122 resultados para new technology


Relevância:

60.00% 60.00%

Publicador:

Resumo:

This master’s thesis has examined how Entrepreneurial, Customer and Knowledge Management Orientations are needed in the use of Big data technology by small retail firms in their Customer Knowledge Management. A vision of the ability of small retailers to move to the Big data era is based on empirical evidence of owner-managers’ attitudes and the firms’ processes. Abductive content analysis was used as a research strategy and the qualitative data was collected through theme interviews of owner-managers of 11 small-size retail firms. The biggest obstacles to the use of Big data by small retail firms are: a lack of information about the new technology; a lack of Knowledge Management Orientation; and, a lack of proactive dimension in Entrepreneurial and Customer Orientations. A strong reactive customer-led orientation, and the ability of the owner-manager to system thinking will support Customer Knowledge Management development. The low stage of technology-use is preventing utilization of customer information. Co-operation between firms or with educational organizations may significantly enhance the use of Big data –technology by small retail firms.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Uuden tietojärjestelmän hankinta on paitsi tekninen myös sosiaalinen muutos. Tieteelliset teoriat sekä tutkimukset osoittavat, että uuden tietojärjestelmän onnistunut käyttöönotto edellyttää sosioteknistä systeemiajattelua muutoksen läpivientiin. Tämän tutkimuksen tavoitteena oli osallistua yhteiskunnalliseen keskusteluun muutosjohtamisen tärkeydestä otettaessa käyttöön uutta teknologiaa sekä tutkia Case-yrityksen ERP-projektin muutosjohtamisen onnistumista. Tutkimuksen konteksti koostuu sosioteknisestä muutoksesta, jossa muutosjohtaminen nousee keskiöön. Tutkimuksessa kartoitettiin uuden ERP-järjestelmän käyttöönoton onnistumisen kannalta keskeiset muutosjohtamisen elementit: muutostarve, projektitiimi, visio ja tavoitteet, viestintä, koulutus, osallistaminen, sitouttaminen, johdon ja projektiryhmän tuki sekä muutoksen arviointi ja vakiinnuttaminen. Tutkimuksen empiirisessä osassa arvioitiin Case-yrityksen ERP-projektin muutosjohtamista henkilöstön näkökulmasta. Tutkimus toteutettiin laadullisena tapaustutkimuksena, jossa pääasiallisena aineistonkeruumenetelmänä käytettiin sähköistä puolistrukturoitua kyselylomaketta. Tulosten analysoinnin perusteella Case-yrityksen ERP-järjestelmän käyttöönotto sujui tyydyttävästi.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

This study discusses the formation phase of Chinese-Finnish joint ventures in China. The purpose of this thesis is to create best practices for Finnish software companies in forming a joint venture with a local Chinese company in China. Therefore, the main research question, in what are the best practices for forming Sino-Finnish joint ventures in China for Finnish software firms, is examined through four different themes within the joint venture formation phase; the motives, the partner se- lection, the choice of a joint venture type and joint venture negotiations. The theoretical background of the study consists of literature relating to the establishment process of Sino-Western joint ventures in China. The empirical research conducted for this study is based on the expert interviews. The empirical data was gathered via nine semi-structured interviews with both Chinese and Finnish experts in software and technology industry, who have experience or knowledge in establishing Sino-Finnish joint ventures in China. Thematic analysis was used to cat- egorize and interpret the interview data. In addition, a thematic network was built to act as a basis of the analysis. According to the main findings, the main motives for Finnish software companies to establish a joint venture in China are lack of skills or experience, little resources to enter on their own, and China’s large market. The main motives for Chinese companies are to gain new technology or man- agerial skills, and expand internationally. The intellectual property rights (IPR) have recently im- proved a lot in China, but the Finnish companies’ knowledge on IPR is inadequate. The Finnish software companies should conduct a market and industry research in order to understand their po- sition in the market and to find a suitable location and potential joint venture partners. It is essential to define partner selection criteria and partner attributes. In addition, it is important to build the joint venture around complementary motives and a win-win situation between the joint venture partners. The Finnish companies should be prepared that the joint venture negotiations will be challenging and they will take a long time. The challenges can be overcome by gaining understanding about the Chinese culture and business environment. The findings of this study enhance understanding of the joint venture formation phase in China. This study provides guidelines for Finnish software companies to establish a joint venture in China. In addition, this study brings new insights to the Sino-Western joint venture literature with its soft- ware industry context. Future research is, however, necessary in order to gain an understanding of the advantages and disadvantages of a joint venture as an entry mode into China for Finnish soft- ware companies

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Additive manufacturing, or 3D printing, is globally one of most interesting area in developing of manufacturing technologies. This technology is suitable for fabrication off industrial products and it interests actors in fields of computer sciences, economics, medical sciences and design&arts. Additive manufacturing is often referred as third industrial revolution: first revolution was invention of steam engines in 18th century and second was industrial revolution started by Henry Ford in 1920s. Companies should be able to test suitability of their products for additive manufacturing and 3D printing but also how much better products could be when products are totally re-designed so that all potential of this new technology can be utilized. This is where education has its importance; new generations who enter working life should be educated to know of additive manufacturing and 3D printing, its advantages but also of it limits. There has to be also possibility to educate industry and people already working there, so that industrial implementation could be done successfully. This is especially very valid for Finland. Education is strongly needed so that Finnish industry can maintain its competence in global markets. Role of education is extremely important when a new technology is industrially implemented. Additive manufacturing and 3D printing offers freedom to design new products, production and generally ways of doing things. Development, planning and execution of education for additive manufacturing and 3D printing is challenging as this area develops very fast. New innovations are coming almost every month. Planning of education for additive manufacturing and 3D printing requires collection pieces of data from various of sources. Additive manufacturing and 3D printing industry and its development has to be followed frequently, and material for additive manufacturing and 3D printing has to be renewed frequently.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Digitalisaation myötä myös liikenteestä tulee yhä älykkäämpää. Valtiovalta purkaa sääntelyä ja sallii digitaalisten menetelmien laajempaa käyttöä. Kuljettajakoulutusta pidetään toimialana kuitenkin hyvin konventionaalisena. Diplomityön tarkoituksena on tutkia, mitä digitalisaatio tarkoittaa kuljettajakoulutusyritysten liiketoimintamalleille. Empiiristä aineistoa saatiin teemahaastatteluin ja aineistoa analysoitiin laadullisin menetelmin. Työssä esitellään alan vahvuudet, heikkoudet, mahdollisuudet ja uhat sekä tulevaisuuden skenaariot. Digitalisaatio aiheuttaa merkittäviä muutoksia kuljettajakoulutusalan yrityksille. Auto ei ole enää entisenlainen statussymboli eikä rahan käytön kohde. Digitaaliajan ihmiset eivät aina kaipaa fyysistä liikkumista, kun vielä kivijalkakaupatkin vähenevät. Ajokorttia ei useinkaan koeta välttämättömäksi aikuistumisriitiksi. Uusi teknologia voi kuitenkin radikaalisti parantaa alan yritysten suorituskykyä: palvelut muuttuvat ajasta ja paikasta riippumattomiksi sekä skaalautuviksi. Kuluttajien kannalta digitalisaatio puolestaan parantaa asiakaslähtöisyyttä. Alan liiketoimintamallien kehittymiseen vaikuttaa neljä taustavoimaa: digitalisaatio, perinteet, sääntely ja yrittäjyys. Liiketoimintamalli sisältää opetukselliset ydintoiminnot, sisäiset prosessit, liiketoiminnan tukitoiminnot ja arvoehdotuksen asiakkaalle. Liiketoiminnan kehittäminen vastaamaan digitalisaation vaatimuksia edellyttää proaktiivista innovaatiostrategiaa. Siihen perustuvien innovaatiomenetelmien avulla yritys voi kehittää liiketoimintamalliaan digitalisaation tarjoamien ja tiedon asymmetriasta kumpuavien mahdollisuuksien hyödyntämiseksi.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Additive manufacturing (shortened as AM), or more commonly 3D printing, consists of wide variety of different modern manufacturing technologies. AM is based on direct printing of a digital 3D model to a final product which is fabricated adding material layer by layer. This is from where term additive manufacturing has its origin. It is not only material what is added, but it is also value, properties etc. which are added. AM enables production of different and even better products compared to conventional manufacturing technologies. An estimation of potential of additive manufacturing can be gathered by considering the potential of laser cutting, which is one of the most widely used modern manufacturing technologies. This technique has been used over 40 years, and whole market around this technology is at the moment c. four billion euros and yearly growth is around 10 %. One factor affecting this success of laser cutting is that laser cutting enables radical improvements to products made of flat sheet. AM and 3D printing will do the same for three dimensional parts. Laser devices, which are at the moment used in 3D printing, are globally at the moment only around 1% of all laser devices used in any fabrication technology, so even with a cautious estimate the potential growth of at least 100 % is coming in next few years. Role of education is very important, when this kind of modern technology is industrially implemented. When both generation entering to work life and also generation who has been a while in work life understands new technology, its potential and limitations, this is the point when also product design can be rethought Potential of product design is driving force for wide use of additive manufacturing and 3D printing. Utilization of additive manufacturing and 3D printing is also opportunity for Finland and Finnish industry. This technology can save Finnish manufacturing industry. This technique has stron potential, as Finland has traditionally strong industrial know-how and good ICT knowledge.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Diplomityön tavoitteena oli selvittää, kuinka sähkösuodattimella voidaan vaikuttaa sisäilman laatuun ja kuinka kilpailukykyinen vaihtoehto pienkiinteistöissä sähkösuodatin on perinteisiin kuitusuodattimiin verrattuna. Teoriaosassa tarkasteltiin, kuinka ilman hengitettävät hiukkaset muodostuvat ja miten ne vaikuttavat sisäilman laatuun sekä ihmisten terveyteen. Tarkasteltiin hiukkasten koon, lukumäärän, massan ja pinta-alan yhteyksiä niiden terveysvaikutuksiin. Ultrapienet hiukkaset ovat terveydelle haitallisimpia, koska hiukkasten lukumäärä ja pinta-ala lisäävät terveyshaittoja enemmän kuin hiukkasten massa. Tutkittiin pienkiinteistöjen ilmanvaihtoratkaisuja ja erilaisia tuloilmanpuhdistus-menetelmiä. Soveltavassa osassa tarkasteltiin sähkösuodattimen toimintaa ja sen mahdollisuuksia sisäilman parantajana verrattuna perinteisiin kuitusuodattimiin. Tehtiin sähkösuodattimen ja kuitusuodattimen välinen elinkaarikustannusvertailu keskisuurelle omakotitalolle. Kirjallisuuden ja tutkimushavaintojen perusteella sähkösuodattimen suurin etu muihin suodattimiin verrattuna on sen kyky poistaa kaiken kokoisia, myös ultrapieniä, hengitettäviä hiukkasia ja siten tehokkaasti vähentää hengitettävien hiukkasten lukumäärää ja pinta-alaa. Tällä voi olla vaikutusta yleisten terveyshaittojen ja ympäristöherkkyyden ennaltaehkäisemisessä. Ympäristöherkkyyteen sairastuneiden oireiluun sähkösuodatin voi tuottaa helpotusta kotioloissa ja siirrettävän ilmanpuhdistimen avulla myös työpaikoilla. Elinkaarikustannusvertailun perusteella selvisi, että sähkösuodatin on kalliimmasta hinnastaan huolimatta kokonaiskustannuksiltaan selvästi edullisempi vaihtoehto kuin kuitusuodattimet. Sähkösuodattimen haasteena on uuden teknologian lanseeraaminen pientalorakentamiseen. Pienrakennusten tuloilman puhdistusmenetelmien kehittämisellä olisi mahdollista parantaa suomalaisten elämänlaatua ja saavuttaa merkittäviä säästöjä terveydenhoitokuluissa.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

This study discusses the formation phase of Chinese-Finnish joint ventures in China. The purpose of this thesis is to create best practices for Finnish software companies in forming a joint venture with a local Chinese company in China. Therefore, the main research question, in what are the best practices for forming Sino-Finnish joint ventures in China for Finnish software firms, is examined through four different themes within the joint venture formation phase; the motives, the partner se-lection, the choice of a joint venture type and joint venture negotiations. The theoretical background of the study consists of literature relating to the establishment process of Sino-Western joint ventures in China. The empirical research conducted for this study is based on the expert interviews. The empirical data was gathered via nine semi-structured interviews with both Chinese and Finnish experts in software and technology industry, who have experience or knowledge in establishing Sino-Finnish joint ventures in China. Thematic analysis was used to cat-egorize and interpret the interview data. In addition, a thematic network was built to act as a basis of the analysis. According to the main findings, the main motives for Finnish software companies to establish a joint venture in China are lack of skills or experience, little resources to enter on their own, and China’s large market. The main motives for Chinese companies are to gain new technology or man-agerial skills, and expand internationally. The intellectual property rights (IPR) have recently im-proved a lot in China, but the Finnish companies’ knowledge on IPR is inadequate. The Finnish software companies should conduct a market and industry research in order to understand their po-sition in the market and to find a suitable location and potential joint venture partners. It is essential to define partner selection criteria and partner attributes. In addition, it is important to build the joint venture around complementary motives and a win-win situation between the joint venture partners. The Finnish companies should be prepared that the joint venture negotiations will be challenging and they will take a long time. The challenges can be overcome by gaining understanding about the Chinese culture and business environment. The findings of this study enhance understanding of the joint venture formation phase in China. This study provides guidelines for Finnish software companies to establish a joint venture in China. In addition, this study brings new insights to the Sino-Western joint venture literature with its soft-ware industry context. Future research is, however, necessary in order to gain an understanding of the advantages and disadvantages of a joint venture as an entry mode into China for Finnish soft-ware companies.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Sales configurators are essential tools for companies that offer complicated case specifically crafted products for customers. Most sophisticated of them are able to design an entire end product on the fly according to given constraints, calculate price for the offer and move the order into production. This thesis covers a sales configurator acquisition project in a large industrial company that offers cranes for its customers. The study spans the preliminary stages of a large-scale software purchase project starting from the specification of problem domain and ending up presenting the most viable software solution that fulfils the requirements for the new system. The project consists of mapping usage environment, use cases, and collecting requirements that are expected from the new system. The collected requirements involve fitting the new sales system into enterprise application infrastructure, mitigating the risks involved in the project and specifying new features to the application whilst preserving all of the admired features of the old sales system currently used in the company. The collected requirements were presented to a number of different sales software vendors who were asked to provide solution suggestions that would fulfil all the demands. All of the received solution proposals were exposed to an evaluation to determine the most feasible solutions, and the construction of evaluation criteria itself was a part of the study. The final outcome of this study is a short-list of the most feasible sales configurator solutions together with a description of how software purchase process in large enterprises work, and which aspects should be paid attention in large projects of similar kind.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Tutkielman aiheena on EU:n kilpailuoikeudellinen lähestymistapa challenge-lausekkeisiin teknologinsiirtosopimuksia koskevassa ryhmäpoikkeusasetuksessa. Teknologian lisensoinnin katsotaan olevan tärkeä väline teknologian kehityksen levittämisessä ja innovaation edistämisessä. Joissakin tapauksissa lisenssisopimus voi sisältää kilpailua rajoittavia lausekkeita, joiden voidaan kuitenkin nähdä hyödyttävän kilpailua kokonaisuutta arvostellen. Tällaisia lausekkeita ovat niin sanotut ”no-challenge” – lauseke, eli sopimusehto, jonka nojalla lisenssinsaaja sitoutuu olemaan haastamatta lisensoidun immateriaalioikeuden pätevyyttä ja ”termination-on-challenge” – lauseke, joka antaa lisensoijalle haastettaessa oikeuden päättää lisenssisopimus. Tutkielmassa perehdytään challenge -lausekkeiden hyväksyttävyyden arviointiin Euroopan unionin kilpailuoikeuden näkökulmasta uuden 1.5.2014 voimaan tulleen ryhmäpoikkeusasetuksen valossa. Muissa kuin yksinoikeuksia luovissa teknologiansiirtosopimuksissa olevat termination-on-challenge – lausekkeita tulee uusimmassa ryhmäpoikkeusetuksessa aina perustua yritysten itse suorittamaan tapauskohtaiseen arviointiin. No-challenge – lausekkeet ovat jatkossakin aiemman käytännön mukaisesti ryhmäpoikkeuksen soveltamisalan ulkopuolella. Komission on perustellut challenge - lausekkeiden jättämistä asetuksen ulkopuolelle julkisella intressillä, joka on päästä eroon mitättömistä immateriaalioikeuksista. Komission on katsonut, että challenge – lausekkeiden kilpailua rajoittava ominaisuus on mitättömien immateriaalioikeuksien esiintyminen markkinoilla, mikä osaltaan vääristää kilpailua ja hidastaa toimijoiden markkinoille pääsyä. Toisaalta lausekkeiden voidaan sanoa edistävän kilpailua, sillä ne usein tarjoavat immateriaalioikeuden haltijalle riittävän oikeussuojan ja kannustimen lisensoida teknologia, mikä lisää kilpailua, keksijöiden kannustimia panostaa innovaatioihin sekä vähentää transaktiokustannuksia. Tutkielman keskeinen tulos on ennen kaikkea challenge-lausekkeiden kilpailuvaikutusten tunnistamisessa ja komission perusteluiden kriittisessä arvioinnissa. Komission linjauksen perustelut eivät saa riittävää tukea ottaen huomioon vaikutustenarvioinnin, EU:n tuomioistuinkäytännön sekä taloustieteellisen lähestymistavan. Tutkielman tulosten pohjalta ja tukeutuen eri oikeuslähteisiin, taloustieteellisiin argumentteihin ja oikeusvertailevaan tutkimukseen, on mahdollista tehdä johtopäätöksiä niistä seikoista ja argumenteista, joilla on merkitystä uuden politiikkalinjauksen kilpailuvaikutuksiin.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This project focuses on studying and testing the benefits of the NX Remote Desktop technology in administrative use for Finnish Meteorological Institutes existing Linux Terminal Service Project environment. This was done due to the criticality of the system caused by growing number of users as the Linux Terminal Service Project system expands. Although many of the supporting tasks can be done via Secure Shell connection, testing graphical programs or desktop behaviour in such a way is impossible. At first basic technologies behind the NX Remote Desktop were studied, and after that started the testing of two possible programs, FreeNX and NoMachine NX server. Testing the functionality and bandwidth demands were first done in a closed local area network, and results were studied. The better candidate was then installed in a virtual server simulating actual Linux Terminal Service Project server at Finnish Meteorological Institute and connection from Internet was tested to see was there any problems with firewalls and security policies. The results are reported in this study. Studying and testing the two different candidates of NX Remote Desktop showed, that NoMachine NX Server provides better customer support and documentation. Security aspects of the Finnish Meteorological Institute had also to be considered, and since updates along with the new developing tools are announced in next version of the program, this version was the choice. Studies also show that even NoMachine promises a swift connection over an average of 20Kbit/s bandwidth, at least double of that is needed. This project gives an overview of available remote desktop products along their benefits. NX Remote Desktop technology is studied, and installation instructions are included. Testing is done in both, closed and the actual environment and problems and suggestions are studied and analyzed. The installation to the actual LTSP server is not yet made, but a virtual server is put up in the same place in the view of network topology. This ensures, that if the administrators are satisfied with the system, installation and setting up the system will go as described in this report.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Lappeenrannan teknillisen korkeakoulun sähkötekniikan osasto muutti 1.8.2005 sähkötekniikan tutkinnon kaksiportaiseksi ja vastaamaan näin Bologna-prosessia ja Suomen yliopistolainsäädäntöä. Tutkinnonuudistuksen myötä osasto haluaa varmistaa sähkötekniikan tutkintojen laadun ja vertailtavuuden sekä parantaa opiskelijoidensekä henkilökunnan liikkuvuutta. Tutkintojen laatu ja vertailtavuus osoitetaan sähkötekniikan osaston benchmark-projektilla, jossa kerätään tietoja maisteri- ja tohtorintutkintoa tarjoavista eurooppalaisista yliopistoista. Diplomityö käsittää BM-projektin kolmannen vaiheen suunnittelun ja toteutuksen sisältäen teoriaa benchmark-projekteille tyypillisistä toimintatavoista. Hyväksi havaitut menetelmiä, kuten kyselyt ja matriisit, on tässä työssä otettu soveltuvin osin sähkötekniikan osaston BM-projektin työkaluiksi. Diplomityössä analysoidaan työkalujen avulla BM-kumppaneilta kerättyjä tietoja sekä esitetään ratkaisuja, miten sähkötekniikan osastolla voidaan jatkaa parhaiden toimintatapojen löytämistä.