A Model for Product Transfer Project

In this thesis a model for managing the product data in a product transfer project was created for ABB Machines. This model was then applied for the ongoing product transfer project during its planning phase. Detailed information about the demands and challenges in product transfer projects was acquired by analyzing previous product transfer projects in participating organizations. This analysis and the ABB Gate Model were then used as a base for the creation of the model for managing the product data in a product transfer project. The created model shows the main tasks during each phase in the project, their sub-tasks and relatedness on general level. Furthermore the model emphasizes need for detailed analysis of the situation during the project planning phase. The created model for managing the product data in a product transfer project was applied into ongoing project two main areas; manufacturing instructions and production item data. The results showed that the greatest challenge considering the product transfer project in previously mentioned areas is the current state of the product data. Based on the findings, process and resource proposals for both the ongoing product transfer project and the BU Machines were given. For manufacturing instructions it is necessary to create detailed process instructions in receiving organizations own language for each department so that the manufacturing instructions can be used as a training material during the training in sending organization. For production item data the English version of the bill of materials needs to be fully in English. In addition it needs to be ensured that bill of materials is updated and these changes implemented before the training in sending organization begins.

Sähkösuunnittelun projektityön hallinta ja kehittäminen - Management and development of project work in electrical

Työssä on tutkittu sähkösuunnittelun projektityön hallintaa ja kehittämistä. Tavoitteena oli löytää ongelmia ja pyrkiä korjaamaan niitä, jotta suunnittelu olisi mahdollisimman toimivaa. Tutkimus perustuu kirjallisuuteen ja haastatteluihin. Työssä perehdytään kirjallisuuden avulla projektin peruskäsitteisiin ja hallintaan sekä sähkösuunnittelun projektin yleiseen toteutukseen. Haastattelujen avulla on selvitetty tämän hetkistä tilannetta sähkösuunnitteluprojektin hallinnasta ja siihen liittyvistä ongelmista Pöyryn Kouvolan konttorissa. Työn tuloksena on selvitetty merkittävimpiä ongelmia, jotka esiintyvät sähkösuunnitteluprojektissa. Työ keskittyy pääosin sähkösuunnitteluprojektin hallinnallisiin ongelmiin ja niiden toteutukseen. Kirjallisuuden ja haastattelujen pohjalta on koottu ohjeita sähkösuunnittelun projektinhallintaan

Supplier's position in project marketing networks

The present study explores relationships between project marketers and their customers in project marketing context. The purpose of the study is to increase the understanding on supplier’s position in project marketing networks. Project marketing is representing a high volume in the international business, and the industrial network approach and the project marketing research cannot fully explain a supplier’s position in project marketing networks. Increased knowledge on project networks can also contribute to industrial marketing research more generally. Data for the present study was collected firstly during the pilot case study from project buyers in the paper and the steel industry in interviews. Secondly an entire project marketing case concerning a steel industry case was used as a data source. The data included interviews, correspondence between the supplier and the buyer, and project documents. The data of the pilot case was analysed with contents analysis, and in the case a deeper analysis based on the developed Stage Dimension framework was used. Supplier’s position in project marketing networks is a hierarchical and dynamic concept including a supplier’s position on the highest level. The dimensions of the position concept are the intermediate level, and the dimensions are based on the underlying components. Supplier’s position is composed from four organization related dimensions, and two individual actor related dimensions. The composition of the supplier’s position varies during the project marketing process, and consequently the relative importance of the dimensions is changing over the process. Supplier’s position in project marketing networks is shaped by incremental and radical changes. Radical changes are initiated by critical events. The study contributes to the research of industrial networks and project marketing. The theoretical contribution of the study is threefold: firstly it proposes a structure of the position concept in project marketing networks, secondly it proposes the Position Stage Dimension Component (PSDC) model for the development of supplier’s position during the project marketing process, and thirdly the study widens the critical event concept to cover the project marketing process both on the organizational and individual level. In addition to the theoretical contributions there are several managerial implications for planning and implementing marketing strategies in the project context.

Työturvallisuusriskien arviointiprosessi

Työturvallisuusriskien arviointi on oleellinen osa nykyaikaisen organisaation turvallisuusjohtamista. Työtapaturmat aiheuttavat organisaatioille merkittäviä kustannuksia, joita voidaan kuitenkin vähentää panostamalla työturvallisuusriskien hallintaan. Yksi riskienhallintakeino ovat henkilökohtaiset suojaimet. Suojainten ominaisuuksien tulee perustua työn arvioituihin riskeihin. Tässä työssä kuvataan Ovako Bar Oy Ab Imatran terästehtaalla suoritettu työturvallisuusriskienarviointiprosessi, sekä arvioinnin perusteella tehty henkilökohtaisten suojainten määrittäminen. Projektikuvauksen lisäksi työssä esitetään menetelmiä, joilla organisaatioiden on mahdollista kehittää työn riskien arviointia ja turvallisuuttaan yleisesti.

Factors of customer project profitability in an engineering industrial enterprise

The purpose of the study is to find factors affecting projects' profitability in project business. The issue is approached from customer profitability and project management point of view. The study has been made for a big Finnish company acting in a global market place. The research method is quantitative. Research hypotheses are based on the literature. The used database is originated from the company's ERP- (enterprise resource planning) and project financial follow-up —system. The findings of the study supported the hypotheses weakly. Obviously profitability fluctuated depending on a customer and a project manager. The reasons could not be justified with the variables used in the research.

Assessment of an information product project success: case business blueprint

The objective of this study was to find out how project success can be measured in a case where the output of a project is an intangible information product, what kind of framework can be used to evaluate the project success, and how the project assessment can be done in practice. As a case example, the success of a business blueprint project was assessed from the product point of view. A framework for assessing business blueprint project success was made based on a literature review. Furthermore, separate frameworks for measuring information product quality and project costs were developed. The theory of business blueprinting was discovered not to be firmly institutionalized and it is briefly covered in the thesis. The possible net benefits from the strategic business process harmonization were noted to be much more significant than the costs of the business blueprint project. The project was seen as a sufficient success from the viewpoint of the created output.

Management of Nitrogen Oxides Reduction Project in a Cement Plant

The main aim of this study was to develop the project management framework model which would serve as the new model to follow for upcoming projects at the Lappeenranta cement plant. The other goal was to execute the SNCR (selective non catalytic reduction) project successfully so that the nitrogen oxides emissions are below the stated emission limit when the new emission limit comes into effect beginning in July, 2008. Nitrogen oxides, project management aspects, SNCR and the invested system are explained in the theory part. In the practical part of the study, the SNCR project in the Lappeenranta cement plant was executed and the findings were documented. In order to reach the aim of this study, a framework of project management was made. The framework is based on the executed SNCR project, previous projects in the cement plant and on the available literature relating to the subject matter. The developed project turned out to be successful.

Model-based study of a chemical-looping combustion process

Chemical-looping combustion (CLC) is a novel combustion technology with inherent separation of the greenhouse gas CO2. The technique typically employs a dual fluidized bed system where a metal oxide is used as a solid oxygen carrier that transfers the oxygen from combustion air to the fuel. The oxygen carrier is looping between the air reactor, where it is oxidized by the air, and the fuel reactor, where it is reduced by the fuel. Hence, air is not mixed with the fuel, and outgoing CO2 does not become diluted by the nitrogen, which gives a possibility to collect the CO2 from the flue gases after the water vapor is condensed. CLC is being proposed as a promising and energy efficient carbon capture technology, since it can achieve both an increase in power station efficiency simultaneously with low energy penalty from the carbon capture. The outcome of a comprehensive literature study concerning the current status of CLC development is presented in this thesis. Also, a steady state model of the CLC process, based on the conservation equations of mass and energy, was developed. The model was used to determine the process conditions and to calculate the reactor dimensions of a 100 MWth CLC system with bunsenite (NiO) as oxygen carrier and methane (CH4) as fuel. This study has been made in Oxygen Carriers and Their Industrial Applications research project (2008 – 2011), funded by the Tekes – Functional Material program. I would like to acknowledge Tekes and participating companies for funding and all project partners for good and comfortable cooperation.

The Management of Intellectual Capital in the Early Phases of Project Marketing

This study aims at enhancing understanding and deriving new constructs about the management of intellectual capital in the early phases of project marketing. The research methodology employed is deductive; conceptual reasoning is based on existing literature. The study's knowledge base is drawn from the bodies of literature dealing with project, relationship, and industrial marketing, as well as from the literature dealing with mechanical engineering, network approach, systems selling, R&D, project portfolio, strategic, financial, and knowledge management. As a result, three processes, 32 summaries and 19 conclusions give to the management of intellectual capital meaning in the context of project marketing. These conclusions and synthesis are proposed to improve the existing concepts and models in project marketing.

Design of an Event Based Messaging System

B2B document handling is moving from paper to electronic networks and electronic domain very rapidly. Moving, handling and transforming large electronic business documents requires a lot from the systems handling them. This paper explores new technologies such as SOA, event-driven systems and ESB and a scalable, event-driven enterprise service bus is created to demonstrate these new approaches to message handling. As an end result, we have a small but fully functional messaging system with several different components. This is the first larger Java-project done in-house, so on the side we developed our own set of best practices of Java development, setting up configurations, tools, code repositories and class naming and much more.

Trolley R&D project for a small portal log yard crane

This master’s thesis was done for Andritz Inc. Atlanta Georgia. The purpose of the thesis was to develop a new trolley for a small portal log yard crane. In the beginning of the thesis the basic principles of the systematic design processes have been described, along which the design work of the trolley has proceeded. The second literature part consists of the design and dimensioning of the welded steel structures under fatigue loading. The design work of the trolley consists of the engineering and the selection of the mechanical components and the design of the load carrying structure for the trolley. The realization of the steel structure of the trolley is based on the fatigue and static dimensioning. The fatigue dimensioning is grounded in the life expectations estimated for the trolley and the static dimensioning is based on the CMAA guidelines. The computer aided element method was utilized in the design of the steel structure. The effective notch method and the hot spot method were used in the fatigue calculations. The trolley structure was carried out by using the sheet metal parts in order to manufacture the structure as effective and low cost way as possible. The corner stone of the dimensioning of the trolley structure was the utilization of the open profiles made of welded or cold formed sheet metals, which provide better weldability, weld inspection, access for repairs and corrosion protection. As a last part of the thesis a new trolley traveling system was developed. The distribution of the wheel loads of the trolley bogies on the main girder was also studied, which led to an innovative suspension arrangement between the trolley leg and the bogie. The new bogie solution increases the service life of the main girder of the crane and improves the stability of the bogies. The outcome of the thesis is an excellent trolley structure from the weight and the service life point of view.

Kuka suunnittelee mainokset? Tutkimus mainosalan kulisseista,yhteistyökäytännöistä ja ristiriidoista. Mainonnan suunnittelijan näkökulma

Tutkimus kuvaa tapahtumia mainonnan suunnittelun kulissien takana ja niiden vaikutusta suunnittelutyöhön mainonnan suunnittelijan näkökulmasta. Lähestymistapa on systeemiteoreettinen: tutkimuksessa tarkastellaan sekä mainostoimiston suunnittelijoiden, projektijohtajien ja muiden mainonnan suunnitteluun osallistuvien keskinäistä vuorovaikutusta että mainostoimiston ja mainoksia tilaavan asiakkaan vuorovaikutuksen asettamia rajoja ja mahdollisuuksia. Keskeinen työväline on Kurt Lewinin kentän käsite. Tutkimuksessa se konkretisoituu esitystavaksi mainonnan suunnittelun olennaisista piirteistä, jotka ovat toisistaan riippuvaisia. Tutkimusta pohjustaa ajatus mainonnan suunnittelun perusrakenteesta, joka on riippumaton taloudellisista, yhteiskunnallisista tai mainostoimialan liiketoimintaympäristön muutoksista. Mainostoimistossa työtä tehdään usein ryhmässä. Ydinryhmä muodostuu kirjoittavan ja visuaalisen suunnittelijan työparista, mutta projektijohtaja on avainasemassa hoitaessaan yhteydenpitoa mainostoimiston asiakkaaseen. Tutkimustyötä viitoittivat kysymykset mainonnan suunnittelijoiden tehtävästä ja asemasta, työssä koetuista haasteista sekä osuudesta ja vastuusta lopullisissa töissä. Keskiössä ovat suunnittelutyötä raamittavat haasteet, jotka ohjaavat suunnittelijoiden kykyjä ja haluja toteuttaa luovuuttaan. Tutkimus ammentaa teoreettisia aineksia työnjaon ja tiimityön käsitteiden ohella vallan tilanteisuudesta ja suhteista sekä sosiaalisen pääoman ja luottamuksen moniaineksisuudesta. Tutkimuksen aineisto kerättiin syksyllä 2008 ja alkuvuodesta 2009 haastattelemalla suomalaisten mainostoimistojen suunnittelijoita. Haastatteluaineisto koostuu kymmenestä ryhmähaastattelusta, johon kuhunkin osallistui 3–4 suunnittelijaa. Muu aineisto sisältää toimialan tilastoja ja julkaisuja sekä yksityisiä sähköpostikirjeenvaihtoja ja keskusteluja mainosammattilaisten kanssa. Haastatteluaineisto analysoitiin Milesin ja Hubermannin aineistolähtöisen sisällönanalyysin avulla ja sitä täydennettiin retorisella diskurssianalyysilla. Analyysin alkuvaiheessa koemetodina sovellettiin Straussin ja Corbinin aineistolähtöisen teorian (grounded theory) kolmivaiheista koodausta. Tutkimuksen tuloksena on malli mainonnan suunnittelun kentän jännitteistä, jotka johtavat toimimaan tietyllä tavalla. Mainonnan suunnittelijan tehtävinä näyttäytyvät vaikuttaminen, asiakkaan tarpeiden tunnistaminen ja tyydyttäminen sekä omakohtainen menestyminen. Suunnittelijan asema näyttää työssä koettujen haasteiden kautta häilyvän asiantuntijuuden ja alihankkijuuden välimaastossa. Työn henkilökohtaisina haasteina piirtyvät tarmokkuuden ja jatkuvan oivaltamisen vaateet. Ulkoisina tekijöinä talouden, teknologian ja sen myötä median murros sekä haastaa että kehittää: alituiseen kiireeseen näytetään verhoavan pulmia, joiden todellinen alkuperä paikantuu muualle. Keskeiset ristiriidat ja toiminnan edellytykset ilmenevät juuri yhteistyössä: mainostoimiston sisäinen yhteistyö ja asiakkaan antama palaute ovat merkittäviä tekijöitä luottamuksen taustalla. Siten avoin ja vastavuoroinen kommunikaatio piirtyy olennaiseksi asetettujen tavoitteiden saavuttamisessa ja asiakkaan menestymisessä. Mainonnan suunnittelussa tärkeäksi kysymykseksi nousevat portinvartijoiden roolit. Mainostoimiston sisäisessä työskentelyssä projektijohtajat hallinnoivat suunnitteluresursseja, välittävät tietoa asiak kaalta suunnittelijalle ja päinvastoin sekä tekevät tärkeimmät päätökset. Asiakkaan puolella mainoksia tilaava asiakashenkilö hallinnoi valjastamiaan resursseja, mutta varsinainen päätöksenteko tapahtuu tämän esimiehen toimesta. Tulosten valossa on perusteltua uskoa, että mainonnan suunnittelijat kokevat oman työnsä arvon alentuneen ja päätösvaltansa vähentyneen. Mainostoimialan murroksen kannalta tutkimus tuo esiin uudenlaisen tiimityön ymmärtämisen ja korostaa yksilöiden vahvuuksien tunnistamisen merkitystä. Kiristyvässä taloudessa se suuntaa huomion sekä mainostoimistojen että niiden asiakasyritysten sisäisten ja ulkoisten resurssien tehokkaaseen ja tuottavaan hyödyntämiseen ja organisoimiseen. Sosiologisesti tutkimus tarjoaa yhdenlaisen näkökulman ryhmätyön ulottuvuuksiin ja työelämän yhteistyöhaasteiden pohtimiseen. Siten tutkimuksen tuloksilla voi nähdä arvoa myös muiden kuin mainosalan yhteistyökäytäntöjentarkasteluun.

Model based study of a calcium oxide looping process for post-combustion carbon dioxide capture

Calcium oxide looping is a carbon dioxide sequestration technique that utilizes the partially reversible reaction between limestone and carbon dioxide in two interconnected fluidised beds, carbonator and calciner. Flue gases from a combustor are fed into the carbonator where calcium oxide reacts with carbon dioxide within the gases at a temperature of 650 ºC. Calcium oxide is transformed into calcium carbonate which is circulated into the regenerative calciner, where calcium carbonate is returned into calcium oxide and a stream of pure carbon dioxide at a higher temperature of 950 ºC. Calcium oxide looping has proved to have a low impact on the overall process efficiency and would be easily retrofitted into existing power plants. This master’s thesis is done in participation to an EU funded project CaOling as a part of the Lappeenranta University of Technology deliverable, reactor modelling and scale-up tools. Thesis concentrates in creating the first model frame and finding the physically relevant phenomena governing the process.

Management of interdependency in project portfolio

Project management has evolved in recent decades. Project portfolio management, together with multi project management, is an emerging area in the project management field in practice, and correspondingly in academic research and forums. In multi project management, projects cannot be handled isolated from each other, as they often have interdependencies that have to be taken into account. If the interdependencies between projects are evaluated during the selection process, the success rate of the project portfolio is increased. Interdependencies can be human resources, technological, and/or market based. Despite of the fact that interdependency as a phenomenon has roots in the 1960s and is related to famous management theories, it has not been much studied, although in practice most companies use it to great extent. There exists some research on interdependency, but prior publications have not emphasized the phenomenon per se, because a practical orientation practitioner techniques prevails in the literature. This research applies the method triangulation, electronic surveys and multiple case study. The research concentrates on small to large companies in Estonia and Finland, mainly in construction, engineering, ICT, and machinery industries. The literature review reveals that interdependencies are deeply involved in R&D and innovation. Survey analysis shows that companies are aware of interdependency issues in general, but they i have lack of detailed knowledge to use it thoroughly. Empirical evidence also indicates that interdependency techniques influence the success rate and other efficiency aspects to different extents. There are a lot of similarities in interdependency related managerial issues in companies of varying sizes and countries in Northern Europe. Differences found in the study are for instance the fact that smaller companies face more difficulties in implementing and evaluating interdependency procedures. Country differences between Estonia and Finland stem from working solutions to manage interdependencies on a daily basis.historical and cultural reasons, such as the special features of a transition country compared to a mature country. An overview of the dominant problems, best practices, and commonly used techniques associated with interdependency is provided in the study. Empirical findings show that many interdependency techniques are not used in practice. A multiple case study was performed in the study to find out how interdependencies are managed in real life on a daily basis. The results show that interdependencies are mostly managed in an informal manner. A description of managing the interdependencies and implementation procedures is given. Interdependency procedures are hard to implement, especially in smaller companies. Companies have difficulties in implementing interdependency procedures and evaluating them. The study contains detailed results on how companies have implemented working solutions to manage interdependencies on a daily basis