen maksimikuormitustapaukset. Pintaporalaitteen simulointimalli tehtiin ADAMS-ohjelmistolla laitteen suunnittelussa tehtyjä CAD-malleja hyödyntäen. ADAMS-ohjelmistolla mallinnettiin laitteen yksinkertaistettu mekaniikka siten, että laite oli jaettu viiteen eri moduuliin. Runko ja telasto olivat omana osionaan. Puomi ja syöttölaite oli oma kokoonpanonsa ja ohjaamo sekä katteet olivat kaksi erillistä modulia. Viides moduuli oli hydrauliikka, joka simuloitiin rinnakkaissimulointina EASY5-ohjelmistolla. Simuloituja esteen yliajon tuloksia verrattiin prototyyppilaitteen tehdastestien mitattuihin kuormituksiin. Vertailu tehtiin mallinnettujen neljän sylinterin paineita tarkastelemalla. Tuloksia tarkastellessa havaittiin, että simulaatiomalli antaa varsinkin staattisissa tarkasteluissa oikean suuntaisia tuloksia. Dynaamisissa tilanteissa koneen maksimikuormituksilla mallinnustarkkuus ei tämän työn laajuudessa ole riittävä varsinaiseen eliniän analysointiin. Sen sijaan mallinnustekniikka todettiin periaatteessa toimivaksi ja jatkokehityskelpoiseksi.

A Model-Based Development and Verification Framework for Distributed System-on-Chip Architecture

The capabilities and thus, design complexity of VLSI-based embedded systems have increased tremendously in recent years, riding the wave of Moore’s law. The time-to-market requirements are also shrinking, imposing challenges to the designers, which in turn, seek to adopt new design methods to increase their productivity. As an answer to these new pressures, modern day systems have moved towards on-chip multiprocessing technologies. New architectures have emerged in on-chip multiprocessing in order to utilize the tremendous advances of fabrication technology. Platform-based design is a possible solution in addressing these challenges. The principle behind the approach is to separate the functionality of an application from the organization and communication architecture of hardware platform at several levels of abstraction. The existing design methodologies pertaining to platform-based design approach don’t provide full automation at every level of the design processes, and sometimes, the co-design of platform-based systems lead to sub-optimal systems. In addition, the design productivity gap in multiprocessor systems remain a key challenge due to existing design methodologies. This thesis addresses the aforementioned challenges and discusses the creation of a development framework for a platform-based system design, in the context of the SegBus platform - a distributed communication architecture. This research aims to provide automated procedures for platform design and application mapping. Structural verification support is also featured thus ensuring correct-by-design platforms. The solution is based on a model-based process. Both the platform and the application are modeled using the Unified Modeling Language. This thesis develops a Domain Specific Language to support platform modeling based on a corresponding UML profile. Object Constraint Language constraints are used to support structurally correct platform construction. An emulator is thus introduced to allow as much as possible accurate performance estimation of the solution, at high abstraction levels. VHDL code is automatically generated, in the form of “snippets” to be employed in the arbiter modules of the platform, as required by the application. The resulting framework is applied in building an actual design solution for an MP3 stereo audio decoder application.

Asiantuntijapalvelun tuotteistaminen logistiikka-alan yrityksessä

Tämän tutkimuksen tavoitteena oli selvittää miten logistiikka-alan asiantuntijapalvelu voidaan tuotteistaa palvelun tarjoajan ja palvelun ostajan kannalta selkeäksi kokonaisuudeksi. Tutkimus toteutettiin konstruktiivisella tutkimusotteella. Tutkimuksessa rakennettiin alan kirjallisuutta hyödyntäen tuotteistamisprosessi, jonka avulla asiantuntijapalveluita on mahdollista tuotteistaa Mantsinen Groupissa. Tuotteistamisprosessi toteutettiin yhden palvelun osalta. Tuotteistamisprosessi sisälsi muun muassa liiketoimintamallin laadinnan, palvelun paketoimisen, palvelun osien dokumentoinnin, koemarkkinoinnin sekä hinnoittelun. Tuotteistamista varten haastateltiin yhteensä 11 henkilöä. Lisäksi tehtiin yksi laajempi ryhmätyö. Kilpailijakatsauksessa hyödynnettiin julkisia tietolähteitä. Tutkimuksen tuloksena oli tuotteistettu, moduuleihin jaettu asiantuntijapalvelu sekä palveluun liittyvä dokumentointi. Yksityiskohtainen dokumentaatio on vain yrityksen sisäistä käyttöä varten, mutta yleiskuvaus palvelusta on esitetty tässä työssä. Tutkimuksessa todettiin, että tuotteistaminen on hyvä tapa järkeistää asiantuntijapalveluliiketoimintaa. Tutkimuksessa myös havaittiin, että koemarkkinoinnin toteuttaminen asiantuntijaprojektityössä on hankalaa.

Islandora Sync: Enabling Administrators and Developers

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

AOD 2.0: A category based submission add-on for DSpace 4.0

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

INSPIRE: contributions to Invenio from the leading High Energy Physics (HEP) platform

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Invenio as a platform to implement the SCOAP3 Repository

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014