Modeling and Analysis of Noise and Interconnects for On-Chip Communication Link Design

This thesis considers modeling and analysis of noise and interconnects in onchip communication. Besides transistor count and speed, the capabilities of a modern design are often limited by on-chip communication links. These links typically consist of multiple interconnects that run parallel to each other for long distances between functional or memory blocks. Due to the scaling of technology, the interconnects have considerable electrical parasitics that affect their performance, power dissipation and signal integrity. Furthermore, because of electromagnetic coupling, the interconnects in the link need to be considered as an interacting group instead of as isolated signal paths. There is a need for accurate and computationally effective models in the early stages of the chip design process to assess or optimize issues affecting these interconnects. For this purpose, a set of analytical models is developed for on-chip data links in this thesis. First, a model is proposed for modeling crosstalk and intersymbol interference. The model takes into account the effects of inductance, initial states and bit sequences. Intersymbol interference is shown to affect crosstalk voltage and propagation delay depending on bus throughput and the amount of inductance. Next, a model is proposed for the switching current of a coupled bus. The model is combined with an existing model to evaluate power supply noise. The model is then applied to reduce both functional crosstalk and power supply noise caused by a bus as a trade-off with time. The proposed reduction method is shown to be effective in reducing long-range crosstalk noise. The effects of process variation on encoded signaling are then modeled. In encoded signaling, the input signals to a bus are encoded using additional signaling circuitry. The proposed model includes variation in both the signaling circuitry and in the wires to calculate the total delay variation of a bus. The model is applied to study level-encoded dual-rail and 1-of-4 signaling. In addition to regular voltage-mode and encoded voltage-mode signaling, current-mode signaling is a promising technique for global communication. A model for energy dissipation in RLC current-mode signaling is proposed in the thesis. The energy is derived separately for the driver, wire and receiver termination.

Exploring Adaptive Implementation of On-Chip Networks

As technology geometries have shrunk to the deep submicron regime, the communication delay and power consumption of global interconnections in high performance Multi- Processor Systems-on-Chip (MPSoCs) are becoming a major bottleneck. The Network-on- Chip (NoC) architecture paradigm, based on a modular packet-switched mechanism, can address many of the on-chip communication issues such as performance limitations of long interconnects and integration of large number of Processing Elements (PEs) on a chip. The choice of routing protocol and NoC structure can have a significant impact on performance and power consumption in on-chip networks. In addition, building a high performance, area and energy efficient on-chip network for multicore architectures requires a novel on-chip router allowing a larger network to be integrated on a single die with reduced power consumption. On top of that, network interfaces are employed to decouple computation resources from communication resources, to provide the synchronization between them, and to achieve backward compatibility with existing IP cores. Three adaptive routing algorithms are presented as a part of this thesis. The first presented routing protocol is a congestion-aware adaptive routing algorithm for 2D mesh NoCs which does not support multicast (one-to-many) traffic while the other two protocols are adaptive routing models supporting both unicast (one-to-one) and multicast traffic. A streamlined on-chip router architecture is also presented for avoiding congested areas in 2D mesh NoCs via employing efficient input and output selection. The output selection utilizes an adaptive routing algorithm based on the congestion condition of neighboring routers while the input selection allows packets to be serviced from each input port according to its congestion level. Moreover, in order to increase memory parallelism and bring compatibility with existing IP cores in network-based multiprocessor architectures, adaptive network interface architectures are presented to use multiple SDRAMs which can be accessed simultaneously. In addition, a smart memory controller is integrated in the adaptive network interface to improve the memory utilization and reduce both memory and network latencies. Three Dimensional Integrated Circuits (3D ICs) have been emerging as a viable candidate to achieve better performance and package density as compared to traditional 2D ICs. In addition, combining the benefits of 3D IC and NoC schemes provides a significant performance gain for 3D architectures. In recent years, inter-layer communication across multiple stacked layers (vertical channel) has attracted a lot of interest. In this thesis, a novel adaptive pipeline bus structure is proposed for inter-layer communication to improve the performance by reducing the delay and complexity of traditional bus arbitration. In addition, two mesh-based topologies for 3D architectures are also introduced to mitigate the inter-layer footprint and power dissipation on each layer with a small performance penalty.

Venäläistä rulettia – Nuorten perhesuunnittelun esteet ja tarpeet Pietarissa ja Riiassa

Latviassa ja Venäjällä heikko demografinen tilanne on lisännyt keskustelua seksuaali- ja kansalaisoikeuksista sekä valtion merkityksestä niiden toteuttamisessa. Väestöpolitiikassa näkyy yhteiskunnallinen tilanne sekä sen kyky ja mahdollisuudet huomioida nuorten perhesuunnitteluun liittyviä tarpeita. Huomion kohteena on myös palvelujärjestelmä ja siinä toteutuva yksilöllinen taso. Tutkin perhesuunnittelua kokonaisvaltaisesti, mikä ilmenee erilaisten polkuriippuvuuksien tarkasteluina. Mielenkiintoiseksi kohteen tekee entisten sosialististen valtioiden erityislaatuisen murroksen läpikäyminen. Perhesuunnittelu on osa seksuaali- ja ihmisoikeuksia. Siihen kuuluu seksuaaliterveydestä tiedottaminen ja ohjaus sekä siihen liittyvät toimenpiteet. Perhesuunnittelu sisältää niin sosiaaliset, kasvatukselliset kuin lääketieteellisetkin näkökulmat. Siihen liitetään myös moraalisia ja taloudellisia näkemyksiä, sekä politiikkaa ja henkilökohtaisuutta. Tutkimustehtäväni on nuorten perhesuunnittelun esteet ja tarpeet Riiassa ja Pietarissa. Sovellan metodologisena lähestymistapana sosiaalihistoriallista ja etnografista tutkimusotetta, jolloin perinteen vaikutusten, kulttuuristen rakenteiden ja yksilöllisten toimintatapojen ymmärtäminen mahdollistuu. Aineisto koostuu viranomaishaastatteluista sosialismin kaudella toteutuneesta sekä nykyisestä perhesuunnittelusta ja nuorten haastatteluista Pietarissa ja Riiassa. Perehdyn myös lisääntymisterveyteen liittyviin sanomalehtiartikkeleihin sekä Latviassa että Venäjällä. Lisäksi havainnoin seksuaalineuvontatilanteita Pietarissa. Sekä sosialismin aikana että nykyään painottuvat väestönkasvun odotukset, joita tuetaan sukupuoli- ja moraalikasvatuksen avulla. Perhesuunnittelun esteiden analyysin tuloksissa on nähtävissä sosiaalisten olosuhteiden ja rakenteiden merkitys. Jälkisosialistisesta riskiyhteiskunnasta puuttuvat yhteiskuntaan integroitumisen mahdollistavat instituutiot. Tämä ilmenee yhteiskunnallisena vastuuttomuutena. Universaalit palvelut ovat suurelta osin peräisin sosialismin ajalta. Kaupalliset yritykset tekevät lähinnä teknisiä, yksittäisiä ehkäisyvälineisiin liittyviä interventioita nuorten elämään. Teini-ikäiset jätetään oman harkintansa varaan. Latviassa perhesuunnitteluun liittyvä ennalta ehkäisevä toiminta on huomioitu uudessa lisääntymisterveyslaissa, mutta sen heikko toteutus tuo sen lähelle neuvostoaikaista kulttuurikonventiota, jossa määrällisillä suoritteilla ja sekundaaripreventiolla on arvoa. Venäjällä voimavarat kohdentuvat jälkihuollon palveluihin. Foucaultin valta-analyysi kertoo strategiasta, jossa ihminen sisäistää vallankäytön osaksi omaa ajatteluaan ja toimintaansa. Tässä näkökulmassa yksilöllinen, yhteiskunnallinen ja historiallinen ulottuvuus limittyvät toisiinsa. Vallan muodot ovat yhteiskunnan rakenteissa. Väestöpolitiikan avulla tuotetaan tietoa ja muovataan hallitsemisen kohteita. Osa haastatelluista nuorista omaksui yhteiskunnan passiivisuuden osaksi omaa toimintaansa. He eivät tiedostaneet palvelujärjestelmän puutteita eivätkä kyseenalaistaneet sen oikeutusta. Myös lehtiartikkelit ja viranomaishaastattelut tukivat osittain seksuaalikasvatuksen sivuuttamista. Silloin hyväksyttävänä totuutena pidettiin väestöpolitiikkaa, jossa on annettu tilaa populistisille suuntauksille. Sekä Latviassa että Venäjällä ilmaistiin tavoitteita väestön kasvusta. Kansainvälisten seksuaalioikeuksien maihinnousu ei ole poistanut ääri uskonnollisten ja osittain kansalaisjärjestöjen puitteissa tapahtuvaa perhesuunnittelun vastustusta. Näissä suuntauksissa vaikutetaan ihmisten moraaliin ja vastustetaan yhteiskunnan interventioita kieltämällä seksuaalikasvatus. Sosialismin aikana sosiaali- ja terveydenhuoltoa toteutettiin totalitaristisessa, suljetussa yhteiskunnassa tiukasti rajatuilla voimavaroilla. Tuolta ajalta peräisin oleva viranomaisten yleinen medikalisoitunut ja tekninen lähestymistapa estää osittain nuoren valtaistumista. Vieläkin heikko tiedottaminen ja puutteellinen koulutus vaikuttavat ammattilaisten keskuudessa. Yksi haitallisista perhesuunnitteluun kuuluvista uskomuksista oli hormonaalisen ehkäisyn aiheuttamat ongelmat. Lisäksi pelättiin heikkotasoisesti tehtyjen aborttien aiheuttavan hedelmättömyyttä. Uskomukset ovat eläneet vieläkin, kun osa asiantuntijoista kannusti ensimmäisen raskauden päättymistä synnytykseen. Näillä käsityksillä on ollut taipumus siirtyä sukupolvelta toiselle myös kansalaisten keskuudessa. Sukuyhteisöjen ja verkostojen oleellinen merkitys teini-ikäisen arjessa ja selviytymisessä painotti perinteistä sosialisaatiota. Uskomusten lisäksi nuorten heikko taloudellinen tilanne on ohjannut heitä ehkäisyssä luonnonmenetelmien käyttöön. Neuvostoaikainen seksuaalikielteisyyden perinne on vaikuttanut myös sukupolvien kyvyttömyyteen keskustella aiheesta. Yleisen ennaltaehkäisevän neuvonnan puuttuminen on suunnannut suurta osaa nuoria mallioppimiseen, jossa esimerkit ovat nousseet satunnaisista löydöistä. Toisaalta työntekijöiden neuvokkuus ja aloitteellisuus erilaisissa ohjaamistilanteissa, toimintatavoissa ja instituutioiden perustamisissa kuvaavat eettistä vastuunottoa ja paneutumista nuorten perhesuunnittelun toteutumiseen sekä sen mahdollisuuksiin. Perhesuunnitteluun liittyvän tiedonsaannin parantamiseksi viranomaiset ovat aloittaneet nuorten vertaisryhmiä. Lisäksi yhtenä uutena virallisena lähestymistapana oli neuvostoaikana kielletty psykoterapeuttisen suuntauksen avoin käyttöönotto. Myös nuorille suunnattuja palveluja niin lainsäädännön kuin instituutioiden tasolla on saatu aikaan. Nämä myönteiset tapaukset jäivät kuitenkin yksittäisiksi, osittain joidenkin työntekijöiden omakohtaisen sitoutumisen varaan toimiviksi. Tutkimuksessa nousee esiin yhteiskunnan vastuu erityisesti haavoittuvien ryhmien kohdalla. Nuoret ovat tiedoiltaan ja kokemuksiltaan heikossa asemassa. Sosiaalipoliittisesta näkökulmasta julkisilla ja ennaltaehkäisevillä palveluilla on keskeinen merkitys etenkin niiden kohdalla, jotka tarvitsevat runsaasti palveluja. Usein tähän ryhmään kuuluvat ovat passiivisia tiedon hakijoita. Tutkimus tuo esille perhesuunnittelun palvelujärjestelmään ja sen kohderyhmään kuuluvan moniulotteisuuden, jossa toisiinsa nivoutuvat kulttuuriset myytit, uskomukset, tabut, toimintatavat ja tietämys. Näiden polkujen avaaminen tässä tutkimuksessa edistää perhesuunnittelun esteiden tunnistamista ja niihin soveltuvien ratkaisukeinojen löytymistä.

Taksamittarin EMC-testaus

Työssä esitellään ajoneuvokäytössä elektronisiin laitteisiin mahdollisesti vaikuttavat sähkömagneettiset häiriöt, kytkeytyneiden häiriöiden siirtotiet sekä kytkeytyneiden häiriöiden muodot. Työssä käydään läpi lyhyesti tapoja joilla häiriön syntyä voidaan vähentää. Lisäksi työssä käydään läpi lyhyesti tapoja joilla häiriön vaikutusta voidaan pyrkiä vähentämään. Työssä esitellään laite, jonka mahdollisuuksia toimia taksin taksamittarina tutkitaan. Taksin taksamittarin tulee täyttää Euroopan Unionin alueella myynnissä ollessaan täyttää Euroopan Unionin asettama direktiivi ajoneuvoelektroniikalle, lisäksi laitteen tulee täyttää Euroopan Unionin mittalaitedirektiivin asettamat vaatimukset. Esitellyn laiteen häiriönsietoa testataan sähkökenttää vastaan Euroopan Unionin asettaman direktiivin mukaisesti.

Development of Cost Estimation with Feedback Information in EPCM Business

Target company of this study is a large machinery company, which is, inter alia, engaged in energy and pulp engineering, procurement and construction management (EPCM) supply business. The main objective of this study was to develop cost estimation of the target company by providing more accurate, reliable and up-to-date information through enterprise resource planning (ERP) system. Another objective was to find cost-effective methods to collect total cost of ownership information to support more informed supplier selection decision making. This study is primarily action-oriented, but also constructive, and it can be divided in two sections: theoretical literature review and empirical study on the abovementioned part of the target company’s business. Development of information collection is, in addition to literature review, based on nearly 30 qualitative interviews of employees at various organizational units, functions and levels at the target company. At the core of development was to make initial data more accurate, reliable and available, a necessary prerequisite for informed use of the information. Certain development suggestions and paths were presented in order to regain confidence in ERP system as information source by reorganizing work breakdown structure and by complementing mere cost information with quantitative, technical and scope information. Several methods to use the information ever more effectively were also discussed. While implementation of the development suggestions outreached the scope of this study, it was forwarded in test environment and interest groups.

Social ventures : the development of the theory of sustainable contributive advantage and initial empirical tests

This thesis attempts to fill gaps in both a theoretical basis and an operational and strategic understanding in the areas of social ventures, social entrepreneurship and nonprofit business models. This study also attempts to bridge the gap in strategic and economic theory between social and commercial ventures. More specifically, this thesis explores sustainable competitive advantage from a resource-based theory perspective and explores how it may be applied to the nonmarket situation of nonprofit organizations and social ventures. It is proposed that a social value-orientation of sustainable competitive advantage, called sustainable contributive advantage, provides a more realistic depiction of what is necessary in order for a social venture to perform better than its competitors over time. In addition to providing this realistic depiction, this research provides a substantial theoretical contribution in the area of economics, social ventures, and strategy research, specifically in regards to resource-based theory. The proposed model for sustainable contributive advantage uses resource-based theory and competitive advantage in order to be applicable to social ventures. This model proposes an explanation of a social venture’s ability to demonstrate consistently superior performance. In order to determine whether sustainable competitive advantage is in fact, appropriate to apply to both social and economic environments, quantitative analyses are conducted on a large sample of nonprofit organizations in a single industry and then compared to similar quantitative analyses conducted on commercial ventures. In comparing the trends and strategies between the two types of entities from a quantitative perspective, propositions are developed regarding a social venture’s resource utilization strategies and their possible impact on performance. Evidence is found to support the necessity of adjusting existing models in resource-based theory in order to apply them to social ventures. Additionally supported is the proposed theory of sustainable contributive advantage. The thesis concludes with recommendations for practitioners, researchers and policy makers as well as suggestions for future research paths.

Exploration and Design of Power-Efficient Networked Many-Core Systems

Multiprocessing is a promising solution to meet the requirements of near future applications. To get full benefit from parallel processing, a manycore system needs efficient, on-chip communication architecture. Networkon- Chip (NoC) is a general purpose communication concept that offers highthroughput, reduced power consumption, and keeps complexity in check by a regular composition of basic building blocks. This thesis presents power efficient communication approaches for networked many-core systems. We address a range of issues being important for designing power-efficient manycore systems at two different levels: the network-level and the router-level. From the network-level point of view, exploiting state-of-the-art concepts such as Globally Asynchronous Locally Synchronous (GALS), Voltage/ Frequency Island (VFI), and 3D Networks-on-Chip approaches may be a solution to the excessive power consumption demanded by today’s and future many-core systems. To this end, a low-cost 3D NoC architecture, based on high-speed GALS-based vertical channels, is proposed to mitigate high peak temperatures, power densities, and area footprints of vertical interconnects in 3D ICs. To further exploit the beneficial feature of a negligible inter-layer distance of 3D ICs, we propose a novel hybridization scheme for inter-layer communication. In addition, an efficient adaptive routing algorithm is presented which enables congestion-aware and reliable communication for the hybridized NoC architecture. An integrated monitoring and management platform on top of this architecture is also developed in order to implement more scalable power optimization techniques. From the router-level perspective, four design styles for implementing power-efficient reconfigurable interfaces in VFI-based NoC systems are proposed. To enhance the utilization of virtual channel buffers and to manage their power consumption, a partial virtual channel sharing method for NoC routers is devised and implemented. Extensive experiments with synthetic and real benchmarks show significant power savings and mitigated hotspots with similar performance compared to latest NoC architectures. The thesis concludes that careful codesigned elements from different network levels enable considerable power savings for many-core systems.

Loviisan ydinvoimalaitoksen kaapelireittien tiedonhallinnan kehittäminen paloriskitutkimusta varten

Tässä diplomityössä kehitetään Loviisan voimalaitoksen todennäköisyyspohjaisen paloriskianalyysin kaapelitietokantaa tulevaisuuden haasteita varten. Tietokannan kehittämistä varten tutustutaan todennäköisyyspohjaiseen riskianalyysiin varsin-kin paloriskianalyysin osalta. Käytännönläheisempää kehittämistä varten tutustu-taan voimalaitoksella nykyisin käytössä oleviin kaapelitietokantoihin: paloriski-tutkimusta varten laadittuun PSA-ELTIEen, kunnossapidon tiedonhallintajärjes-telmä LOMAXiin, sähkö- ja automaatiosuunnitteluyksikköjen arkistoihin sekä automaatiouudistuksen tietokantaan. Tietokannan käytännönläheisempien ominai-suuksien selvittämiseksi voimalaitoksella kokeiltiin kenttätarkastusmenetelmää, joka on ensisijainen kaapelikartoitusmenetelmä. Tietokantoihin tutustumisen perusteella vaihtoehtoisiksi tulevaisuuden tietokan-noiksi mietittiin LOMAXia, PSA-ELTIEtä tai uutta tietokantaa. Tulevaisuuden tietokantavaihtoehdoksi on päädytty ehdottamaan LOMAXia, joka vaatii vähem-män muutoksia muihin vaihtoehtoihin nähden. Tällainen laajalti käytössä oleva yhteinen tietokanta mahdollistaa sen, että tiedot ovat helpommin ja varmemmin kaikkien niitä tarvitsevien käytettävissä ja asiantuntijoiden muokattavissa, millä myös varmistetaan tietojen oikeellisuutta ja pysymistä ajan tasalla. Tulevaan LOMAX päivitykseen on ehdotettu tarpeellisia tietokenttien lisäyksiä ja kaapeli-hierarkian parantamista kaapelitietokannaksi käyttöönottamista varten.

Asiakastarpeiden kartoitus kuljetusten häiriöiden analysoinnin ja hallinnan kehittämiseksi

Tämä diplomityö on tehty osana Logproof-tutkimushanketta, joka keskittyy häiriöttömyyden hallintaan logistisissa monitoimijaverkostoissa. Työn tavoitteena on selvittää logistiikkaintensiivisten yritysten tarpeita kuljetusten häiriöiden analysoinnin ja hallinnan kehittämiseksi ja siten ennakoivan riskienhallinnan edistämiseksi. Asiakastarvetietoa on kerätty hyödyntäen puolistrukturoituja haastatteluja ja tietoa on analysoitu käyttäen hyväksi sisällönanalyysiä sekä tulkintataulukkoa. Kiinnostus kuljetusten häiriöitä ja niiden analysointia kohtaan on kasvamassa ja yrityksissä tiedostetaan hallintajärjestelmien ja analysoinnin tarve tulevaisuudessa. Kirjallisuuskatsauksen ja asiakastarpeiden kartoituksen avulla työssä on selvitetty yritysten nykytilaa kuljetusten häiriöiden hallinnan ja analysoinnin osalta ja tarkasteltu mahdollisia tulevaisuuden kehityssuuntia analysoimalla asiakkaiden näkyviä ja piileviä tarpeita. Työssä on edellisten lisäksi tarkasteltu, kuinka havaitut asiakastarpeet ovat sovitettavissa yhteen case-yrityksen, Oy Lars Krogius Ab:n, ARS (Analytic Rou-ting Solution) -palvelun ominaispiirteiden kanssa. Työ tarjoaa tarvetietoa palvelun tulevaisuuden kehitykselle.

Nordic banks’ entry into the Russian market: motives, processes and challenges

The importance of services in the global economy has grown steadily in the past decades and the growth of services sector’s direct investments has been increasing. Nowadays, all companies are influenced by the much changing global environment and the financial services companies are no exception. The internationalization of financial services companies is an expanding and accelerating phenomenon which has various motivations. The overall aim of this thesis is to shed light on the market entry processes of the Nordic financial services companies when they have entered the Russian market. In this study, the factors affecting Nordic banks’ market entry to Russia are presented in order to better understand what have been the main motives for market entry, what kind of processes the banks have used and what kind of challenges they have faced along the way. A case study approach was used in conducting the empirical research and it aims at investigating a specific case: Nordic banks’ entry into the Russian market. The empirical research was carried out by conducting qualitative interviews for employees involved in entry processes of the case banks. These interviews aimed at examining the Nordic banks’ motives for entering the Russian financial market. This includes reflections on the reasons why the studied banks have decided to enter Russia and what have been the motives behind these decisions. Also, the market entry processes the banks have used when they have entered the Russian market were investigated. The findings allowed comparing the related theories and different market entry modes the case banks have used. Furthermore, the market-related challenges faced by the case banks were mapped and described. In addition, the main factors related to the entry processes of the studied banks were identified and key elements of successful market entry were mapped. The findings suggest that the main motivator for banks have been to follow their customers and hence, increase the revenues and add the value to the shareholders; consequently, being a win-win-win situation to all the related parties. It was also discovered that the banks market entry processes have had resemblances but the banks have taken different paths to get where they are nowadays. As the Russian market environment differs from the one in Nordic countries, also challenges were faced by the case banks. However, the internal challenges were considered more troublesome than the external ones. As the foreign market entry process is complex as well as time and resources consuming, it is vital to understand the specifics of the target market, organizational capabilities and individuals enabling a successful entry process.

On Energy Efficient Computing Platforms

In accordance with the Moore's law, the increasing number of on-chip integrated transistors has enabled modern computing platforms with not only higher processing power but also more affordable prices. As a result, these platforms, including portable devices, work stations and data centres, are becoming an inevitable part of the human society. However, with the demand for portability and raising cost of power, energy efficiency has emerged to be a major concern for modern computing platforms. As the complexity of on-chip systems increases, Network-on-Chip (NoC) has been proved as an efficient communication architecture which can further improve system performances and scalability while reducing the design cost. Therefore, in this thesis, we study and propose energy optimization approaches based on NoC architecture, with special focuses on the following aspects. As the architectural trend of future computing platforms, 3D systems have many bene ts including higher integration density, smaller footprint, heterogeneous integration, etc. Moreover, 3D technology can signi cantly improve the network communication and effectively avoid long wirings, and therefore, provide higher system performance and energy efficiency. With the dynamic nature of on-chip communication in large scale NoC based systems, run-time system optimization is of crucial importance in order to achieve higher system reliability and essentially energy efficiency. In this thesis, we propose an agent based system design approach where agents are on-chip components which monitor and control system parameters such as supply voltage, operating frequency, etc. With this approach, we have analysed the implementation alternatives for dynamic voltage and frequency scaling and power gating techniques at different granularity, which reduce both dynamic and leakage energy consumption. Topologies, being one of the key factors for NoCs, are also explored for energy saving purpose. A Honeycomb NoC architecture is proposed in this thesis with turn-model based deadlock-free routing algorithms. Our analysis and simulation based evaluation show that Honeycomb NoCs outperform their Mesh based counterparts in terms of network cost, system performance as well as energy efficiency.

Adult education policy in the European Union during the Lisbon decade : the shift to vocational adult learning and work skills matching

This doctoral dissertation investigates the adult education policy of the European Union (EU) in the framework of the Lisbon agenda 2000–2010, with a particular focus on the changes of policy orientation that occurred during this reference decade. The year 2006 can be considered, in fact, a turning point for the EU policy-making in the adult learning sector: a radical shift from a wide--ranging and comprehensive conception of educating adults towards a vocationally oriented understanding of this field and policy area has been observed, in particular in the second half of the so--called ‘Lisbon decade’. In this light, one of the principal objectives of the mainstream policy set by the Lisbon Strategy, that of fostering all forms of participation of adults in lifelong learning paths, appears to have muted its political background and vision in a very short period of time, reflecting an underlying polarisation and progressive transformation of European policy orientations. Hence, by means of content analysis and process tracing, it is shown that the new target of the EU adult education policy, in this framework, has shifted from citizens to workers, and the competence development model, borrowed from the corporate sector, has been established as the reference for the new policy road maps. This study draws on the theory of governance architectures and applies a post-ontological perspective to discuss whether the above trends are intrinsically due to the nature of the Lisbon Strategy, which encompasses education policies, and to what extent supranational actors and phenomena such as globalisation influence the European governance and decision--making. Moreover, it is shown that the way in which the EU is shaping the upgrading of skills and competences of adult learners is modeled around the needs of the ‘knowledge economy’, thus according a great deal of importance to the ‘new skills for new jobs’ and perhaps not enough to life skills in its broader sense which include, for example, social and civic competences: these are actually often promoted but rarely implemented in depth in the EU policy documents. In this framework, it is conveyed how different EU policy areas are intertwined and interrelated with global phenomena, and it is emphasised how far the building of the EU education systems should play a crucial role in the formation of critical thinking, civic competences and skills for a sustainable democratic citizenship, from which a truly cohesive and inclusive society fundamentally depend, and a model of environmental and cosmopolitan adult education is proposed in order to address the challenges of the new millennium. In conclusion, an appraisal of the EU’s public policy, along with some personal thoughts on how progress might be pursued and actualised, is outlined.

Deregulation’s Impact on the Railway Freight Transport Sector’s Future in the Baltic Sea Region

The European transport market has confronted several changes during the last decade. Due to European Union legislative mandates, the railway freight market was deregulated in 2007. The market followed the trend started by other transport modes as well as other previously regulated industries such as banking, telecommunications and energy. Globally, the first country to deregulate the railway freight market was the United States, with the introduction of the Staggers Rail Act in 1980. Some European countries decided to follow suit already before regulation was mandated; among the forerunners were the United Kingdom, Sweden and Germany. The previous research has concentrated only on these countries, which has provided an interesting research gap for this thesis. The Baltic Sea Region consists of countries with different kinds of liberalization paths, including Sweden and Germany, which have been on the frontline, whereas Lithuania and Finland have only one active railway undertaking, the incumbent. The transport market of the European Union is facing further challenges in the near future, due to the Sulphur Directive, oil dependency and the changing structure of European rail networks. In order to improve the accessibility of this peripheral area, further action is required. This research focuses on topics such as the progression of deregulation, barriers to entry, country-specific features, cooperation and internationalization. Based on the research results, it can be stated that the Baltic Sea Region’s railway freight market is expected to change in the future. Further private railway undertakings are anticipated, and these would change the market structure. The realization of European Union’s plans to increase the improved rail network to cover the Baltic States is strongly hoped for, and railway freight market counterparts inside and among countries are starting to enhance their level of cooperation. The Baltic Sea Region countries have several special national characteristics which influence the market and should be taken into account when companies evaluate possible market entry actions. According to thesis interviews, the Swedish market has a strong level of cooperation in the form of an old-boy network, and is supported by a positive attitude of the incumbent towards the private railway undertakings. This has facilitated the entry process of newcomers, and currently the market has numerous operating railway undertakings. A contrary example was found from Poland, where the incumbent sent old rolling stock to the scrap yard rather than sell it to private railway undertakings. The importance of personal relations is highlighted in Russia, followed by the railway market’s strong political bond with politics. Nonetheless, some barriers to entry are shared by the Baltic Sea Region, the main ones being acquisition of rolling stock, bureaucracy and needed investments. The railway freight market is internationalizing, which is perceived via several alliances as well as the increased number of mergers and acquisitions. After deregulation, markets seem to increase the number of railway undertakings at a rather fast pace, but with the passage of time, the larger operators tend to acquire smaller ones. Therefore, it is expected that in a decade’s time, the number of railway undertakings will start to decrease in the deregulation pioneer countries, while the ones coming from behind might still experience an increase. The Russian market is expected to be totally liberalized, and further alliances between the Russian Railways and European railway undertakings are expected to occur. The Baltic Sea Region’s railway freight market is anticipated to improve, and, based on the interviewees’ comments, attract more cargoes from road to rail.

Modeling of fireside deposit formation in two industrial furnaces

Fireside deposits can be found in many types of utility and industrial furnaces. The deposits in furnaces are problematic because they can reduce heat transfer, block gas paths and cause corrosion. To tackle these problems, it is vital to estimate the influence of deposits on heat transfer, to minimize deposit formation and to optimize deposit removal. It is beneficial to have a good understanding of the mechanisms of fireside deposit formation. Numerical modeling is a powerful tool for investigating the heat transfer in furnaces, and it can provide valuable information for understanding the mechanisms of deposit formation. In addition, a sub-model of deposit formation is generally an essential part of a comprehensive furnace model. This work investigates two specific processes of fireside deposit formation in two industrial furnaces. The first process is the slagging wall found in furnaces with molten deposits running on the wall. A slagging wall model is developed to take into account the two-layer structure of the deposits. With the slagging wall model, the thickness and the surface temperature of the molten deposit layer can be calculated. The slagging wall model is used to predict the surface temperature and the heat transfer to a specific section of a super-heater tube panel with the boundary condition obtained from a Kraft recovery furnace model. The slagging wall model is also incorporated into the computational fluid dynamics (CFD)-based Kraft recovery furnace model and applied on the lower furnace walls. The implementation of the slagging wall model includes a grid simplification scheme. The wall surface temperature calculated with the slagging wall model is used as the heat transfer boundary condition. Simulation of a Kraft recovery furnace is performed, and it is compared with two other cases and measurements. In the two other cases, a uniform wall surface temperature and a wall surface temperature calculated with a char bed burning model are used as the heat transfer boundary conditions. In this particular furnace, the wall surface temperatures from the three cases are similar and are in the correct range of the measurements. Nevertheless, the wall surface temperature profiles with the slagging wall model and the char bed burning model are different because the deposits are represented differently in the two models. In addition, the slagging wall model is proven to be computationally efficient. The second process is deposit formation due to thermophoresis of fine particles to the heat transfer surface. This process is considered in the simulation of a heat recovery boiler of the flash smelting process. In order to determine if the small dust particles stay on the wall, a criterion based on the analysis of forces acting on the particle is applied. Time-dependent simulation of deposit formation in the heat recovery boiler is carried out and the influence of deposits on heat transfer is investigated. The locations prone to deposit formation are also identified in the heat recovery boiler. Modeling of the two processes in the two industrial furnaces enhances the overall understanding of the processes. The sub-models developed in this work can be applied in other similar deposit formation processes with carefully-defined boundary conditions.

Numerical Simulation of Stochastic Di erential Equations

Stochastic differential equation (SDE) is a differential equation in which some of the terms and its solution are stochastic processes. SDEs play a central role in modeling physical systems like finance, Biology, Engineering, to mention some. In modeling process, the computation of the trajectories (sample paths) of solutions to SDEs is very important. However, the exact solution to a SDE is generally difficult to obtain due to non-differentiability character of realizations of the Brownian motion. There exist approximation methods of solutions of SDE. The solutions will be continuous stochastic processes that represent diffusive dynamics, a common modeling assumption for financial, Biology, physical, environmental systems. This Masters' thesis is an introduction and survey of numerical solution methods for stochastic differential equations. Standard numerical methods, local linearization methods and filtering methods are well described. We compute the root mean square errors for each method from which we propose a better numerical scheme. Stochastic differential equations can be formulated from a given ordinary differential equations. In this thesis, we describe two kind of formulations: parametric and non-parametric techniques. The formulation is based on epidemiological SEIR model. This methods have a tendency of increasing parameters in the constructed SDEs, hence, it requires more data. We compare the two techniques numerically.