Benchmarked Quality Measurement Process in a Software Validation Process

Jatkuva laadunmittaus osana ohjelmistoprosessia on yleistynyt ohjelmistoyritysten keskuudessa viime vuosien aikana. ISO 9001:2000 -laatustandardi vaatii yrityksiltä tuotteiden ja prosessien laadun mittaamista ja seuraamista. Laadun mittareiden valinta on haastava tehtävä. Yritykset luulevat usein mittaavansa laatua, vaikka ne todellisuudessa mittaavatkin ohjelmistojen eri ominaisuuksia kuten kokoa tai monimutkaisuutta. Tässä diplomityössä kehitetään ohjelmistojen validointiprosessiin vertailuun perustuva laadunmittausprosessi ohjelmistotuotteiden laadun arviointiin, mittaamiseen ja seurantaan. Laatumittarit valitaan ennalta määriteltyjen kriteereiden mukaisesti, ja niille asetetaan tavoitearvot vertailuanalyysistä saatujen tulosten perusteella. Laadunmittausprosessin lisäksi työssä annetaan suositus prosessin käyttöönotosta ja käytöstä osana yrityksen toimintaa, mikä mahdollistaa jatkuvan seurannan sekä kehityksen tulevaisuudessa.

Describing and Analyzing Information Technology through Total Quality Management and Process Management: Case Stora Enso Newsprint

Laatu on osaltaan vahvistamassa asemaansa liike-elämässä yritysten kilpaillessa kansainvälisillä markkinoilla niin hinnalla kuin laadulla. Tämä suuntaus on synnyttänyt useita laatuohjelmia, joita käytetään ahkerasti yritysten kokonais- valtaisen laatujohtamisen (TQM) toteuttamisessa. Laatujohtaminen kattaa yrityksen kaikki toiminnot ja luo vaatimuksia myös yrityksen tukitoimintojen kehittämiselle ja parantamiselle. Näihin lukeutuu myös tämän tutkimuksen kohde tietohallinto (IT). Tutkielman tavoitteena oli kuvata IT prosessin nykytila. Tutkielmassa laadittu prosessikuvaus pohjautuu prosessijohtamisen teoriaan ja kohdeyrityksen käyttämään laatupalkinto kriteeristöön. Tutkimusmenetelmänä prosessin nykytilan selvittämiseksi käytettiin teemahaastattelutta. Prosessin nykytilan ja sille asetettujen vaatimusten selvittämiseksi haastateltiin IT prosessin asiakkaita. Prosessianalyysi, tärkeimpien ala-prosessien tunnistaminen ja parannusalueiden löytäminen ovat tämän tutkielman keskeisemmät tulokset. Tutkielma painottui IT prosessin heikkouksien ja parannuskohteiden etsimiseen jatkuvan kehittämisen pohjaksi, ei niinkään prosessin radikaaliin uudistamiseen. Tutkielmassa esitellään TQM:n periaatteet, laatutyökaluja sekä prosessijohtamisen terminologia, periaatteet ja sen systemaattinen toteutus. Työ antaa myös kuvan siitä, miten TQM ja prosessijohtaminen niveltyvät yrityksen laatutyössä.

Quality in services marketing in infocom sector in Finland

Tutkielman tavoitteena oli selvittää, mikä on palvelun laadun taso infocom sektorilla Suomessa, ja miten sitä voidaan parantaa. Teoriaosassa tavoitteeseen pyrittiin muodostamalla teoriakirjallisuuteen, tieteellisiin julkaisuihin sekä aikaisempaan aihealuetta sivuavaan tutkimukseen perustuva viitekehysmalli. Empiirisessä osassa tavoitetta lähestyttiin tutkimalla infocom sektorin kunkin toimialueen (telekommunikaatio, informaatio teknologia ja sisältötuotanto) palvelujen laatua case-kuvausten muodossa. Tutkielman empiirinen osuus toteutettiin kvalitatiivisena multiple case -tutkimuksena teemahaastattelu-menetelmää soveltaen. Case-analyysi suorittiin käyttäen ns. explanation- building -menetelmää. Teoreettiset ja empiiriset tutkimustulokset yhdistettiin erityisiksi infocom sektorille soveltuviksi toimenpidesuosituksiksi. Tutkielman empiirinen osuus antoi tukea teoreettisen osuuden pohjalta kehitetylle viitekehykselle. Tutkimuksen tavoitteena oli case-analyysi- menetelmän mukaisesti luoda perusta syvemmälle aihepiiriä käsittelevälle jatkotutkimukselle ja luoda kuva infocom sektorin tämän hetkisestä laadullisesta tilasta. Yhteenvetona voidaan sanoa, että laatu palvelujen markkinoinnissa infocom sektorilla on suhteellisen heikkoa, vaikka tutkimusaineiston mukaan laatu arvostetaan hyvin korkealle. Yritysten tämänhetkiset panostukset laatuun liittyvät lähinnä liiketoiminnan tukifunktioihin ja prosessien ohjausmenetelmiä koskeviin järjestelmiin. Tutkimuksen pohjalta tehtävät varsinaiset toimenpidesuositukset liittyvät laadun sisäistämiseen jo strategiaa luotaessa, asiakaslähtöisyyteen, laatujohtamiseen, laatukoulutukseen ja kokonaisvaltaisen laatukulttuurin luomiseen organisaatioissa. Turbulentissa, nopeasti kansainvälistyvässä ja erittäin voimakkaasti kilpaillussa liiketoimintaympäristössä nämä ovat elintärkeitä menestymisen kriteerejä.

Service Quality of ASPs (Application Service Providers): Case of an E-accounting Service

Service quality has been a hot topic in services marketing research since the ‘80s. Although it has been widely researched in the B2C context, as well as there is some research in the B2B side, it has received very little attention specifically in the context of the ASP (Application Service Provider) business model. The thesis uses streams of service quality literature in B2C and B2B as well as research of the ASP model to form a comprehensive understanding of service quality in the context of the ASPs. The empirical part consists of a case study of Netvisor, a fast-growing Finnish ASP providing e-accounting services. The key findings are that some traditional service quality dimensions seem to apply also in the ASP context and the relative importance of some dimensions differs with regard to different customer levels. Suggestions are made to improve the service quality of the case company.

Quality standards in e-business software development

Large enterprises have for many years employed eBusiness solutions in order to improve their efficiency. Smaller companies, however, have not been able to leverage these technologies due to the high level of know-how and resources required in implementing them. To solve this, novel software services are being developed to facilitate eBusiness adoption for the small enterprise with the aim of making B2Bi feasible not only between large organisations but also between trading partners of all sizes. The objective of this study was to find what standards and techniques on eBusiness and software testing and quality assurance fit best for building these new kinds of software considering the requirements their unique eBusiness approach poses. The research was conducted as a literature study with focus on standards on software testing and quality assurance together with standards on eBusiness. The study showed that the current software testing and quality assurance standards do not possess such characteristics as would make select standards evidently better fitted for building this type of software, which were established to be best developed as web services in order for them to meet their requirements. A selection of eBusiness standards and technologies was proposed to support this approach. The main finding in the study was, however, that these kinds of web services that have high interoperability requirements will have to be able to carry out automated interoperability and conformance testing as part of their operation; this objective dictates how the software are built and how testing during software development is to be done. The study showed that research on automated interoperability and conformance testing for web services is still limited and more research is needed to make the building of highly-interoperable web services more feasible.

Measuring Cost of Poor Quality in Industrial Electronics

Quality is not only free but it can be a profit maker. Every dollar that is not spent on doing things wrong becomes a dollar right on the bottom line. The main objective of this thesis is to give an answer on how cost of poor quality can be measured theoretically correctly. Different calculation methods for cost of poor quality are presented and discussed in order to give comprehensive picture about measurement process. The second objective is to utilize the knowledge from the literature review and to apply it when creating a method for measuring cost of poor quality in supplier performance rating. Literature review indicates that P-A-F model together with ABC methodology provides a mean for quality cost calculations. These models give an answer what should be measured and how this measurement should be carried out. However, when product or service quality costs are incurred when quality character derivates from target value, then QLF seems to be most appropriate methodology for quality cost calculation. These methodologies were applied when creating a quality cost calculation method for supplier performance ratings.

Process approach in quality management - Case: ECO process development in EMS industry

The aim of the thesis was to study quality management with process approach and to find out how to utilize process management to improve quality. The operating environment of organizations has changed. Organizations are focusing on their core competences and networking with suppliers and customers to ensure more effective and efficient value creation for the end customer. Quality management is moving from inspection of the output to prevention of problems from occurring in the first place and management thinking is changing from functional approach to process approach. In the theoretical part of the thesis, it is studied how to define quality, how to achieve good quality, how to improve quality, and how to make sure the improvement goes on as never ending cycle. A selection of quality tools is introduced. Process approach to quality management is described and compared to functional approach, which is the traditional way to manage operations and quality. The customer focus is also studied, and it is presented, that to ensure long term customer commitment, organization needs to react to changing customer requirements and wishes by constantly improving the processes. In the experimental part the theories are tested in a process improvement business case. It is shown how to execute a process improvement project starting from defining the customer requirements, continuing to defining the process ownership, roles and responsibilities, boundaries, interfaces and the actual process activities. The control points and measures are determined for the process, as well as the feedback and corrective action process, to ensure continual improvement can be achieved and to enable verification that customer requirements are fulfilled.

Young Registered Nurses’ Intent to Leave the Profession in Finland - A Mixed-Method Study

The purpose of this study was to examine and expand understanding concerning young Finnish registered nurses (RN) with an intention to leave the profession and the related variables, specifically when that intention has emerged before the age of 30. The overall goal of the study was to develop a conceptual model in relation to young RNs’ intention to leave the profession. Suggestions for policymakers, nurse leaders and nurse managers are presented for how to retain more young RNs in the nursing workforce. Suggestions for future nursing research are also provided. Phase I consists of two sequential integrative literature reviews of 75 empirical articles concerning nurses’ intention to leave the profession. In phase II, data had been collected as part of the Nurses’ Early Exit (NEXT) study, using the BQ-12 structured postal questionnaire. A total of 147 young RNs participated in the study. The data were analysed with statistical methods. In phase III, firstly, an in-depth interpretive case study was conducted in order to understand how young RNs explain and make sense of their intention to leave the profession. The data in this study consisted of longitudinal career stories by three young RNs. The data was analysed by using narrative holistic-content and thematic methods. Secondly, a total of 15 young RNs were interviewed in order to explore in-depth their experiences concerning organizational turnover and their intent to leave the profession. The data was analysed using conventional content analysis. Based on earlier research, empirical research on the young RNs intention to leave the profession is scarce. Nurses’ intention to leave the profession has mainly been studied with quantitative descriptive studies, conducted with survey questionnaires. Furthermore, the quality of previous studies varies considerably. Moreover, nurses’ intention to leave the profession seems to be driven by a number of variables. According to the survey study, 26% of young RNs had often considered giving up nursing completely and starting a different kind of job during the course of the previous year. Many different variables were associated with an intention to leave the profession (e.g. personal burnout, job dissatisfaction). According to the in-depth inquiries, poor nursing practice environments and a nursing career as a ‘second-best’ or serendipitous career choice were themes associated with young RNs’ intention to leave the profession. In summary, young RNs intention to leave the profession is a complex phenomenon with multiple associated variables. These findings suggest that policymakers, nurse leaders and nurse managers should enable improvements in nursing practice environments in order to retain more young RNs. These improvements can include, for example, adequate staffing levels, balanced nursing workloads, measures to reduce work-related stress as well as possibilities for advancement and development. Young RNs’ requirements to provide high-quality and ethical nursing care must be recognized in society and health-care organizations. Moreover, sufficient mentoring and orientation programmes should be provided for all graduate RNs. Future research is needed into whether the motive for choosing a nursing career affects the length of the tenure in the profession. Both quantitative and in-depth research is needed for the comprehensive development of nursing-turnover research.

Ensuring the efficient utilization of Business Intelligence

In recent years, chief information officers (CIOs) around the world have identified Business Intelligence (BI) as their top priority and as the best way to enhance their enterprises competitiveness. Yet, many enterprises are struggling to realize the business value that BI promises. This discrepancy causes important questions, for example: what are the critical success factors of Business Intelligence and, more importantly, how it can be ensured that a Business Intelligence program enhances enterprises competitiveness. The main objective of the study is to find out how it can be ensured that a BI program meets its goals in providing competitive advantage to an enterprise. The objective is approached with a literature review and a qualitative case study. For the literature review the main objective populates three research questions (RQs); RQ1: What is Business Intelligence and why is it important for modern enterprises? RQ2: What are the critical success factors of Business Intelligence programs? RQ3: How it can be ensured that CSFs are met? The qualitative case study covers the BI program of a Finnish global manufacturer company. The research questions for the case study are as follows; RQ4: What is the current state of the case company’s BI program and what are the key areas for improvement? RQ5: In what ways the case company’s Business Intelligence program could be improved? The case company’s BI program is researched using the following methods; action research, semi-structured interviews, maturity assessment and benchmarking. The literature review shows that Business Intelligence is a technology-based information process that contains a series of systematic activities, which are driven by the specific information needs of decision-makers. The objective of BI is to provide accurate, timely, fact-based information, which enables taking actions that lead to achieving competitive advantage. There are many reasons for the importance of Business Intelligence, two of the most important being; 1) It helps to bridge the gap between an enterprise’s current and its desired performance, and 2) It helps enterprises to be in alignment with key performance indicators meaning it helps an enterprise to align towards its key objectives. The literature review also shows that there are known critical success factors (CSFs) for Business Intelligence programs which have to be met if the above mentioned value is wanted to be achieved, for example; committed management support and sponsorship, business-driven development approach and sustainable data quality. The literature review shows that the most common challenges are related to these CSFs and, more importantly, that overcoming these challenges requires a more comprehensive form of BI, called Enterprise Performance Management (EPM). EPM links measurement to strategy by focusing on what is measured and why. The case study shows that many of the challenges faced in the case company’s BI program are related to the above-mentioned CSFs. The main challenges are; lack of support and sponsorship from business, lack of visibility to overall business performance, lack of rigid BI development process, lack of clear purpose for the BI program and poor data quality. To overcome these challenges the case company should define and design an enterprise metrics framework, make sure that BI development requirements are gathered and prioritized by business, focus on data quality and ownership, and finally define clear goals for the BI program and then support and sponsor these goals.

Enabling Change in Universities: Enhancing Education for Sustainable Development with Tools for Quality Assurance

Enabling Change in Universities: Enhancing Education for Sustainable Development with Tools for Quality Assurance This thesis deals with enabling change in universities, more explicitly enhancing education for sustainable development with tools for quality assurance. Change management is a discipline within management that was developed in the 1980s because business changed from being predictable to unpredictable. The PEST mnemonic is a method to categorize factors enabling change; such as political, economic, socio-cultural and technological factors, which all affect higher education. A classification of a change, in either hard or soft, can help understanding the type of change that an organization is facing. Hard changes are more applied to problems that have clear objectives and indicators, with a known cause of the problem. Soft changes are applied to larger problems that affect the entire organization or beyond it. The basic definition for sustainable development is: the future generations should have similar opportunities as the previous. The UN has set as a global goal an integration of education for sustainable development (ESD) at all levels of education during 2005- 2014. The goal is set also in universities, the graduates of which are future leaders for all labor markets. The objective for ESD in higher education is that graduates obtain the competence to take economic, social and environmental costs and benefits into account when making decisions. Knowledge outcomes should aim for systematic and holistic thinking, which requires cross disciplinary education. So far, the development of ESD has not achieved its goals. The UN has identified a need for more transdisclipnary research in ESD. A joint global requirement for universities is quality assurance, the aim of which is to secure and improve teaching and learning. Quality, environmental and integrated management systems are used by some universities for filling the quality assurance requirements. The goal of this thesis is to open up new ways for enhancing ESD in universities, beyond the forerunners; by exploring how management systems could be used as tools for promoting ESD. The thesis is based on five studies. In the first study, I focus on if and how tools for quality assurance could be benefitted for promoting ESD. It is written from a new perspective, the memetic, for reaching a diversity of faculty. A meme is an idea that diffuses from brain to brain. It can be applied for cultural evolution. It is a theory that is based on the evolutionary theory by Darwin, applied for social sciences. In the second Paper, I present the results from the development of the pilot process model for enhancing ESD with management systems. The development of the model is based on a study that includes earlier studies, a survey in academia and an analysis of the practice in 11 universities in the Nordic countries. In the third study, I explore if the change depends on national culture or if it is global. It is a comparative study on both policy and implementation level, between the Nordic countries and China. The fourth study is a single case study based on change management. In this study, I identify what to consider in order to enable the change: enhancing ESD with tools for quality assurance in universities. In the fifth Paper, I present the results of the process model for enhancing ESD with management systems. The model was compared with identified drivers and barriers for enhancing ESD and for implementing management systems. Finally, the process model was piloted and applied for identifying sustainability aspects in curricula. Action research was chosen as methodology because there are not already implemented approaches using quality management for promoting ESD, why the only way to study this is to make it happen. Another reason for choosing action research is since it is essential to involve students and faculty for enhancing ESD. Action based research consists of the following phases: a) diagnosing, b) planning action, c) taking action and d) evaluating action. This research was made possible by a project called Education for Sustainable Development in Academia in the Nordic countries, ESDAN, in which activities were divided into these four phases. Each phase ended with an open seminar, where the results of the study were presented. The objective for the research project was to develop a process for including knowledge in sustainable development in curricula, which could be used in the quality assurance work. Eleven universities from the Nordic countries cooperated in the project. The aim was, by applying the process, to identify and publish examples of relevant sustainability aspects in different degree programs in universities in the Nordic countries. The project was partly financed by the Nordic Council of Ministers and partly by the participating pilot universities. Based on the results of my studies, I consider that quality, environmental and integrated management systems can be used for promoting ESD in universities. Relevant sustainability aspects have been identified in different fields of studies by applying the final process model. The final process model was compared with drivers and barriers for enhancing ESD and for implementing management systems in universities and with succeeding with management systems in industry. It corresponds with these, meaning that drivers are taken into account and barriers tackled. Both ESD and management systems in universities could be considered successful memes, which can reflect an effective way of communication among individuals. I have identified that management systems could be used as tools for hard changes and to support the soft change of enhancing ESD in universities with management system. Based on the change management study I have summarized recommendations on what to consider in order to enable the studied change. The main practical implications of the results are that the process model could be applied for assessment, benchmarking and communication of ESD, connected to quality assurance, when applied. This is possible because the information can be assembled in one picture, which facilitates comparison. The memetic approach can be applied for structuring. It is viable to make comparative studies between cultures, for getting insight in special characteristics of the own culture. Action based research is suitable for involving faculty. Change management can be applied for planning a change, which both enhancing ESD and developing management systems are identified to be.

The requirements of a feasible plastic packaging material for cultured dairy products

The objective of this Master´s Thesis was to conduct a wide scale preliminary survey regarding the package requirements of a cultured dairy package, and to compare the currently used material polystyrene to other suitable packaging materials. Polystyrene has a long history of use in dairy cups, but in recent years its price has increased significantly compared to other common packaging materials. The overall environmental effects of a package and a package material are today a part of designing a sustainable product life cycle. In addition, in certain contexts there has been discussion of the risks posed by styrene polymer for the environment and for humans. These risks are also discussed in this thesis. Polystyrene (PS) is still the most widely used material in dairy cups. In recent years, polypropylene (PP) cups have appeared in increasing numbers on market shelves. This study focuses on the differences of the suitable polymers and examines the suitability of alternative “suitable” polymers with regards to dairy packaging. Aside from focusing on the cup manufacturer, this thesis also examines its subject matter from the viewpoint of the dairy customer, as well as observing the concrete implications of material changes in the overall value chain. It was known in advance that material permeability would be one of the determining factors and that gas transmission testing would be a significant part of the thesis. Mechanical tests were the second part of the testing process, providing information regarding package strength and protectiveness during the package’s life cycle. Production efficiency, along with uninterrupted stable production, was another important factor that was taken into consideration. These two issues are sometimes neglected in similar contexts due to their self-evident nature. In addition, materials used in production may have a surprising significance to the production and efficiency. Consistent high quality is also partly based on material selection. All of the aforementioned factors have been documented and the results have been analyzed by the development team at Coveris Rigid Finland. Coveris is now calculating the total finance effects and capacities should the material changes be implemented in practice. There are many factors in favor of switching to polypropylene at the moment. The overall production costs, as well as the environmental effects of resin production are the primary influences for said switch from the converters’ perspective.

Forming i barnehagen i lys av Reggio Emilias atelierkultur

Forming (Arts and crafts) and children’s creative action with materials and tools are less in use in the kindergarten than before. Political focus on children’s early learning has led to shifts in kindergartens toward other specific disciplines, and requirements for individual testing also of the smallest children’s competencies within these. Kindergarten teachers, educators, researchers and participants in social debate have pointed out that there are epistemological contradictions in descriptions of kindergarten quality as well as between current kindergarten policy documents and requirements for the kindergartens’ staff. Meanwhile, the content and methods in many kindergartens are inspired by practice and philosophy in the municipal kindergartens in Reggio Emilia, Italy. Correlation between kindergartens’ formingprojects and experiences from Reggio Emilia is actualized in particular through the workshop and the studio’s role in children’s learning processes. One starting point for the thesis’ problem area is a documented need for more knowledge about kindergarten’s educational content. The overarching goal of the thesis is to develop new knowledge about how learning takes place in kindergarten through examining the field of forming in kindergartens inspired by Reggio Emilia’s atelier culture. The thesis is theoretically anchored within pragmatism, and ties kindergarten’s aesthetic operations with materials and tools to socio-cultural perspective, social constructivism and post humanistic theory. The empirical material is obtained through a qualitative study with ethnography as methodological approach. The fieldwork is conducted in kindergarten, with two leading research questions: 1) How is atelierism perceived and unfolded in Norwegian Reggio Emilia-inspired kindergartens, and 2) how is forming perceived and unfolded in Norwegian Reggio Emilia-inspired kindergartens. A comprehensive and multifaceted material is analyzed, and the results are presented in the form of three themes: The physical environment, Relations and actions in interplay, and Expression forms and forms of expression. Each of these topics are supported by examples from kindergartens’ adult voices and the constructed empirical material. Insights into how learning takes place in the kindergarten subject of forming with inspiration from the Reggio Emilia atelier culture is discussed in the tension between educational philosophy, Nordic kindergarten tradition and neoliberal trends that kindergarten teachers must adhere to. Learning potentials in children’s opportunities for action in forming in light of the atelier appears in the results of the empirical study. The educational context described is characterized by experimental and playful actions where children’s sensations, curiosity and resistance are interacting with the identity of materials and tools. The results imply aesthetic, ethical, democratic and ecological reflections, which are also valid on a practical action level. The thesis contributes to description and understanding of kindergarten’ content and young children’s learning, the importance of atelier culture as inspiration for the kindergarten, and the further development of methodology and documentation of knowledge expressions.

Asleep or not asleep? Evaluation of the Quality of Patients’ Sleep in Critical Care Nursing

Sleep is important for the recovery of a critically ill patient, as lack of sleep is known to influence negatively a person’s cardiovascular system, mood, orientation, and metabolic and immune function and thus, it may prolong patients’ intensive care unit (ICU) and hospital stay. Intubated and mechanically ventilated patients suffer from fragmented and light sleep. However, it is not known well how non-intubated patients sleep. The evaluation of the patients’ sleep may be compromised by their fatigue and still position with no indication if they are asleep or not. The purpose of this study was to evaluate ICU patients’ sleep evaluation methods, the quality of non-intubated patients’ sleep, and the sleep evaluations performed by ICU nurses. The aims were to develop recommendations of patients’ sleep evaluation for ICU nurses and to provide a description of the quality of non-intubated patients’ sleep. The literature review of ICU patients’ sleep evaluation methods was extended to the end of 2014. The evaluation of the quality of patients’ sleep was conducted with four data: A) the nurses’ narrative documentations of the quality of patients’ sleep (n=114), B) the nurses’ sleep evaluations (n=21) with a structured observation instrument C) the patients’ self-evaluations (n=114) with the Richards-Campbell Sleep Questionnaire, and D) polysomnographic evaluations of the quality of patients’ sleep (n=21). The correspondence of data A with data C (collected 4–8/2011), and data B with data D (collected 5–8/2009) were analysed. Content analysis was used for the nurses’ documentations and statistical analyses for all the other data. The quality of non-intubated patients’ sleep varied between individuals. In many patients, sleep was light, awakenings were frequent, and the amount of sleep was insufficient as compared to sleep in healthy people. However, some patients were able to sleep well. The patients evaluated the quality of their sleep on average neither high nor low. Sleep depth was evaluated to be the worst and the speed of falling asleep the best aspect of sleep, on a scale 0 (poor sleep) to 100 (good sleep). Nursing care was mostly performed while the patients were awake, and thus the disturbing effect was low. The instruments available for nurses to evaluate the quality of patients’ sleep were limited and measured mainly the quantity of sleep. Nurses’ structured observatory evaluations of the quality of patients’ sleep were correct for approximately two thirds of the cases, and only regarding total sleep time. Nurses’ narrative documentations of the patients’ sleep corresponded with patients’ self-evaluations in just over half of the cases. However, nurses documented several dimensions of sleep that are not included in the present sleep evaluation instruments. They could be classified according to the components of the nursing process: needs assessment, sleep assessment, intervention, and effect of intervention. Valid, more comprehensive sleep evaluation methods for nurses are needed to evaluate, document, improve and study patients’ quality of sleep.

Empirical studies on software quality construction: Exploring human factors and organizational influences

Software quality has become an important research subject, not only in the Information and Communication Technology spheres, but also in other industries at large where software is applied. Software quality is not a happenstance; it is defined, planned and created into the software product throughout the Software Development Life Cycle. The research objective of this study is to investigate the roles of human and organizational factors that influence software quality construction. The study employs the Straussian grounded theory. The empirical data has been collected from 13 software companies, and the data includes 40 interviews. The results of the study suggest that tools, infrastructure and other resources have a positive impact on software quality, but human factors involved in the software development processes will determine the quality of the products developed. On the other hand, methods of development were found to bring little effect on software quality. The research suggests that software quality is an information-intensive process whereby organizational structures, mode of operation, and information flow within the company variably affect software quality. The results also suggest that software development managers influence the productivity of developers and the quality of the software products. Several challenges of software testing that affect software quality are also brought to light. The findings of this research are expected to benefit the academic community and software practitioners by providing an insight into the issues pertaining to software quality construction undertakings.

Toimittajien suorituskykymittariston suunnittelu ja toteutus

Tämän diplomityön tarkoituksena oli kehittää teollisuusyrityksen toimittajahallintaa suorituskykymittauksen avulla. Työssä suunnitellaan ja toteutetaan toimittajien suorituskykymittaristo teoriatiedon avulla. Projektin lopputuloksena case-yrityksellä on käytössään kokonaisvaltainen toimittajien suorituskykymittaristo ja kehittyneet toimittajahallinnan prosessit. Työn teoriaosuudessa syvennytään erilaisiin suorituskykymittariston kehittämisen viitekehyksiin. Lisäksi teoriaosuudessa käsitellään hyvän suorituskykymittariston vaatimuksia ja suositeltuja mittauksen seuranta-alueita. Työn empiriaosuudessa rakennetaan suorituskykymittaristo vaihe vaiheelta perustuen tapaustutkimukseen. Kehitettyä suorituskykymittaristoa testattiin simulaatiovaiheen aikana case-yrityksen kolmella tehtaalla. Käyttäjäpalautteen perusteella mittaristo täytti teoriaosuudessa löydetyt tärkeimmät vaatimukset suorituskykymittaristolle. Mittaristo on helppokäyttöinen, visuaalinen ja sen raportoinnista saa arvokasta informaatiota toimittajien arviointiin. Diplomityön konkreettisia hyötyjä case-yritykselle ovat olleet laatupoikkeamien kehittynyt havaitseminen ja toimittajan hintakilpailukyvyn parantunut arviointi. Kaikkein merkittävin hyöty case-yritykselle on kuitenkin ollut systemaattinen toimittaja-arviointiprosessi, minkä suorituskykymittaristo mahdollistaa.