Kuulla vai kuunnella – käyttäjää osallistavan palveluinnovoinnin lähestymistavan toteuttamisen haasteita julkisella sektorilla

Julkisen sektorin itsensä synnyttämien innovaatioiden ja innovoinnin näkökulma on verrattain tuore innovaatiotutkimuksen tutkimuskohde. Vielä uudempaa lähestymistapaa edustaa käyttäjälähtöinen ja käyttäjää osallistava palveluinnovaatiotutkimus julkisella sektorilla. Käyttäjälähtöisen ja käyttäjää osallistavan palveluinnovoinnin lähestymistavan toteuttamisesta ollaan kiinnostuneita, mutta tieteelliseen tutkimukseen perustuva tieto lähestymistavasta on vielä kohtuullisen niukkaa. Tämän käyttäjälähtöiseen palvelujen innovointiin keskittyvän väitöskirjatutkimuksen päätavoitteena on mikrotasolla tunnistaa ja ryhmitellä käyttäjää osallistavan palveluinnovoinnin lähestymistavan toteuttamisen haasteita julkisella sektorilla. Väitöskirjatutkimuksen alatavoitteena on tutkimuksesta saatavan tiedon avulla muodostaa kysymyslista tukemaan lähestymistavan käyttöönottamista ja toteuttamista julkisen sektorin palveluorganisaatioissa ja -verkostoissa. Julkisen palvelusektorin ohella väitöskirjan tutkimustuloksia voivat soveltuvin osin hyödyntää myös yksityisen ja kolmannen sektorin palveluorganisaatiot ja -verkostot sekä käyttäjälähtöisen innovaatiopolitiikan suunnitteluun ja sen jalkauttamiseen osallistuvat tahot. Haasteita lähestytään tutkimuksessa käyttäjälähtöisen ja käyttäjää osallistavan palveluinnovoinnin lähestymistavan piirteiden kautta ja haasteita tarkastellaan kehittäjäviranomaisten (ryhmätaso) näkökulmasta. Kuntasektori on valittu tutkimukseen edustamaan julkista sektoria. Lähestymistavan piirteiksi tutkimuksessa määritellään käyttäjänäkökulman ohjaava rooli organisaation innovaatiotoiminnan strategisella tasolla ja palvelujen uudistamisprosessien tasoilla, avoimuus (erityisesti käyttäjärajapinta) ja tulkinnallisuus innovaatioprosessien varhaisessa vaiheessa sekä laaja-alainen käsitys innovaatioiden lähteistä käyttäjänäkökulmaa muodostettaessa. Tutkimuksen kohteena on hyvinvointipalveluinnovaatioprosessien varhainen vaihe, jolloin keskeisessä asemassa on uusien ideoiden sekä uuden tiedon ja ymmärryksen hankinta hyödynnettäväksi innovaatioprosessien seuraavissa vaiheissa. Tutkimuksessa rajaudutaan käyttäjälähtöisen palveluinnovoinnin muotoon, jossa käyttäjät intentionaalisesti ja konkreettisesti osallistetaan kehittäjäviranomaisjohtoisiin palveluinnovaatioprosesseihin. Käyttäjiksi tutkimuksessa ymmärretään palvelun loppukäyttäjät palvelujen ”ulkoisina hyödyntäjinä” ja yli sektorialisten palveluprosessien henkilöstö palvelujen ”sisäisinä hyödyntäjinä”. Hyvinvointipalveluista tutkimuksessa ovat edustettuina sosiaali- ja terveyspalvelut sekä ikäihmisten palvelukeskusten tarjoamat palvelut. Kuntasektorin innovaatiotoiminnan kenttä ymmärretään tutkimuksessa verkostomaisena kokonaisuutena, joka ylittää kuntien hallinnolliset rajat. Artikkeliväitöskirjana toteutetun väitöskirjatutkimuksen metodologia perustuu usean tapauksen tapaustutkimukseen (multiple case-studies) ja kvalitatiiviseen tutkimusotteeseen. Työn empiirinen osuus koostuu viidestä artikkelina julkaistusta osatutkimuksesta. Osatutkimuksissa käytetään tapaustutkimuksen eri variaatioita, ja tutkimusaineistot on kerätty kolmesta eri perustutkimusympäristöstä. Osatutkimuksien tapaukset on valittu palvelun käyttäjien ”äänen jatkumon” (the voice of the customer) eri kohdista. Käyttäjän ääntä käytetään tutkimuksessa metodisena ratkaisuna ja metaforana. Lisäksi käyttäjän ääni ymmärretään tutkimuksessa paremminkin kollektiivisena ja laajemmista palvelujen kehittämisnäkökulmista kertovana tekijänä kuin yksittäisten palvelun käyttäjien tarpeista ja toiveista kertovana metaforana. Käyttäjää osallistavan palveluinnovoinnin lähestymistavan toteuttamisen haasteiksi julkisella sektorilla tutkimuksessa tunnistetaan viisi haastetta. Tiivistetysti haasteena on 1. palvelujen käyttäjien subjektiuteen perustuva käyttäjälähtöisyys palvelujen uudistamisessa 2. tunnistaa palvelun käyttäjät innovaatiotoiminnan voimavarana ja rohkaistua heidän osallistamiseensa 3. sitoutuminen yhteistoiminnallisuuteen käyttäjä- ja muita rajapintoja ylittävissä palvelujen uudistamisprosesseissa ja innovaatiohakuisuus työskentelyssä 4. oivaltaa palvelutoivelistoja ja asiakaspalautteita laajempia kehittämisnäkökulmia 5. synnyttää luottamukseen perustuva hyvä kierre palvelun käyttäjien ja kehittäjien välille. Tutkimustuloksena syntyneet haasteet paikannetaan tutkimuksessa käyttäjän äänen jatkumolle erilaisin painotuksin. Lisäksi tutkimustulosten pohjalta tehdään kolme keskeistä johtopäätöstä. Ensinnäkin palvelun kehittäjätahon sekä palvelun loppukäyttäjien ja palvelujen sisäisten hyödyntäjien väliltä on tunnistettavissa innovaatiopotentiaalia sisältäviä rakenteellisia aukkoja. Toiseksi kehittäjäviranomaistahon valmius ja halu laajentaa tiedonmuodostustaan palvelujen uudistamisessa palvelun käyttäjien kanssa yhteisöllisen tiedonmuodostuksen suuntaan on puutteellinen. Kolmanneksi palvelujen kehittäjätaho ei ole sisäistänyt riittävässä määrin käyttäjää osallistavan palveluinnovoinnin lähestymistavan metodologisia perusajatuksia. Tutkimuksessa tunnistetut viisi haastetta osoittavat, että käyttäjää osallistavan palveluinnovoinnin lähestymistavan käyttöönotto hyvinvointipalveluorganisaation tai -verkoston palvelujen innovoinnin lähestymistavaksi ei ole mekaaninen toimenpide. Lähestymistavan käyttöönottoa tukeva kysymyslista perustuu tutkimuksessa tunnistettuihin haasteisiin. Kysymyslista on laadittu siten, että kysymykset liittyvät laajasti julkisten palveluorganisaatioiden ja -verkostojen innovaatiokulttuuriin. Kaksiosaisen kysymyslistan ensimmäisen osan kysymykset käsittelevät innovointia ohjaavia mentaalisia malleja. Ensimmäisessä osassa esitetään esimerkiksi seuraava kysymys: ”Millaista käsitystäpalvelun käyttäjistä (kuntalaisista) sekä käyttäjien ja kehittäjien (viranomaisten) välisestä suhteesta ilmennämme palvelujen innovoinnissa; onko palvelujen käyttäjä (kuntalainen) kohde, jolle kehitetään palveluja, vai onko hän jopa välttämätön kehittämiskumppani?”. Kysymyslistan toisen osan kysymykset liittyvät innovaatiokäytänteisiin ja valmiuksiin. Esimerkkinä voidaan mainita seuraava kaksiosainen kysymys: ”Tukevatko innovaatiokäytänteemme käyttäjärajapinnan ylittäviä innovaatioprosesseja ja sitoudummeko avoimin mielin työskentelyyn palvelun käyttäjien, potentiaalisten käyttäjien tai ei-käyttäjien kanssa? Mitä hyötyjä koemme yhteistoiminnallisuudesta koituvan meille ja käyttäjille sekä innovaation laatuominaisuuksiin?”. Mitä tulee tutkimuksen otsikon alkuosaan ”kuulla vai kuunnella”, vastaus on, että pääpaino on sanalla ”kuulla”. Pohdintaluvussa tuodaan myös esille tarve – tai ainakin kriittisen tarkastelun tarve – käyttäjälähtöisen ja käyttäjää osallistavan palveluinnovoinnin käsitteen ja sen luonteen sekä tavoitteiden määrittelemiselle julkisen sektorin ominaispiirteistä käsin vastapainona alkuperältään yksityisen sektorin liiketoimintakontekstista lähtöisin oleville määrittelyille.

Rajankäyntiä museoissa

Re-Visiting the Contact Zone: Museums, Theory, Practice Lindköpingissä, Ruotsissa 17.-21.7.2011. Dissolving boundaries. Museological approaches to national, social and cultural issues Bad Staffelsteinissa Saksassa 2.-5.10.2011.

Process approach in quality management - Case: ECO process development in EMS industry

The aim of the thesis was to study quality management with process approach and to find out how to utilize process management to improve quality. The operating environment of organizations has changed. Organizations are focusing on their core competences and networking with suppliers and customers to ensure more effective and efficient value creation for the end customer. Quality management is moving from inspection of the output to prevention of problems from occurring in the first place and management thinking is changing from functional approach to process approach. In the theoretical part of the thesis, it is studied how to define quality, how to achieve good quality, how to improve quality, and how to make sure the improvement goes on as never ending cycle. A selection of quality tools is introduced. Process approach to quality management is described and compared to functional approach, which is the traditional way to manage operations and quality. The customer focus is also studied, and it is presented, that to ensure long term customer commitment, organization needs to react to changing customer requirements and wishes by constantly improving the processes. In the experimental part the theories are tested in a process improvement business case. It is shown how to execute a process improvement project starting from defining the customer requirements, continuing to defining the process ownership, roles and responsibilities, boundaries, interfaces and the actual process activities. The control points and measures are determined for the process, as well as the feedback and corrective action process, to ensure continual improvement can be achieved and to enable verification that customer requirements are fulfilled.

Creating possibilities for collective creativity : Brokerage Functions in Practice-Based Innovation

In the network era, creative achievements like innovations are more and more often created in interaction among different actors. The complexity of today‘s problems transcends the individual human mind, requiring not only individual but also collective creativity. In collective creativity, it is impossible to trace the source of new ideas to an individual. Instead, creative activity emerges from the collaboration and contribution of many individuals, thereby blurring the contribution of specific individuals in creating ideas. Collective creativity is often associated with diversity of knowledge, skills, experiences and perspectives. Collaboration between diverse actors thus triggers creativity and gives possibilities for collective creativity. This dissertation investigates collective creativity in the context of practice-based innovation. Practice-based innovation processes are triggered by problem setting in a practical context and conducted in non-linear processes utilising scientific and practical knowledge production and creation in cross-disciplinary innovation networks. In these networks diversity or distances between innovation actors are essential. Innovation potential may be found in exploiting different kinds of distances. This dissertation presents different kinds of distances, such as cognitive, functional and organisational which could be considered as sources of creativity and thus innovation. However, formation and functioning of these kinds of innovation networks can be problematic. Distances between innovating actors may be so great that a special interpretation function is needed – that is, brokerage. This dissertation defines factors that enhance collective creativity in practice-based innovation and especially in the fuzzy front end phase of innovation processes. The first objective of this dissertation is to study individual and collective creativity at the employee level and identify those factors that support individual and collective creativity in the organisation. The second objective is to study how organisations use external knowledge to support collective creativity in their innovation processes in open multi-actor innovation. The third objective is to define how brokerage functions create possibilities for collective creativity especially in the context of practice-based innovation. The research objectives have been studied through five substudies using a case-study strategy. Each substudy highlights various aspects of creativity and collective creativity. The empirical data consist of materials from innovation projects arranged in the Lahti region, Finland, or materials from the development of innovation methods in the Lahti region. The Lahti region has been chosen as the research context because the innovation policy of the region emphasises especially the promotion of practice-based innovations. The results of this dissertation indicate that all possibilities of collective creativity are not utilised in internal operations of organisations. The dissertation introduces several factors that could support collective creativity in organisations. However, creativity as a social construct is understood and experienced differently in different organisations, and these differences should be taken into account when supporting creativity in organisations. The increasing complexity of most potential innovations requires collaborative creative efforts that often exceed the boundaries of the organisation and call for the involvement of external expertise. In practice-based innovation different distances are considered as sources of creativity. This dissertation gives practical implications on how it is possible to exploit different kinds of distances knowingly. It underlines especially the importance of brokerage functions in open, practice-based innovation in order to create possibilities for collective creativity. As a contribution of this dissertation, a model of brokerage functions in practice-based innovation is formulated. According to the model, the results and success of brokerage functions are based on the context of brokerage as well as the roles, tasks, skills and capabilities of brokers. The brokerage functions in practice-based innovation are also possible to divide into social and cognitive brokerage.

Mistä on uudistumiskykyinen organisaatiokulttuuri tehty, case: Kouvolan kaupunki

Tutkimuksen tarkoituksena on selvittää organisaatiokulttuurin merkitystä organisaation uudistumiskykyyn. Lisäksi selvitetään, mitkä uudistumiskykyä tukevat tai estävät organisaatiokulttuurin piirteet toteutuvat Kouvolan kaupungin aikuissosiaalipalveluissa. Tutkimus toteutetaan laadullisena tapaustutkimuksena huomioiden organisaatiossa vuonna 2010 tehty organisaation uudistumiskyvyn kyselytutkimus. Aineistonkeruumenetelmänä käytetään puolistrukturoituja yksilöhaastatteluita, joissa haastateltavina ovat organisaation harkinnanvaraisesti valitsemat haastateltavat. Aineiston kerääminen ja analysointi toteutetaan teorialähtöisesti. Kohdeorganisaation vahvuudeksi voidaan nähdä hyvin tunnistettu strategia sekä siihen liittyvät päämäärät ja arvot, mikä antaa organisaatiolle mahdollisuuden toteuttaa strategian mahdollistamia organisaatiokulttuurin uudistumista edistäviä piirteitä. Vahvuutena voidaan pitää myös asiakaslähtöisyyden sisäistämistä toimintaa ohjaavana arvona sekä vahvaa sitoutumista omaan työhön. Organisaatiokulttuuria pidetään vielä hahmottumattomana, mikä vaatii sekä kulttuurin että identiteetin vahvistamista. Uudistumiskykyä tukeva organisaatiokulttuuri näkyy hyvänä ja avoimena yhteistyönä ja vuorovaikutuksena sekä organisaation sisällä että yhteistyökumppanien kanssa. Kehittämiskohteeksi Kouvolassa nouseekin yhteistyön parantaminen ja tehostaminen ylittämällä palvelualue- ja toimialarajoja sekä pyrkimällä poliittisen ja virkamiesjohdon entistä yhtenäisempään näkemykseen toimintaa tukevista innovatiivisista ratkaisuista. Kannustamisen ja palkitsemisen kohdistamisella uudistumista edistävään toimintaan voidaan saada aikaan uskallusta ja halua ideoida sekä innovoida.

Haja-asutusalueiden pienjätevedenpuhdistamoiden online-monitoroinnin kehitysmahdollisuudet

The aim of this Bachelor's thesis was to investigate potentialities of online-monitoring the efficiency of small scale wastewater treatment systems. Evolving legislation currently sets minimum boundaries of relative decrease in levels of phosphorus, nitrogen and BOD in abovementioned applications, yet no monitoring requirements for such systems are determined. Inherently, no applicable monitoring system for these parameters exist. However, some measuring methods offer potentialities for estimating the reduction of these certain parameters in a wastewater stream treated in a small scale system. Such methods could be found for example among electronic noses, measuring of electronic conductivity or turbidity.

Strategic outsourcing of R&D: The location-specific advantages of India to the pharmaceutical industry

Companies are increasingly under pressure to be more efficient both in terms of costs and overall performance and thus, they seek new ways to develop their products and innovate. For pharmaceutical industry it can take several decades to launch a new drug to the markets. Since pharmaceutical industry is one of the most research-intensive industries, is outsourcing one way to enhance the R&D processes of such companies. It is said that outsourcing to offshore locations is vastly more challenging and complicated than any other exporting activity or inter-company relationship that has evoked a lot of discussion. By outsourcing strategically, companies must also thoroughly focus on transaction costs and core competences. Today, the suppliers are looked for beyond national boundaries and furthermore, the location of the outsourcing activity must also be thoroughly considered. Consequently, the purpose of this study is to analyze what is known of strategic outsourcing of pharmaceutical R&D to India. In order to meet the purpose of the study, this study tries to answer three sub-questions set to it: first, what is strategic outsourcing, second, why pharmaceutical companies utilize strategic outsourcing of R&D and last, why pharmaceutical companies select India as the location for outsourcing their R&D. The study is a qualitative study. The purpose of the study was approached by a literature review with systematic elements and sub-questions were analyzed through different relevant theories, such as theory of transaction costs, core competences and location advantages. Applicable academic journal articles were comprehensively included in the study. The data was collected from electronic journal article databases using key words and almost only peer-reviewed, as new as possible articles were included. Also both the reference list of the included articles and article recommendations from professionals generated more articles for inclusion. The data was analyzed through thematization that resulted in themes that illuminate the purpose of the study and sub-questions. As an outcome of the analysis, each of the theory chapters in the study represents one sub-question. The literature used in this study revealed that strategic outsourcing of R&D is increasingly used in pharmaceutical industry and the major motives to practice it has to do with lowering costs, accessing skilled labor, resources and knowledge and enhancing their quality while speeding up the introduction of new drugs. Mainly for the above-mentioned motives India is frequently chosen as the target location for pharma outsourcers. Still, the literature is somewhat incomplete in this complex phenomenon and more research is needed.

Intra-organizational knowledge transfer in a Finnish multinational company

The ability of a multinational company to effectively transfer knowledge from one unit to another can create a great source of competitive advantage and is crucial for long-term success. However, in their attempts to disseminate existent knowledge across national boundaries, organizations encounter several obstacles. Especially challenging is the transfer of tacit knowledge, the most valuable kind, as it is embedded in the minds and the behavior of people. The purpose of this study is to identify the main factors and challenges to be considered in intra-organizational knowledge transfer and consequently develop a framework that could be utilized to improve the process. The research is of qualitative nature and it adopts an exploratory approach. The study was further conducted as an intensive single-case study through studying a Finnish multinational company, and the researcher adopted a role as a participant observant in the research setting. Other data collection methods include semi-structured interviews and an online survey. The research findings show that knowledge transfer is currently challenging within the international sales organization of the case company. The majority of knowledge is currently concentrated in the company headquarters, and it is not always systematically distributed to the regional offices abroad. The main factor affecting knowledge transfer seems to be the organizational culture, which does not support or encourage knowledge sharing. The company is struggling in having a common place for information and employees that lack proper social networks have difficulties accessing relevant knowledge. Some recommended improvement suggestions include the institutionalization of knowledge transfer by turning it into an articulated organizational goal, and the implementation of a reward system that includes soft factors, such as teamwork and knowledge sharing behavior. Furthermore, the organizational culture should be more open and supportive in order to reinforce trust. Individuals in regional offices should be given better support by offering them dedicated mentors and increasing the amount of expatriation. Finally, knowledge should actively be codified and stored in commonly shared platforms where it is easily accessible by all employees.

Power cycling lifetime estimation of IGBT power modules based on chip temperature modeling

In this doctoral thesis, methods to estimate the expected power cycling life of power semiconductor modules based on chip temperature modeling are developed. Frequency converters operate under dynamic loads in most electric drives. The varying loads cause thermal expansion and contraction, which stresses the internal boundaries between the material layers in the power module. Eventually, the stress wears out the semiconductor modules. The wear-out cannot be detected by traditional temperature or current measurements inside the frequency converter. Therefore, it is important to develop a method to predict the end of the converter lifetime. The thesis concentrates on power-cycling-related failures of insulated gate bipolar transistors. Two types of power modules are discussed: a direct bonded copper (DBC) sandwich structure with and without a baseplate. Most common failure mechanisms are reviewed, and methods to improve the power cycling lifetime of the power modules are presented. Power cycling curves are determined for a module with a lead-free solder by accelerated power cycling tests. A lifetime model is selected and the parameters are updated based on the power cycling test results. According to the measurements, the factor of improvement in the power cycling lifetime of modern IGBT power modules is greater than 10 during the last decade. Also, it is noticed that a 10 C increase in the chip temperature cycle amplitude decreases the lifetime by 40%. A thermal model for the chip temperature estimation is developed. The model is based on power loss estimation of the chip from the output current of the frequency converter. The model is verified with a purpose-built test equipment, which allows simultaneous measurement and simulation of the chip temperature with an arbitrary load waveform. The measurement system is shown to be convenient for studying the thermal behavior of the chip. It is found that the thermal model has a 5 C accuracy in the temperature estimation. The temperature cycles that the power semiconductor chip has experienced are counted by the rainflow algorithm. The counted cycles are compared with the experimentally verified power cycling curves to estimate the life consumption based on the mission profile of the drive. The methods are validated by the lifetime estimation of a power module in a direct-driven wind turbine. The estimated lifetime of the IGBT power module in a direct-driven wind turbine is 15 000 years, if the turbine is located in south-eastern Finland.

On Innovative Search: the use of internal and external sources of innovation among Finnish innovators

This dissertation explores the use of internal and external sources of knowledge in modern innovation processes. It builds on a framework that combines theories such as a behavioural theory of the firm, the evolutionary theory of economic change, and modern approaches to strategic management. It follows the recent increase in innovation research focusing on the firm-level examination of innovative activities instead of traditional industry-level determinants. The innovation process is seen as a problem- and slack- driven search process, which can take several directions in terms of organizational boundaries in the pursuit of new knowledge and other resources. It thus draws on recent models of technological change, according to which firms nowadays should build their innovative activities on both internal and external sources of innovation rather than relying solely on internal resources. Four different research questions are addressed, all of which are empirically investigated via a rich dataset covering Finnish innovators collected by Statistics Finland. Firstly, the study examines how the nature of problems shapes the direction of any search for new knowledge. In general it demonstrates that the nature of the problem does affect the direction of the search, although under resource constraints firms tend to use external rather than internal sources of knowledge. At the same time, it shows that those firms that are constrained in terms of finance seem to search both internally and externally. Secondly, the dissertation investigates the relationships between different kinds of internal and external sources of knowledge in an attempt to find out where firms should direct their search in order to exploit the potential of a distributed innovation process. The concept of complementarities is applied in this context. The third research question concerns how the use of external knowledge sources – openness to external knowledge – influences the financial performance of firms. Given the many advantages of openness presented in the current literature, the focus is on how it shapes profitability. The results reveal a curvilinear relationship between profitability and openness (taking an inverted U-shape), the implication being that it pays to be open up to a certain point, but being too open to external sources may be detrimental to financial performance. Finally, the dissertation addresses some challenges in CISbased innovation research that have received relatively little attention in prior studies. The general aim is to underline the fact that comprehensive understanding of the complex process of technological change requires the constant development of methodological approaches (in terms of data and measures, for example). All the empirical analyses included in the dissertation are based on the Finnish CIS (Finnish Innovation Survey 1998-2000).

Surface transformation hardening of carbon steel with high power fiber laser

This study investigated the surface hardening of steels via experimental tests using a multi-kilowatt fiber laser as the laser source. The influence of laser power and laser power density on the hardening effect was investigated. The microhardness analysis of various laser hardened steels was done. A thermodynamic model was developed to evaluate the thermal process of the surface treatment of a wide thin steel plate with a Gaussian laser beam. The effect of laser linear oscillation hardening (LLOS) of steel was examined. An as-rolled ferritic-pearlitic steel and a tempered martensitic steel with 0.37 wt% C content were hardened under various laser power levels and laser power densities. The optimum power density that produced the maximum hardness was found to be dependent on the laser power. The effect of laser power density on the produced hardness was revealed. The surface hardness, hardened depth and required laser power density were compared between the samples. Fiber laser was briefly compared with high power diode laser in hardening medium-carbon steel. Microhardness (HV0.01) test was done on seven different laser hardened steels, including rolled steel, quenched and tempered steel, soft annealed alloyed steel and conventionally through-hardened steel consisting of different carbon and alloy contents. The surface hardness and hardened depth were compared among the samples. The effect of grain size on surface hardness of ferritic-pearlitic steel and pearlitic-cementite steel was evaluated. In-grain indentation was done to measure the hardness of pearlitic and cementite structures. The macrohardness of the base material was found to be related to the microhardness of the softer phase structure. The measured microhardness values were compared with the conventional macrohardness (HV5) results. A thermodynamic model was developed to calculate the temperature cycle, Ac1 and Ac3 boundaries, homogenization time and cooling rate. The equations were numerically solved with an error of less than 10-8. The temperature distributions for various thicknesses were compared under different laser traverse speed. The lag of the was verified by experiments done on six different steels. The calculated thermal cycle and hardened depth were compared with measured data. Correction coefficients were applied to the model for AISI 4340 steel. AISI 4340 steel was hardened by laser linear oscillation hardening (LLOS). Equations were derived to calculate the overlapped width of adjacent tracks and the number of overlapped scans in the center of the scanned track. The effect of oscillation frequency on the hardened depth was investigated by microscopic evaluation and hardness measurement. The homogeneity of hardness and hardened depth with different processing parameters were investigated. The hardness profiles were compared with the results obtained with conventional single-track hardening. LLOS was proved to be well suitable for surface hardening in a relatively large rectangular area with considerable depth of hardening. Compared with conventional single-track scanning, LLOS produced notably smaller hardened depths while at 40 and 100 Hz LLOS resulted in higher hardness within a depth of about 0.6 mm.

DEVELOPING A CROWDSOURCED VIDEOGRAPHIC RESEARCH METHOD FOR CONSUMER CULTURE RESEARCH

The purpose of this study is to develop a crowdsourced videographic research method for consumer culture research. Videography provides opportunities for expressing contextual and culturally embedded relations. Thus, developing new ways to conduct videographic research is meaningful. This study develops the crowdsourced videographic method based on a literature review and evaluation of a focal study. The literature review follows a qualitative systematic review process. Through the literature review, based on different methodological, crowdsourcing and consumer research related literature, this study defines the method, its application process and evaluation criteria. Furthermore, the evaluation of the focal study, where the method was applied, completes the study. This study applies professional review with self-evaluation as a form of evaluation, drawing from secondary data including research task description, screenshots of the mobile application used in the focal study, videos collected from the participants, and self-evaluation by the author. The focal study is analyzed according to its suitability to consumer culture research, research process and quality. Definitions and descriptions of the research method, its process and quality criteria form the theoretical contribution of this study. Evaluating the focal study using these definitions underlines some best practices of this type of research, generating the practical contribution of this study. Finally, this study provides ideas for future research. First, defining the boundaries of the use of crowdsourcing in various parts of conducting research. Second, improving the method by applying it to new research contexts. Third, testing how changes in one dimension of the crowdsourcing models interact with other dimension. Fourth, comparing the quality criteria applied in this study to various other quality criteria to improve the method’s usefulness. Overall, this study represents a starting point for further development of the crowdsourced videographic research method.

Hyperbolic type metrics and distortion of quasiconformal map pings

This Ph.D. thesis consists of four original papers. The papers cover several topics from geometric function theory, more specifically, hyperbolic type metrics, conformal invariants, and the distortion properties of quasiconformal mappings. The first paper deals mostly with the quasihyperbolic metric. The main result gives the optimal bilipschitz constant with respect to the quasihyperbolic metric for the M¨obius self-mappings of the unit ball. A quasiinvariance property, sharp in a local sense, of the quasihyperbolic metric under quasiconformal mappings is also proved. The second paper studies some distortion estimates for the class of quasiconformal self-mappings fixing the boundary values of the unit ball or convex domains. The distortion is measured by the hyperbolic metric or hyperbolic type metrics. The results provide explicit, asymptotically sharp inequalities when the maximal dilatation of quasiconformal mappings tends to 1. These explicit estimates involve special functions which have a crucial role in this study. In the third paper, we investigate the notion of the quasihyperbolic volume and find the growth estimates for the quasihyperbolic volume of balls in a domain in terms of the radius. It turns out that in the case of domains with Ahlfors regular boundaries, the rate of growth depends not merely on the radius but also on the metric structure of the boundary. The topic of the fourth paper is complete elliptic integrals and inequalities. We derive some functional inequalities and elementary estimates for these special functions. As applications, some functional inequalities and the growth of the exterior modulus of a rectangle are studied.

Automated Purchase to Pay Process Value Modeling and Comparative Process Speeds

The importance of efficient supply chain management has increased due to globalization and the blurring of organizational boundaries. Various supply chain management technologies have been identified to drive organizational profitability and financial performance. Organizations have historically been concentrating heavily on the flow of goods and services, while less attention has been dedicated to the flow of money. While supply chains are becoming more transparent and automated, new opportunities for financial supply chain management have emerged through information technology solutions and comprehensive financial supply chain management strategies. This research concentrates on the end part of the purchasing process which is the handling of invoices. Efficient invoice processing can have an impact on organizations working capital management and thus provide companies with better readiness to face the challenges related to cash management. Leveraging a process mining solution the aim of this research was to examine the automated invoice handling process of four different organizations. The invoice data was collected from each organizations invoice processing system. The sample included all the invoices organizations had processed during the year 2012. The main objective was to find out whether e-invoices are faster to process in an automated invoice processing solution than scanned invoices (post entry into invoice processing solution). Other objectives included looking into the longest lead times between process steps and the impact of manual process steps on cycle time. Processing of invoices from maverick purchases was also examined. Based on the results of the research and previous literature on the subject, suggestions for improving the process were proposed. The results of the research indicate that scanned invoices were processed faster than e-invoices. This is mostly due to the more complex processing of e-invoices. It should be noted however that the manual tasks related to turning a paper invoice into electronic format through scanning are ignored in this research. The transitions with the longest lead times in the invoice handling process included both pre-automated steps as well as manual steps performed by humans. When the most common manual steps were examined in more detail, it was clear that these steps had a prolonging impact on the process. Regarding invoices from maverick purchases the evidence shows that these invoices were slower to process than invoices from purchases conducted through e-procurement systems and from preferred suppliers. Suggestions on how to improve the process included: increasing invoice matching, reducing of manual steps and leveraging of different value added services such as invoice validation service, mobile solutions and supply chain financing services. For companies that have already reaped all the process efficiencies the next step is to engage in collaborative financial supply chain management strategies that can benefit the whole supply chain.

GIS assessing traditional and modern agricultural land use/land cover change. A case study 1959-2005: Rekijoki, Somero, SW-Finland

Finland’s rural landscape has gone through remarkable changes from the 1950’s, due to agricultural developments. Changed farming practices have influenced especially traditional landscape management, and modifications in the arable land structure and grasslands transitions are notable. The review of the previous studies reveal the importance of the rural landscape composition and structure to species and landscape diversity, whereas including the relevance in presence of the open ditches, size of the field and meadow patches, topology of the natural and agricultural landscape. This land-change study includes applying remote sensed data from two time series and empirical geospatial analysis in Geographic Information Systems (GIS). The aims of this retrospective research is to detect agricultural landscape use and land cover change (LULCC) dynamics and discuss the consequences of agricultural intensification to landscape structure covering from the aspects of landscape ecology. Measurements of LULC are derived directly from pre-processed aerial images by a variety of analytical procedures, including statistical methods and image interpretation. The methodological challenges are confronted in the process of landscape classification and combining change detection approaches with landscape indices. Particular importance is paid on detecting agricultural landscape features at a small scale, demanding comprehensive understanding of such agroecosystems. Topological properties of the classified arable land and valley are determined in order to provide insight and emphasize the aspect the field edges in the agricultural landscape as important habitat. Change detection dynamics are presented with change matrix and additional calculations of gain, loss, swap, net change, change rate and tendencies are made. Transition’s possibility is computed following Markov’s probability model and presented with matrix, as well. Thesis’s spatial aspect is revealed with illustrative maps providing knowledge of location of the classified landscape categories and location of the dynamics of the changes occurred. It was assured that in Rekijoki valley’s landscape, remarkable changes in landscape has occurred. Landscape diversity has been strongly influenced by modern agricultural landscape change, as NP of open ditches has decreased and the MPS of the arable plot has decreased. Overall change in the diversity of the landscape is determined with the decrease of SHDI. Valley landscape considered as traditional land use area has experienced major transitional changes, as meadows class has lost almost one third of the area due to afforestation. Also, remarkable transitions have occurred from forest to meadow and arable land to built area. Boundaries measurement between modern and traditional landscape has indicated noticeable proportional increase in arable land-forest edge type and decrease in arable land-meadow edge type. Probability calculations predict higher future changes for traditional landscape, but also for arable land turning into built area.