Opportunities, constraints and constrained opportunities – A study on mothers’ working time patterns in 22 European countries

The aim of this study was to analyse mothers’ working time patterns across 22 European countries. The focus was on three questions: how much mothers prefer to work, how much they actually work, and to what degree their preferred and actual working times are (in)consistent with each other. The focus was on cross-national differences in mothers’ working time patterns, comparison of mothers’ working times to that of childless women and fathers, as well as on individual- and country-level factors that explain the variation between them. In the theoretical background, the departure point was an integrative theoretical approach where the assumption is that there are various kinds of explanations for the differences in mothers’ working time patterns – namely structural, cultural and institutional – , and that these factors are laid in two levels: individual- and country-levels. Data were extracted from the European Social Survey (ESS) 2010 / 2011. The results showed that mothers’ working time patterns, both preferred and actual working times, varied across European countries. Four clusters were formed to illustrate the differences. In the full-time pattern, full-time work was the most important form of work, leaving all other working time forms marginal. The full-time pattern was perceived in terms of preferred working times in Bulgaria and Portugal. In polarised pattern countries, fulltime work was also important, but it was accompanied by a large share of mothers not working at all. In the case of preferred working times, many Eastern and Southern European countries followed it whereas in terms of actual working times it included all Eastern and Southern European countries as well as Finland. The combination pattern was characterised by the importance of long part-time hours and full-time work. It was the preferred working time pattern in the Nordic countries, France, Slovenia, and Spain, but Belgium, Denmark, France, Norway, and Sweden followed it in terms of actual working times. The fourth cluster that described mothers’ working times was called the part-time pattern, and it was illustrated by the prevalence of short and long part-time work. In the case of preferred working times, it was followed in Belgium, Germany, Ireland, the Netherlands and Switzerland. Besides Belgium, the part-time pattern was followed in the same countries in terms of actual working times. The consistency between preferred and actual working times was rather strong in a majority of countries. However, six countries fell under different working time patterns when preferred and actual working times were compared. Comparison of working mothers’, childless women’s, and fathers’ working times showed that differences between these groups were surprisingly small. It was only in part-time pattern countries that working mothers worked significantly shorter hours than working childless women and fathers. Results therefore revealed that when mothers’ working times are under study, an important question regarding the population examined is whether it consists of all mothers or only working mothers. Results moreover supported the use of the integrative theoretical approach when studying mothers’ working time patterns. Results indicate that mothers’ working time patterns in all countries are shaped by various opportunities and constraints, which are comprised of structural, cultural, institutional, and individual-level factors.

Liiketoimintatiedonhallinnan hyödyntämisen esteet päätettäessä palveluista. Case: Kunnalliset pelastustoimen liikelaitokset ja eriytetyt taseyksiköt

Pelastuslaitosten liiketoimintatiedonhallinnalla, tietoperusteisuudella ja tietojohtamisella on tulevaisuudessa merkittävä rooli päätettäessä palveluista. Julkisen pelastustoimen kuntien liikelaitoksina ja eriytettyinä taseyksiköinä toimivien pelastuslaitosten haasteet tulevat olemaan jatkossa tehokkaiden ja vaikuttavien palveluiden strategisessa johtamisessa ja suunnittelussa. Näistä asioista päättäminen on kriittinen vaihe onnistumisen kannalta. Päätöksenteko eri tasoilla tarvitsee tuekseen toiminnasta ja palveluista kanavoitua analysoitua tietoa. Asiakastarpeesta lähtevä vaikuttavuus ja laatu korostuvat. Liiketoimintatiedonhallinta ja tietoperusteisuus haastavat pelastuslaitoksen johtamisjärjestelmän. Johtamisen kyvykkyys ja henkilöstön osaaminen ovat tietoperusteisuuden ja tiedonhallinnan keskiössä. Systemaattisen liiketoimintatiedonhallinnan ja tietoperusteisuuden erottaa perinteisestä virkamiehen tietojen hyväksikäytöstä käsitteen kokonaisvaltaisuus ja järjestelmällisyys kaikessa tiedollisessa toiminnassa. Tämä kattaa tietojärjestelmät, mittarit, prosessit, strategian suunnitelmat, asiakirjat, raportoinnin, kehittämisen ja tutkimuksen. Liiketoimin-tatiedonhallinta ja tietojohtaminen linkittävät kaiken toisiinsa muodostaen keskinäisriippuvaisen yhtenäisen järjestelmän ja kokonaisvaltaisen ymmärryksen. Tutkimukseni on laadullinen tutkimus jossa tiedon keruu ja analysointi on toteutettu toisiaan tukevilla tutkimusotteilla. Metodologia nojaa teorialähtöiseen systemaattiseen analyysiin, jossa on valikoituja osia sisällön analyysistä. Tutkimuksessa on käytetty aineisto- ja menetelmätriangulaatioita. Tutkimuksen aineisto on kerätty teemahaastatteluilla valittujen kohde pelastuslaitosten asiantuntijoilta palveluiden päätös- ja suunnittelutasolta, johtoryhmistä ja joh-tokunnista. Haastatteluja varten tutkija on tutustunut kohdepelastuslaitosten palveluita mää-rittävään tiedolliseen dokumentaatioon kuten palvelutasopäätöksiin ja riskianalyyseihin. Ai-neisto keruun kohteiksi valikoitui pääkaupunkiseudun alueen pelastuslaitokset: Helsingin kaupungin pelastuslaitos sekä Itä-, Keski- ja Länsi-Uudenmaan pelastuslaitokset. Tulosten mukaan pelastuslaitosten keskeiset liiketoimintatiedonhallinnan esteet muodostuvat johtamisen ongelmista, organisaation muutosvastarinnasta ja päätöksenteon tietoperusteen puutteesta. Nämä ilmenevät strategisen johtamisen puutteina, vaikuttavuuden mittaamisen sekä tiedon jalostamisen ongelmina. Keskeistä tiedollista yhdistävää ja linkittävää tekijää ei tunnisteta ja löydetä. Tiedollisessa liiketoimintatiedonhallinnan prosessityössä voisi olla tulos-ten mukaan mahdollisuuksia tämän tyhjiön täyttämiseen. Pelastuslaitoksille jää tulevaisuudessa valinta suunnasta johon ne haluavat edetä tiedonhal-linnan, tietojohtamisen ja tietoperusteisuuden kanssa. Tämä vaikuttaa kehitykseen ja tavoitteeseen keskeisistä palveluiden päätöksentekoa tukevista johtamis- ja tietojärjestelmistä, tietoa kokoavista ja luovista dokumenteista sekä organisaation joustavasta rakenteesta. Tietoprosessiin, tiedon prosessimaiseen johtamiseen ja systemaattiseen tiedonhallintaan meneminen vaikuttaa tutkimuksen tulosten mukaan lupaavalta mahdollisuudelta. Samalla se haastaa pelauslaitokset suureen kulttuuriseen muutokseen ja asettaa uusien vaikuttavuusmittareiden tuottaman tiedon ennakoivan hyväksynnän vaateen strategiselle suunnittelulle. Tämä vaatii pelastuslaitosten johdolta ja henkilöstöltä osaamista, yhteisymmärrystä, muutostarpeiden hyväksyntää sekä asiakkaan asettamista vaikuttavuuden keskiöön.

Production, isolation and characterization of bioactive peptides with antihypertensive properties from rapeseed and potato protein

Consumers’ increasing awareness of healthiness and sustainability of food presents a great challenge to food industry to develop healthier, biologically active and sustainable food products. Bioactive peptides derived from food proteins are known to possess various biological activities. Among the activities, the most widely studied are antioxidant activities and angiotensin I converting enzyme (ACE) inhibitory activity related to blood pressure regulation and antihypertensive effects. Meanwhile, vast amounts of byproducts with high protein content are produced in food industry, for example potato and rapeseed industries. The utilization of these by-products could be enhanced by using them as a raw material for bioactive peptides. The objective of the present study was to investigate the production of bioactive peptides with ACE inhibitory and antioxidant properties from rapeseed and potato proteins. Enzymatic hydrolysis and fermentation were utilized for peptide production, ultrafiltration and solid-phase extraction were used to concentrate the active peptides, the peptides were fractionated with liquid chromatographic processes, and the peptides with the highest ACE inhibitory capacities were putified and analyzed with Maldi-Tof/Tof to identify the active peptide sequences. The bioavailability of the ACE inhibitory peptides was elucidated with an in vitro digestion model and the antihypertensive effects in vivo of rapeseed peptide concentrates were investigated with a preventive premise in 2K1C rats. The results showed that rapeseed and potato proteins are rich sources of ACE inhibitory and antioxidant peptides. Enzymatic hydrolysis released the peptides effectively whereas fermentation produced lower activities.The native enzymes of potato were also able to release ACE inhibitory peptides from potato proteins without the addition of exogenous enzymes. The rapeseed peptide concentrate was capable of preventing the development of hypertension in vivo in 2K1C rats, but the quality of rapeseed meal used as raw material was found to affect considerably the antihypertensive effects and the composition of the peptide fraction.

Advanced analysis and design methods for preparative chromatographic separation processes

Preparative liquid chromatography is one of the most selective separation techniques in the fine chemical, pharmaceutical, and food industries. Several process concepts have been developed and applied for improving the performance of classical batch chromatography. The most powerful approaches include various single-column recycling schemes, counter-current and cross-current multi-column setups, and hybrid processes where chromatography is coupled with other unit operations such as crystallization, chemical reactor, and/or solvent removal unit. To fully utilize the potential of stand-alone and integrated chromatographic processes, efficient methods for selecting the best process alternative as well as optimal operating conditions are needed. In this thesis, a unified method is developed for analysis and design of the following singlecolumn fixed bed processes and corresponding cross-current schemes: (1) batch chromatography, (2) batch chromatography with an integrated solvent removal unit, (3) mixed-recycle steady state recycling chromatography (SSR), and (4) mixed-recycle steady state recycling chromatography with solvent removal from fresh feed, recycle fraction, or column feed (SSR–SR). The method is based on the equilibrium theory of chromatography with an assumption of negligible mass transfer resistance and axial dispersion. The design criteria are given in general, dimensionless form that is formally analogous to that applied widely in the so called triangle theory of counter-current multi-column chromatography. Analytical design equations are derived for binary systems that follow competitive Langmuir adsorption isotherm model. For this purpose, the existing analytic solution of the ideal model of chromatography for binary Langmuir mixtures is completed by deriving missing explicit equations for the height and location of the pure first component shock in the case of a small feed pulse. It is thus shown that the entire chromatographic cycle at the column outlet can be expressed in closed-form. The developed design method allows predicting the feasible range of operating parameters that lead to desired product purities. It can be applied for the calculation of first estimates of optimal operating conditions, the analysis of process robustness, and the early-stage evaluation of different process alternatives. The design method is utilized to analyse the possibility to enhance the performance of conventional SSR chromatography by integrating it with a solvent removal unit. It is shown that the amount of fresh feed processed during a chromatographic cycle and thus the productivity of SSR process can be improved by removing solvent. The maximum solvent removal capacity depends on the location of the solvent removal unit and the physical solvent removal constraints, such as solubility, viscosity, and/or osmotic pressure limits. Usually, the most flexible option is to remove solvent from the column feed. Applicability of the equilibrium design for real, non-ideal separation problems is evaluated by means of numerical simulations. Due to assumption of infinite column efficiency, the developed design method is most applicable for high performance systems where thermodynamic effects are predominant, while significant deviations are observed under highly non-ideal conditions. The findings based on the equilibrium theory are applied to develop a shortcut approach for the design of chromatographic separation processes under strongly non-ideal conditions with significant dispersive effects. The method is based on a simple procedure applied to a single conventional chromatogram. Applicability of the approach for the design of batch and counter-current simulated moving bed processes is evaluated with case studies. It is shown that the shortcut approach works the better the higher the column efficiency and the lower the purity constraints are.

Mobile Banking and Mobile Payments: Changing Banking Services in Finland

The purpose of this thesis is to examine how mobile banking and mobile payments services will change the banking sector in Finland, and what role non-bank companies from the IT and telecom industries will play in this process. The thesis consists of a literature review and a qualitative study. The literature review forms a comprehensive overview of mobile banking and mobile payments services. The qualitative research was conducted as a descriptive study, focusing on the views of bank and non-bank players. The results show that banks have a significant advantage over their IT and telecom rivals in regards to their service offering, financial buffer, and status as trustworthy institutions. The banks’ embrace of mobile financial services will change the Finnish banking sector into one, with a light branch network focused on sales power, and a heavy emphasis on new mobile devices providing service power regardless of time and place.

The role of business model in computer game development organizations

The computer game industry has grown steadily for years, and in revenues it can be compared to the music and film industries. The game industry has been moving to digital distribution. Computer gaming and the concept of business model are discussed among industrial practitioners and the scientific community. The significance of the business model concept has increased in the scientific literature recently, although there is still a lot of discussion going on on the concept. In the thesis, the role of the business model in the computer game industry is studied. Computer game developers, designers, project managers and organization leaders in 11 computer game companies were interviewed. The data was analyzed to identify the important elements of computer game business model, how the business model concept is perceived and how the growth of the organization affects the business model. It was identified that the importance of human capital is crucial to the business. As games are partly a product of creative thinking also innovation and the creative process are highly valued. The same applies to technical skills when performing various activities. Marketing and customer relationships are also considered as key elements in the computer game business model. Financing and partners are important especially for startups, when the organization is dependent on external funding and third party assets. The results of this study provide organizations with improved understanding on how the organization is built and what business model elements are weighted.

Exploring Relationship between Pakistani Teachers’ Pedagogical Beliefs and ICT Use for Teaching and Learning

Background: The aim of present study is to investigate relationship between Pakistani teachers’ pedagogical beliefs and ICT use for teaching and learning. Previous studies found close relationship between pedagogical beliefs and teaching practices including use of ICT. However, variation in results is also reported and attributed to cultural and contextual differences. Methodology: Quantitative approach was used to study a sample of 231 Pakistani basic education teachers from middle and upper-middle range private schools, mostly from large urban centres. Results: This study confirmed previously study results that constructivist-compatible pedagogical beliefs are significantly related to both traditional and constructivist use of ICT. However, it is also found that traditional-transmission pedagogical beliefs are significantly related to traditional use of ICT – a finding not reported in previous studies. Some amounts of ICT training for pedagogical purpose exhibit significant impact on ICT use, in particular constructivist use of ICT. Similarly age also play a role as younger teachers are more likely to use ICT, however, no significant difference of pedagogical beliefs and ICT use was found between male and female teachers. Recommendation for practice and further investigation are made in chapter 5.

Linguistic skills and trust creation in international business relationships

Today’s international business in highly related to crossing national, cultural and linguistic borders making communication and linguistic skills a vital part of the trade. The purpose of the study is to understand the role of linguistic skills in trust creation in international business relationships. Subobjectives are to discuss the importance of linguistic skills in international business context, to evaluate the strategic value of trust in business relationships and to analyze the extent to which linguistic skills affect trust formation. The scope is restricted to business-to-business markets. The theoretical background consists of different theories and previous studies related to trust and linguistic skills. Based on the theory a new LTS-framework is created to demonstrate a process model of linguistic skills affecting trust creation in international B2B relationships. This study is qualitative using interviews as a data collection method. Altogether eleven interviews were conducted between October 2014 and February 2015. All of the interviewees worked for organizations operating in the field of international business in B2B markets, spoke multiple languages and had a lot of experience in sales and negotiations. This study confirms that linguistic skills are an important part of international business. In many organizations English is used as lingua franca. However, there are several benefits of speaking the mother tongue of the customer. It makes people feel more relaxed and it makes the relationship more intimate and allows to continue developing it at a more personal level. From the strategic point of view trust creates competitive advantage to a company adding strategic value to the business. The data also supported the view that linguistic skills definitely impact the trust formation process. Quickness and easiness could be stated as the main benefits. It was seen that trust forms faster because both parties understand each other better and they become more open about information sharing within a shorter period of time. These findings and the importance of linguistic skills in trust creation should be acknowledged by organizations, especially regarding the human resource management. Boundary spanners are in key positions so special attention should be put into hiring and educating employees which then take care of company’s relationships. Eventually, these benefits are economical and affect to the profitability of the organization

Carbon pricing and its effect on company profitability

In order to reach the 2°C climate target, the carbon price should rise significantly in order for it to be financially rewarding for companies to reduce their emissions. This research aims to find how a significant increase in the carbon price would affect the profitability of companies. Prior research has not found consensus on how regulatory policies affect companies. This research looks at profitability factors of carbon pricing through a mix of related issues such as the carbon risk, carbon pricing mechanisms and cost pass-through of additional costs. The research is quantitative and examines financial data and emissions data regarding scope 1 and scope 2 emissions on 328 European companies. The data analysis method utilised is a sensitivity analysis conducted as a scenario analysis. Different price increases and cost pass-through rates are tested to see how company profitability is affected. As the companies are distributed between 9 sectors and 53 industries, the results vary. The industries that are found to be affected by an increase in carbon pricing show drastic negative changes in profitability. The results complement prior research identifying the most carbon-intensive industries, but also provide some new insights on industries that may be affected by carbon pricing. Industries related to manufacturing, electricity and energy are partly significantly impacted, but also industries related to tourism and food show potential signs of impact when an increased carbon price is introduced.