Creating carbon footprint calculating tool for plastic packaging products

The environmental challenges of plastic packaging industry have increased remarkably along with climate change debate. The interest to study carbon footprints of packaging has increased in packaging industry to find out the real climate change impacts of packaging. In this thesis the greenhouse gas discharges of plastic packaging during their life cycle is examined. The carbon footprint is calculated for food packaging manufactured from plastic laminate. The structure of the laminate is low density polyethylene (PE-LD) and oriented polypropylene (OPP), which have been joined together with laminating adhesive. The purpose is to find out the possibilities to create a carbon footprint calculating tool for plastic packaging and its usability in a plastic packaging manufacturing company. As a carbon footprint calculating method PAS 2050 standard has been used. In the calculations direct and indirect greenhouse gas discharges as well as avoided discharges are considered. Avoided discharges are born for example in packaging waste utilization as energy. The results of the calculations have been used to create a simple calculating tool to be used for similar laminate structures. Although the utilization of the calculating tool is limited to one manufacturing plant because the primary activity data is dependent of geographical location and for example the discharges of used energy in the plant. The results give an approximation of the climate change potential caused by the laminate. It is although noticed that calculations do not include all environmental impacts of plastic packaging´s life cycle.

Utilization of non-wood pulp in different fibers products

The correct utilization of non-wood raw material allows reducing tree cutting and reduces emissions of carbon dioxide from burning of non-wood plants on farmers fields. Also it allows increasing economical situation in regions that non-wood plants are grown and where they are converted into pulp and paper. Also it gives positive effect on population pressure of work by addition of working place. In the literature survey included an overview of the historical meaning of non-wood pulp on developing paper production and structure of non-wood pulps. Moreover, anatomical and chemical composition of straw, reed and bamboo were studied more detailed. Also, an overview of the utilization of non-wood pulp in papermaking was made. Especially tissue, tree-free and release papers were reviewed. In the experimental part the goal was to investigate suitability of non-wood pulp like wheat straw pulp and bamboo pulp for different fiber products. Finally release and tree-free paper products were selected for experimental studies. It was discovered that wheat straw, especially screened wheat straw, showed good results for release paper. Also utilization of wheat straw and bamboo pulp in tree-free paper showed good results and suitability of these non-wood pulps for tree-free paper production. Also it was noticed that addition of wheat straw pulp gave positive effect on initial wet strength for release and tree-free paper.

Natural and synthetic fibres improving tensile strength and elongation of paper products

The theory part of the Master’s thesis introduces fibres with high tensile strength and elongation used in the production of paper or board. Strong speciality papers are made of bleached softwood long fibre pulp. The aim of the thesis is to find new fibres suitable for paper making to increase either tensile strength, elongation or both properties. The study introduces how fibres bond and what kind of fibres give the strongest bonds into fibre matrix. The fibres that are used the in manufacturing of non-wovens are long and elastic. They are longer than softwood cellulose fibres. The end applications of non-wovens and speciality papers are often the same, for instance, wet napkins or filter media. The study finds out which fibres are used in non-wovens and whether the same fibres could be added to cellulose pulp as armature fibres, what it would require for these fibres to be blended in cellulose, how they would bind with cellulose and whether some binding agents or thermal bonding, such as hot calendaring would be necessary. The following fibres are presented: viscose, polyester, nylon, polyethylene, polypropylene and bicomponent fibres. In the empiric part of the study the most suitable new fibres are selected for making hand sheets in laboratory. Test fibres are blended with long fibre cellulose. The test fibres are viscose (Tencel), polypropylene and polyethylene. Based on the technical values measured in the sheets, the study proposes how to continue trials on paper machine with viscose, polyester, bicomponent and polypropylene fibres.

Cost evaluation process for competitors' products

A company’s capability to map out its cost position compared to other market players is important for competitive decision making. One aspect of cost position is direct product cost that illustrates the cost efficiency of a company’s product designs. If a company can evaluate and compare its own and other market players’ direct product costs, it can implement better decisions in product development and management, manufacturing, sourcing, etc. The main objective of this thesis was to develop a cost evaluation process for competitors’ products. This objective includes a process description and an analysis tool for cost evaluations. Additionally, process implementation is discussed as well. The main result of this thesis was a process description consisting of a sixteen steps process and an Excel based analysis tool. Since literature was quite limited in this field, the solution proposal was combined from many different theoretical concepts. It includes influences from reverse engineering, product cost assessment, benchmarking and cost based decision making. This solution proposal will lead to more systematic and standardized cost position analyses and result in better cost transparency in decision making.

Packaging concept development for an assortment of medical device products

Diplomityön tavoitteena oli kehittää Wipak Oy:n valmistamille sterilointipakkauksille tulevaisuuden pakkauskonsepti. Sterilointipakkaukset luokitellaan lääkelaitedirektiivin mukaan lisätarvikkeiksi luokan 1 lääkelaitteille, ja tämä näkökulma oli vahvasti mukana konseptin kehityksessä. Lähtökohtana pakkauskonseptin suunnittelulle oli tuotteiden arvoketjussa, eli pakata tuotteet siten että pakkausten avulla voidaan tuottaa lisäarvoa arvoketjun toimijoille. Tavoitteena oli parantaa pakkausten viestintää, toimivuutta/tehokkuutta toimitusketjussa sekä vahvistaa brändin imagoa myynti- ja kuljetuspakkauksen avulla. Lääkinnälliset laitteet ja tarvikkeet ovat lainsäädännön ja normien avulla tarkasti säädeltyjä. Näiden normien vaatimukset asettavat perusteet myynti- ja kuljetuspakkausten kehittämiselle. Tämän lisäksi suunnittelussa on huomioitu asiakkaiden toiveet ja kehitystarpeet. Kirjallisuusosuudessa on keskitytty lääkinnällisten laitteiden pakkausyksiköiden toimintoihin sekä niiden kehitysnäkymiin. Pääpaino on ollut pakkausmerkintöjen ja jäljitettävyyden kehittämisellä, koska tietojen automaattisen tunnistuksen hyödyntäminen lääkintälaitteiden pakkausten arvoketjussa on kasvava trendi. Manuaalisesti tehtävät tuotevirtojen kirjaukset ketjun eri toimijoiden osalta lisäävät riskejä jäljitettävyyden kannalta ja aiheuttavat lisätyötä ja – kustannuksia ketjun kaikille osapuolille. Ehdotus uudesta pakkauskonseptista on kehitetty näiden tietojen pohjalta. Ehdotuksessa on huomioitu lainsäädännöstä ja ketjun toimijoilta tulevat tarpeet, sekä alan tulevaisuuden kehitysnäkymät. Ehdotetun pakkauskonseptin avulla saadaan lisättyä myynti- ja kuljetuspakkausten tehokkuutta, parannettua jäljitettävyyttä ja helpotettu arvoketjun alavirran toimijoiden työtä lisäämällä erillinen sisäpakkaus myyntiyksikön sisälle. Työssä on lisäksi selvitetty pakkauskonseptin kustannusvaikutukset tuotteiden hintaan. Lopussa on ehdotettu jatkotoimenpiteet suunnitelman implementoimisesta käytäntöön.

Effects of Country of Origin on Consumer Product Evaluations: Finnish clothing products in the minds of Russian tourists

Companies operating in today’s highly internationalized markets consider product differentiation the key priority in pursue to attain a constant competitive advantage in challenging global environment (Baker and Ballington 2002, 158). The main driver affecting companies’ differentiation actions was described as early as 1912 by one of the marketing pioneers A. W. Shaw (1912, 710) as meeting human wants more accurate than the competition, and thus increasing customers’ perceived value and satisfaction. Dickson and Ginter (1987, 2) point out in their study based on earlier research by Chamberlin (1965) and Porter (1976) that differentiation can be based on either tangible characteristics of a product such as design or intangible characteristics such as a brand name and country of origin (hereafter referred to as COO). The concept of COO and its impact on consumers’ evaluation of a product as an extrinsic product cue has been one of the most noteworthy topics in international marketing, having been voluminously examined by over 780 authors in more than 750 academic publications in the past 40 years (Papadopoulos and Heslop 2002, 294). Many of these studies accentuate the significant effect the COO has on consumers’ product attribute evaluations. People routinely associate country images with products and services in order to judge and categorize them based on perceived quality and risk levels; thereby COO can influence the likelihood of a purchase (Peterson and Jolibert 1995, 883-884; Verlegh and Steenkamp 1999, 523). Based on the vast research related to COO in the field of international business, it is widely recognized that the country associated with a product can act in a similar way as the name of a brand and even become a part of product’s total image. Thereby depending on customer’s values and perceptions, the product-country image can either increase or decrease perceived value.

Propulsion products services laakerikunnonvalvonnan ansaintalogiikan kehittäminen

Tämän työn ensisijaisena tavoitteena on selvittää ABB Oy, Marine & Cranes, Propulsion Products Services tarjoamien laakerikunnonvalvontatuotteiden luonne, tuotteistuksen tila, liiketoimintamalli ja tutkia, kuinka olemassa olevaa ansaintalogiikkaa voidaan kehittää. Teoreettisessa osassa käydään läpi palvelun määritelmää, palveluiden tuotteistamista, akateemisia tuotteistusprosessimalleja sekä liiketoimintamallin käsitettä. Liiketoimintamallin käsittely työssä keskittyy Osterwalderin (2010) liiketoimintamallikehykseen. Teoriaosuuden materiaalia hyödynnetään empiirisessä osuudessa laakerikunnonvalvonnan tuotteiden tuotteistuksen tilan, tuotteistusprosessimallin, liiketoimintamallin ja ansaintalogiikan kehittämiseen. Työn keskeisimpinä tuloksina saatiin kehitysehdotuksia työntilaajalle liittyen laakerikun- nonvalvonnan ansaintalogiikkaan ja palveluiden tuotteistamiseen. Työssä ilmeni, että yrityksen olisi suositeltavaa optimoida tehtävien palveluiden suorittamissatamat. Jo olemassa olevien tuotteiden dokumentointia tulisi täydentää työssä ehdotetun mukaisesti. Omien resurssien laajempaa käyttämistä tulisi lisätä ja laakerikunnonvalvonnan palvelupakettien päivittämistarve sekä valmiiden tuotteiden säännöllinen päivittäminen ja niiden mahdollinen poistaminen valikoimasta tulisi ottaa osaksi käytössä olevaa prosessia.

Determination of decomposition products of flotation collector chemicals using capillary electrophoresis

Vaahdotusta käytetään yleisesti erottamaan eri mineraaleja malmista. Tässä menetelmässä käytetään erityisiä pinta-aktiivisia aineita, joita kutsutaan kokoojakemikaaleiksi, muuntamaan halutut mineraalit hydrofobisiksi ja erottamaan ne hydrofiilisistä partikkeleista ilmakuplien avulla. Eräs tärkeimmistä kokoojakemikaalien ryhmistä on ksantaatit. Ksantaateilla on havaittu taipumusta hajota useiksi erilaisiksi hajoamistuotteiksi vaahdotusprosessin aikana. Näillä hajoamistuotteilla voi olla monia haitallisia vaikutuksia vaahdotuksen tuloksiin. Näiden tuotteiden tunnistaminen ja määrittäminen on tärkeää vaahdotusprosessin paremman ymmärtämisen kannalta. Työn kirjallisuusosassa vaahdotusprosessi, ksantaatit ja niiden yleisimmät hajoamistuotteet on esitelty, kuten myös käytetty analyysimenetelmä, kapillaarielektroforeesi. Työn kokeellisessa osassa etsittiin sopivaa erotusmenetelmää etyyliksantaatin, etyylitiokarbonaatin, etyyliperksantaatin ja etyyliksantyylitiosulfaatin erottamiseksi kapillaarilelektroforeesilla. Pääasiassa keskityttiin kahteen eri erotusmenetelmään. Ensimmäinen menetelmä kykeni erottamaan kaikki tutkitut tuotteet puhdasvesinäytteissä, ja toinen menetelmä oli sopiva näiden tuotteiden erottamiseen prosessivesinäytteissä. Jälkimmäistä menetelmää kokeiltiin käytännössä rikastamolla, jossa sillä kyettiin erottamaan isobutyyliksantaatti, isobutyylitiokarbonaatti, ja suurella todennäköisyydellä myös isobutyyliperksantaatti.

Potential utilization ways of recovered chemical products from digestate

The study evaluates the potential application of chemical substances, obtained from biogas plants` by-products. Through the anaerobic digestion process with biogas the large amount of digestate is produced. This digestate mainly consists on the organic matter with the high concentration of nutrients such as nitrogen and phosphorus. During ammonia stripping and phosphorus precipitation the products- ammonia water, ammonium sulfate, ammonium nitrate, ferrous phosphate, aluminum phosphate, calcium phosphate and struvite can be recovered. These chemicals have potential application in different industrial sectors. According to Finnish market and chemicals properties, the most perspective industrial applications were determined. Based on the data, obtained through the literature review and market study, the ammonia water was recognized as a most perspective recovered substances. According to interview provided among Finnish companies, ammonia water is used for flue gas treatment in SNCR technology. This application has a large scale in the framework of Finnish industrial sectors. As well nitrogen with phosphorous can be used as a source of nutrients in the biological wastewater treatment plants of paper mills.

Distribution channel plan for wound care products: Case 3M Finland Ltd.

The aim of this master’s thesis was to make a qualitative marketing research and on the basis of this to develop a distribution plan for the case company Finnish 3M Ltd.’s wound care products. The literature review includes three important parts: distribution channel planning, the buying behavior of seniors, and special characteristics of health care products’ marketing. The empirical part of this thesis comprises two different parts. The first part is a marketing research, in which the buying behavior of wound care products is studied in Espoo. The research aim was to examine, in which distribution channels the wound care patients under home care would most preferably buy wound care products during the time period, when municipalities will not yet provide the products for free. The data was collected through semi-structured phone interviews and regular interviews, and was treated qualitatively and anonymously. The study revealed that the recommendations of nurses and doctors influenced most the buying behavior of wound care customers. In the second part of the thesis a distribution channel plan for wound care products was made for the case company 3M Finland Ltd. based on the results. 3M Finland Ltd. should focus on pharmacies, online-stores and municipal health centers as their main distributors.

Target audience and message alignment for integrated marketing communication of luxury products: entering the Chinese market

The purpose of this study is to identify opportunities to match marketing communication message strategies with the target audience characteristics in the Chinese luxury market entry context. Therefore, consumer behaviour and psychographic marketing segmentation fields are being reviewed in a holistic view in order to identify the similarities and connection points. Through the analysis of the messages in advertisements placed in a certain luxury and fine living magazine, message creation strategies are being anticipated.

The requirements of a feasible plastic packaging material for cultured dairy products

The objective of this Master´s Thesis was to conduct a wide scale preliminary survey regarding the package requirements of a cultured dairy package, and to compare the currently used material polystyrene to other suitable packaging materials. Polystyrene has a long history of use in dairy cups, but in recent years its price has increased significantly compared to other common packaging materials. The overall environmental effects of a package and a package material are today a part of designing a sustainable product life cycle. In addition, in certain contexts there has been discussion of the risks posed by styrene polymer for the environment and for humans. These risks are also discussed in this thesis. Polystyrene (PS) is still the most widely used material in dairy cups. In recent years, polypropylene (PP) cups have appeared in increasing numbers on market shelves. This study focuses on the differences of the suitable polymers and examines the suitability of alternative “suitable” polymers with regards to dairy packaging. Aside from focusing on the cup manufacturer, this thesis also examines its subject matter from the viewpoint of the dairy customer, as well as observing the concrete implications of material changes in the overall value chain. It was known in advance that material permeability would be one of the determining factors and that gas transmission testing would be a significant part of the thesis. Mechanical tests were the second part of the testing process, providing information regarding package strength and protectiveness during the package’s life cycle. Production efficiency, along with uninterrupted stable production, was another important factor that was taken into consideration. These two issues are sometimes neglected in similar contexts due to their self-evident nature. In addition, materials used in production may have a surprising significance to the production and efficiency. Consistent high quality is also partly based on material selection. All of the aforementioned factors have been documented and the results have been analyzed by the development team at Coveris Rigid Finland. Coveris is now calculating the total finance effects and capacities should the material changes be implemented in practice. There are many factors in favor of switching to polypropylene at the moment. The overall production costs, as well as the environmental effects of resin production are the primary influences for said switch from the converters’ perspective.

Service product internationalisation : market selection for new service products in a multinational financial service firm

The significance and impact of services in the modern global economy has become greater and there has been more demand for decades in the academic community of international business for further research into better understanding internationalisation of services. Theories based on the internationalisation of manufacturing firms have been long questioned for their applicability to services. This study aims at contributing to understanding internationalisation of services by examining how market selection decisions are made for new service products within the existing markets of a multinational financial service provider. The study focused on the factors influencing market selection and the study was conducted as a case study on a multinational financial service firm and two of its new service products. Two directors responsible for the development and internationalisation of the case service products were interviewed in guided semi-structured interviews based on themes adopted from the literature review and the outcome theoretical framework. The main empirical findings of the study suggest that the most significant factors influencing the market selection for new service products within a multinational financial service firm’s existing markets are: commitment to the new service products by both the management and the rest of the product related organisation; capability and competence by the local country organisations to adopt new services; market potential which combines market size, market structure and competitive environment; product fit to the market requirements; and enabling partnerships. Based on the empirical findings, this study suggests a framework of factors influencing market selection for new service products, and proposes further research issues and methods to test and extend the findings of this research.

Development and characterization of thin printed films for gas sensing applications

The monitoring and control of hydrogen sulfide (H2S) level is of great interest for a wide range of application areas including food quality control, defense and antiterrorist applications and air quality monitoring e.g. in mines. H2S is a very poisonous and flammable gas. Exposure to low concentrations of H2S can result in eye irritation, a sore throat and cough, shortness of breath, and fluid retention in the lungs. These symptoms usually disappear in a few weeks. Long-term, low-level exposure may result in fatigue, loss of appetite, headache, irritability, poor memory, and dizziness. Higher concentrations of 700 - 800 ppm tend to be fatal. H2S has a characteristic smell of rotten egg. However, because of temporary paralysis of olfactory nerves, the smelling capability at concentrations higher than 100 ppm is severely compromised. In addition, volatile H2S is one of the main products during the spoilage of poultry meat in anaerobic conditions. Currently, no commercial H2S sensor is available which can operate under anaerobic conditions and can be easily integrated in the food packaging. This thesis presents a step-wise progress in the development of printed H2S gas sensors. Efforts were made in the formulation, characterization and optimization of functional printable inks and coating pastes based on composites of a polymer and a metal salt as well as a composite of a metal salt and an organic acid. Different processing techniques including inkjet printing, flexographic printing, screen printing and spray coating were utilized in the fabrication of H2S sensors. The dispersions were characterized by measuring turbidity, surface tension, viscosity and particle size. The sensing films were characterized using X-ray photoelectron spectroscopy, X-ray diffraction, atomic force microscopy and an electrical multimeter. Thin and thick printed or coated films were developed for gas sensing applications with the aim of monitoring the H2S concentrations in real life applications. Initially, a H2S gas sensor based on a composite of polyaniline and metal salt was developed. Both aqueous and solvent-based dispersions were developed and characterized. These dispersions were then utilized in the fabrication of roll-to-roll printed H2S gas sensors. However, the humidity background, long term instability and comparatively lower detection limit made these sensors less favourable for real practical applications. To overcome these problems, copper acetate based sensors were developed for H2S gas sensing. Stable inks with excellent printability were developed by tuning the surface tension, viscosity and particle size. This enabled the formation of inkjet-printed high quality copper acetate films with excellent sensitivity towards H2S. Furthermore, these sensors showed negligible humidity effects and improved selectivity, response time, lower limit of detection and coefficient of variation. The lower limit of detection of copper acetate based sensors was further improved to sub-ppm level by incorporation of catalytic gold nano-particles and subsequent plasma treatment of the sensing film. These sensors were further integrated in an inexpensive wirelessly readable RLC-circuit (where R is resistor, L is inductor and C is capacitor). The performance of these sensors towards biogenic H2S produced during the spoilage of poultry meat in the modified atmosphere package was also demonstrated in this thesis. This serves as a proof of concept that these sensors can be utilized in real life applications.